BMW 5 Series (E28) | |
---|---|
![]() | |
Overview | |
Production | 1981–1988 |
Model years | 1982–1988 |
Assembly |
|
Designer | Claus Luthe |
Body and chassis | |
Class | Executive car (E) |
Body style | 4-door sedan |
Layout | FR layout |
Related | BMW 6 Series (E24) |
Powertrain | |
Engine | |
Dimensions | |
Wheelbase | 2,625 mm (103.3 in) |
Length | 4,620 mm (181.9 in) |
Width | 1,700 mm (66.9 in) |
Height | 1,415 mm (55.7 in) |
Chronology | |
Predecessor | BMW 5 Series (E12) |
Successor | BMW 5 Series (E34) |
The BMW E28 is the second generation of BMW 5 Series executive cars, [1] which was produced from 1981 to 1988 and replaced the E12 5 Series. Pre-series production began in April 1981 and the car was introduced in the autumn that year.
The E28 was initially produced with straight-four and straight-six petrol engines until 1983, when the 524td model became the first BMW car to be powered by a diesel engine. It was also the first 5 Series with the centre console angled towards the driver and to be available with anti-lock brakes (ABS). [2]
The first BMW M5 was produced during the E28 generation. It was powered by the M88/3 and S38 straight-six engines. The E24 6 Series coupés were built on the E28 platform from 1982 to 1989.
The E28 was replaced by the E34 5 Series in 1988.
The E28 has a self-supporting body that is welded to the body platform. The passenger cell is a safety passenger cell with deformation elements both in the front and rear of the vehicle. Unlike its E12 predecessor and E34 successor, the E28 has a rear-hinged bonnet. The boot has a volume of 460 L (122 US gal). Most models have a fuel tank capacity of 70 L (18 US gal), [3] with some models having a smaller tank of 63 litres (17 US gal). The kerb weight is 1,140–1,410 kg (2,513–3,109 lb). [4]
Cruise control, an on-board computer (to display trip information), and a "check control" panel (to alert the driver about fluid levels and lighting faults) were introduced to the 5 Series on the E28. The glazing is made of single-pane safety glass, the windscreen has laminated glass. [3] As part of developing the air-conditioning system for the E28, several of the BMW engineers in charge of this program drove a previous generation E12 5 Series during the middle of summer in Texas. The E12 528i was painted black with a black interior, and driven 500 mi (805 km) in one day. [5]
The styling was developed under BMW's chief designer Claus Luthe, [6] with development of the E28 beginning in 1975. [7] At the time that BMW was designing the E28, the company had only one computer, which was used for payroll management and spare parts logistics. Wolfgang Matschinsky and his team borrowed that computer to perform the calculations necessary to develop the new drivetrain and chassis. This was due to the fact that the addition of an ABS system necessitated a redesign from the previous model due to excessive vibrations under heavy braking. [8]
The E28 was the first 5 Series produced with diesel engines (the 524d and 524td models) and with a petrol engined model specifically aimed at increased fuel economy (525e/528e model).
The four models available at the launch of the E28 were the 518, 520i, 525i and 528i, [9] with the 518 using a straight-four petrol engine and the other three models using a straight-six petrol engine. Over the course of the E28 model, the following models were added: the 524d and 524td using diesel engines, the 518i (a fuel-injected version of the 518), the 525e/528e as fuel-economy models, and the upper-specification 533i, 535i, M535i, and M5 models.
