75 mm field gun M1897 on M2 carriage

Last updated
75 mm field gun M1897 on M2 carriage
US 75 mm M2A2 Artillery Piece - Flickr - euthman.jpg
An M1897 gun on an M2A2 carriage at the National Museum of the Pacific War.
Type Field gun
Anti-tank gun
Place of originBarrels: Flag of France.svg  France
Carriages: Flag of the United States (23px).png  United States
Service history
Used by United States
United Kingdom
Wars World War II
Production history
Designer Joseph-Albert Deport, Etienne Sainte-Claire Deville, Thorsten Nordenfelt, and Emile Rimailho.
ManufacturerBarrels: French arsenals
Carriages: Rock Island Arsenal, Parish Pressed Steel
ProducedBarrels: 1897–1940
Carriages: 1936–1941
No. built1,250
VariantsTowed: M2, M2A1, M2A2 and M2A3
Self-propelled: M3 gun motor carriage
Specifications
Mass3,400 lb (1,500 kg)
Length18 ft 4 in (5.59 m)
Barrel  length8 ft 10 in (2.69 m) L/36
Height4 ft 8 in (1.42 m)
Shell Fixed QF 75×350 mm R
Caliber 75 mm (2.95 in)
Breech Nordenfelt eccentric screw
Recoil Hydro-pneumatic
Carriage Split-trail
Elevation −10° to +45.5°
Traverse 30° R / 30° L
Rate of fire 6 rpm
Muzzle velocity 2,000 ft/s (610 m/s)
Maximum firing range7.9 mi (12.7 km) [1]

The 75 mm field gun M1897 on M2 carriage was a field gun and anti-tank gun which was used by the US Army during the interwar period and World War II.

Contents

History

When the United States entered World War I on the side of the Allied Powers in 1917, it lacked sufficient arms to supply its rapidly expanding armed forces. Although the United States had been providing arms and supplies to the Allies, few of these weapons were being used to arm US forces. The few weapons that the US Army did have were often of a different caliber than British or French weapons, thus using incompatible ammunition. When the United States entered the war, the Allies had an adequate supply of arms but they were running short of manpower; since the United States had more manpower than weapons, the Allies decided it made logistical sense to use British- and French-supplied weapons to arm American forces to bring them rapidly into action rather than wait for the country's industry to catch up with its armed forces. [2]

Design

Originally of French design, the Canon de 75 modèle 1897 was supplied to the United States in large numbers and became the standard field gun for the US Army during World War I. The mle 1897 was a revolutionary breech-loading artillery piece that combined a Nordenfelt eccentric screw breech, fixed "quickfire" ammunition, and a hydro-pneumatic recoil mechanism. The combination of fixed ammunition, recoil mechanism, and simple breech made the mle 1897 one of the fastest-firing and most accurate field guns of its era. [2] It had a box trail carriage with a gun shield, and two wooden-spoked steel-rimmed wheels on an unsprung axle, designed for horse traction.

World War I

In US service the mle 1897 was given the designation 75 mm gun M1897. [3] There were 480 American 75 mm field gun batteries (over 1,900 guns) on the battlefields of France in November 1918. [4] American industry began building the mle 1897 in the spring of 1918, but only 143 American-built guns had been shipped to France by 11 November 1918, and most American batteries used French-built 75s. [4]

Between World Wars

Although World War I had shown that direct fire, light field guns like the mle 1897 lacked adequate firepower to destroy an entrenched enemy, the majority of combatants had large numbers of them and had little impetus to replace them. With a limited peacetime budget, the US Army, like other armies, opted to modernize its existing medium artillery. From 1920 to 1925, the Ordnance Department modified the M1897 gun by placing it on a new carriage designed to address the shortcomings of the box trail carriage that included limited traverse, limited elevation, and limited range. The new weapon was standardized in 1926 as the "75 mm gun M1 on carriage M2A1." Only one battery's worth of these weapons were completed before the project stopped because of lack of funding. [5]

The new M2A1 carriage had a sprung axle with steel disc wheels and pneumatic tires, a new gun shield, and an integrated jack. In 1932, it was accepted for small-scale production. [6] The barrels came from 2,000 unconverted M1897s that were in storage. The conversion to the M2A1 carriages added 743 lb (337 kg). [1] [7] The increased elevation allowed the modernized guns to be used for both direct and indirect fire roles because of greater range (7.9 mi (12.7 km) vs 5.3 miles (8.5 km)) and greater muzzle velocity (2,000 ft/s (610 m/s) vs 1,740 ft/s (529 m/s)).

