Explorer 23

Last updated

Explorer 23
Explorer-13.jpg
Explorer 23 satellite
NamesS-55C
NASA S-55C
Mission type Micrometeoroid research
Operator NASA
COSPAR ID 1964-074A
SATCAT no. 00924
Mission duration1 year (achieved)
Spacecraft properties
SpacecraftExplorer S-55
Bus S-55
Manufacturer Goddard Space Flight Center
Launch mass133.8 kg (295 lb)
Dimensions61 × 192 cm (24 × 76 in) cylinder
Power Solar cells and nickel-cadmium batteries
Start of mission
Launch date6 November 1964, 12:02:01 GMT [1]
Rocket Scout X-1 (S-133R)
Launch site Wallops Flight Facility, LA-3
Contractor Vought
Entered service6 November 1964
End of mission
Last contact7 November 1965
Decay date29 June 1983
Orbital parameters
Reference system Geocentric orbit [2]
Regime Low Earth orbit
Perigee altitude 451 km (280 mi)
Apogee altitude 865 km (537 mi)
Inclination 51.90°
Period 97.90 minutes
Instruments
Cadmium Sulfide Cells
Capacitor Detectors
Impact Detectors
Pressurized Cells
Explorer program
 

Explorer 23 (also called S-55C) was the last of three S-55 NASA micrometeoroid satellites launched as part of the Explorer program. Its purpose was to obtain data on the near-earth meteoroid environment, thus providing an accurate estimate of the probability of penetration in spacecraft structures by meteoroids and allowing a more confident definition of the penetration flux-material thickness relation to be derived. [3]

Contents

Spacecraft

The cylindrically shaped spacecraft, about 61 cm × 234 cm (24 in × 92 in), was built around the burned-out fourth stage of the Scout launch vehicle, which remained as part of the orbiting satellite. Explorer 23 carried stainless steel pressurized-cell penetration detectors, impact detectors, and cadmium sulfide cell detectors to obtain data on the size, number, distribution, and momentum of dust particles in the near-earth environment. In addition, the spacecraft was designed to provide data on the effects of the space environment on the operation of capacitor penetration detectors and solar cell power supplies. The spacecraft mass, neglecting the fourth stage vehicle hardware and motor, was 133.8 kg (295 lb). [3]

Experiments

Cadmium Sulfide Cells

The objective of this experiment was to determine the size of penetrating meteoroids by measuring the size of holes produced by the impacts in two thicknesses of a plastic film using two light-sensitive Cadmium Sulfide (CdS) cells. The cells were both mounted on the forward face of the spacecraft, one beneath a sheet of 6.35-micron-thick PET film and the other beneath a sheet of 3.18-micron-thick PET film. Each detector provided 24-cm2 of surface area exposed to meteoroids. Each sheet of PET film had a thin coating of aluminum deposited on both sides. Penetration of the aluminized PET sheets would allow sunlight (direct or reflected) to illuminate the cell and reduce its resistance, the cell being calibrated to relate the resistance change to accumulative hole sizes in the PET film. Prior to liftoff, all detectors were functioning properly; however, on the first interrogation made shortly after fourth stage burnout, it was found that the CdS cells were saturated with light. Apparently the aluminized PET film covers were damaged during launch, preventing data acquisition. [4]

Capacitor Detectors

The purpose of the experiment was to determine whether the space radiation environment had any adverse effects on the operation of the capacitor as a meteoroid-penetration detector. Observations in the laboratory indicated that energetic electrons in space might collect in the dielectric and produce false penetration counts. The instrumentation consisted essentially of two capacitors made up of a thin film polymer dielectric (bilaminate 3.8-micron thick, half-hard, type 302), which served as one electrode. A copper layer, about 0.65-micron thick, was vacuum-deposited on the outer surface of the dielectric, thus permitting it to serve as the second electrode. The capacitors were each mounted on a 0.63-cm-thick layer of polyurethane foam support by means of a 2.5-micron adhesive. The foam support, in turn, was seated in a laminated fiberglass tray that served as the mounting fixture. A penetration into the charged capacitor by a projectile caused the capacitor to be momentarily shorted and discharged. This discharge was detected and stored in a counter for later transmission. The conduction path dissipated in less than 1 microsecond and allowed the capacitor to recharge and detect any additional penetrations. Two discharges were recorded for one of the detectors during the 365-day lifetime of the experiment (6 November 1964 to 5 November 1965). No discharges were recorded for the second capacitor. More refined laboratory tests, however, revealed that the number of radiation-induced pulses would be about the same as or less than the number resulting from actual punctures, thus making it difficult, if not impossible, to distinguish between the two. Hence, the origin of the two counts (electron or meteoroid) could not be determined. It was determined from the data, however, that any radiation-induced pulses greater than 2 volts were at a minimum and would not likely affect the meteoroid flux data to any great extent, particularly when the penetration rates were relatively high. [5]