A liquid petroleum gas (LPG) option was introduced for some petrol engines in 1984. [10]
Model | Engine | Power | Torque | Fuel supply | Years |
---|---|---|---|---|---|
518 | 1.8 L (1,766 cc) M10B18 I4 | 66 kW (90 PS) at 5500 rpm | 140 N⋅m (103 lb⋅ft) at 4000 rpm | Pierburg 2BE carburettor | 1981-1984 |
518i | 77 kW (105 PS) at 5800 rpm | 145 N⋅m (107 lb⋅ft) at 4500 rpm | L-Jetronic | 1981–1987 | |
520i | 2.0 L (1,991 cc) M20B20 I6 | 92 kW (125 PS) at 5800 rpm | 165 N⋅m (122 lb⋅ft) at 4500 rpm | K-Jetronic | 1981–1982 |
170 N⋅m (125 lb⋅ft) at 4000 rpm | L-Jetronic | 1982-1987 | |||
95 kW (129 PS) at 6000 rpm | 174 N⋅m (128 lb⋅ft) at 4000 rpm | LE-Jetronic | 1985-1988 | ||
164 N⋅m (121 lb⋅ft) at 4300 rpm | Motronic | 1986-1988 | |||
525i | 2.5 L (2,494 cc) M30B25 I6 | 110 kW (150 PS) at 5500 rpm | 215 N⋅m (159 lb⋅ft) at 4000 rpm | L-Jetronic | 1981–1987 |
525e, 528e | 2.7 L (2,693 cc) M20B27 I6 | 92 kW (125 PS) at 4250 rpm | 240 N⋅m (177 lb⋅ft) at 3250 rpm | Motronic | 1982–1987 |
90 kW (122 PS) at 4250 rpm | 230 N⋅m (170 lb⋅ft) at 3250 rpm | L-Jetronic, Motronic | 1982–1987 | ||
95 kW (129 PS) at 4250 rpm | 240 N⋅m (177 lb⋅ft) at 3250 rpm | Motronic | 1984–1988 | ||
88 kW (120 PS) at 4250 rpm | 240 N⋅m (177 lb⋅ft) at 3250 rpm | Motronic | 1985–1987 | ||
528i | 2.8 L (2,788 cc) M30 I6 | 135 kW (184 PS) at 5800 rpm | 240 N⋅m (177 lb⋅ft) at 4200 rpm | L-Jetronic | 1981–1987 |
533i | 3.2 L (3,210 cc) M30 I6 | 135 kW (184 PS) at 6000 rpm [11] | 265 N⋅m (195 lb⋅ft) at 4000 rpm | Motronic | 1982–1984 |
535i, M535i | 3.4 L (3,430 cc) M30 I6 | 160 kW (218 PS) at 5500 rpm | 310 N⋅m (229 lb⋅ft) at 4000 rpm | Motronic | 1985–1988 |
136 kW (182 hp) at 5400 rpm | 290 N⋅m (214 lb⋅ft) at 4000 rpm | Motronic | 1985–1988 (US) | ||
M5 | 3.5 L (3,453 cc) M88/3 I6 | 210 kW (286 PS) at 6500 rpm [12] [13] | 340 N⋅m (251 lb⋅ft) at 4500 rpm | Motronic | 1985–1988 |
3.5 L (3,453 cc) S38 I6 | 191 kW (256 hp) at 6500 rpm [14] [15] | 330 N⋅m (243 lb⋅ft) at 4500 rpm | Motronic | 1986–1988 (US) |
518: Sold only in some European markets where it suited local tax categories, the 518 was the lowest specification model which used a four-cylinder engine with a carburetor. Factory performance figures for the manual transmission cars are a top speed of 164 km/h (102 mph) and 0–100 km/h acceleration in 14.0 seconds. [16]
518i: The base model in Japan and some European countries, the 518i used a fuel-injected four-cylinder engine. Factory performance figures for the manual transmission cars are a top speed of 175 km/h (109 mph) and 0–100 km/h acceleration in 12.6 seconds. [3] This version was not sold in Germany until the 1984 facelift, when it replaced the carburetted 518.
520i: A mid-range model with the smallest of the available six-cylinder engines. Factory performance figures for the manual transmission cars are a top speed of 190 km/h (118 mph) and 0–100 km/h acceleration in 11.4 seconds. [3]
525e / 528e: The 525e (called 528e in North America and Japan) uses a longer stroke 2.7-litre version of the 6-cylinder M20 petrol engine, is optimised for fuel economy and torque at low engine speed rather than the traditional high revving characteristics of BMW straight-six engines. [17] The "e" stands for the Greek letter eta, for economy. According to BMW, the 525e is more fuel efficient than the 520i, which has the same rated power of 92 kW. [18] Since many markets tax cars based on engine displacement, the eta's larger engine meant that it was not suitable everywhere. The model was expressly developed with the American market in mind. BMW's corporate average fuel economy was at risk of not meeting requirements by 1984, primarily due to higher sales of their bigger, more expensive cars in the early 1980s. [19] In Austria, the 525e was detuned to 88 kW (118 hp).
