L II | |
---|---|
Arado L IIa at Tempelhof. July 1930 | |
Role | Touring aircraft |
Manufacturer | Arado |
Designer | Walter Rethel |
First flight | 1929 |
Number built | 5 |
The Arado L II was a 1920s German two-seat, high-wing touring monoplane.
In 1930, a revised version with folding wings and improved undercarriage, the L IIa first flew, and four examples took part in the Challenge International de Tourisme 1930, starting from Berlin-Tempelhof airport, but none placed, and one crashed early in the race. Two examples competed in the Deutschlandflug [ de ] in 1931. [1] [2]
Data from German Aviation 1919 – 1945 [1]
General characteristics
Performance
The Arado Ar 240 was a German twin-engine, multi-role heavy fighter aircraft, developed for the Luftwaffe during World War II by Arado Flugzeugwerke. Its first flight was in 1940, but problems with the design hampered development, and it remained only marginally stable throughout the prototype phase. The project was eventually cancelled, with the existing airframes used for a variety of test purposes.
The Fieseler Fi 167 was a 1930s German biplane torpedo and reconnaissance bomber designed for use from the Graf Zeppelin class aircraft carriers under construction from 1936 to 1942.
The Arado Ar 96 was a German single-engine, low-wing monoplane of all-metal construction, produced by Arado Flugzeugwerke. It was the Luftwaffe's standard advanced trainer during World War II.
The Albatros Al 101 was a 1930s German trainer aircraft. It was a parasol-wing monoplane of conventional configuration, and seated the pilot and instructor in separate, open cockpits.
The Arado 95 was a single-engine reconnaissance and patrol biplane designed and built by the German firm Arado in the late 1930s. Ordered by Chile and Turkey, a number were taken over by the Kriegsmarine when World War II started.
The Arado Ar 76 was a German aircraft of the 1930s, designed as a light fighter with a secondary role as an advanced trainer in mind.
The Arado L I was a two-seat parasol-wing sport monoplane built in Germany in 1929, in order to compete in the Europa Rundflug that year. During the fuel consumption trials, the L 1 made a forced landing and was disqualified from the contest. Bringing the aircraft back to Paris, designer Hermann Hofmann performed some aerobatics over the airfield and was killed when it crashed.
The Arado S I was a biplane trainer built in Germany in 1925. The first of three prototypes was powered by a Bristol Lucifer radial engine, while the other two Arado S.Ia aircraft were fitted with the Siemens-Halske Sh 12. The Siemens-Halske Sh 11 powered the Arado S III, a virtually identical aircraft of which only a single prototype was constructed and sold to Turkey.
The Arado SC I was a biplane trainer developed in Germany in the 1920s. It was based on the S I, but powered by a far more powerful inline engine. Accordingly, the structure received considerable strengthening. The aircraft was intended for the clandestine military flying school at Lipetsk, but it was not accepted for this service. Instead, a small number were built for the Deutsche Verkehrsfliegerschule.
The Arado SC II was a biplane trainer, developed in Germany in the 1920s. It was based heavily on the SC I, with a more powerful BMW Va engine. Ten examples were built for the Deutsche Verkehrsfliegerschule.
The Arado SD I was a fighter biplane, developed in Germany in the 1920s. It was intended to equip the clandestine air force that Germany was assembling at Lipetsk. The layout owed something to designer Walter Rethel's time with Fokker. Of conventional configuration, the SD I featured a welded steel tube frame, metal-covered ahead of the cockpit, and fabric-covered aft of it. The wooden sesquiplane wings were braced with N-type interplane struts, without any wires - a typical Fokker feature.
The Arado SD II was a fighter biplane developed in Germany in the 1920s. Like the preceding SD I, it was intended to equip the clandestine air force that Germany was assembling at Lipetsk and was hoped to overcome the shortcomings of that type. Although it shared the same basic configuration, the SD II was an all-new design. A considerably larger and heavier aircraft, it had wings of less stagger, braced with conventional wires. The landing gear and tailplane were of far stronger construction.
The Arado SSD I was a biplane fighter seaplane developed in Germany in 1930, intended to be launched from catapults on warships. This was an all-new design from Walter Rethel, sharing nothing with his other fighter designs for Arado of the late 1920s. It was a conventional unequal-span, staggered biplane, with the slightly gulled top wing attached to the upper fuselage. It was equipped with a single, large float under the fuselage and two outrigger floats near the wingtips. After evaluation at Travemünde, the floats were removed and a simple, wheeled undercarriage was fitted for competitive evaluation with the Heinkel HD 38 at Lipetsk. The Heinkel was selected, and the SSD I was relegated to trainer duties with the LVS in 1932.
The Arado V.1 was a prototype airliner, built in Germany in 1927. It was a single-engine, high-wing braced monoplane with tailwheel undercarriage. It made several long-distance flights, including carrying mail to South America, before being exhibited in Berlin in 1929, when it was bought by Deutsche Luft Hansa.
The Arado W 2 was a two-seat twin-engine seaplane trainer developed for the DVS in 1928. It was a cantilever monoplane with a fabric-covered steel tube fuselage that accommodated the pilot and instructor in tandem open cockpits. The undercarriage consisted of two pontoons carried on steel struts.
The Blume Bl.500, Bl.502, and Bl.503 were a family of four-seat light aircraft designed in West Germany by Dr Walter Blume in the late 1950s.
The Caspar C 32 was an aircraft developed in Germany for aerial spraying in the late 1920s. It was a single-bay biplane with staggered, equal-span wings that accommodated the pilot and a single passenger or observer in tandem open cockpits. A small, additional horizontal stabiliser was fitted near the top of the tall single tail fin above the main horizontal stabiliser.
The Dornier N was a bomber aircraft designed in Germany in the 1920s for production in Japan. Production of 28 aircraft started in Japan in 1927, as the Kawasaki Ka 87. Designed and built as a landplane, its layout was strongly reminiscent of the Dornier flying boats of the same period; a parasol-wing, strut-braced monoplane with two engines, mounted in a push-pull nacelle above the wing. Some of the 28 examples built saw action in Manchuria in 1931.
The Heinkel HE 8 was a reconnaissance floatplane built in Germany in the late 1920s. It was developed at the request of the Danish Navy, which had noted the success of the HE 5 in Swedish service, and wished to purchase a similar aircraft as well as licensed production as the Orlogsvaerftet HM.II. Apart from its new Armstrong Siddeley engine, the HE 8 also differed from the HE 5 and previous members of the HE 1 family in having a conventional empennage. 22 aircraft were operated until the German invasion in 1940, after which one example was impressed into Luftwaffe service and the remainder placed in storage.
The Dornier Do Y was a German bomber of the 1930s, the second bomber design by Dornier Flugzeugwerke.