Impact Detectors

The mass distribution of meteoroids in space was determined by an impact-detection system consisting of 24 triangular 0.13-cm-thick 6061 aluminium alloy sounding boards. Each one had a piezoelectric transducer mounted on the center of the sounding board underside. The detectors provided 144-cm2 of area exposed to meteoroids. Four groups of six electrically parallel sounding boards were mounted around the periphery of the spacecraft. When a meteoroid impacted on a sounding board, an electrical signal was produced from the transducer. It was then amplified, threshold-detected, counted, and stored until readout. The amplifier for each group had three stages of amplification, which corresponded to three levels of momentum—low, medium, and high. By assigning a velocity to the particles impacting on the sounding boards in space, the system output was directly related to the threshold levels of particle mass. The system sensitivity was adjusted during final calibrations so that all 24 sounding boards acted as a single detector for all three sensitivity levels. The momentum threshholds obtained by calibration for the low, medium, and high ranges were 1.2E-4, 8.E-6, and 3.E-7 newton-seconds, respectively. The data obtained showed 14,169 counts, 218 counts, and 2 counts for the high-, medium-, and low-sensitivity systems, respectively, over a 1-year period (6 November 1964 to 5 November 1965). [6]

Pressurized Cells

The frequency at which two different thicknesses of stainless steel were punctured in space was obtained by use of 216 stainless steel cells with a thickness of 9.87E-3 cm. The cells were pressurized with helium (absolute pressure of 1300 mm mercury (Hg)) and mounted in seven rows around the periphery of the spacecraft. The test material was half-hard type 302 stainless steel coated with a 1.4-micron-thick thermal balance cover consisting of successive layers of chromium, silicon monoxide, aluminum, and silicon monoxide. Of the 210 active cells (six cells were inactive because of telemetry limitations), 70 had 2.54 ± 2.5-micron-thick test material, and 40 had 50.8 ± 2.5-micron-thick test material. The total exposed area of each class of detector was 0.69 cm2 and 1.38 cm2, respectively. When a cell was punctured the gas leaked out, and the drop in pressure caused a switch to open indicating that a puncture had occurred. The frequency at which cells lost pressure was a direct measure of the frequency at which the test material was being punctured by meteoroids. Although the cells could not detect any additional punctures, they did provide a permanent record of the initial puncture. The experiment operated satisfactorily during its 365-day life, recording 50 punctures of the 25-micron cells and 74 punctures of the 50-micron cells. The data obtained were in good agreement with puncture rates obtained in previous satellite experiments. [7]

Results

The spacecraft operated satisfactorily during its 1-year life (6 November 1964 to 7 November 1965), and all mission objectives were accomplished, except for the cadmium sulfide (CdS) cell detector experiment, which was damaged on liftoff and provided no data. [3]

See also

Related Research Articles

Vanguard 3

Vanguard 3 is a scientific satellite that was launched into Earth orbit by the Vanguard SLV-7 on 18 September 1959, the third successful Vanguard launch out of eleven attempts. Vanguard rocket: Vanguard Satellite Launch Vehicle-7 (SLV-7) was an unused Vanguard TV-4BU rocket, updated to the final production Satellite Launch Vehicle (SLV).

Explorer 2 was an American unmanned space mission within the Explorer program. Intended to be a repetition of the previous Explorer 1 mission, which placed a satellite into medium Earth orbit, the spacecraft was unable to reach orbit due to a failure in the launch vehicle during launch.

Explorer 35 NASA satellite of the Explorer program

Explorer 35,, was a spin-stabilized spacecraft built by NASA as part of the Explorer program. Designed for the study of the interplanetary plasma, magnetic field, energetic particles, and solar X-rays, from lunar orbit.