Modernization of field artillery

In 1932, a modified gun known as the M2 was standardized for limited production. It took advantage of new projectiles and developments in high explosives. In the early 1930s, the U.S. Army Chief of Staff, General Douglas MacArthur, ordered the motorization of half of the Army's light field artillery. [6] To achieve this, existing box trail 75 mm gun carriages were given sprung axles, steel wheels, and pneumatic tires to allow them to be towed behind vehicles at higher speeds. [8] On January 18, 1934, the conversion kit for existing guns was standardized, and modernized guns were given the designations "75 mm field gun M1897A1," "75 mm field gun M1897A2," "75 mm field gun M1897A3," and "75 mm field gun M1897A4." The M1897A2 had an autofretted barrel, no barrel jacket, and 156° vs 120° breech mechanism. The M1897A3 and M1897A4 were similar to the M1897A2, except the M1897A4 had the muzzle guides removed and replaced by steel rails with bronze strips. The modifications added 350 lb (160 kg) of weight, but performance remained the same. [9]

In 1934, the first conversion kits were issued to fourteen National Guard field artillery regiments. By October 1941, 871 conversions had been authorized but only 605 guns had been completed. Modernization of 75 mm guns also involved placing M1897 guns on new M2A1 carriages. [6] Production of the M2A2 carriage began in 1936, but the conversion process was slow, and by the end of 1939 only 200 were converted. In 1940, a simplified carriage known as the M2A3 was introduced, see below.

As of 1939, the cost of modernization was about $8,000 per piece – less than a third of a new 105-mm howitzer. [10]

By 1940, the War Department had modernized 56 of its 81 75 mm gun battalions in the Regular Army and National Guard with these two conversions. These guns were used extensively for training and pre-war exercises. However, none are believed to have been used in combat by US forces during World War II. [8]

World War II

After the defeat of France in the spring of 1940, the U.S. Army became worried about its lack of modern antitank guns. In July 1940, a simplified and improved carriage with the jack eliminated [11] known as the M2A3 was introduced, and it was decided to mount M1897 guns on both M2A2 and M2A3 carriages and equip them with direct-fire sights so they could be used as anti-tank guns. 918 M2A3 carriages had been manufactured by November 1941, and a report that month stated that 554 M2A2 and 188 M2A3 carriages were in service; because of the shortage of modern artillery pieces, these guns were issued to both field artillery and anti-tank units. [1] [12] [13]

In 1941, field artillery units began converting to the new 105 mm M2 Howitzer, and some M1897s were removed from their towed carriages and installed on the half-track M3 gun motor carriage (GMC). The towed version and the M3 GMC was used by American tank destroyer battalions during operations in the North African and Italian campaigns. M3 GMCs were also used in the Pacific theater during the Philippines campaign and by Marine Regimental Weapons Companies until 1944. [14] Their performance in an anti-tank role was adequate against Japanese and Italian armor but inadequate against late war German armor. M3 GMCs remained in use with the British in Italy and North West Europe in small numbers until the end of the war. [14] Towed guns were also used for training and on March 8, 1945, they were declared obsolete and retired. [1]

Ammunition

The M1897 guns used the same 75×350 mm R ammunition as the 75 mm gun M2/M3/M6 tank guns of the M3 Lee, M4 Sherman, M24 Chaffee, and 'gunship' version of the North American B-25 Mitchell bomber. The M2 was a L/31 gun, the M1897 was L/36, and the M3 was L/40. The muzzle velocity of the M2 was 1,930 ft/s (588 m/s), the M1897 was 2,000 ft/s (610 m/s), and the M3 was 2,030 ft/s (619 m/s). Armor penetration statistics are approximate and based on M3 data.

