Aereon 26 | |
---|---|
Role | lifting body aircraft |
National origin | United States of America |
Manufacturer | Aereon Corporation |
First flight | March 1971 |
Number built | 1 |
The Aereon 26 (stylized as AEREON 26) was an experimental aircraft developed to investigate lifting body design with a view to using its shape to create hybrid designs, part airship, part conventional aircraft. It was powered by a piston engine, driving a pusher propeller, and generated lift through the aerodynamics of its lozenge-shaped fuselage.
Although results of flight tests conducted in 1971 were promising, funding for larger and semi-buoyant aircraft was not forthcoming at the time. The story of the test program was recounted by John McPhee in his book The Deltoid Pumpkin Seed ( ISBN 0-374-51635-9). This aircraft has a special place in UFO and conspiracy lore, since enthusiasts have drawn parallels between the shape of this aircraft and some reported UFOs from around the same era.
The AEREON Corporation, established in 1959, at first concentrated on the construction of a prototype three-hull hybrid airship, the AEREON III . Completed in 1965, the prototype was lost during taxiing tests the following year, without having flown. [1]
Following the destruction of the AEREON III, the firm sought "a new and better solution." AEREON's Monroe Drew and John Fitzpatrick employed German physicist Jürgen Bock, formerly of the Max Planck Institute for Nuclear Physics, Heidelberg, Germany, and the U.S. Army's Aberdeen Proving Ground, to develop a list of parameters that would be fed into a computer at the General Electric Space Center, Valley Forge, Pennsylvania, in order to determine "the optimum configuration for enclosing maximum volume without too much penalty of drag." [2] AEREON 26's deltoid configuration, "a shrewd and practical compromise between an airfoil and a sphere," [3] was the result of these efforts.
Rubber-powered and gasoline-engined models of the configuration were flown and wind tunnel tests conducted before testing of the 26 itself began. [4]
According to a paper delivered to the Interagency Workshop on Lighter than Air Vehicles in 1974 by AEREON president William Miller, the 26's shape—dubbed an "aerobody"—was "a lifting-body [sic] of deltoid planform, elliptical cross-sections, and a fineness ratio of 4:5." [5] Among the advantages claimed for this hull form were proximity of the aerodynamic center, center of buoyancy, and center of gravity and a minimal need for trim-control devices, thus facilitating the transportation of "a full range of tonnages at various speeds without major trim requirements." [6]
In McPhee's words, the craft was "a triangle with a deep belly and a vaulting back" [7] or a "delta" when seen from above and a "fat and tremendous pumpkin seed" from the side (hence "deltoid pumpkin seed"). [8]
The 26's structure was composed of aluminum tubes (salvaged from the wrecked AEREON III), joined using heli-arc welding and covered with aircraft cloth and aluminum sheet. [9] [10]
The 26 was powered by a single engine, mounted above the trailing edge and driving a pusher propeller. [11] Although the 26 inherited the engine of the AEREON III—apparently a four-cylinder McCulloch of 92 horsepower (69 kW) [12] —it appears to have had three different propellers over the course of the test program. After the aircraft experienced difficulty in getting out of ground effect, [13] "a propeller of a different pitch" was fitted. This second propeller was a "virtually unique" example, made of lemonwood, that had been used by Igor Bensen in an unsuccessful attempt on the autogyro speed record. [14] After further testing indicated the 26 to be underpowered, a third propeller was carved to order from yellow birch by Sensenich Propeller and fitted in time for the 26's second series of flight tests in 1971. [15]
The engine's lifespan also had a significant influence on the program; it was "just a drone-aircraft engine, and an old one at that" and had already been used for 12 hours of its 25-hour design life. [16]
The 26 was assembled (like its predecessor) by veteran U.S. Navy airship rigger Everett Linkenhoker. Initial construction was in two portions, in "a small shop near Lakehurst, New Jersey." The portions were then transported by road to Red Lion Airport, where they were joined together. The aircraft was initially housed in a timber-and-sheetrock box within a hangar at the airport, for reasons of secrecy. Initial taxiing tests were conducted at Red Lion, again under conditions of secrecy. Subsequently, the aircraft was transported by road to the National Aviation Facilities Experimental Center (NAFEC) near Atlantic City for flight testing. [17]
The 26 made its first flight, piloted by John Olcott (later president of the National Business Aviation Association), at NAFEC on September 7, 1970. [18] However, as discussed above, it was initially unable to climb out of ground effect. By September 28, following the replacement of the propeller and the removal of some items, the 26 was capable of reaching an altitude of 50 feet (15 m) but appeared underpowered. [19] The aircraft was returned to Red Lion before being hauled back to NAFEC on February 24, 1971, following the fitting of vortex generators and the third propeller. [20]
Tests resumed at NAFEC on March 1, 1971. [21] On this occasion, the 26 "went up and out of ground effect with no strain at all". [22] In subsequent tests, it performed circuits of the field [23] and a variety of other maneuvers [24] before the engine's life expiry ended the test program.
