Bristol Commercial Vehicles

Last updated

Bristol Commercial Vehicles
Company typePrivately held company, later Public company
IndustryVehicle manufacture
Founded Bristol, England, 1908
Defunct1983
Key people
George White (founder)
Parent Bristol Tramways & Carriage Co

Bristol Commercial Vehicles was a vehicle manufacturer located in Bristol, England. Most production was of buses but trucks and railbus chassis were also built.

Contents

The Bristol Tramways and Carriage Company started to build buses for its own use in 1908 and soon started building vehicles for other companies. In 1955 this part of the business was separated out as Bristol Commercial Vehicles Limited. It closed in 1983 when production was moved to its then parent company Leyland.

History

The first trams of the Bristol Tramways Company ran in 1875, and in 1906 the company started to operate motor buses to bring extra passengers to their trams. In 1908 the company decided to build bus chassis for its own use, the first one entering service on 12 May. [1]

The Motor Department was initially based at the tram depot in Brislington, on the road that leads east from Bristol to Bath. The Car Building Works there had been responsible for erecting electric trams and had gone on to build horse-drawn vehicles for the company. The first motor bodies built there had been three charabanc bodies constructed in 1907 for the Thornycroft buses delivered the previous year. During 1907 the bus fleet was transferred to the tram depot at Filton to the north west of the city. [2] In 1908 the company built its first six buses. The chassis were erected by the Motor Department and three bodies each at Brislington and the company's carriage works in Leek Lane, north Bristol. [3]

Brislington tram depot, one of the sites used to build Bristol buses. Brislington old tram depot.jpg
Brislington tram depot, one of the sites used to build Bristol buses.

In 1910 the company decided to build aeroplanes, forming the British and Colonial Aeroplane Company, Ltd. The best place for this work was the sheds occupied by the Motor Department at Filton, so motor repairs and construction returned to Brislington. [4] The tram depot proved too small for the volume of work and so a new 4 acres (1.6 ha) site, to be known as the Motor Constructional Works, was purchased nearby in Kensington Hill, Brislington. [5]

In May 1914 it supplied its first bus to another operator, a C50 fitted out as a charabanc for Imperial Tramways at Middlesbrough. The two companies shared a chairman, Sir George White, who in January had taken some buses out of service in Bristol to send to Middlesbrough when a rival company had tried to start a competitive service. The Middlesbrough order was followed by a number of trucks for the Royal Navy Air Service. [6]

The Great Western Railway bought a controlling interest in the tramway company in 1929 but the bus interests of the railway were transferred to Western National in 1931. This brought Bristol Tramways and its manufacturing activities into the Tilling Group. [7] It was a policy decision by the Tilling Group to adopt the diesel engine as the standard power unit, which started a period of many decades of installing Gardner diesel engines to Bristol chassis. [8] Other companies in the group increasingly turned to Bristol to provide their chassis. Many Bristol chassis were taken to Eastern Coach Works (ECW) at Lowestoft, another member of the Tilling Group, where bodies were added. The un-bodied chassis were moved between the two towns by delivery drivers wearing substantial weatherproof suits. [9]

Bristol Commercial Vehicles (BCV) was created in 1943 as a subsidiary of Bristol Tramways. The Transport Act saw the nationalisation of the Tilling Group into the British Transport Commission (BTC) in 1948. BCV and ECW soon found themselves restricted to selling products to other BTC operators. [10] Nationalisation also brought the task of supervision of the Ministry of Supply's motor repair works at Kingswood. [11] In 1955 BCV became an independent company owned by the BTC. [10] Rationalisation of activities saw new body construction cease at Bristol in 1956. [12]

Changes in government policy in 1965 allowed the Leyland Motor Corporation to buy some shares in BCV and ECW so that their products could once again be sold to independent operators. [13] The last new chassis to carry a Bristol badge was a VRT/SL double-deck bus built in 1981. For a while the factory continued to build buses with Leyland badges, notably the Olympian which had been designed by the staff at Brislington. All work ended in October 1983 when the final Bristol-built Olympian chassis was sent to ECW to receive its body for Devon General (where it was registered A686 KDV). Work was then transferred to other Leyland factories. [13]

Products

Chassis

A VRT/SL of 1969 (centre left) and an FS of 1966 (centre right). Buses outside York Railway Station - geograph.org.uk - 1472769.jpg
A VRT/SL of 1969 (centre left) and an FS of 1966 (centre right).