Ammunition typeWeight (round/projectile)Armor penetration of rolled homogeneous armor at 30°
500 yd1000 yd1500 yd2000 yd
M61 Armor-piercing capped19.9 lb (9.0 kg) / 13.93 lb (6.32 kg)2.7 in (69 mm)2.4 in (61 mm)2.2 in (56 mm)1.9 in (48 mm)
M66 High-explosive anti-tank 16.3 lb (7.39 kg) / 13.1 lb (5.94 kg)3.62 in (92 mm)3.62 in (92 mm)3.62 in (92 mm)3.62 in (92 mm)
M72 Armor-piercing 18.8 lb (8.5 kg) / 14.92 lb (6.77 kg)2.3 in (58 mm)1.8 in (46 mm)1.3 in (33 mm)1.0 in (25 mm) [15]
M41 High-explosive 17.4 lb (7.89 kg) / 13.8 lb (6.24 kg)
M48 High-explosive18.2 lb (8.27 kg) / 14.6 lb (6.62 kg)
M64 Incendiary 18.9 lb (8.56 kg) / 15.2 lb (6.91 kg)
M89 Smoke19.0 lb (8.64 kg) / 15.4 lb (6.99 kg)
MK1 Shrapnel 6.5 lb (2.9 kg) lead balls

See also

Related Research Articles

This page details tank production by the United States of America during World War II.

<span class="mw-page-title-main">M3 Lee</span> American medium tank of World War II

The M3 Lee, officially Medium Tank, M3, was an American medium tank used during World War II. The turret was produced in two forms, one for US needs and one modified to British requirements to place the radio next to the commander. In British Commonwealth service, the tank was called by two names: tanks employing US-pattern turrets were called "Lee", named after Confederate general Robert E. Lee, while those with British-pattern turrets were known as "Grant", named after Union general Ulysses S. Grant.

<span class="mw-page-title-main">Canon de 75 modèle 1897</span> Regimental artillery field gun

The French 75 mm field gun is a quick-firing field artillery piece adopted in March 1898. Its official French designation was: Matériel de 75 mm Mle 1897. It was commonly known as the French 75, simply the 75 and Soixante-Quinze. The French 75 was designed as an anti-personnel weapon system for delivering large volumes of time-fused shrapnel shells on enemy troops advancing in the open. After 1915 and the onset of trench warfare, impact-detonated high-explosive shells prevailed. By 1918 the 75s became the main agents of delivery for toxic gas shells. The 75s also became widely used as truck mounted anti-aircraft artillery. They were the main armament of the Saint-Chamond tank in 1918 and the char 2c.

<span class="mw-page-title-main">M3 half-track</span> US military vehicle

The M3 half-track was an American armored personnel carrier half-track widely used by the Allies during World War II and in the Cold War. Derived from the M2 half-track car, the M3 was extensively produced, with about 15,000 standard M3s and more than 38,000 variant units manufactured.

<span class="mw-page-title-main">75 mm gun M2–M6</span> Standard American tank guns of the Second World War

The 75 mm gun, models M2 to M6, was the standard American medium caliber gun fitted to mobile platforms during World War II. They were primarily mounted on tanks, such as the M3 Lee and M4 Sherman, but one variant was also used as an air-to-ground gun on the B-25 Mitchell medium bomber aircraft. There were five main variants used during the war: M2, M3, M4, M5 and M6.

<span class="mw-page-title-main">M2 light tank</span> 1930s United States light tank

The M2 light tank, officially Light Tank, M2, was an American light tank of the interwar period which saw limited service during World War II. The most common model, the M2A4, was equipped with one 37 mm (1.5 in) M5 gun and five .30 cal M1919 Browning machine guns.

<span class="mw-page-title-main">M2 half-track car</span> Half-track artillery tractor/reconnaissance vehicle

The M2 half-track car was an armored half-track produced by the United States during World War II. Its design drew upon half-tracks imported from France in the 1930s, employing standard components supplied by U.S. truck manufacturers to speed production and reduce costs. The concept was designed, and the pilot models manufactured by the Firestone Tire and Rubber Company Production by the White Motor Company began in 1940 and was expanded to include Autocar.