Explorer 6 NASA satellite of the Explorer program

Explorer 6, or S-2, was a NASA satellite, launched on 7 August 1959, at 14:24:20 GMT. It was a small, spheroidal satellite designed to study trapped radiation of various energies, galactic cosmic rays, geomagnetism, radio propagation in the upper atmosphere, and the flux of micrometeorites. It also tested a scanning device designed for photographing the Earth's cloud cover. On 14 August 1959, Explorer 6 took the first photos of Earth from a satellite.

Explorer 7 NASA satellite of the Explorer program

Explorer 7 was a NASA satellite launched on 13 October 1959, at 15:30:04 GMT, by a Juno II launch vehicle from Cape Canaveral Air Force Station (CCAFS) to an orbit of 573 × 1,073 km (356 × 667 mi) and inclination of 50.27°. It was designed to measure solar X-ray and Lyman-alpha flux, trapped energetic particles, and heavy primary cosmic rays. Secondary objectives included collecting data on micrometeoroid penetration, molecular sputtering and studying the Earth-atmosphere heat balance.

Solar Anomalous and Magnetospheric Particle Explorer NASA satellite of the Explorer program

The Solar Anomalous and Magnetospheric Particle Explorer was a NASA solar and magnetospheric observatory, and was the first spacecraft in the Small Explorer program. It was launched into low Earth orbit on 3 July 1992, from Vandenberg Air Force Base aboard a Scout G-1 launch vehicle. SAMPEX was an international collaboration between NASA and the Max Planck Institute for Extraterrestrial Physics of Germany. The Solar Anomalous and Magnetospheric Particle Explorer (SAMPEX) is the first of a series of spacecraft that was launched under the Small Explorer (SMEX) mission of program for low cost spacecraft.

Small Astronomy Satellite 2

The Small Astronomy Satellite 2, also known also as SAS-2, SAS B or Explorer 48, was a NASA gamma ray telescope. It was launched on 15 November 1972 into the low Earth orbit with a periapsis of 443 km and an apoapsis of 632 km. It completed its observations on 8 June 1973.

Explorer 14 NASA satellite of the Explorer program

Explorer 14, also called EPE-B or Energetic Particles Explorer-B, was a NASA spacecraft instrumented to measure cosmic-ray particles, trapped particles, solar wind protons, and magnetospheric and interplanetary magnetic fields. It was the second of the S-3 series of spacecraft, which also included Explorer 12, 14, 15, and 26. It was launched on 2 October 1962, aboard a Thor-Delta launch vehicle.

Explorer 12 NASA satellite of the Explorer program

Explorer 12, also called EPE-A or Energetic Particles Explorer-A and as S3), was a NASA satellite built to measure the solar wind, cosmic rays, and the Earth's magnetic field. It was the first of the S-3 series of spacecraft, which also included Explorer 12, 14, 15, and 26. It was launched on 16 August 1961, aboard a Thor-Delta launch vehicle. It ceased transmitting on 6 December 1961 due to power failure.

Explorer 28 NASA satellite of the Explorer program

Explorer 28, also called IMP-C, IMP-3 and Interplanetary Monitoring Platform-3, was a NASA satellite launched on 29 May 1965 to study space physics, and was the third spacecraft launched in the Interplanetary Monitoring Platform program. It was powered by chemical batteries and solar panels. There were 7 experiments on board, all devoted to particle studies. Performance was normal until late April 1967, when intermittent problems began. It stayed in contact until 12 May 1967, when contact was lost. The orbit decayed until it re-entered the atmosphere on 4 July 1968. The spacecraft design was similar to its predecessors Explorer 18 (IMP-A), launched in November 1963, and Explorer 21 (IMP-B), launched in October 1964, though this satellite was a few kilograms lighter. The successor Explorer 33 (IMP-D) began the use of a new design.

Explorer S-46 (satellite) NASA satellite of the Explorer program

Explorer S-46 was a NASA satellite with a mass of 41 kg (90 lb). It was the last of the original series of Explorer satellites built, designed, and operated by the Jet Propulsion Laboratory and Army Ballistic Missile Agency (ABMA).