Factory performance figures for the manual transmission cars without a catalytic converter are a top speed of 190 km/h (118 mph) and 0–100 km/h acceleration in 10.7 seconds. With a catalytic converter, the figures are a top speed of 188 km/h (117 mph) and 0–100 km/h acceleration in 11.3 seconds [3]
525i: This mid-range model is powered by a 2.5-litre 6-cylinder engine. The 525i was only sold in Europe. Factory performance figures for the manual transmission cars are a top speed of 201 km/h (125 mph) and 0–100 km/h acceleration in 9.8 seconds. [3]
528i: Initially the highest specification available, the 6-cylinder 528i became a mid-range model following the release of the 533i and 535i models. Factory performance figures for the manual transmission cars are a top speed of 215 km/h (134 mph) and 0–100 km/h acceleration in 8.4 seconds. [3]
533i: Only sold in Japan and North America, [20] [21] the 6-cylinder 533i was the highest specification model during its production years of 1983–1984. It was replaced by the 535i.
535i/is: Released in 1984, the 535i replaced the 533i and uses the same 6-cylinder drivetrain as the M535i. In the US there was also a 535is model, which included sport seats and spoilers at the front and rear. Factory performance figures for the manual transmission cars without a catalytic converter are a top speed of 225 km/h (140 mph) and 0–100 km/h acceleration in 7.2 seconds. With a catalytic converter, the figures are a top speed of 212 km/h (132 mph) and 0–100 km/h acceleration in 7.9 seconds [3]
M535i: The top of the regular production model range, the M535i uses the drivetrain from the 535i plus M-Technic suspension, and wheels and body panels not found on any other E28. The M535i was assembled on the standard E28 assembly lines in Dingolfing and Rosslyn. Factory performance figures for the manual transmission cars without a catalytic converter are a top speed of 230 km/h (143 mph) and 0–100 km/h acceleration in 7.2 seconds. With a catalytic converter, the figures are a top speed of 217 km/h (135 mph) and 0–100 km/h acceleration in 7.9 seconds [3]
Model | Engine | Power | Torque | Aspiration | Years |
---|---|---|---|---|---|
524d | 2.4 L M21 straight-6 | 63 kW (86 PS) at 4600 rpm | 152 N⋅m (112 lb⋅ft) at 2500 rpm | naturally aspirated | 1985–1987 |
524td | 85 kW (115 PS) at 4800 rpm | 210 N⋅m (155 lb⋅ft) at 2400 rpm | turbocharged | 1983–1988 |
524d: At the 1986 Geneva Motor Show, four years after the introduction of the more powerful 524td model, the naturally-aspirated 524d model was introduced. [22] : 188, 190 It was only sold in some markets. [22] : 191
524td: This turbodiesel model was the first diesel car produced by BMW. It entered production in late 1982, when 100 pre-series cars were built. [23] Factory performance figures for the manual transmission cars are a top speed of 180 km/h (112 mph) and 0–100 km/h acceleration in 12.9 seconds. [3]
BMW offered the E28 with both manual and automatic gearboxes. The torque is transmitted from the engine with a single-disc dry clutch with a torsional damper in the models with a manual gearbox, the automatic models have a torque converter with built in lockup-clutch. [3]
The 5-speed manual transmissions are: [24]
The 5-speed manual transmissions are:
The 3-speed automatic transmissions are:
The 4-speed automatic transmissions are:
Independent front and rear suspension is used, with Macpherson struts at the front and a semi-trailing arm design for the rear. [3]
The front suspension was upgraded to use dual links at the bottom of the strut, as first seen on the E23 7 Series. This increases steering offset while cornering, to improve steering feel. [25] : 106 Double-acting shock absorbers, coil springs and a front anti-roll bar are used.
