Autobianchi A111

Last updated
Autobianchi A111
Autobianchi A111 black.jpg
Autobianchi A111 (series 1)
Overview
Manufacturer Autobianchi
Production1969–1972
Assembly Desio, Milan, Italy
Designer Dante Giacosa
Body and chassis
Class Family car
Body style 4-door saloon
Layout Transverse front-engine, front-wheel-drive
Related Autobianchi Primula
Powertrain
Engine 1.4 L Fiat 124 BLC I4
Transmission 4-speed manual
Dimensions
Wheelbase 2,363 mm (93.0 in) [1]
Length4,020 mm (158.3 in) [1]
Width1,610 mm (63.4 in) [1]
Height1,400 mm (55.1 in) [1]
Kerb weight 930 kg (2,050 lb) [1]
Chronology
Predecessor Autobianchi Primula

The Autobianchi A111 is a 4-door saloon family car produced from 1969 to 1972 by Italian car manufacturer Autobianchi, a subsidiary of the Fiat group. [2] Despite rather modest dimensions, at roughly 4 metres long, it was the largest Autobianchi ever made, as the brand specialized in small cars. A modern front-wheel drive construction like the Fiat 128 launched concurrently, it was based on the revolutionary Autobianchi Primula, Fiat's first "experiment" with the transverse engine front-wheel-drive setup. [3]

Contents

History

Development

In 1957 Autobianchi produced the Bianchina, an upmarket version of the Fiat 500, and the Primula small family car. Offered both as a fastback saloon and hatchback, the 1964 Primula was Fiat's first front-wheel drive production car. It had pioneered the transverse-engined front-wheel drive layout with the transmission and clutch to the left of the engine, which today is almost universally used on front-wheel drive cars. The brainchild of Dante Giacosa [lower-alpha 1] this mechanical layout had been developed for the Fiat 123, an experimental project undertaken to test various unconventional engine and transmission layouts for a mid-sized 1100 replacement; when Fiat's management endorsed the traditionally laid out (front-longitudinal engine, rear-wheel drive) 124 instead, it had spawned the innovative Autobianchi Primula. [4]

To replace the Primula the managing director of Autobianchi, Enrico Ghiretti, desired a new three-box saloon. [5] According to Giacosa's memoirs, Ghiretti feared competition from the upcoming front-wheel drive Fiat 128 small family car (at the time still known as project X1/1) and was a proponent of conservative three-box styling, as opposed to than the Primula's current 2-box hatchback or fastback bodies. [5] The project was authorized by Fiat management, but since Fiat's style centre was already overworked, decision was taken to use a design for the dismissed project 123. [5] The chosen design was the most recent proposal for the transverse-engined front-wheel drive 123 E4; it was updated, chiefly in the front end to incorporate new rectangular headlamp lenses, and approved by Ghiretti for production. [5] Therefore, on the outside the A111's lines unsurprisingly recalled coeval Fiat designs, especially the 124 and 128. [3] Christened A111, the new car—albeit larger in size—was based on the Primula's platform and mechanicals, and used the 1.4-litre drivetrain of the most powerful Primula, the Coupé S of 1968. Size-wise, the A111 slotted between Fiat's 128 and 124 sedans, being also significantly bigger than the previously biggest Autobianchi, the said Primula.

Launch, updates and demise

The Autobianchi A111 was introduced in April 1969, [6] and deliveries began in May. [1] The interior, seating four or five, was rather well-appointed, with a genuine wood fascia on the dashboard, [7] individual sliding and reclining front seats, fully carpeted floor, and cloth, cloth-and-leatherette or full leatherette upholstery. Autobianchi advertised a top speed of 155 km/h (96 mph). [6]

A lightly revised A111 was introduced at the 52nd Turin Motor Show in October/November 1970. [8] A distinguishing feature of these "series 2" cars were double-stacked tail lamps, of the same design seen on the original A111. [8] New bumpers gained rubbing strips but dispensed with the over-riders (bringing overall length to less than four metres), there was new model badging on the tail, and the interior was partly redesigned, including a new centre console and a shorter gear shifter. [8]

As the 1970s progressed, Fiat has introduced an increasing number of FWD cars under its own brand, and thus the Autobianchis became redundant. The last A111 left the production line in 1972, making the total number produced 56,984. [2] [3] The A111 remained without a direct replacement within the Autobianchi range, and thus the brand was reduced to a single model—the A112 upmarket supermini and its successor the Y10, the last car to bear the Autobianchi badge.

