BMW 5 Series (E12) | |
---|---|
![]() | |
Overview | |
Production | 1972–1981 |
Model years | 1972–1981 |
Assembly |
|
Designer | Paul Bracq Marcello Gandini |
Body and chassis | |
Class | Executive car (E) |
Body style | 4-door sedan |
Layout | FR layout |
Related | BMW 6 Series (E24) |
Powertrain | |
Engine | Petrol : |
Dimensions | |
Wheelbase | 2,636 mm (103.8 in) |
Length |
|
Width | 1,690 mm (66.5 in) |
Height | 1,425 mm (56.1 in) |
Chronology | |
Predecessor | BMW New Class |
Successor | BMW 5 Series (E28) |
The BMW E12 is the first generation of 5 Series executive cars, which was produced from 1972 to 1981 and replaced the saloon models of the BMW New Class range.
Initial models were powered by inline-four engines, using either a carburettor or fuel-injection. A year after launch, the first model powered by a straight-six engine was introduced. By the final years of E12 production, most models used a straight-six engine.
There was no M5 model for the E12, however the E12 M535i is considered to be the predecessor to the M5. The E24 6 Series coupés were built on the E12 platform up until 1982. The E12 was replaced by the E28 5 Series in 1981, although the tools were sent to South Africa where E12 assembly continued (with E28 interiors) until 1984.
At the 1970 Geneva Motor Show, BMW unveiled the 2200ti Garmisch concept car, a 2-door saloon which was developed in conjunction with Bertone. [1] The 2200ti Garmisch concept car was shown as a potential replacement for the New Class saloons and the eventual E12 production model utilized many design elements from the Garmisch. [2]
Development of the E12-series had begun by the end of the 1960s, when wind tunnel tests were conducted. [3] Eberhard von Kuenheim, then chairman of BMW's supervisory board, hired French designer Paul Bracq in 1970 to work as the E12's Chief of design, [4] [5] [6] with Marcello Gandini of Bertone as co-designers of the exterior. [7] [8]
In 1971, a road-legal E12 prototype, which looked similar to a Fiat 132, was made. [9] Also in 1971, Paul Bracq had finalised the E12's design, however, compared with the later series production E12, Bracq's design car had a more stretched, and dynamic appearance. [10] Computers were used in BMW development for the first time to calculate front and rear crumple zones; the roof was designed with a rollover protection structure. [11] The body has a drag coefficient of 0.44. [12] BMW had previously located turn signal stalks on the right hand side of the steering wheels, and the E12 was their first model to have the stalk on the left side. [13] [14]
Before the E12 had been introduced, there were rumours that it would be available with both a 2.2 litre four-cylinder engine, and a small six-cylinder engine. [15] Instead, BMW carried over the 2-litre four-cylinder M10 engines from the New Class saloons, but modified the cylinder heads in order to improve combustion. [16] With the introduction of the E12-series in 1972, BMW offered two models, the carburetted 520, which had a Stromberg constant pressure carburettor, and the manifold injected 520i, which came with a Kugelfischer PL 04 injection pump. [15] A small six-cylinder model called "523" had been developed, but was never put into series production. [17] Eventually, the small six-cylinder model "520" was put into production in 1977, but in a 2-litre version rather than a 2.3 litre version. [12]
Originally, four-cylinder cars have a bonnet with a sunken central portion whereas on six-cylinder cars this section is raised. The leading edge of the bonnet was flat. After the August 1976 facelift all models featured the same bonnet, with a narrow raised central section reaching all the way forward and wrapping around the "kidneys". M30-engined cars can be identified by the grille having a chrome surround.
