Baade 152 | |
---|---|
General information | |
Type | Airliner |
Manufacturer | VEB Flugzeugwerke Dresden |
Status | Development terminated, never entered service |
Primary user | Deutsche Lufthansa (Intended) |
Number built | 2 flight prototypes + 1 completed that never flew. Several abandoned while under construction. |
History | |
First flight | 4 December 1958 |
Retired | 1961 |
Developed from | OKB-1 150 |
The Baade 152 also known as Dresden 152, VL-DDR 152 or simply 152, was a post-war airliner designed and manufactured by East German aircraft company VEB Flugzeugwerke Dresden. The aircraft was named after German aeronautical engineer Brunolf Baade, the principal designer involved in the programme. It had the distinction of being the first jet airliner to be developed in Germany.
The Baade 152 represents the final development in the Junkers aircraft family which ended with the "development planes" (Entwicklungsflugzeug – EF). Its development drew upon the OKB-1 150, an aborted bomber that was developed in the Soviet Union with assistance from captured German scientists. The Baade 152's basic configuration shares many similarities, including shape, size, wing-area, landing gear configuration, empty weight, range, altitude, speed, power per engine, and double-engine cowling arrangement similar to the American-built Boeing B-47 Stratojet, a bomber/aerial reconnaissance aircraft which entered service with the United States Air Force during 1951. Work on the Baade 152 formally commenced during 1955.
On 4 December 1958, the maiden flight of the first prototype V1/I (DM-ZYA) took place. A total of three Baade 152s would be manufactured, two of which would participate in a test flight programme based out of Dresden Airport between 1956 and 1961. On 4 March 1959, the first prototype was lost in an accident, killing all crew on board; the cause is unclear. Testing continued using the second prototype. At one stage, there were reports that around 20 aircraft were in various stages of production on behalf of the East German state airline Deutsche Lufthansa. However, all flight tests of the Baade 152 were abandoned after a fuel supply problem was uncovered. The type failed to enter service, and production was terminated without any follow-on being produced.
Following the end of the Second World War in Europe, Germany was divided into West Germany and East Germany. In the East, the Soviet Union became politically dominant over the region; Soviet officials sought to obtain all possible aerospace-related material in East Germany, the engineers and scientists associated with such projects were deported to the Soviet Union. [1] During October 1946, it was announced that all East German aerospace-related projects would be transferred to the Soviet Union, while material that could not be transferred was deliberately destroyed. Following the formation of German Democratic Republic during 1949, many of the deported German scientists were allowed to return to East Germany and to practice their professions once more. [2]
During 1952, new aeronautical facilities were established in East Germany; initially, these were operated with a focus upon military aircraft, however, following a popular uprising in the following year, military ambitions were renounced in favour of civil aircraft. [1] The revival of the East German aerospace industry had occurred at a faster rate than that of neighbouring West Germany. [3] Development of what would become known as the Baade 152 can be traced back as early as 1953 to a team of German aeronautical engineers headed by Brunolf Baade, for whom the type is named after, working in Zavyalovo, Russia. However, when members of the team were allowed to return to East Germany, all documentation relating to the 152 had to be left behind; the Soviets retained this cache and eventually released it to East Germany after a protracted period. [4]
Based in East Germany, a new aerospace company, VEB Flugzeugwerke Dresden, was able to recruit Baade and several other returning engineers, and decided to commit itself to completing development of the envisaged 152. [2] [5] VEB planned to develop the 152 as a four-engined commercial transport aircraft; an assembly line capable of producing up to 18 aircraft per year was to be established in Dresden to manufacture the type. As intended, the 152 would have been developed initially as a 57-seater airliner, plans were made to accommodate alternative seating layouts, such as a high-capacity 72-passenger configuration or a more spacious 42-passenger arrangement. [5]
During 1955, VEB formally commenced work on the 152, having to effectively redesign the aircraft in the process. [4] During the previous year, work had also commenced at Berlin-based Industriewerke Ludwigsfelde (IWL) on the development of the Pirna 014 turbojet engine; it was this powerplant that would be selected for the 152. [6] According to Baade, work was hindered by a lack of optimal facilities present in East Germany. According to aviation periodical Flight International, East Germany was keen to involve Western industry in the project as well, particularly in the provision of components and materials; it was also hoped the sales of the 152 could be garnered from the west as well. [5] Reportedly, East German officials regarded the 152 as filling a relatively unique niche upon the global airliner market, and that its nearest competitor was the French-built Sud Aviation Caravelle. [5]
A total of three airworthy prototypes were constructed; two of them being flown on three flights. The design of the first prototype was largely derived from the OKB-1 150, an early jet bomber designed by former Junkers engineers in the Soviet Union. It included a tandem landing gear and glazed nose for the navigator, which was a common feature in many Eastern Bloc aircraft. The 152's landing gear was unusual for a passenger plane in that the main gear was housed along the centerline of the fuselage with outrigger wheels in the wing-tips, similar to the better-known Boeing B-47. [5] The tail of the airplane was tested on a VEB 14.[ citation needed ]
On 4 December 1958, the maiden flight of the first prototype V1/I (DM-ZYA) took place, which lasted for 35 minutes. [1] Tragedy struck during its second flight: the aircraft being lost in a crash at Ottendorf-Okrilla on 4 March 1959, killing the entire crew. It is believed that the pilots, having lacked experience with operating jet-propelled aircraft, may have been unfamiliar with the slow response time of such engines, contributing to a stall and subsequent crash. [4] The reasons for the crash were never fully investigated and the results of the limited investigation were only made public in 1990. [7] The loss has been attributed as having been a major setback to the programme and later having played a factor in its termination. [4]