Specifications

The Autobianchi A111 was a unibody front-wheel drive 4-door sedan with a transversely mounted engine. The Fiat type 124 BLC.000 1.4-litre overhead valve four-cylinder unit was the same installed on the Fiat 124 Special and on the Autobianchi Primula Coupé S; [9] [lower-alpha 2] The four-cylinder had a displacement of 1,438 cubic centimetres, a bore and stroke of 81 and 71.5 mm, and a compression ratio of 9.3:1. [7] Fed by a twin-choke downdraught Weber 32 DFB carburettor, [7] it produced 70 PS DIN (51 kW; 69 hp) – 75 PS SAE [1] – at 5,400 rpm, and 108 N⋅m DIN (80 lb⋅ft) at 3,000 rpm. [9] The engine was mated to an all-synchromesh 4-speed manual transmission with floor-mounted shifter. Neither an automatic or different engine options were offered. [10]

Suspension was as on the Primula. At the front it consisted of A-arms and an upper transverse leaf spring, which doubled both as upper link and an anti-roll bar, as well as providing the attachment point for double-acting hydraulic dampers; at the rear there was a beam axle on longitudinal semi-elliptic leaf springs, plus double-acting hydraulic dampers.

Steering was by means of a rack-and-pinion mechanism positioned beneath the transverse leaf spring and behind the engine. [11] The braking system comprised four disk brakes, front-rear split hydraulic circuits, a vacuum servo and proportioning valve on the rear axle. [9]

Notes

  1. ↑ At the head of Fiat's technical office, Giacosa had been experimentation with transverse-engined front-drive cars since the 1940s.
  2. ↑ This engine should not be confused with a more powerful engine of the same displacement from the Fiat Twin Cam series, which was installed in the 124 Special T, but not in the A111.

Related Research Articles

<span class="mw-page-title-main">Autobianchi</span> Italian automobile manufacturer

Autobianchi was an Italian automobile manufacturer, created jointly by Bianchi, Pirelli and Fiat in 1955. Autobianchi produced only a handful of models during its lifetime, which were almost exclusively small cars, with the biggest being the short-lived Autobianchi A111, a small family car. Autobianchis were priced higher than Fiat models of similar size and the brand was used by Fiat to test innovative concepts which later found their way into mainstream Fiat vehicles; these concepts included fibreglass bodies and front-wheel drive.

<span class="mw-page-title-main">Fiat 128</span> Small family car

The Fiat 128 is a transverse front-engine, front wheel drive small family car manufactured and marketed by Fiat from 1969 to 1985 as a two- or four-door sedan, three- or five-door station wagon as well as two- or three-door coupé. The 128 running gear and engine, reconfigured for a mid-engined layout, were used in the Fiat X1/9 sports car.

<span class="mw-page-title-main">Fiat X1/9</span> Motor vehicle

The Fiat X1/9 is an Italian two-seater mid-engined sports car designed by Bertone and manufactured by Fiat from 1972–1982 and subsequently by Gruppo Bertone from 1982–1989.

<span class="mw-page-title-main">Fiat 127</span> Motor vehicle

The Fiat 127 is a supermini car produced by Italian car manufacturer Fiat from 1971 to 1983. It was introduced in 1971 as the replacement for the Fiat 850. Production of the 127 in Italy ended in 1983 following the introduction of its replacement, the Fiat Uno, although the nameplate continued to be used on cars imported from Brazil.