Early chassis types were given a C-series number. [14] When a new lower frame was introduced in 1920 they were known simply by the capacity of the body that was designed to be fitted. From 1925 a sequential letter system was given that ran from A to M, although the M type never went into full production. This was replaced by a new series that used initials to describe the vehicle, such as 'RE' for 'rear engine'. [13]

Different chassis letter codes were used to identify different sizes of petrol engines, but with the introduction of diesel engines from 1933 the size and manufacturer was shown by a suffix to the main code. In this way LD5G denoted an LD with a five-cylinder Gardner engine and FS6B an FS with a six-cylinder Bristol engine, and so on. [13]

All early chassis were used for either single deck buses or goods vehicles. In 1931 a longer J type single deck chassis was offered to exploit the increased length now permissible but this was replaced by the L in 1937. In 1952 by a new Light Saloon was introduced which was built on integral principles. It had no true chassis but lightweight running units were fitted to a special ECW body that gave the bus its strength and rigidity. A more conventional Medium Weight chassis was offered from 1957. A larger single deck, the rear-engined RE, was produced in 1962 and shorter versions to replace the MW appeared in 1968 along with a Lightweight Horizontal engined chassis, to replace the SU midibus and sell to the private sector as a lightweight coach, the LH. [13]

The G was introduced in 1931 as a dedicated double deck chassis, but this was replaced by the K in 1937. Larger versions were offered as laws changed to allow an increase in both width and length, but in 1949 a radically different double deck prototype was tested. This had a specially designed chassis that allowed a conventional body to be fitted within the height of a 'lowbridge' profile, which with a conventional chassis was only possible with gangways below floor level and very restricted headroom inside. This prototype became the Lodekka which remained in production in various forms until 1968. By this time a rear-engine double deck, the VR was available. [13]

The last VRs and LHs were built in 1981 and the last REs in 1982, but production switched to Leyland-badged chassis. These included the B21 and B52 single deck urban bus chassis and the Olympian double deck.

Models

Note that the 'type' shown in the table below refers to the most common configuration. Double deck bus chassis were sometimes given single deck bodies, and bus chassis were often given goods bodies.

