Airdrome Dream Classic

Last updated
Dream Classic
Role Ultralight aircraft
National origin United States
Manufacturer Airdrome Aeroplanes
DesignerRobert Baslee
Number built56 (2011)
Developed from Santos-Dumont Demoiselle

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri. [1] [2] [3] [4] [5] [6]

Contents

The aircraft is intended for the US FAR 103 Ultralight Vehicles category. [1]

Development

The Dream Classic was designed as a low-cost and very basic ultralight. The fuselage is open and constructed from pop-riveted [ broken anchor ] aluminum tubing. The wing is covered with aircraft fabric and is wire-braced utilizing a kingpost to support the ground loads or optionally strut-braced. The wings can be removed in 20 minutes for trailering. Controls are conventional three-axis, with the elevator and ailerons operated by a side stick. [1] [3] [5]

Two different wings are available, a standard wing of 30.5 ft (9.3 m) span and 122 sq ft (11.35 sq m) area and a speed wing of 21.5 ft (6.6 m) span and 86 sq ft (8.00 sq m) area. The speed wing restricts the aircraft's useful load to 170 lb (77 kg), while the standard wing allows 250 lb (113 kg). [1] [5]

The standard engine is the 40 hp (30 kW) Rotax 447, although engines of 28 to 52 hp (21 to 39 kW) can be used. The manufacturer estimates that a builder will take 100–120 hours to complete this aircraft from the kit. In 2009 the airframe-only kit for the wire-braced version cost US$3495 and US$3995 for the strut-braced version. A completed airframe is also available for an additional US$2000. [1] [5] [7]

By the fall of 2007, 48 wired braced and one strut-braced Dream Classics were flying. [4]

Variants

Dream Classic Standard
Single seat ultralight with 30.5 ft (9.3 m) wingspan and 122 sq ft (11.35 sq m) wing area, standard engine 40 hp (30 kW) Rotax 447
Dream Classic Speed
Single seat ultralight with 21.5 ft (6.6 m) wingspan and 86 sq ft (8.00 sq m) wing area, standard engine 40 hp (30 kW) Rotax 447

Specifications (Dream Classic Speed)

Data from Airdrome Aeroplanes [5] & Kitplanes [3] [4]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Chotia Weedhopper</span> American ultralight airplane

The Weedhopper is an American high-wing, tractor configuration, tricycle gear, two-axis control ultralight aircraft originally developed by John Chotia during the height of the 1970s ultralight boom and introduced in 1977. When it was in production the aircraft was sold as a kit for amateur construction and could be assembled in 25-30 man-hours.

<span class="mw-page-title-main">Fisher Avenger</span> Canadian ultralight aircraft

The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.

<span class="mw-page-title-main">Lockwood Drifter</span> Type of aircraft

The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.

<span class="mw-page-title-main">Airdrome Eindecker E-III</span> Type of aircraft

The Airdrome Eindecker E-III is a single-seat, mid-wing, conventional landing gear fighter aircraft replica produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

<span class="mw-page-title-main">Flightstar</span> Type of aircraft

The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.

The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

<span class="mw-page-title-main">Fisher FP-404</span> Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States, but the company is now located in Woodbridge, Ontario, Canada.

<span class="mw-page-title-main">CGS Hawk</span> Type of aircraft

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

<span class="mw-page-title-main">Team Mini-Max Hi-MAX</span> American kit aircraft

The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.

<span class="mw-page-title-main">Kolb Mark III</span> Type of aircraft

The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction.

<span class="mw-page-title-main">Phantom X1</span> Type of aircraft

The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form.

The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.

<span class="mw-page-title-main">M-Squared Breese</span> Type of aircraft

The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.

<span class="mw-page-title-main">North Wing Maverick</span> American ultralight trike aircraft

The North Wing Maverick is an American single-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

The Norman Aviation Nordic II is a Canadian advanced ultralight aircraft, designed by Jacques Norman and produced by Norman Aviation of Saint-Anselme, Quebec, first flying in 1986. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft and remained in production through 2012.

The Airdrome Fokker DR-1 is an American amateur-built aircraft, designed and produced by Airdrome Aeroplanes, of Holden, Missouri. The aircraft is supplied as a kit for amateur construction and is available in two versions, a full-sized and a 3/4 scale replica.

The Airdrome Fokker D-VI is an American amateur-built aircraft, designed and produced by Airdrome Aeroplanes, of Holden, Missouri. The aircraft is supplied as a kit for amateur construction.

The Airdrome Dream Fantasy Twin is an American ultralight trainer and amateur-built aircraft, designed and produced by Airdrome Aeroplanes, of Holden, Missouri. The aircraft was derived from the single seat Airdrome Dream Classic and is supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-14. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. ↑ Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 110. BAI Communications. ISBN   0-9636409-4-1
  3. 1 2 3 Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 35. Primedia Publications. ISSN 0891-1851
  4. 1 2 3 Downey, Julia: 2008 Kit Aircraft Directory, Kitplanes, Volume 24, Number 12, December 2007, page 38. Primedia Publications. ISSN 0891-1851
  5. 1 2 3 4 5 Airdrome Aeroplanes (2009). "The Dream Classic". Archived from the original on 13 December 2010. Retrieved 2009-10-01.
  6. ↑ Vandermeullen, Richard: 2011 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 39. Belvoir Publications. ISSN 0891-1851
  7. ↑ Airdrome Aeroplanes (2009). "Airdrome Aeroplanes Order Form". Archived from the original on 2009-09-26. Retrieved 2009-10-01.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.