To meet Sweden's unique and stringent emissions standards, a fuel injected version of the 528 was developed and entered production in June 1977. Called the 528i, this was successful enough that it replaced the 528 in most markets. [18]
Model | Engine | Power | Torque | Years |
---|---|---|---|---|
518 | 1.8 L M10 straight-4 | 66 kW (90 PS) at 5,500 rpm | 143 N⋅m (105 lb⋅ft) at 3,500 rpm | 1974–1981 |
520 | 2.0 L M10 straight-4 | 85 kW (115 PS) at 5,800 rpm | 165 N⋅m (122 lb⋅ft) at 3,700 rpm | 1972–1977 |
520i | 2.0 L M10 straight-4 | 96 kW (130 PS) at 5,800 rpm | 178 N⋅m (131 lb⋅ft) at 4,500 rpm | 1972–1975 |
92 kW (125 PS) at 5,700 rpm | 172 N⋅m (127 lb⋅ft) at 4,350 rpm | 1975–1977 | ||
520/6 | 2.0 L M20 straight-6 | 90 kW (122 PS) at 6,000 rpm | 160 N⋅m (118 lb⋅ft) at 4,000 rpm | 1976–1981 |
525 | 2.5 L M30 straight-6 | 107 kW (145 PS) at 6,000 rpm | 211 N⋅m (156 lb⋅ft) at 3,700 rpm | 1973–1976 |
110 kW (150 PS) at 5,800 rpm | 208 N⋅m (153 lb⋅ft) at 4,000 rpm | 1976–1981 | ||
528 | 2.8 L M30 straight-6 | 121 kW (165 PS) at 5,800 rpm | 234 N⋅m (173 lb⋅ft) at 4,000 rpm | 1974–1976 |
125 kW (170 PS) at 5,800 rpm | 234 N⋅m (173 lb⋅ft) at 4,000 rpm | 1976–1978 | ||
528i | 2.8 L M30 straight-6 | 130 kW (177 PS) at 5,800 rpm [18] | 246 N⋅m (181 lb⋅ft) at 4,500 rpm | 1977–1981 (Sweden) |
129 kW (175 PS) at 5,800 rpm | 235 N⋅m (173 lb⋅ft) at 4,300 rpm | 1977–1978 (US only) | ||
126 kW (171 PS) at 5,600 rpm | 230 N⋅m (170 lb⋅ft) at 4,500 rpm | 1979–1981 (US only) | ||
135 kW (184 PS) at 5,800 rpm | 235 N⋅m (173 lb⋅ft) at 4,200 rpm | 1978–1981 | ||
530 | 3.0 L M30 straight-6 | 130 kW (177 PS) at 5,800 rpm | 250 N⋅m (184 lb⋅ft) at 3,500 rpm | 1975–1978 (South Africa only) |
530i | 131 kW (178 PS) at 5,500 rpm | 251 N⋅m (185 lb⋅ft) at 4,500 rpm | 1975–1978 (US only) | |
530 MLE | 147 kW (200 PS) at 5,800 rpm | 251 N⋅m (185 lb⋅ft) at 3,500 rpm | 1976 (South Africa only) | |
533i | 3.2 L M30 straight-6 | 147 kW (200 PS) at 5,500 rpm | 290 N⋅m (214 lb⋅ft) at 4,250 rpm | 1974–1979 [19] |
M535i | 3.5 L M90 straight-6 | 160 kW (218 PS) at 5,200 rpm | 310 N⋅m (229 lb⋅ft) at 4,000 rpm | 1980–1981 |
The data above are manufacturer claims. [20] Power and torque data is measured according to the German Standard DIN 70020.
The 518, 520 and 520i models were fitted with the 1.8 L and 2.0 L M10 inline-four engines, as per the previous New Class saloons. The 525, 528, 530, 530i and 533i models were fitted with M30 straight-six engines, as used in the New Six large saloons and E9 coupés. The 520, and 523 (the latter was developed, but never put into series production), use the M20 straight-six engine.