ModelIntroducedTypeLengthEngineNumber builtComments
C401908Single deck4 cylinder14Chain-drive transmission
C451912Single deck4 cylinder29
C601912Single deck4 cylinder19
C651913Single deck4 cylinder9
C501914Single deck4 cylinder53
4 ton1921Double deck22.8 feet (6.9 m)4 cylinder649Prototype built 1915 as W type. Later offered as 24.8 feet (7.6 m). BAE592-Bristol4ton.jpg
2 ton1923Single deck16.75 feet (5.11 m)4 cylinderFirst chassis with driving position alongside engine. Also offered as 18.25 feet (5.56 m). Bristol 2 ton chassis HU6618.jpg
A1925Double deck25.5 feet (7.8 m)4 cylinder23
B1926Single deck26 feet (7.9 m)4 cylinder778'Bristol Superbus'
C1929Double deck6 cylinder2Three-axle. Chassis prototypes never given bodies.
D1929Double deck26 feet (7.9 m)6 cylinder50
E1929 Trolleybus Electric2Three-axle
G1931Double deck26.5 feet (8.1 m)6 cylinder
H1931Single deck27.5 feet (8.4 m)4 cylinder106 Liskeard station - Western National 137 FJ8967.jpg
J1931Single deck27.5 feet (8.4 m)6 cylinder330
JO1933Single deck27.5 feet (8.4 m)Diesel606JO = J Oil, i.e. Diesel-engined Brislington BVBG Bristol 2355 AHU803 near side.jpg
GO1935Double deck26.5 feet (8.1 m)DieselGO = G Oil, i.e. Diesel-engined
K1937Double deck26 feet (7.9 m)Diesel2774 Bristol Harbourside 2015 - Bristol 3386 (JHT802).JPG
L1937Single deck27.5 feet (8.4 m)Diesel2426 District bus DB216 Bristol L5G ECW HHN 202 Metrocentre rally 2009 (3).JPG
LL1946Single deck30 feet (9.1 m)Diesel387LL = L Long. Export model until 1950. Southern Vectis 835 HDL 279 2.JPG
LWLSingle deck30 feet (9.1 m)Diesel401LWL = L Wide Long: wider version of LL chassis. Export model until 1950. Westpoint Southern National 1613 LTA772.jpg
KW1947Double deck26 feet (7.9 m)Diesel20KW = K Wide: wider version of K chassis.
M1948Diesel2The last of the purely alphabetic type codes. Chassis prototypes never given bodies.
KS1950Double deck27 feet (8.2 m)Diesel236KS = K Short, i.e. shorter than the proposed 30-foot KL (which was never produced). Engine flexibly mounted to the frame. Penzance Bus Station - Western National 994 (LTA813).jpg
KSW1950Double deck27 feet (8.2 m)Diesel1116KSW = K Short Wide: wider version of KS chassis. Bristol Harbourside - Bristol 8322 (UHY362).jpg
LS1950Single deck30 feet (9.1 m)Diesel1409LS = Light Saloon. Integral chassis and body. Brislington 2015 - Southern National 1781 (TUO497).JPG
HG1952Goods29.8 feet (9.1 m)Diesel517HG = Heavy Goods. An eight-wheel rigid vehicle.
SC1954Single deck27.5 feet (8.4 m)Diesel323SC = Small Capacity Lincolnshire bus 2485 Bristol SC4LK ECW OVL 494 Metrocentre rally 2009 (4).JPG
LD 1954Double deck27 feet (8.2 m)Diesel2180LD = Lo Dekka. Prototype tested from 1949. Southern Vectis 563 SDL 268 3.JPG
HA1955Goods14 feet (4.3 m)Diesel653HA = Heavy Articulated. A tractor for articulated vehicle (946 ST Semi Trailers were constructed), it was later built as 15 feet (4.6 m) long to accommodate a larger engine. BRS Bristol HA artic, Castle Combe.jpg
LDL 1957Double deck30 feet (9.1 m)DieselLonger version of LD chassis Minehead Western National 1936.jpg
MW 1957Single deckDiesel1965MW = Medium Weight Bristol Harbourside Bristol Omnibus 2939 929AHY.jpg
SUL 1960Single deck27.8 feet (8.5 m)Diesel156SUL = Small, Underfloor engine, Long Bishops Lydeard Southern National 624.jpg
SUS 1960Single deck24.2 feet (7.4 m)Diesel25SUS = Small, Underfloor engine, Short Brislington Western National 603 675COD.jpg
FLF 1960Double deckDiesel1867FLF = Flat-floor, long, Front entrance Hants & Dorset 1540 2.JPG
FL 1960Double deckDieselFL = Flat-floor, long (rear entrance). Discontinued in 1962. Eastern Counties bus LFL57 (557 BNG), 14 July 2002.jpg
FS 1960Double deck27 feet (8.2 m)Diesel890FS = Flat-floor, short (rear entrance) Southern Vectis 570 YDL 315.JPG
FSF Double deck27 feet (8.2 m)DieselFSF = Flat-floor, short, front entrance. Discontinued in 1962. Preserved Cheltenham & District bus 6037 (802 MHW) 1961 Bristol Lodekka FSF ECW, 11 May 2011.jpg
RELL 1962Single deck36 feet (11 m)Diesel2839RELL = Rear Engine, Long Low Eastern National 1516 FWC 439H.JPG
RELH 1962Single deck36 feet (11 m)Diesel976RELH = Rear Engine, Long High Red & White bus RC968 (OAX 9F), Showbus 2010.jpg
VRT/SL 1966Double deckDiesel4300 (approx.)VRT = Vertical Rear Transverse engine, Short Low Southern Vectis 621.JPG
VRT/LL Double deckDiesel107VRT = Vertical Rear Transverse engine, Long Low Eastern Counties Bristol VR LFS 303F.jpg
VRL/LH Double deckDiesel55VRL = Vertical Rear Longitudinal engine, Long, High Standerwick bus 60 (LRN 60J), Showbus 2010 (2).jpg
VRT/LH Double deckDiesel60VRT = Vertical Rear Transverse engine, Long High
RESL 1967Single deckDiesel698RESL = Rear Engine, Short Low North Western 299 KJA299G.jpg
RESH 1967Single deckDiesel11RESH = Rear Engine, Short High Southern Vectis 301 KDL 885F 2.JPG
REMH 1968Single deck39 feet (12 m)Diesel105REMH = Rear Engine, Maximum length, High
LH 1968Single deck30 feet (9.1 m)Diesel1505LH = Lightweight Horizontal engine Crosville SLL620 MCA620P (8717444374).jpg
LHS 1968Single deck26 feet (7.9 m)Diesel308LHS = Lightweight Horizontal engine, Short Southern Vectis 202.JPG
LHL 1968Single deck36 feet (11 m)Diesel174LHL = Lightweight Horizontal engine, Long

