| AC-6 | |
|---|---|
 | |
| Role | Motor glider concept Glider production |
| National origin | Russia |
| Manufacturer | Aviastroitel |
| Status | In production |
The Aviastroitel AC-6 is a Russian mid-wing, single-seat FAI 15 Metre Class glider that was designed and manufactured by Aviastroitel, now Glider Air Craft. [1] [2]
The aircraft was originally conceived as a retractable engine motor glider, to be a competitor to the Albastar Apis, but instead it was put into production as a conventional unpowered glider. [1] [2]
The company states the design goal of the AC-6 as a glider for the competition and training roles, even though it does not have provisions for water ballast. [2]
The AC-6 is a 15 m (49.2 ft) wing span development of the 12.6 m (41.3 ft) span AC-5M, with longer, higher aspect ratio wings terminating in winglets. Like the AC-5, the AC-6 wing employs a Wortmann FX 60-157 airfoil. Assembly of the wing to the fuselage uses a cam pin and incorporates automatic hookups for the ailerons and air brakes. The landing gear is a retractable 360 mm (14.2 in) tire monowheel gear suspended with a pneumatic-hydraulic shock absorber. The wheel has a lever and cable operated drum brake. The cockpit can accommodate pilots up to 190 cm (74.8 in) in height. The canopy provides 300° field of view and is jettisonable. [1] [2]
A two-seat version was also proposed. [1]
Data from World Directory of Leisure Aviation 2003-04 and company [1] [2]
General characteristics
The Schempp-Hirth Janus is a high performance two-seat glider that was built by Schempp-Hirth GmbH. It was the first high-performance two-seater.
The Schempp-Hirth Nimbus-2 is an Open Class glider built by Schempp-Hirth during the 1970s. The Nimbus-2 first flew in April 1971 and a total of over 240 examples of all subtypes have been built until the beginning of the 1980s. It replaced the Schempp-Hirth Cirrus.
The Glaser-Dirks DG-400 is a single-seat self-launching motorglider that was produced by Glaser-Dirks between 1981 and 1992. It was the first self-launching motorglider with retractable engine and propeller to be produced in large numbers.
The ICA IS-29 was a sailplane built in Romania in the 1970s. The prefix IS comes from Iosif Șilimon, the Romanian IAR aeronautical engineer who designed it.
The VSO 10 Vosa is a Standard and Club-Class glider designed and manufactured in the Czechoslovak Republic from December 1978 as a replacement for the VT-116 Orlik II.
The ICA IS-32 is an open class high-performance metal two-seat sailplane produced in Romania in the 1970s. A refinement of the IS-28B, it shared most of that aircraft's fuselage, mated to new wings and empennage. This new wing had a span of 20 metres, featuring interconnected ailerons and flaps, Schempp-Hirth-type airbrakes. It had no provision for water ballast. The monowheel undercarriage differed from the IS-28 in being fully retractable.
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.
The Let L-33 Solo is a Czech shoulder-wing, single-seat, glider, designed by Marian Meciar and Vaclav Zajic, and produced by Let Kunovice. The L-33 first flew in 1992 and remained in production through 2012, supplied as a ready-to-fly aircraft.
The Scheibe SF 34 Delphin is a two-seat sailplane that was produced by Scheibe in Germany in the late 1970s and 1980s. Designed by Wolf Hoffmann and originally designated the SF H34, it was Scheibe's first unpowered aircraft of composite construction.
The Glasflügel 205 Club Libelle is a high wing, T-tailed, single seat glider that was designed and produced in West Germany by Glasflügel for club and rental use.
The Aviastroitel AC-4 Russia is a Russian mid-wing, single-seat glider designed by Vladimir Egorovich Fedorov and produced by Aircraft Cooperative Mechta, which became Aviastroitel, now Glider Air Craft.
The PZL Krosno KR-03 Puchatek is a Polish mid-wing, T-tailed, two-seats-in-tandem, glider that was designed by Jerzy Krawczyk and Eugeniusz Pelczar and produced by PZL Krosno, first flying in 1985.
The LAK-12 is a Lithuanian mid-wing, single-seat, FAI Open Class glider that was designed and produced by Lietuviškos Aviacinės Konstrukcijos (LAK) in Lithuania and later by Sportine Aviacija and Sport Aviation USSR.
The ProFe D-10 Tukan is a Czech high-wing, strut-braced, T-tailed, two-seat motor glider that was designed and produced by ProFe and made available in kit form for amateur construction.
The ProFe Banjo is a family of Czech high-wing, strut-braced, T-tailed gliders and motor gliders designed and produced by ProFe in kit form for amateur construction.
The TeST TST-3 Alpin T is a Czech shoulder-wing, T-tailed, single-seat glider and motor glider that was designed and produced by TeST of Brno.
The Aviastroitel AC-5M is a Russian mid-wing, single-seat, T-tailed motor glider and unmanned aerial vehicle that is produced by Aviastroitel, now Glider Air Craft.
The Aviastroitel AC-7M is a Russian mid-wing, T-tailed, two-seats in side-by-side configuration motor glider that was designed by Vladimir Egorovich Fedorov and produced by Aviastroitel, now Glider Air Craft.
The Aviastroitel AC-7 is a Russian mid-wing, T-tailed, two seats in side-by-side configuration, glider that was designed by Vladimir Egorovich Fedorov and produced by Aviastroitel, now Glider Air Craft. It first flew in 2007.
{{cite web}}: CS1 maint: year (link)