The 518 had its fuel supplied by a Solex 32/32 DIDTA carburetor, [21] [22] while the initial 520 model (powered by the M10 inline-four engine) used twin Stromberg 175CDET carburettors. [23] [24] The straight-six engine 525 and 528 models used dual Zenith INAT two-barrel carburettors up until the 1976 facelift. [25] [26] The straight-six 520 used a Solex 4A1 carburettor. [27]
Fuel-injected models have the letter i at the end of their model designation. The 520i used the Kugelfischer mechanical fuel injection system from the 2000tii and 2002tii until 1975. [28] From 1975, it was fitted with a mechanical continuous Bosch K-Jetronic port injection. [29] The 518i (only sold in Sweden and Japan), 528i, and 530i (only sold in the US and Japan) have a Bosch L-Jetronic port injection. [12]
The BMW E12 has a self-supporting body, a longitudinally mounted front engine, and rear-wheel drive. All four wheels are suspended independently. The front wheels have MacPherson struts with coil springs, hydraulic shock absorbers, and transverse control arms. The rear axle has semi-trailing arms with coil springs, and hydraulic shock absorbers. Models with a power output of 125 PS (92 kW) or more have an additional sway bar on the rear axle. All models except the M535i have 14-inch steel alloy wheels with a wheel-width of either 5.5 or 6 inches. Therefore, the tyre size is either 175 mm or 195 mm. All models use worm and sector steering, which is power assisted from the 528 onwards. The braking system is a dual-circuit system with front disc brakes; on the rear wheels, 518/520/i models were fitted with drum brakes, all models from the 525 onwards have disc brakes. [12]
The 4-speed manual transmission options consisted of: [30]
The 5-speed manual transmission options consisted of:
The automatic transmission options—all 3-speed transmissions—consisted of:
On the Belgian and Greek markets, there was a BMW 518 Deluxe version. One thousand of these cars were sold in 1979-1980. This was a BMW 518 equipped as the 528i top model with additional luxury items such as headrests on the back seats. It was rumored that this special version was produced for the Iranian government, as a car for top officials under the shah's rule. Due to the Iranian revolution these cars were never delivered. Instead, they have been sold as a special version in Belgium and Greece.
The Portuguese market also received nearly 700 CKD units due to the local regulations that demanded a certain amount of vehicles sold in Portugal to be locally assembled.
For the Swedish market the complete BMW 5 range was not offered, due to local emissions regulations. [31] For the early E12 the models BMW 518, BMW 520, BMW 520i, and BMW 525 were offered - with the BMW 528 missing. The series 2 range of was reduced to three models: BMW 518i, BMW 520i and BMW 528i. [18] The 528i became available as a result of Switzerland having adopted the same emissions rules, making it worthwhile to develop such a version. Unique to the Swedish market were a BMW 518i and a BMW 520i, fitted with the identical 2 litre engine, but the BMW 518i receiving poorer equipment. The BMW 520i was fitted with chromed wheel rings and a locking fuel cap. It was also fitted with head restraints in the rear, an armrest in the middle of the rear bench, steering wheel height adjustment, seat height adjustment for the drivers seat, a wooden shifter knob, and a rear heater. [18]
Beginning in 1974, BMW M (then called 'BMW Motorsport') offered the Motorsport 530, Motorsport 530i and Motorsport 533i as special order upgrades for the 525, 528 and 528i models. The Motorsport 530 used the carburetted 180 PS (132 kW; 178 hp) engine from the BMW 3.0S, [32] the Motorsport 530i [33] used the fuel-injected 200 PS (147 kW; 197 hp) engine from the BMW 3.0Si and the Motorsport 533i [34] used the injected 3.2-liter engine from the E24 633CSi. [35] Other modifications were a shorter differential ratio of (3.45:1 for the 530 and 3.25:1 for the 530i), [33] a 25% LSD, vented disc brakes, Bilstein shock absorbers, Scheel or Recaro sports seats, a sports steering wheel, alloy wheels on lower profile tyres, and optional front and rear spoilers. [35]
Later, the similar Motorsport 535i package was available for the 525i/528i model, consisting of the 3.5L engine from the E24 635CSi. [36]
The first M-badged 5 Series was the M535i, [37] which began production in 1980. The M535i is powered by the 3.5 L (214 cu in) M90 straight-six engine which produces 160 kW (215 bhp). The sole gearbox choice is a 5-speed manual and 1,650 M535i cars were produced (including 240 CKD for South Africa). [38] Features include optional front and rear spoilers, optional M-striping, sports suspension, Recaro sport seats, the steering wheel from the BMW M1, a dogleg close-ratio transmission, a limited-slip differential and larger brakes. [39] [40] [41]
The M535i is considered to be the predecessor to the BMW M5 model, which has been produced since the E28 generation. [42] [43]
The Alpina B7 Turbo and B7 S Turbo were based on the E12.