<span class="mw-page-title-main">Fiat 124</span> Motor vehicle

The Fiat 124 is a small family car manufactured and marketed by Italian company Fiat between 1966 and 1974. The saloon superseded the Fiat 1300 and was the basis for several variants including a station wagon, a four-seater coupé, and a two-seater convertible

<span class="mw-page-title-main">Fiat 500</span> Motor vehicle

The Fiat 500 is an economy / city car that was manufactured and marketed by Fiat Automobiles from 1957 until 1975. It was sold as a two-door semi-convertible or saloon car and as a three-door panel van or estate car.

<span class="mw-page-title-main">Fiat Dino</span> Motor vehicle

The Fiat Dino was a front-engine, rear-wheel-drive sports car produced by Fiat from 1966 to 1973. The Dino name refers to the Ferrari Dino V6 engine, produced by Fiat and installed in the cars to achieve the production numbers sufficient for Ferrari to homologate the engine for Formula 2 racing.

<span class="mw-page-title-main">Front-wheel drive</span> Automotive transmission where the engine drives the front wheels only

Front-wheel drive (FWD) is a form of engine and transmission layout used in motor vehicles, in which the engine drives the front wheels only. Most modern front-wheel-drive vehicles feature a transverse engine, rather than the conventional longitudinal engine arrangement generally found in rear-wheel-drive and four-wheel-drive vehicles.

<span class="mw-page-title-main">Front-engine, front-wheel-drive layout</span> Term used in automotive technology

In automotive design, a front-engine, front-wheel-drive (FWD) layout, or FF layout, places both the internal combustion engine and driven roadwheels at the front of the vehicle.

<span class="mw-page-title-main">Fiat 600</span> Italian car manufactured from 1955 to 1969

The Fiat 600 is a small, rear-engined city car and economy family car made by Italian carmaker Fiat from 1955 to 1969 — offered in two-door fastback sedan and four-door Multipla mini MPV body styles. The 600 is considered a pop icon of the Italian economic miracle, and the three-row seating Multipla, though diminutive and odd-looking, is seen as one the first mass-produced minivans.

<span class="mw-page-title-main">Lancia Fulvia</span> Motor vehicle

The Lancia Fulvia is a car produced by Lancia between 1963 and 1976. Named after Via Fulvia, the Roman road leading from Tortona to Turin, it was introduced at the Geneva Motor Show in 1963 and manufactured in three variants: Berlina 4-door saloon, 2-door Coupé, and Sport, an alternative fastback coupé designed and built by Zagato on the Coupé floorpan.

<span class="mw-page-title-main">Lancia Beta</span> Italian car produced 1972 to 1984

The Lancia Beta was an entry-level luxury car produced by Italian car manufacturer Lancia from 1972 to 1984. It was the first new model introduced by Lancia after it had been taken over by Fiat in 1969.

<span class="mw-page-title-main">Autobianchi Primula</span> Motor vehicle

The Autobianchi Primula is a supermini economy car manufactured between 1964 and 1970 by the Italian automaker Autobianchi, partly owned by and later a subsidiary of the Fiat Group. The Primula was a prototype for Fiat's rack and pinion steering and is widely known for its innovative Dante Giacosa-designed front-wheel drive, transverse engine layout — that would be later popularized by the Fiat 128 to ultimately become an industry-standard front drive layout.

<span class="mw-page-title-main">Transverse engine</span> Vehicle engine whose crankshaft axis is perpendicular to the direction of travel

A transverse engine is an engine mounted in a vehicle so that the engine's crankshaft axis is perpendicular to the direction of travel. Many modern front-wheel drive vehicles use this engine mounting configuration. Most rear-wheel drive vehicles use a longitudinal engine configuration, where the engine's crankshaft axis is parallel with the direction of travel, except for some rear-mid engine vehicles, which use a transverse engine and transaxle mounted in the rear instead of the front. Despite typically being used in light vehicles, it is not restricted to such designs and has also been used on armoured fighting vehicles to save interior space.

