Developing tank

Last updated
A Paterson System 4 developing tank Developing Tank 8193.jpg
A Paterson System 4 developing tank

A developing tank is a light-tight container used for developing film. [1] A developing tank allows photographic film to be developed in a daylight environment. This is necessary because most film is panchromatic and therefore can not be exposed to any light during processing. [2] Depending upon the size and type, a developing tank can hold one to many roll or sheet films. Famous brands include Paterson, Yankee, Jobo and Nikor.

Contents

Stainless steel film reel for 35 mm film 35mm ss filmreel.jpg
Stainless steel film reel for 35 mm film

A film reel holds roll films in a spiral shape. The film is held evenly spaced so that the chemicals in the developing tank reach all of the film.

Types

Minox daylight developing tank Minoxtank.jpg
Minox daylight developing tank
Meopta 16mm development tank Meopta 16mm development tank.jpg
Meopta 16mm development tank

General

General tank support 110,126,135,120,620 format films Developing tanks and film reels for roll films come in two varieties: plastic and stainless steel. With stainless steel reels, the film is clipped to the center and then gently pinched while the reel is turned so that the film falls into the reel's grooves. With a plastic reel, the film is loaded from the outside and then wound onto the reel by rotating the reel with a back-and-forth motion.

Special purpose

Film reel for 4 x 5" sheet film. -50 reel.jpg
Film reel for 4 x 5" sheet film.

Use

Jobo 16mm/110 dueset plastic reel Jobo16reel.jpg
Jobo 16mm/110 dueset plastic reel

The user begins by opening the film canister (in the case of 35 mm film) or separating the film from a paper backing (in the case of medium format film, e.g. 120/220 format). The film is then loaded onto a film reel in a completely dark environment; this can be a light-tight room or a changing bag. Care must be taken during this step, as improperly loading the film may result in parts of the film not getting developed. Once the film is on the reel it is put into the developing tank, and then a lid is placed on the developing tank. Because the lid prevents light from reaching the film, the rest of the film developing process may be carried out in daylight. In addition to protecting the film from light, the lid contains an opening for rapidly pouring liquids into and out of the developing tank. Finally, a separate cap seals the canister, which prevents the contents of the tank from spilling when agitated by inverting the tank. But the tank should be cleaned by water every time after development as any residual fixer may not lead to proper development of the next film.

Related Research Articles

<span class="mw-page-title-main">Film stock</span> Medium used for recording motion pictures

Film stock is an analog medium that is used for recording motion pictures or animation. It is recorded on by a movie camera, developed, edited, and projected onto a screen using a movie projector. It is a strip or sheet of transparent plastic film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast and resolution of the film. The emulsion will gradually darken if left exposed to light, but the process is too slow and incomplete to be of any practical use. Instead, a very short exposure to the image formed by a camera lens is used to produce only a very slight chemical change, proportional to the amount of light absorbed by each crystal. This creates an invisible latent image in the emulsion, which can be chemically developed into a visible photograph. In addition to visible light, all films are sensitive to X-rays and high-energy particles. Most are at least slightly sensitive to invisible ultraviolet (UV) light. Some special-purpose films are sensitive into the infrared (IR) region of the spectrum.

<span class="mw-page-title-main">Camera</span> Optical device for recording images

A camera is an optical instrument that captures images. Most cameras can capture 2D images, while some more advanced models can capture 3D images. At a basic level, most cameras consist of a sealed box, with a small hole that allows light to pass through and capture an image on a light-sensitive surface. Cameras have various mechanisms to control how light falls onto the light-sensitive surface, including lenses that focus the light and a shutter that determines the amount of time the photosensitive surface is exposed to the light.

<span class="mw-page-title-main">135 film</span> Photographic film format

135 film, more popularly referred to as 35 mm film or 35 mm, is a format of photographic film used for still photography. It is a film with a film gauge of 35 mm (1.4 in) loaded into a standardized type of magazine – also referred to as a cassette or cartridge – for use in 135 film cameras. The engineering standard for this film is controlled by ISO 1007 titled '135-size film and magazine'.

<span class="mw-page-title-main">120 film</span> Medium format roll film

120 is a film format for still photography introduced by Kodak for their Brownie No. 2 in 1901. It was originally intended for amateur photography but was later superseded in this role by 135 film. 120 film survives to this day as the only medium format film that is readily available to both professionals and amateur enthusiasts.

<span class="mw-page-title-main">Minox</span> German camera manufacturer

Minox is a manufacturer of cameras, known especially for its subminiature camera.

<span class="mw-page-title-main">Medium format</span> Photographic cameras with an aspect ratio in the range of about four to ten centimeters edge length

Medium format has traditionally referred to a film format in photography and the related cameras and equipment that use film. Nowadays, the term applies to film and digital cameras that record images on media larger than the 24 mm × 36 mm used in 35 mm photography, but smaller than 4 in × 5 in.