In South Africa, the 530 MLE was produced as a homologation special for racing, with 218 cars produced. [44] [45] The engine is a 3.0 L (183 cu in) M30, producing 132 kW (177 bhp). [46] Significant weight reduction measures were undertaken, included body panels made from aluminium or thinner steel. [47]
1974
1975
1976 facelift
With the introduction of the E23 7 Series, the E12 received a facelift in September 1976. The styling was overseen by Claus Luthe. [52] The rear-mounted gasoline filler door was relocated to the side of the car and the taillights were widened. The hood was redesigned to a give a 'power bulge' which accentuated the BMW kidney grille, and the dashboard ventilation was repositioned to improve air distribution.
As part of the facelift, the 520 model switched from the M10 inline-four engine to the BMW M20 straight-six engine, with the post-facelift 520 model often referred to as the 520/6. However, the M10 engine continued to be used in South Africa, due to local content laws. Even after the M20 entered local production in 1979, the 2.0-litre M10 continued to be available with "518" badges in South Africa. [53] In other markets the only inline-four M10 post-facelift model available was the 1.8-litre 518 which carried on as the base model until the end of production.
For the 525 and 528 models, the dual Zenith carburettors were replaced with a single Solex 4A1 DVG four-barrel, [54] [55] which increased power to 125 kW (170 PS; 168 hp) in the 528. [56] : 25
1978
1979
1980
Initially, the only model sold in the United States was the 530i, which was powered by a fuel-injected straight-six engine. Changes for American-market E12s include lower compression pistons, exhaust gas recirculation, an air pump and modified exhaust manifolds called Thermal Reactors. [58] The North American E12 models had larger bumpers (designed to withstand a 5 mph (8.0 km/h) collision without body damage), which increased the overall length by 206 mm (8.1 in).
For the 1979 model year, the 528i replaced the 530i. [59] To reduce emissions, the thermal reactor and air pump system were replaced with a 3-way catalytic converter and the car's Bosch L-jetronic fuel injection system was now fitted with an exhaust gas oxygen sensor. [60] [61] Power was reduced by 5 kW (7 bhp), and the presence of the catalytic converter meant that unleaded gasoline (petrol) was required. [58]
While being commended for its acceleration and build-quality, Modern Motor criticised the 1978 528i for unpredictable handling and excessive body roll. [62] [63] Steering corrections during cornering meant the car's body "lurches back annoyingly and messily", in part due to the soft springing and hard damping combination. In comparison to the Jaguar XJ6 and Peugeot 604, the car was viewed as narrow and cramped in the rear and prone to wind noise. [64]
Production of the E12 occurred from June 1972 to 1981, [65] with a total of 699,094 cars produced. [66] Initially, the cars were produced in Munich, Germany. Following the opening of the new BMW Group Plant Dingolfing in September 1973, production was phased over to the Dingolfing plant. [67]
Complete knock-down assembly of German-produced kits took place in Rosslyn, South Africa; [68] Jakarta, Indonesia (by Gaya Motor); [69] and Thailand.
The BMW E34 is the third generation of the BMW 5 Series, which was produced from November 2, 1987, until 1996. Initially launched as a sedan in January 1988, the E34 also saw a "Touring" station wagon (estate) body style added in September 1992, a first for the 5 Series. BMW replaced the E34 with the E39 5 Series in December 1995, although E34 Touring models remained in production until June 1996.
The BMW M30 is a SOHC straight-six petrol engine which was produced from 1968 to 1995. With a production run of 27 years, it is BMW's longest produced engine and was used in many car models.
The BMW M10 is a SOHC inline-4 petrol engine which was produced by BMW from 1962-1988. It was the company's first four-cylinder engine since the BMW 309 ended production in 1936 and was introduced in the New Class sedans.
