Arado E.583 | |
---|---|
Role | Night fighter twinjet project |
Manufacturer | Arado Flugzeugwerke |
Number built | Not produced |
The Arado E.583 (Arado Ar P.I ) was a project design from 1945 for a jet-powered night fighter aircraft of the German manufacturer Arado Flugzeugwerke.
The design of the E.583 goes back to the E.581, an earlier project by Arado, in which design variants for a single-beam, tailless night fighter were also examined. The starting point for the E.581 was again the studies in connection with the project E.555 for a multi-beam long-range bomber. However, due to the long inlet and the large hull surface, the Heinkel HeS-011 jet engine of the E.581, which was integrated into the fuselage, could only expect inadequate performance in the high-speed sector.
Arado then created two new project designs in accordance with the guidelines issued in January 1945 for the optimal solution of a night fighter. Under the overall designation E.583, the studies Ar-I and Ar-II - also referred to as Project I and II - were presented at the same time.
The Ar-I was based on the draft E.581-5, but had much larger dimensions. The experts criticized on 20./21. March 1945 again the resistance generating engine intakes and large surfaces. Arado then improved the design so that a third crew member and a larger amount of fuel could be included. A third variant received smaller and more swept wings. Allegedly, it is said to have served as inspiration for the US Vought F7U-3 Cutlass. However, head of the aerodynamic research department of Vought, William C. Schoolfield, denied that any orientation towards German research has taken place. [1]
The Ar-II was regarded as an easier to implement night fighter. The design had swept wings and was strongly based on the Arado Ar 234 and the study TEW 16 / 43-23. The maximum speed was calculated at 775 km / h, lower than that of the Ar-I.
The Ar I was designed as a tailless aircraft, in which the ailerons also served as horizontal stabilizer. The two rudders were each placed on top of the wings.
Data from Arado E.583
General characteristics
Performance
Armament
The Arado Ar 234 Blitz was the world's first operational jet-powered bomber, built by the German Arado company during World War II.
The Vought F7U Cutlass is a United States Navy carrier-based jet fighter and fighter-bomber of the early Cold War era. It was a tailless aircraft for which aerodynamic data from projects of the German Arado and Messerschmitt companies, obtained at the end of World War II through German scientists who worked on the projects, contributed, though Vought designers denied any link to the German research at the time. The F7U was the last aircraft designed by Rex Beisel, who was responsible for the first fighter ever designed specifically for the U.S. Navy, the Curtiss TS-1 of 1922.
The Focke-Wulf Ta 183 Huckebein was a design for a jet-powered fighter aircraft intended as the successor to the Messerschmitt Me 262 and other day fighters in Luftwaffe service during World War II. It had been developed only to the extent of wind tunnel models when the war ended, but the basic design was further developed postwar in Argentina as the FMA IAe 33 Pulqui II. The name Huckebein is a reference to a trouble-making raven from an illustrated story in 1867 by Wilhelm Busch.
The Messerschmitt P.1101 was a single-seat, single-jet fighter project of World War II, developed as part of the 15 July 1944 Emergency Fighter Program which sought a second generation of jet fighters for the Third Reich. A prominent feature of the P.1101 prototype was that the sweep angle of the wings could be changed before flight, a feature further developed in later variable-sweep aircraft such as the Bell X-5 and Grumman XF10F Jaguar.
The I.Ae. 30 "Ñancú" was an Argentine twin piston engined fighter designed by the Instituto Aerotécnico in the late 1940s, similar to the de Havilland Hornet, but made of metal rather than wood. Only one prototype was completed; the project was abandoned in favour of the FMA I.Ae. 27 Pulqui I jet aircraft.
The Messerschmitt P.1112 was a proposed German jet fighter, developed by Messerschmitt AG during the closing stages of World War II, and intended for use by the Luftwaffe. The progress of the war prevented the completion of a prototype before the fall of Nazi Germany. Its design, however, had a direct influence on postwar US Navy carrier fighters.
The Heinkel He P.1079 was a projected German V-tail all weather jet fighter designed by Heinkel Flugzeugwerke in the closing stages of World War II. The aircraft was only a design; it was not produced.
The Arado E.381 was a proposed parasite fighter aircraft. Conceived by Arado Flugzeugwerke in December 1944 for Germany's Luftwaffe during World War II, the E.381 was to have been carried aloft by and launched from an Arado Ar 234 "mother" aircraft. It would then have activated its rocket engine, which would have propelled it to attack Allied bombers. Development was cancelled due to lack of funds and official support.
The Blohm & Voss P 212 was a proposed jet fighter designed by Blohm & Voss for the Emergency Fighter Program Luftwaffe design competition during the Second World War.
The Blohm & Voss P 211 was a design proposal submitted by Blohm & Voss to the Volksjäger jet fighter competition of the Luftwaffe Emergency Fighter Program towards the end of the Second World War.
The Junkers EF 128 was a project for a single-engine jet fighter, developed for the Emergency Fighter Program Luftwaffe design competition during the Second World War.
The Heinkel P.1078 was a single seat interceptor developed for the Luftwaffe by Heinkel aircraft manufacturing company under the Emergency Fighter Program during the last years of the Third Reich.
The Messerschmitt P.1110 was a design for a single-seat, high-altitude interceptor, prepared for the German Luftwaffe by the Messerschmitt aircraft manufacturing company, under the Emergency Fighter Program during the last months of World War II.
The Arado E.560 was a series of multi-engined Arado medium-range tactical bombers projected during the Second World War.
The Blohm & Voss Bv P 188 was a long-range, heavy jet bomber design project by the Blohm & Voss aircraft manufacturing division during the last years of the Third Reich. It featured a novel W-wing planform with variable incidence.
The Gotha Go P.60 was a jet-powered flying wing fighter proposed during World War II by Gothaer Waggonfabrik (Gotha). It was conceived as an improved derivative of the single-seat Horten Ho 229, which Gotha had begun to manufacture as the Go 229. The initial concept a two-seat multi-role fighter that was subsequently developed into a three-seat night and all-weather fighter, but no variant was ever built.
The Blohm & Voss P215 was an advanced jet night fighter project by Blohm & Voss during the Second World War. With a crew of three and twin jet engines, it featured a tailless swept-wing layout and heavy armament. An order for three prototypes was received just weeks before the war ended.
The Blohm & Voss P 209 was one of a series of single-engined jet fighter design studies. Under development in the latter half of 1944, when the single-engined jet fighter requirement was issued the P 209 was radically revised to meet the deadline but was not taken further by the RLM.
The Messerschmitt P.1107 was a jet-powered bomber project developed in the final years of the Second World War.