<span class="mw-page-title-main">Photographic processing</span> Chemical process that transforms a latent image into a visible image

Photographic processing or photographic development is the chemical means by which photographic film or paper is treated after photographic exposure to produce a negative or positive image. Photographic processing transforms the latent image into a visible image, makes this permanent and renders it insensitive to light.

<span class="mw-page-title-main">Subminiature photography</span>

Subminiature photography is photographic technologies and techniques working with film material smaller in size than 35mm film, such as 16mm, 9.5mm, 17mm, or 17.5mm films. It is distinct from photomicrography, photographing microscopic subjects with a camera which is not particularly small.

<span class="mw-page-title-main">Holga</span> 120 film camera

The Holga is a medium format 120 film camera, made in Hong Kong, known for its low-fidelity aesthetic.

Sheet film is large format and medium format photographic film supplied on individual sheets of acetate or polyester film base rather than rolls. Sheet film was initially supplied as an alternative to glass plates. The most popular size measures 100 mm × 130 mm ; smaller and larger sizes including the gigantic 510 mm × 610 mm have been made and many are still available today.

<span class="mw-page-title-main">Negative (photography)</span> Image on photographic film

In photography, a negative is an image, usually on a strip or sheet of transparent plastic film, in which the lightest areas of the photographed subject appear darkest and the darkest areas appear lightest. This reversed order occurs because the extremely light-sensitive chemicals a camera film must use to capture an image quickly enough for ordinary picture-taking are darkened, rather than bleached, by exposure to light and subsequent photographic processing.

<span class="mw-page-title-main">Darkroom</span> Room which can be made fully dark to allow for development of photographs and film

A darkroom is used to process photographic film, to make prints and to carry out other associated tasks. It is a room that can be made completely dark to allow the processing of the light-sensitive photographic materials, including film and photographic paper. Various equipment is used in the darkroom, including an enlarger, baths containing chemicals, and running water.

<span class="mw-page-title-main">Contact print</span> Photographic image produced directly from film

A contact print is a photographic image produced from film; sometimes from a film negative, and sometimes from a film positive or paper negative. In a darkroom an exposed and developed piece of film or photographic paper is placed emulsion side down, in contact with a piece of photographic paper, light is briefly shone through the negative or paper and then the paper is developed to reveal the final print.

<span class="mw-page-title-main">Canister shot</span> Class of ammunition used by artillery

Canister shot is a kind of anti-personnel artillery ammunition. Canister shot has been used since the advent of gunpowder-firing artillery in Western armies. However, canister shot saw particularly frequent use on land and at sea in the various wars of the 18th and 19th century. Canister is still used today in modern artillery.

<span class="mw-page-title-main">Changing bag</span>

A changing bag is a photographic bag specifically designed to be light-proof while in use. It is required for certain applications involving photosensitive materials when a darkroom is not available, like in the field. Common usages include removing film from its canister to put it into a developing tank, or loading and unloading sheet film holders. They are also commonly found on the set of a film, where the clapper loader may need one if shooting on location or far away from a darkroom.

A film holder is a accessory that holds one or more pieces of photographic film, for insertion into a camera or optical scanning device such as a dedicated film scanner or a flatbed scanner with film scanning capabilities. The widest use of the term refers to a device that holds sheet film for use in large format cameras, but it can also refer to various interchangeable devices in medium format or even 135 film camera systems.

<span class="mw-page-title-main">Analog photography</span> Non-digital photography that uses film or chemical emulsions

Analog photography, known as film photography, is an incorrect term for photography that uses chemical processes to capture an image, typically on paper, film or a hard plate. Analog is a word used to define what a video signal was before digital came along. These photographic processes were the only methods available to photographers for more than a century prior to the invention of digital photography, which uses electronic sensors to record images to digital media.

<span class="mw-page-title-main">Photographic film</span> Film used by film (analog) cameras

Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast, and resolution of the film.

<span class="mw-page-title-main">Dark slide (photography)</span> Large format photography equipment

In photography, a dark slide is a wooden or metal plate that covers the sensitized emulsion side of a photographic plate. In use, a pair of plates joined back to back were used with both plates covered with a dark slide. When used, the dark slide is removed for the period of the exposure and then replaced. Modern dark slides are used in conjunction with a film holder, that either holds in place pieces of cut sheet film or, if modified, some piece of light sensitive material such as glass.

<span class="mw-page-title-main">Film can</span> Container used to enclose film stock

A film can is the light-tight container used to enclose film stock. They are typically a circular box pressed from thin sheet metal, but plastic examples are also used. Film cans are used to hold unexposed film, exposed film ready for developing and also for the distribution of completed film prints. The last of these does not require the can to be light-tight, but environmental protection and exclusion of dust makes a similar container just as useful.

References

  1. Anchell, Stephen G. (2020). The film developing cookbook. Bill Troop (2nd ed.). New York. ISBN   978-1-315-46845-7. OCLC   1125275035.
  2. Popular Mechanics. Hearst Magazines. July 1950. p. 194.