Following the accident, test flights continued using the second prototype V4/II (DM-ZYB), although this aircraft did not fly until 1960. [1] It would be the first to be powered by the indigenously-developed Pirna 014 turbojet engine. [4] Other changes made on the second prototype included a different landing gear configuration, involving an unusual configuration of the main landing gear that shared the same pylon as the engines, [5] as well as the glazed nose for the navigator being dispensed with. The third prototype, V5/II (DM-ZYC), would never be flown, being solely used for ground-based testing. [8]
The flight test programme was abruptly terminated after conducting only three flights; reportedly, a serious malfunction involving the fuel tanks, which interrupted sufficient fuel supply during a steep descent, had been discovered. The question of whether this design flaw had contributed to the crash of the first prototype remains unanswered. There were still about 20 aircraft in production for the East German state airline Deutsche Lufthansa until mid-1961. On 28 February 1961, the East German government issued an order for the dissolution of its national aeronautical industry; this decision was reportedly heavily influenced by the Soviet Union, which was then promoting its own similar-sized airliner, the Tupolev Tu-124; despite earlier promises, it no longer wanted to purchase any Baade 152s or provide further support towards its development. Similar curtailing of autonomous aviation-related programmes was carried out throughout the Eastern Bloc during this period. [9]
All examples of the aircraft were scrapped. However, during 1995, a restoration effort involving the abandoned 152/II #011 fuselage was initiated at EADS EFW (Elbe Flugzeugwerke GmbH) in Dresden, which is the direct successor company of VEB Flugzeugwerke Dresden. Furthermore, one consequence of the project's cancellation was that engine manufacturer Industriewerke Ludwigsfelde (IWL) was left with 30 completed Pirna 014 powerplants without any customer for them. [10] These surplus engines were subsequently used to power a number of minesweepers operated by the Volksmarine . [10]
Data from 152 Homepage [11]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Junkers Ju 287 was a multi-engine tactical jet bomber built in Nazi Germany in 1944. It featured a novel forward-swept wing, and the first two prototypes were among the very few jet propelled aircraft ever built with fixed landing gear.
The OKB-1 '140', was a jet bomber produced in the USSR from 1947.
The Messerschmitt Me 328 was a prototype pulsejet-powered fighter aircraft designed and produced by the German aircraft manufacturer Messerschmitt AG.
Dresden Airport is the international airport of Dresden, the state capital of Saxony, Germany. It is located in Klotzsche, a district of Dresden 9 km (5.6 mi) north of the city centre. It was formerly also known in German as Flughafen Dresden-Klotzsche. Destinations from the airport include a few European cities and several holiday destinations.
The Ilyushin Il-14 is a Soviet twin-engine commercial and military personnel and cargo transport aircraft that first flew in 1950, and entered service in 1954. The Il-14 was also manufactured in East Germany by VEB Flugzeugwerke as the VEB 14 and in Czechoslovakia as the Avia 14. The Ilyushin Il-14 was typically replaced by the Antonov An-24 and Yakovlev Yak-40.
A supercritical aerofoil is an airfoil designed primarily to delay the onset of wave drag in the transonic speed range.
Ignaz "Igo" Etrich was an Austrian flight pioneer, pilot and fixed-wing aircraft developer.
The VFW-Fokker 614 was a twin-engined jetliner designed and constructed by joint Dutch and West German aviation company VFW-Fokker. It is the first jet-powered passenger liner to be developed and produced in West Germany, as well as the first German-built civil aircraft to have been manufactured for a decade.
The EWR VJ 101 was an experimental West German jet fighter vertical takeoff/landing (VTOL) tiltjet aircraft. VJ stood for Versuchsjäger,. The 101 was one of the first V/STOL designs to have the potential for eventual Mach 2 flight.
The Dornier Do 31 is an experimental, jet-propelled, vertical take-off and landing (VTOL) cargo aircraft that was designed and produced by West German aircraft manufacturer Dornier.
The VFW VAK 191B was an experimental German vertical take-off and landing (VTOL) strike fighter of the early 1970s. VAK was the abbreviation for Vertikalstartendes Aufklärungs- und Kampfflugzeug. Designed and built by the Vereinigte Flugtechnische Werke (VFW), it was developed with the purpose of eventually serving as a replacement for the Italian Fiat G.91 then in service with the German Air Force. Operationally, it was intended to have been armed with nuclear weapons as a deterrent against aggression from the Soviet Union and, in the event of a major war breaking out, to survive the first wave of attacks by deploying to dispersed locations, rather than conventional airfields, and to retaliate against targets behind enemy lines.
Mastermodell GmbH was a plastic model and toy manufacturer established in 1958 in Zschopau, East Germany.
The Dornier Do 27 is a German single-engine STOL utility aircraft that was designed and manufactured by Dornier GmbH. It was notable for being the first mass-produced aircraft in Germany following the end of the Second World War.
The Hispano HA-200 Saeta is a twin-seat jet advanced trainer designed and produced by Spanish aircraft manufacturer Hispano Aviación. It has the distinction of being the first Spanish aircraft to harness jet propulsion.
Elbe Flugzeugwerke GmbH is an aerospace manufacturer based in Dresden, Germany.
A tiltjet is an aircraft propulsion configuration that was historically tested for proposed vertical take-off and landing (VTOL)-capable fighters.
The OKB-1 150 was a jet bomber designed and produced in the Soviet Union from 1948.
The Doblhoff/WNF 342 was an early experimental tip jet helicopter designed and produced by Wiener-Neustädter Flugzeugwerke. It was the first helicopter to take off and land using tip jets to drive the rotor.
The Pirna 014 was an axial turbojet designed in East Germany in the mid- to late 1950s by former Junkers engineers, who were repatriated to East Germany in 1954 after being held in custody in the Soviet Union following World War II.
Brunolf Baade was a German aeronautical engineer. He led the team that developed the Baade 152.