<span class="mw-page-title-main">M101 howitzer</span> US-made towed howitzer

The M101A1 howitzer is an artillery piece developed and used by the United States. It was the standard U.S. light field howitzer in World War II and saw action in both the European and Pacific theaters and during the Korean War. Entering production in 1941, it quickly gained a reputation for accuracy and a powerful punch. The M101A1 fires 105 mm high explosive (HE) semi-fixed ammunition and has a range of 12,330 yards (11,270 m), making it suitable for supporting infantry.

<span class="mw-page-title-main">37 mm gun M3</span> American anti-tank gun

The 37 mm gun M3 is the first dedicated anti-tank gun fielded by United States forces in numbers. Introduced in 1940, it became the standard anti-tank gun of the U.S. infantry with its size enabling it to be pulled by a jeep. However, the continuing improvement of German tanks quickly rendered the 37 mm ineffective and, by 1943, it was being gradually replaced in the European and Mediterranean theaters by the more powerful British-developed 57 mm gun M1. In the Pacific, where the Japanese tank threat was less significant, the M3 remained in service until the end of the war, but some 57mm guns were issued.

<span class="mw-page-title-main">M2 medium tank</span> Medium tank

The M2 medium tank, officially Medium Tank, M2, was a United States Army medium tank that was first produced in 1939 by the Rock Island Arsenal, just prior to the commencement of the Second World War in Europe. Production was 18 M2 tanks, and 94 slightly improved M2A1 tanks, for a total of 112. Events in Western Europe rapidly demonstrated that the M2 was obsolete, and it was never used overseas in combat; it was, however, used for training purposes throughout the war.

<span class="mw-page-title-main">M3 howitzer</span> Light Howitzer

The 105 mm Howitzer M3 was a U.S. light howitzer designed for use by airborne troops. The gun utilized the barrel of the 105 mm Howitzer M2, shortened and fitted to a slightly modified split trail carriage of the 75 mm pack howitzer.

<span class="mw-page-title-main">7.5 cm Pak 97/38</span> Anti-tank gun

The Pak 97/38 was a German anti-tank gun used by the Wehrmacht in World War II. The gun was a combination of the barrel from the French Canon de 75 modèle 1897 fitted with a Swiss Solothurn muzzle brake and mounted on the carriage of the German 5 cm Pak 38 and could fire captured French and Polish ammunition.

<span class="mw-page-title-main">3-inch gun M5</span> WW2 US anti-tank gun

The 3-inch gun M5 was an anti-tank gun developed in the United States during World War II. The gun combined a 3-inch (76.2 mm) barrel of the anti-aircraft gun T9 and elements of the 105 mm howitzer M2. The M5 was issued exclusively to the US Army tank destroyer battalions starting in 1943. It saw combat in the Italian Campaign and on the Western Front in Northwest Europe.

<span class="mw-page-title-main">M3 gun motor carriage</span> American tank destroyer

The M3 gun motor carriage was a United States Army tank destroyer equipped with a 75 mm M1897A4 gun, which was built by the Autocar Company during World War II.

<span class="mw-page-title-main">240 mm howitzer M1</span> 1940s United States 240 mm field howitzer

The 240 mm howitzer M1, popularly nicknamed the "Black Dragon", was a towed howitzer used by the United States Army. The 240 mm M1 was designed to replace the World War I era 240 mm howitzer M1918, which was based on a 1911 French design and was outdated by World War II.

<span class="mw-page-title-main">Canon de 155 C modèle 1917 Schneider</span> Heavy field howitzer

The Canon de 155 C modèle 1917 Schneider, often abbreviated as the C17S, was a French howitzer designed by Schneider. It was essentially the Canon de 155 C modèle 1915 Schneider fitted with a different breech to use bagged propellant rather than the cartridge cases used by the older howitzer. It was used by France, Russian Empire, Belgium, Romania, and the United States from 1917 during World War I and was widely exported after the war. Surviving weapons were in service with France, Poland, Greece, Italy, Belgium, the United States, and Finland during World War II. Captured weapons were used by the Germans for their 2nd-line artillery and coast defense units.

<span class="mw-page-title-main">M116 howitzer</span> American pack howitzer

The 75mm pack howitzer M1 was a pack howitzer artillery piece used by the United States. Designed to be moved across difficult terrain, gun and carriage could be broken down into several pieces to be carried by pack animals.