Addressing the Interagency Workshop on Lighter than Air Vehicles in 1974, William Miller said the test program indicated that performance was as had been predicted, the 26's stability and control and handling qualities were "good," the aircraft was "docile and acceptable...within the limited scope of the tests," and the concept had been shown to be feasible, with the program potentially forming a basis for "realistic studies of much larger such aircraft." [25]
The aircraft was intended as a forerunner of much larger craft that—unlike the 26 itself—would contain helium; these designs were dubbed "Dynairships." One proposal, the AEREON 340, was to have been 340 feet (100 m) long, with a wingspan of 256 feet (78 m) and total lift of 400,000 pounds (180,000 kg). Powered by four 5,500 horsepower (4,100 kW) Rolls-Royce Tyne turboprop engines, it was claimed to be capable of carrying intermodal containers or semi-trailers, operating slightly heavier than air. [26] A patent for "[a] cargo-carrying air ship [sic] compris[ing] a gas-filled, low aspect ratio deltoid wing" was granted in 1969; according to this patent, "extremely large ships, having lengths in excess of 1,000 feet (300 m)" and capable of economically transporting "large payloads, ranging up to 1,000 long tons (1,000 t) or more" over long distances, were feasible. [27]
In 1974, Miller described three "hypothetical Dynairships":
Versions of the configuration that would, like the 26, have lacked lifting gas and operated heavier-than-air at all times were also proposed. These included "a kind of flying camper for general aviation" and "a bigger model for the regional airline industry." [29] A variant with a V/STOL capability, using blown flaps, was patented in 1979. [30] Another heavier-than-air variant, later known as the Aereon WASP, is described in a 1990 patent. This "airborne surveillance antenna platform" with "long endurance and high altitude flight capability" was to carry a radar antenna comprising "planar or linear phased arrays arranged to scan in a continuous pattern in all azimuthal directions" within its deltoid hull. [31]
William Miller was looking to donate the Aereon 26 to a museum since at least 2011. [32] As of 2019 it has been added to the Air Victory Museum permanent collection and is on public display in Lumberton, New Jersey. [33]
Data from Jane's All the World's Aircraft 1976–77 [34]
General characteristics
Performance
An aircraft is a vehicle that is able to fly by gaining support from the air. It counters the force of gravity by using either static lift or the dynamic lift of an airfoil, or, in a few cases, direct downward thrust from its engines. Common examples of aircraft include airplanes, helicopters, airships, gliders, paramotors, and hot air balloons.
An airship, dirigible balloon or dirigible is a type of aerostat or lighter-than-air aircraft that can navigate through the air flying under its own power. Aerostats use buoyancy from a lifting gas that is less dense than the surrounding air to achieve the lift needed to stay airborne.
In aeronautical and naval engineering, pusher configuration is the term used to describe a drivetrain of air- or watercraft with propulsion device(s) after the engine(s). This is in contrast to the more conventional tractor configuration, which places them in front.
The AEREON III was an experimental hybrid airship of rigid construction built by the AEREON Corporation in the early 1960s. Of unconventional design, the airship featured three gas envelopes attached side-by-side, with the connecting structures shaped as airfoils to create extra lift as the craft moved forward. Intended as a small prototype craft that would precede the development of much larger hybrid airships, the AEREON III was constructed between 1959 and 1965 but was destroyed during taxiing tests in 1966 and scrapped without having flown. It was "the first rigid airship to be built since Graf Zeppelin II".
The Wright Flyer made the first sustained flight by a manned heavier-than-air powered and controlled aircraft—an airplane—on December 17, 1903. Invented and flown by brothers Orville and Wilbur Wright, it marked the beginning of the pioneer era of aviation.