The rear suspension is mounted on a delta beam that is connected to the body with three screws in rubber bearings, that have longitudinal play.[ citation needed ] Some models have a rear anti-roll bar. [3]
The steering on most models is a speed-dependent recirculating ball power steering system made by ZF Friedrichshafen. The 518i has a Gemmer steering system with a double enveloping worm gear, also made by ZF. [3]
Wheel sizes are 14-inch (16-inch for the M5 model) or 390 mm Michelin TRX. [26] : 44 [27] [28] All rims have 22 mm positive rim offset. [3]
The brakes use a hydraulic dual-circuit brake system with power assistance. The front wheels have disc brakes, that are – except for the 518i – internally ventilated. All models with 2.5 L or more displacement have rear disc brakes (non-vented), while the lesser powered models have rear drum brakes. To prevent the wheels from locking, BMW equipped the E28 after 1984 with an anti-lock braking system, although it was an option in some markets. [3]
The E28 was the first M5 model produced, and is powered by the M88/3 and S38 straight-six engines.
The North American line-up consisted of the 528e (1982–1988, known as the 525e in Europe), 533i (1983–1984), 535i (1985–1988), 524td (1985–1986), M5 (1986–1987) and 535is (1987–1988).
The launch model was the 528e in 1982, followed by the 533i. [29] The optional automatic transmission was initially a 3-speed (a 4-speed automatic was available in Europe at the time), with a 4-speed automatic transmission becoming optional in 1983. From 1985, all North American models had ABS Brakes as standard.
The North American E28 models had larger bumpers (designed to withstand a 5 mph (8.0 km/h) collision without body damage), which increased the overall length by 180 mm (7.1 in).[ citation needed ]
The 528i, 533i and 535i were sold with a catalytic converter in the United States.
Instead of importing the M535i, BMW of North America created the 535is. [30] This model is based on a 535i, plus front and rear spoilers, sport suspension and sport seats.
Production of North American market M5 models began in late 1986 (two years after M5 production began for European markets), and it was only produced for twelve months as 1988 model year car. [31] North American M5 models use the S38 engine instead of the M88/3. [32] : 37 All North American M5 cars were painted Jet Black and most interiors were tan ("Natur") coloured leather. [33]
E28 production started in July 1981 and ended in December 1987. [34] A total of 722,328 cars were built. [35]
The E28 was still sold in North America as a 1988 Model Year car after its E34 successor had been released in Europe in early 1988. A limited edition model was also sold in South Africa from mid-1987 to the end of 1988. [36]
The BMW 5 Series is an executive car built and sold by BMW since 1972 and is currently in its eighth generation. The car is sold as either a sedan or, since 1991, a station wagon. A 5-door fastback was sold between 2009 and 2017. Each successive generation has been given an internal G-code designation since 2017. Previously, a F-code designation was used between 2016 and 2010 while an E-code designation was used between 2010 and 1972. These are used to distinguish each model and generation from each other.
The BMW E34 is the third generation of the BMW 5 Series, which was produced from November 2, 1987, until 1996. Initially launched as a sedan in January 1988, the E34 also saw a "Touring" station wagon (estate) body style added in September 1992, a first for the 5 Series. BMW replaced the E34 with the E39 5 Series in December 1995, although E34 Touring models remained in production until June 1996.
The BMW M30 is a SOHC straight-six petrol engine which was produced from 1968 to 1995. With a production run of 27 years, it is BMW's longest produced engine and was used in many car models.
The BMW M20 is a SOHC straight-six petrol engine which was produced from 1977 to 1993. It was introduced eight years after the larger BMW M30 straight-six engine, which remained in production alongside the M20.
The BMW M88 is a straight-6 DOHC petrol engine which was produced from 1978 to 1989. It is based on the DOHC version of the BMW M49 engine, which was used in the BMW 3.0CSi racing cars.
The BMW E12 is the first generation of 5 Series executive cars, which was produced from 1972 to 1981 and replaced the saloon models of the BMW New Class range.
The BMW E21 is the first generation of the BMW 3 Series, a range of compact executive cars. The E21 was produced from June 1975 to December 1983 and replaced the BMW 02 Series. The series was exclusively built in a two-door coupé body style. Contrary to its predecessor, a 'Touring' body with a sloped rear hatch was no longer offered.