Engines

Bristol made their own petrol engines to power their chassis. Until 1929 these were all four-cylinder, but in that year a six-cylinder model was added to the range to power the new C and D models. The C failed to get past the prototype stage, but the D was joined in 1931 by the G and J which also used Bristol's six-cylinder JW engine. [15]

Bristol first offered a diesel-engined chassis in 1933. This was a JO single deck fitted with a Gardner five-cylinder engine. The GO double deck soon followed, but the petrol-engined J and G versions remained in the product range until 1936. [13] Bristol continued to source its diesel engines from Gardner and other suppliers. In 1938 they began to develop their own but a production model was not ready until after World War II. The 8.14-litre AVW engine was available in 1946 and an LSW horizontal version was produced for the LS integral single deck in 1950. Larger 8.9-litre BVW engines appeared in 1957. More than 4,000 diesel engines were eventually produced. [16]

Bodies

A Bristol K with a 1940 Bristol body Brislington BVBG Bristol C3336 GHT154.jpg
A Bristol K with a 1940 Bristol body

Bristol Tramways initially built bus and truck bodies at their Brislington Body Works which was on the same site as the Brislington tram depot. Low demand for new aircraft following World War I saw some bus and lorry bodies built in the aircraft factory at Filton, where the first bus chassis had been built. [17]

Most early Bristol chassis (and some of the few chassis that the company bought from others) had their bodies built by Bristol Tramways, but by the late 1930s most other operators were having bodies for their Bristol chassis built elsewhere. [18] One such outside coach factory was ECW in Lowestoft where they had been building bodies on Bristol chassis for United Automobile Services and other operators since 1929. [19] Bristol Tramways even had a batch of K5Gs bodied by ECW in 1938. [20]

After World War II Bristol's old angular body designs became more like the contemporary, more rounded ECW designs. After nationalisation ECW built bodies for most of Bristol's output. [18] In 1955 it was decided that body production at Brislington would cease. The designs for the HA lorry cab were handed over to Longwell Green Coachworks, a company based near Bristol. All work had been transferred there by 28 May 1956. [12]

Other products

In October 1913 a mobile workshop was built to repair aircraft in the field. A 'large bus body' was equipped with an electric generator which powered a lathe, bandsaw, drills, shaping machine, grindstone and lights. One of the two drills was on a long lead so that it could be used outside the workshop. It was also equipped with work benches, furnace and anvil. It was driven to the Paris Aircraft Show. It was sold to the Royal Naval Air Service in 1914. [21]

More than 1,000 aircraft were built at the Motor Constructional Works to supplement the work of the regular Bristol Aeroplane Company factory at Filton during World War I. [16] Again during World War II Brislington was tasked with manufacturing products to support the war. The fuselages for 1,300 Bristol Beaufighters and 120 Bristol Buckinghams were built and sent to Filton for fitting out. It built gas producer equipment to enable buses and trucks to use anthracite as a fuel. It also produced aircraft and tank components, shells, searchlight generators and other military equipment. [22]

Brislington product's became more diverse after nationalisation. Heavy goods vehicles were designed and built for British Road Services in both rigid eight-wheel [23] and articulated form. [24] A few bus chassis were also fitted out as lorries, as they had done since the earliest days of the factory. [25] A prototype container transporter for British Railways and a light anti-aircraft gun carriage for the Ministry of Defence also made use of BCV's expertise in road vehicle manufacture. [11]

Bristol provided the chassis for two railbuses in 1958. Each used a Gardner 112 horsepower (84 kW) engine and a hydraulic automatic transmission. The bodywork was built by ECW. They were used on branch lines in Scotland, but no further orders were placed and the pair were withdrawn and scrapped in 1966.