His Majesty's Airship R100 was a privately designed and built British rigid airship made as part of a two-ship competition to develop a commercial airship service for use on British Empire routes as part of the Imperial Airship Scheme. The other airship, the R101, was built by the British Air Ministry, but both airships were funded by the Government.
The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. Introduced in 1949 by Piper Aircraft, it was developed from the PA-11 Cub Special, and traces its lineage back through the J-3 Cub to the Taylor E-2 Cub of the 1930s. In close to 40 years of production, over 10,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
The Convair XFY-1 Pogo was an experimental V/STOL aircraft developed during the early years of the Cold War. It was intended to be a high-performance fighter aircraft capable of operating from small warships. Lockheed and Convair were awarded contracts to build experimental VTOL fighters, with Convair producing the XFY-1, also known as the "Pogo." It was developed as an attempt to create a practical V/STOL aircraft.
The Boeing Pelican ULTRA was a proposed ground effect fixed-wing aircraft under study by Boeing Phantom Works in the early 2000s.
A hybrid airship is a powered aircraft that obtains some of its lift as a lighter-than-air (LTA) airship and some from aerodynamic lift as a heavier-than-air aerodyne.
A rigid airship is a type of airship in which the envelope is supported by an internal framework rather than by being kept in shape by the pressure of the lifting gas within the envelope, as in blimps and semi-rigid airships. Rigid airships are often commonly called Zeppelins, though this technically refers only to airships built by the Luftschiffbau Zeppelin company.
The Ling-Temco-Vought (LTV) XC-142 is a tiltwing experimental aircraft designed to investigate the operational suitability of vertical/short takeoff and landing (V/STOL) transports. An XC-142A first flew conventionally on 29 September 1964, and completed its first transitional flight on 11 January 1965 by taking off vertically, changing to forward flight, and finally landing vertically. Its service sponsors pulled out of the program one by one, and it eventually ended due to a lack of interest after demonstrating its capabilities successfully.
In aeronautics, an aircraft propeller, also called an airscrew, converts rotary motion from an engine or other power source into a swirling slipstream which pushes the propeller forwards or backwards. It comprises a rotating power-driven hub, to which are attached several radial airfoil-section blades such that the whole assembly rotates about a longitudinal axis. The blade pitch may be fixed, manually variable to a few set positions, or of the automatically variable "constant-speed" type.
Solomon Andrews was a doctor, aviator and dirigible airship inventor. Andrews invented an airship called Aereon which received some notice in the 1860s. He claimed to sail it as one would a sailboat. Mention is made of the movement of pilot and passenger fore and aft in the basket to control attitude. He was a medical doctor and three times Mayor of Perth Amboy, New Jersey. He served as the health officer of Perth Amboy, New Jersey and supervised the construction of the city's first sewer system. He served as the Collector of the Port of New Jersey in Perth Amboy from 1844 to 1845.
The channel wing is an aircraft wing principle developed by Willard Ray Custer in the 1920s. The most important part of the wing consists of a half-tube with an engine placed in the middle, driving a propeller placed at the rear end of the channel formed by the half-tube.
The Hybrid Air Vehicles Airlander 10 is a hybrid airship designed and built by British manufacturer Hybrid Air Vehicles (HAV). Comprising a helium airship with auxiliary wing and tail surfaces, it flies using both aerostatic and aerodynamic lift and is powered by four diesel engine-driven ducted propellers.
The AeroLift CycloCrane was a unique US hybrid airship which adopted helicopter derived airfoil control for low speed flight manoeuvring by spinning on its axis. It was intended to be a heavy load lifter, initially aimed at the Canadian logging industry. A proof of concept vehicle flew at times during the 1980s, but no large production aircraft were built.
The Berliner Helicopter was a series of experimental helicopters built by Henry Berliner between 1922 and 1925. The helicopters had only limited controllability but were the most significant step forward in helicopter design in the US, until the production of the Vought-Sikorsky VS-300 helicopter in 1940. The 1922 flights of the Berliner and the de Bothezat H1 were the first by manned helicopters.
The Aereon Dynairship is a conceptual large hybrid airship developed by the Aereon Corporation for civilian and military cargo transport.
The ZRCV was a large dirigible aircraft carrier proposed by the Lighter-than-Air Bureau of the United States Department of the Navy and the Goodyear-Zeppelin Corporation. It would have been a 9.55-million-cubic-foot (270,000 m3) airship designed to carry nine Douglas-Northrop BT–1 dive bombers.