The BMW E23 is the first generation of the BMW 7 Series luxury cars and was produced from 1977 until 1986. It was built in a 4-door sedan body style with 6-cylinder engines, to replace the BMW 'New Six' (E3) sedans. From 1983 until 1986, a turbocharged 6-cylinder engine was available.
The BMW E39 is the fourth generation of the BMW 5 Series range of executive cars, which was manufactured from 1995 to 2004. It was launched in the sedan body style, with the station wagon body style introduced in 1996. The E39 was replaced by the E60 5 Series in 2003, however E39 Touring models remained in production until May 2004.
The fifth generation of the BMW 5 Series executive cars consists of the BMW E60 and BMW E61. The E60/E61 generation was produced by BMW from 2003 to 2010 and is often collectively referred to as the E60.
The BMW M3 is a high-performance version of the BMW 3 Series, developed by BMW's in-house motorsport division, BMW M GmbH. M3 models have been produced for every generation of 3 Series since the E30 M3 was introduced in 1986.
The BMW M6 is a high-performance version of the 6 Series marketed under the BMW M sub-brand from 1983 to 2018.
BMW M GmbH, formerly known as BMW Motorsport GmbH, is a subsidiary of BMW AG that manufactures performance cars.
The BMW M5 is a high-performance variant of the BMW 5 Series marketed under the BMW M sub-brand. It is considered an iconic vehicle in the sports sedan category. The M5 has always been produced in the sedan (saloon) body style, but in some countries the M5 has also been available as a wagon (estate) from 1992 to 1995, from 2006 to 2010, and since 2024.
Alpina Burkard Bovensiepen GmbH & Co. KG is an automobile manufacturing company based in Buchloe, in the Ostallgäu district of Bavaria, Germany that develops and sells high-performance versions of BMW cars. Alpina works closely with BMW and their processes are integrated into BMW's production lines, and is recognized by the German Ministry of Transport as an automobile manufacturer, in contrast to other performance specialists, which are aftermarket tuners. The Alpina B7 is produced at the same assembly line in Dingolfing, Germany, as BMW's own 7 Series. The B7's twin-turbo 4.4-litre V8 is assembled by hand at Alpina's facility in Buchloe, Germany, before being shipped to BMW for installation, and the assembled vehicle is then sent back to Alpina for finishing touches.
The 4HP is a four-speed Automatic transmission family with a hydrodynamic Torque converter with an electronic hydraulic control for passenger cars from ZF Friedrichshafen AG. In selector level position "P", the output is locked mechanically. The Simpson planetary gearset types were first introduced in 1980, the Ravigneaux planetary gearset types in 1984 and produced through 2003 in different versions and were used in a large number of vehicles.
The BMW M8 is the high-performance version of the BMW 8 Series (G15) marketed under the BMW M sub-brand.
The sixth generation of the BMW 5 Series consists of the BMW F10, F18, BMW F11 and BMW F07 executive cars and were produced by BMW from January 2010 to 2017, with F10 being launched on 20 March 2010 to domestic market and F11 in the summer of 2010. The F07 Gran Turismo was produced from early September 2009 to 2017, being launched in the domestic German market in late October 2009.
The Alpina B10 Bi-Turbo is a high performance version of the BMW 5 Series E34 executive car manufactured by German automobile manufacturer Alpina. Beginning production in 1989, the B10 Bi-Turbo was based on the 535i and received several upgrades by Alpina, being the fastest production sedan in the world at the time of its introduction. Production ended in 1994 with 507 examples produced.
The Alpina B12 is a name given to high-performance luxury automobiles manufactured by German automobile manufacturer Alpina. The B12 originally succeeded the B11 4.0 in 1988 which was based on the BMW 7 Series (E32) and was also based on the same car. Subsequent models were based on the BMW 7 Series (E38) and the BMW 8 Series (E31). Production ended in 2001 when the 7 Series (E38) models were discontinued. The B12 was replaced by the B7 (E65) and the B6 (E63).