See also

Related Research Articles

Brush Traction was a manufacturer and maintainer of railway locomotives in Loughborough, England whose operations have now been merged into the Wabtec company's Doncaster UK operations.

<span class="mw-page-title-main">East Anglia Transport Museum</span> British open-air transport museum

The East Anglia Transport Museum is an open-air transport museum, with numerous historic public transport vehicles. It is located in Carlton Colville a suburb of Lowestoft, Suffolk. It is the only museum in the country where visitors can ride on buses, trams and trolleybuses, as well as a narrow-gauge railway.

<span class="mw-page-title-main">Albion Motors</span> Former Scottish vehicle manufacturer

Albion Motors was a Scottish automobile and commercial vehicle manufacturer.

<span class="mw-page-title-main">Leyland Titan (front-engined double-decker)</span> British double-decker chassis with front-mounted engine

The Leyland Titan was a forward-control chassis with a front-mounted engine designed to carry double-decker bus bodywork. It was built mainly for the United Kingdom market between 1927 and 1942, and between 1945 and 1969.

<span class="mw-page-title-main">Leyland Olympian</span> 2-axle and 3-axle double-decker bus chassis manufactured by Leyland

The Leyland Olympian was a 2-axle and 3-axle double-decker bus chassis manufactured by Leyland between 1980 and 1993. It was the last Leyland bus model in production.

<span class="mw-page-title-main">Guy Motors</span>

Guy Motors was a Wolverhampton-based vehicle manufacturer that produced cars, lorries, buses and trolleybuses. The company was founded by Sydney S. Guy (1885–1971) who was born in Kings Heath, Birmingham. Guy Motors operated out of its Fallings Park factory from 1914 to 1982, playing an important role in the development of the British motor industry.

<span class="mw-page-title-main">Leyland Atlantean</span> Rear engined double decker bus

The Leyland Atlantean is a predominantly double-decker bus chassis manufactured by Leyland Motors between 1958 and 1986. Only 17 Atlantean chassis were bodied as single deck from new.

<span class="mw-page-title-main">Bristol VR</span> British rear-engined double-decker bus chassis

The Bristol VR was a rear-engined double-decker bus chassis which was manufactured by Bristol Commercial Vehicles as a competitor to the Leyland Atlantean and Daimler Fleetline.

<span class="mw-page-title-main">Bristol Lodekka</span> British low-height double-decker bus

The Bristol Lodekka was a half-cab low-height step-free double-decker bus built by Bristol Commercial Vehicles in England. It was the first production bus design to have no step up from the passenger entrance throughout the lower deck; although Gilford and Leyland Motors had developed low floor city buses in the 1930s, these did not enter production.

<span class="mw-page-title-main">Charles H. Roe</span> British bus manufacturing company

Charles H Roe was a Yorkshire coachbuilding company. It was for most of its life based at Crossgates Carriage Works, in Leeds.

<span class="mw-page-title-main">Ipswich Transport Museum</span>

The Ipswich Transport Museum is a museum in Ipswich, Suffolk, England, devoted principally to the history of transport and engineering objects made or used in its local area.

Eastern Coach Works was a bus and train bodybuilder based in Lowestoft, England.

Sir George White, 1st Baronet (1854–1916), was an English businessman and stockbroker based in Bristol. He was instrumental in the construction of the Bristol tramways and became a pioneer in the construction of electric tramways in England. In 1910 he formed, with his brother Samuel, the Bristol Aeroplane Company. He had many other interests, particularly in transport companies.

<span class="mw-page-title-main">Bristol Omnibus Company</span> Defunct public transportation company based in Bristol, UK (1887–1987)

The Bristol Omnibus Company was a dominant bus operator in Bristol, and was one of the oldest bus companies in the United Kingdom. It ran buses over a wide area of Gloucestershire, Somerset, Wiltshire and neighbouring counties.