The BMW M20 is a SOHC straight-six petrol engine which was produced from 1977 to 1993. It was introduced eight years after the larger BMW M30 straight-six engine, which remained in production alongside the M20.
The BMW M50 is a straight-6 DOHC petrol engine which was produced from 1990 to 1996. It was released in the E34 520i and 525i, to replace the M20 engine.
The BMW M88 is a straight-6 DOHC petrol engine which was produced from 1978 to 1989. It is based on the DOHC version of the BMW M49 engine, which was used in the BMW 3.0CSi racing cars.
The BMW E21 is the first generation of the BMW 3 Series, a range of compact executive cars. The E21 was produced from June 1975 to December 1983 and replaced the BMW 02 Series. The series was exclusively built in a two-door coupé body style. Contrary to its predecessor, a 'Touring' body with a sloped rear hatch was no longer offered.
The BMW E23 is the first generation of the BMW 7 Series luxury cars and was produced from 1977 until 1986. It was built in a 4-door sedan body style with 6-cylinder engines, to replace the BMW 'New Six' (E3) sedans. From 1983 until 1986, a turbocharged 6-cylinder engine was available.
The BMW E24 is the first generation of BMW 6 Series range of grand tourer cars, which was produced from January 1976 to 1989 and replaced the BMW E9 coupé.
The BMW E28 is the second generation of BMW 5 Series executive cars, which was produced from 1981 to 1988 and replaced the E12 5 Series. Pre-series production began in April 1981 and the car was introduced in the autumn that year.
The BMW E30 is the second generation of BMW 3 Series, which was produced from 1982 to 1994 and replaced the E21 3 Series. The model range included 2-door coupe and convertible body styles, as well as being the first 3 Series to be produced in 4-door sedan and wagon/estate body styles. It was powered by four-cylinder petrol, six-cylinder petrol and six-cylinder diesel engines, the latter a first for the 3 Series. The E30 325iX model was the first BMW to have all-wheel drive.
The BMW E39 is the fourth generation of the BMW 5 Series range of executive cars, which was manufactured from 1995 to 2004. It was launched in the sedan body style, with the station wagon body style introduced in 1996. The E39 was replaced by the E60 5 Series in 2003, however E39 Touring models remained in production until May 2004.
The fifth generation of the BMW 5 Series executive cars consists of the BMW E60 and BMW E61. The E60/E61 generation was produced by BMW from 2003 to 2010 and is often collectively referred to as the E60.
The second generation of the BMW 6 Series consists of the BMW E63 and BMW E64 grand tourers. The E63/E64 generation was produced by BMW from 2003 to 2010 and is often collectively referred to as the E63.
BMW M GmbH, formerly known as BMW Motorsport GmbH, is a subsidiary of BMW AG that manufactures performance cars.
The BMW New Six is a line of mid-size luxury sedans and grand tourer coupés produced by the German automaker BMW from 1968 to 1977. All models used the then-new M30 straight-6 engine. It marked BMW's return to the full-size luxury sedan market after a hiatus of 5 years and was introduced as a response to growing market segment dominated by Mercedes-Benz. It was important in establishing BMW's reputation as a maker of sporting luxury sedans.
The BMW N53 is a naturally aspirated straight-6 petrol engine which was produced from 2006 to 2013. The N53 replaced the BMW N52 in certain markets and debuted on the post-facelift E60 5 Series.
The BMW Z4 (E89) is the second generation of the BMW Z4 range of two-door roadsters, and was produced from 2009 to 2016. The E89 replaced the E85/E86 Z4 and is the fourth model in the BMW Z Series.
The sixth generation of the BMW 5 Series consists of the BMW F10, F18, BMW F11 and BMW F07 executive cars and were produced by BMW from January 2010 to 2017, with F10 being launched on 20 March 2010 to domestic market and F11 in the summer of 2010. The F07 Gran Turismo was produced from early September 2009 to 2017, being launched in the domestic German market in late October 2009.
{{citation}}
: CS1 maint: location missing publisher (link)Dimensionally, the 5 Series differed only slightly from its New Class predecessors, but Paul Bracq's modern, stylish four-door body was far less boxy in appearance.