Type | Private company |
---|---|
Industry | Aerospace |
Founded | 1989 |
Headquarters | , |
Key people | CEO: Robert Baslee |
Products | Kit aircraft |
Number of employees | Two (2016) |
Website | www |
Airdrome Aeroplanes is an American aircraft manufacturer, founded by Robert Baslee, that offers a large selection of kit aircraft for amateur construction. The company is based in Holden, Missouri. [1] [2] [3] [4] [5] [6] [7]
The company produces a range of kits specializing in replica aircraft from the pre-World War I pioneer period and from both the Central Powers and Allies of World War I. [3] [4] [7] [8]
Baslee started in aviation as a teenager, building model aircraft. He paid for his hobby by mowing lawns and shoveling snow in Lee's Summit, Missouri. A week before he turned 16, he sold all his models and started work on his private pilot certificate, completing it at age 17, with money earned working in the fast food industry. He became an apprentice machinist, graduated from high school in 1983 and later completed a degree in mechanical engineering. [9]
Baslee constructed a series of homebuilt aircraft, selling each one to pay for the next one. He had aspired to build a Fokker Triplane, but found the existing replica plans very complex and slow to construct. He applied his engineering knowledge and created a new design of the DR.1, with a simplified structure and revised airfoil, a modified Clark Y, to improve handling. The resulting design uses aluminum tubing and pop riveted gussets, in place of wooden structure. All designs use a two-spar wing design to give redundancy not found in the original First World War designs. Most World War I designs were very tail-heavy and so the balance was adjusted in his designs to give a better center of gravity. [9]
The prototype Triplane was shown at EAA AirVenture in 1989, resulting in requests for kits from prospective customers. This in turn resulted in the founding of the company to develop and produce the kits. [9]
Each design is completed over about 1000 hours of work and then a prototype is finished. The prototype construction allows the completion of photographs and video of the construction techniques. [9]
The company has two employees, including Baslee and ships an average of one kit per week. The company has about 500 aircraft flying. [9]
The company is best known for its construction of four full-scale Nieuport 17 aircraft for the 2006 film Flyboys during a period of 52 days. The company also built a Morane L for the 2009 film Amelia. [9]
References: Kitplanes [4] and Airdrome Aeroplanes [8]
Model name | First flight | Number built | Type |
---|---|---|---|
Bleriot Model XI | 1 | Pioneer aircraft replica | |
Dream Classic | 49 | Inspired by the pioneer Santos-Dumont Demoiselle | |
Dream Fantasy Twin | 4 | Two-seat version of the Dream Classic | |
Eindecker E-III | 14 | World War I aircraft replica | |
Fokker DR-1 | 23/5 | World War I aircraft replica in 3/4 scale and full size | |
Fokker D-VI | 7 | World War I aircraft replica in 3/4 scale | |
Fokker D-VII | 2 | World War I aircraft replica 80% scale | |
Fokker D-VIII | 16 | World War I aircraft replica in 3/4 scale | |
Taube | 1 | World War I aircraft replica | |
Morane Saulnier L | 1 | World War I aircraft replica | |
Nieuport 11 | 1 | World War I aircraft replica 7/8 scale | |
Nieuport 17 | 7 | World War I aircraft replica | |
Nieuport 24 | 12 | World War I aircraft replica | |
Nieuport 25 | World War I aircraft replica | ||
Nieuport 28 | 1 | World War I aircraft replica | |
Sopwith Pup | 2 [10] | World War I aircraft replica | |
Sopwith Camel | 1 | World War I aircraft replica | |
Sopwith Baby | 1 | World War I aircraft replica | |
DeHavilland DH-2 | 2 | World War I aircraft 80% scale replica | |
The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.
The Airdrome Eindecker E-III is a single-seat, mid-wing, conventional landing gear fighter aircraft replica produced in kit form by Airdrome Aeroplanes of Holden, Missouri.
The Circa Reproductions Nieuports are a family of Canadian 7/8 scale World War I sesquiplane aircraft replicas designed by Graham Lee of Lamont, Alberta for amateur construction from plans sold by Lee's company Circa Reproductions. Leading Edge Air Foils of Peyton, Colorado at one time also made construction kits available. Lee's Nieuports were among the earliest First World War replicas available and paved the way for later companies to produce plans and kits for a great variety of warbirds.
The RagWing RW19 Stork is a family of two-seat, high wing, strut-braced, conventional landing gear, single-engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
RagWing Aircraft Designs was an American aircraft design and manufacturing company based in Taylors, South Carolina.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Carlson Skycycle is an American, single-seat, low-wing, single-engine, homebuilt aircraft that was originally designed by A. Hanford Eckman in 1945 and re-designed as a replica by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio in kit form. The prototype was completed in 1995.
Carlson Aircraft is an American aircraft design and manufacturing company based in East Palestine, Ohio.
The Sands Replica 1929 Primary Glider is an American high-wing, wire-braced single-seat, primary glider that was designed by Ron Sands Sr for amateur construction, with kits supplied by Wicks Aircraft Supply. The plans are now sold by Sands' son, Ron Sands Jr.
The Airdrome Fokker DR-1 is an American amateur-built aircraft, designed and produced by Airdrome Aeroplanes, of Holden, Missouri. The aircraft is supplied as a kit for amateur construction and is available in two versions, a full-sized and a 3/4 scale replica.
The Walter Redfern Company, also called Redfern Plans, was an American aircraft manufacturer based in Post Falls, Idaho and founded by Walter "Wimpy" Redfern. The company specialized in the design and provision of plans for homebuilt aircraft, particularly replica aircraft of the First World War.
Moyes Delta Gliders is an Australian aircraft manufacturer based in Kurnell, New South Wales. The company was founded by Bill Moyes in 1967 and specializes in the design and manufacture of hang gliders. The company's designs have won many world, national and regional championships.
Teratorn Aircraft, Inc. was an American aircraft manufacturer based in Clear Lake, Iowa. The company specialized in the design and manufacture of ultralight aircraft in the form of kits for amateur construction and ready-to-fly aircraft under the US FAR 103 Ultralight Vehicles rules.
Golden Circle Air, Inc. was an American aircraft manufacturer based in De Soto, Iowa. The company specialized in the manufacture of ultralight aircraft in the form of kits for amateur construction and ready-to-fly aircraft under the US FAR 103 Ultralight Vehicles rules.
Pop's Props was an American aircraft manufacturer, founded by Scott Land in about 1994 and based in Cooksville, Illinois. The company specialized in the design and manufacture of ultralight aircraft in the form of plans and kits for amateur construction and operation under the US FAR 103 Ultralight Vehicles rules.
Light Miniature Aircraft was an American aircraft manufacturer based in Okeechobee, Florida. The company specialized in the design of ultralight aircraft and supplied plans for amateur construction.
Sorrell Aviation was an American aircraft manufacturer based in Tenino, Washington, founded by Hobart C Sorrell and sons John, Mark and Tim in about 1958. The company specialized in the design and manufacture of light aircraft in the form of plans and kits for amateur construction including for the US FAR 103 Ultralight Vehicles rules.
CGS Aviation, Inc. is an American aircraft manufacturer based in Grand Bay, Alabama. The company was founded by Chuck Slusarczyk in the early 1970s in Broadview Heights, Ohio as Chuck's Glider Supplies. Today it is run by Danny Dezauche and specializes in the design and manufacture of ultralight aircraft in the form of kits for amateur construction and ready-to-fly aircraft in the US FAR 103 Ultralight Vehicles rules category.