Explorer S-55 (satellite) NASA satellite of the Explorer program

Explorer S-55 was an American satellite launched by NASA on 30 June 1961, as part of the Explorer program. Explorer S-55, was launched using a Scout X-1 launch vehicle from the Wallops Flight Facility (WFF). Its mission was to evaluate the launch vehicle, and investigate micrometeoroid impact and penetration. The mission failed because the third stage failed to ignite and the spacecraft did not achieve orbit.

Explorer 13 NASA satellite of the Explorer program

Explorer 13,, was a NASA satellite launched as part of the Explorer program on 25 August 1961, at 18:29:44 GMT, from Wallops Flight Facility (WFF), Virginia.

Explorer 16 NASA satellite of the Explorer program

Explorer 16, also called S-55B, was a NASA satellite launched as part of the Explorer program. Explorer 16 was launched on 19 December 1962, at 14:33:04 GMT, from Wallops Flight Facility, Virginia, with a Scout X-3.

Explorer 34 NASA satellite of the Explorer program

Explorer 34, was a NASA satellite launched as part of Explorer program. Explorer 34 as launched on 24 May 1967 from Vandenberg Air Force Base, California, with Thor-Delta E1 launch vehicle. Explorer 34 was the fifth satellite launched as part of the Interplanetary Monitoring Platform program, but was known as "IMP-4" because the preceding launch was more specifically part of the "Anchored IMP" sub-program. The spacecraft was put into space between the launches of Explorer 33 in 1966 and Explorer 35 in July 1967, but the next satellite to use Explorer 34's general design was Explorer 41, which flew in 1969.

Explorer 41 NASA satellite of the Explorer program

Explorer 41, also called as IMP-G and IMP-5, was a NASA satellite launched as part of Explorer program. Explorer 41 as launched on 21 June 1969 on Vandenberg AFB, California, with a Thor-Delta E1 launch vehicle. Explorer 41 was the seventh satellite launched as part of the overall Interplanetary Monitoring Platform series, though it received the post-launch designation "IMP-5" because two previous flights had used the "AIMP" designation instead. It was preceded by the second of those flights, Explorer 35, launched in July 1967. Its predecessor in the strict IMP series of launches was Explorer 34, launched in May 1967, which shared a similar design to Explorer 41. The next launch was of an IMP satellite was Explorer 43 in 1971.

Explorer 43 NASA satellite of the Explorer program

Explorer 43, also called as IMP-I and IMP-6, was a NASA satellite launched as part of Explorer program. Explorer 43 was launched on 13 March 1971 from Cape Canaveral Air Force Station (CCAFS), with a Thor-Delta M6 launch vehicle. Explorer 43 was the sixth satellite of the Interplanetary Monitoring Platform.

Explorer 45 NASA satellite of the Explorer program

Explorer 45 was a NASA satellite launched as part of Explorer program. Explorer 45 was the only one to be released from the program Small Scientific Satellite.

Explorer 46 NASA satellite of the Explorer program

Explorer 46,, was a NASA satellite launched as part of Explorer program.

Explorer 48 NASA satellite of the Explorer program

Explorer 48 was a satellite launched specifically for the purpose of X-ray astronomy of the NASA. It was also known as the SAS-B, SAS-2.

References

  1. "Launch Log". Jonathan's Space Report. 21 July 2021. Retrieved 7 November 2021.
  2. "Trajectory: Explorer 23 (S 55C) 1964-074A". NASA. 28 October 2021. Retrieved 7 November 2021.PD-icon.svgThis article incorporates text from this source, which is in the public domain .
  3. 1 2 3 "Display: Explorer 23 (S 55C) 1964-074A". NASA. 28 October 2021. Retrieved 7 November 2021.PD-icon.svgThis article incorporates text from this source, which is in the public domain .
  4. "Experiment: Cadmium Sulfide Cells". NASA. 28 October 2021. Retrieved 7 November 2021.PD-icon.svgThis article incorporates text from this source, which is in the public domain .
  5. "Experiment: Capacitor Detectors". NASA. 28 October 2021. Retrieved 7 November 2021.PD-icon.svgThis article incorporates text from this source, which is in the public domain .
  6. "Experiment: Impact Detectors". NASA. 28 October 2021. Retrieved 7 November 2021.PD-icon.svgThis article incorporates text from this source, which is in the public domain .
  7. "Experiment: Pressurized Cells". NASA. 28 October 2021. Retrieved 7 November 2021.PD-icon.svgThis article incorporates text from this source, which is in the public domain .