<span class="mw-page-title-main">Lancia Prisma</span> Motor vehicle

The Lancia Prisma is a small family car built by Italian car manufacturer Lancia between 1982 and 1989. It was a saloon version of the first generation Lancia Delta hatchback, and like the Delta it was designed by Giorgetto Giugiaro. Like the Delta it was also available as a 4x4 integrale version, although with a non-turbocharged engine and an air-locking rear differential.

<span class="mw-page-title-main">Dante Giacosa</span> Italian automobile designer

Dante Giacosa was an Italian automobile designer and engineer responsible for a range of Italian automobile designs — and for refining the front-wheel drive layout to an industry-standard configuration.

<span class="mw-page-title-main">Fiat 1300 and 1500</span> Motor vehicle

The Fiat 1300 and Fiat 1500 are a series of front-engine, rear-drive automobiles manufactured and marketed by Fiat from 1961 to 1967, replacing the Fiat 1400 and Fiat 1200 coupé, spyder and cabriolet. The 1300 and 1500 were essentially identical to each other except for their engine displacement, as indicated by their model names, and were offered in sedan/saloon, station wagon, convertible and coupé body styles which shared little mechanically with the other body styles except the 1500 engine.

<span class="mw-page-title-main">Mebetoys</span>

Meccanica Bessana Toys, was an Italian toy manufacturer that produced die-cast scale model cars during the 1960s and 1970s.

<span class="mw-page-title-main">Fiat Trepiùno</span> Motor vehicle

The Fiat Trepiùno is a transverse front-engine, front-wheel drive, four-passenger concept city car introduced by Fiat at the 2004 Geneva Salon international de l'auto; styled at the Centro Stile Fiat; powered by a 54 hp 1100cc engine and built by the Turin-based company, I.DE.A.

<span class="mw-page-title-main">Autobianchi A112 Runabout</span> Motor vehicle

The Autobianchi A112 Runabout is a concept car developed by Bertone and first shown in 1969. The small two-seat, mid-engined car was the inspiration for the Fiat X1/9 that appeared in 1972.

References

  1. 1 2 3 4 5 6 7 Bernabò, Ferruccio (7 May 1969). "Prova a Monza della nuova berlina Autobianchi "A 111"" [Autobianchi's new "A 111" saloon tested at Monza]. La Stampa (in Italian). p. 15. Retrieved 29 November 2015.
  2. 1 2 "Historie". Italienske Biler (in Danish). Archived from the original on 27 September 2007. Retrieved 3 August 2006.
  3. 1 2 3 "Autobianchi A111". carsfromitaly.net. Retrieved 3 August 2006.
  4. ↑ Giacosa, Dante (2014) [1st pub. Automobilia, 1979]. I miei 40 anni di progettazione alla Fiat (PDF) (in Italian). Centro Storico Fiat.
  5. 1 2 3 4 Giacosa 2014, p. 329.
  6. 1 2 Bernabò, Ferruccio (27 April 1969). "Anche l'Autobianchi presenta una novità: la berlina "A 111"". La Stampa (in Italian). p. 8. Retrieved 30 November 2015.
  7. 1 2 3 Autobianchi A111—Uso e manutenzione (owner's manual) (3rd ed.). Fiat S.p.A. azienda Autobianchi—Ufficio pubblicazioni tecniche. November 1969.
  8. 1 2 3 "Autobianchi: una produzione di alto livello qualitativo". La Stampa (in Italian). 4 November 1970. p. 22. Retrieved 30 November 2015.
  9. 1 2 3 Cinti, Fulvio (7 December 1969). "Il test: Berlina Autobianchi "A 111"—"Tutto avanti" all'italiana" [Tested: Autobianchi "A 111" saloon—an Italian front-driver]. Stampa Sera (in Italian). p. 10. Retrieved 30 November 2015.
  10. ↑ Auto Katalog 1970 (in German). Vol. 13. Stuttgart: Vereinigte Motor-Verlage GmbH. 1969. pp. 24–25.
  11. ↑ Bulmer, Charles (31 May 1969). "New Autobianchi". Motor (3493): 67.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.