<span class="mw-page-title-main">Bristol RE</span> Motor vehicle

The Bristol RE was a rear-engined single-decker bus or single-decker coach chassis built by Bristol Commercial Vehicles from 1962 until 1982. It is often considered the most successful of the first generation of rear-engined single-decker buses.

<span class="mw-page-title-main">Bristol MW</span> Motor vehicle

The Bristol MW is a bus and coach chassis. designed and built between 1956 and 1966 by Bristol Commercial Vehicles in Brislington, Bristol.

<span class="mw-page-title-main">Trolleybuses in Doncaster</span>

The Doncaster trolleybus system once served the town of Doncaster, South Yorkshire, England. Opened on 22 August 1928, it gradually replaced the Doncaster Corporation Tramways. By the standards of the various now-defunct trolleybus systems in the United Kingdom, the Doncaster system was a moderately sized one, with a total of 6 routes, all radiating out from the town centre, and a maximum fleet of 47 trolleybuses. The Bentley route was the first to close, on 12 February 1956, and the Beckett Road route was the last to go, on 14 December 1963.

<span class="mw-page-title-main">Open top buses in Weston-super-Mare</span>

Open top buses in Weston-super-Mare, Somerset, England, were introduced in 1950 and have run along the sea front most summers since. The initial operator was Bristol Tramways and this company's successors continued to provide services until 2013. The route from Weston-super-Mare railway station to Sand Bay is operated by First West of England. From time-to-time open top buses have also provided scenic tours in and around the town.

<span class="mw-page-title-main">Bristol LH</span> Motor vehicle

The Bristol LH was a single-decker bus chassis built by Bristol Commercial Vehicles (BCV) in Bristol, England. Nearly 2,000 were built between 1967 and 1982 in a variety of sizes and body types, including some as goods vehicles.

<span class="mw-page-title-main">Sunbeam Commercial Vehicles</span>

Sunbeam Commercial Vehicles was a commercial vehicle manufacturing offshoot of the Wolverhampton based Sunbeam Motor Car Company when it was a subsidiary of S T D Motors Limited. Sunbeam had always made ambulances on modified Sunbeam car chassis. S T D Motors chose to enter the large commercial vehicle market in the late 1920s, and once established they made petrol and diesel buses and electrically powered trolleybuses and milk floats. Commercial Vehicles became a separate department of Sunbeam in 1931.

References

  1. Hulin, P (June 1974a). "Bristol Centenary Year". Buses. Vol. 24, no. 231. Ian Allan. pp. 205–207.
  2. James 2005, p. 36.
  3. James 2005, pp. 40–41.
  4. Hulin, P (1974b). "Bristol's Buses". In Cooper, Brian T (ed.). The People's Carriage. Bristol: Bristol Omnibus Company. pp. 33–34.
  5. James 2005, pp. 58–59.
  6. James 2005, p. 82.
  7. Hulin 1974a, p. 209.
  8. The First Fifty Years- BCV published souvenir booklet 1963.
  9. Doggett 1987.
  10. 1 2 Hulin 1974b, pp. 41–45.
  11. 1 2 Mathieson, John (1974). "The Years of Expansion". In Cooper, Brian T (ed.). The People's Carriage. Bristol: Bristol Omnibus Company. pp. 63–72.
  12. 1 2 James & Sposito n.d., p. 39.
  13. 1 2 3 4 5 6 7 Macfarlane, Allan (1998). History of Bristol Commercial Vehicles. The Bristol Interest Circle. Archived from the original on 23 November 2009. Retrieved 2 September 2009.
  14. James 2005, pp. 108–112.
  15. Hulin 1974b, pp. 37–38.
  16. 1 2 Hulin 1974b, p. 41.
  17. James & Sposito n.d., p. 13.
  18. 1 2 Doggett, Maurice; Townsin, Alan (1994). ECW 1965–1987. Glossop: Venture Publications. pp. 125–127. ISBN   1-898432-11-2.
  19. Doggett 1987, pp. 27.
  20. Doggett 1987, pp. 109.
  21. James 2005, p. 77.
  22. Hulin 1974b, p. 39–41.
  23. James & Sposito n.d., pp. 29–46.
  24. James & Sposito n.d., pp. 49–57.
  25. James & Sposito n.d., p. 59.

Further reading