<span class="mw-page-title-main">T19 howitzer motor carriage</span> Self-propelled gun

The T19 howitzer motor carriage (HMC) was a 105 mm (4.1 in) howitzer mounted on a M3 Half-track chassis. It saw service during World War II with the U.S. Army. Its secondary armament consisted of an air-cooled .50 in (13 mm) M2 machine gun for local defense. It was produced by Diamond T between January 1942 and April 1942.

<span class="mw-page-title-main">Canon de 75 antiaérien mle 1913–1917</span> Anti-aircraft gun

The Canon de 75 antiaérien mle 1913–1917 were a family of French 75 mm anti-aircraft guns designed and manufactured by Schneider et Cie at Le Creusot. The guns were used by the French Army during the First World War and Second World War.

References

  1. 1 2 3 4 Williford, G. (2016). American Breechloading Mobile Artillery 1875-1953 : An illustrated identification guide. Thomas D. Batha. Atglen, PA. pp. 158–159. ISBN   978-0-7643-5049-8. OCLC   927401960.{{cite book}}: CS1 maint: location missing publisher (link)
  2. 1 2 Williford, G. (2016). American breechloading mobile artillery 1875-1953 : an illustrated identification guide. Thomas D. Batha. Atglen, PA. pp. 86–87. ISBN   978-0-7643-5049-8. OCLC   927401960.{{cite book}}: CS1 maint: location missing publisher (link)
  3. ↑ 75-MM GUN M1897, U.S. Army Veterinary Corps Historical Preservation Group - U.S. ARMY]
  4. 1 2 Crowell, Benedict (1919). America's Munitions 1917-1918. Harvard University. United States War Dept.
  5. ↑ Zaloga, Steven J. (2007). U.S. Field Artillery of World War II. Oxford, United Kingdom: Osprey. p. 8. ISBN   9781846030611.
  6. 1 2 3 Zaloga, Steven J. (2007). U.S. Field Artillery of World War II. Oxford, United Kingdom: Osprey. p. 9. ISBN   9781846030611.
  7. ↑ Hogg, Ian V. (2014). The American Arsenal: the World War II Official Standard Ordnance Catalogue. Barnsley, South Yorkshire. pp. 149–150. ISBN   978-1-4738-9701-4. OCLC   958355682.{{cite book}}: CS1 maint: location missing publisher (link)
  8. 1 2 Williford, G. (2016). American Breechloading Mobile Artillery 1875-1953: an illustrated identification guide. Thomas D. Batha. Atglen, PA. pp. 136–137. ISBN   978-0-7643-5049-8. OCLC   927401960.{{cite book}}: CS1 maint: location missing publisher (link)
  9. ↑ Hogg, Ian V. (1998). Allied Artillery of World War Two. Ramsbury, Marlborough, Wiltshire: Crowood Press. p. 43. ISBN   1-86126-165-9. OCLC   40810967.
  10. ↑ "Third Deficiency Appropriation Bill for 1939: Hearings Before the Subcommittee of the Committee on Appropriations, House of Representatives, Seventy-sixth Congress, First Session on the Third Deficiency Appropriation Bill for 1939". 1939.
  11. ↑ https://tradocfcoeccafcoepfwprod.blob.core.usgovcloudapi.net/fires-bulletin-archive/1940/NOV_DEC_1940/NOV_DEC_1940_FULL_EDITION.pdf [ bare URL PDF ]
  12. ↑ Zaloga, Steven J. (2005). U.S. Anti-tank Artillery 1941-1945. Oxford, United Kingdom: Osprey. p. 7. ISBN   1841766909.
  13. ↑ Zaloga, Steven J. (2007). U.S. Field Artillery of World War II. Oxford, United Kingdom: Osprey. pp. 8–9. ISBN   9781846030611.
  14. 1 2 Zaloga, Steven J. (1994). M3 half-track 1940-73. Peter Sarson. London: Osprey. pp. 33–35. ISBN   1-85532-467-9. OCLC   32013047.
  15. ↑ HUNNICUTT, R. P. (2015). SHERMAN : a history of the american medium tank. ECHO POINT Books & MEDIA. p. 352. ISBN   978-1-62654-861-9. OCLC   1012798923.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.