![]() | |
Type | Joint-stock company |
---|---|
Industry | Steel cutlery manufacture |
Predecessor | Binns & Mason Pittsburgh Cutlery Company |
Founded | 1866 |
Founder | Edward Binns Samuel Mason |
Defunct | 1886 |
Headquarters | , United States |
Area served | International trade |
Products | Steel cutlery, razors, pocket knives |
Owners | E. Binns and S. Mason 1866–1867 Harmony Society 1867–1886 |
Number of employees | 300 |
Beaver Falls Cutlery Company, Beaver Falls, Pennsylvania, is a former company which manufactured steel cutlery, razors and pocketknives. The company was founded as Binns & Mason in 1866 by skilled cutlers from Sheffield, West Riding of Yorkshire, England, as a small enterprise making pocketknives in Rochester, Pennsylvania, then it briefly became The Pittsburgh Cutlery Company. It was purchased in 1867 by the Harmony Society, brought to Beaver Falls, and developed for mass production, to employ 300 people and to cover a two-acre site. In 1872 it suffered a labor dispute which was resolved by the employment of up to 225 Chinese workers. In 1876 it produced the "largest knife and fork in the world," of its time, [1] for display at the Centennial Exposition. The company closed in 1886.
The company was founded in 1866 as Binns & Mason, by Edward Binns and Samuel Mason, for the manufacture of pocket knives in nearby Rochester. [1] Mason, inventor of an improved tang for iron-handled knives, patent 89059, was originally from Sheffield, South Yorkshire, England, a steel town. [2] Mason brought steel workers from his home town of Sheffield to start up the company. [3] The Beaver Falls Courier (1875–1879) [4] confirmed that in 1866 Binns and Mason established the company, whose capital, it said, was then a million dollars. It continued: "A few years ago the spot which is now occupied by the town was a barren and desolated tract of land. The upper part was a forest, within whose rocky barriers scarcely a house was seen." Of the company's symbol at the factory it said: [5]
"The trade mark of the company is one of the finest pieces of carving in wood we have seen, yet it is only typical of the trades of the Company. There is represented the American eagle flapping its wings in triumph over the British lion, and the latter is struggling in the last agonies of death. So the English manufacturers of cutlery have been supplanted in their trade by American establishments ... Then in addition to the trade in Europe the trade in this country is very great. The works are continually pressed for orders." [5]
Samuel Mason, one of the founders of the company, was born in Sheffield, West Yorkshire, England, around 1812. His wife was Jane Mason (b.ca.1820), and they had two sons born in England. The second son was Henry (b.ca.1842). [6] On 30 March 1844 Mason left for America with his family, arriving in New York "pennyless (sic) and friendless" after a journey of 105 days. He remained in America for 31 years, becoming an American citizen in 1860, [7] and returning to Sheffield in 1875. [8] His first American employment in 1844 was with William Wild who had previously manufactured cutlery in Sheffield. In November of that year he obtained work with a cutlery manufacturer in Connecticut. He does not say where he was working between 1844 and 1866, but his highly-detailed description of the mass production at Lamson and Goodnow's Cutlery works at Shelburne Falls, founded by Lamson in 1844, implies personal experience of the place. [8] Mason and his wife had two more sons in Massachusetts: William (b.ca.1844) and Joseph (b.ca.1846), so it is possible that Mason was recruited to Lamson and Goodnow when the company was founded. [6]
Mason was director of Binns & Mason for three years between 1866 and 1869. [5] When he and Binns started the company, recruitment of skilled workers from their home town of Sheffield was facilitated by the Sheffield Outrages. That was the term for the strife between cutlers and management due to cramped and dangerous conditions. It also described the murder of some non-union workers in 1854 from which worker unrest escalated into the blowing up of houses with gunpowder in 1866. [9] Following Harmony's takeover, Mason continued at Beaver Falls Cutlery Company as superintendent of cutlery. In 1870, his three younger sons Henry, William and Joseph were also working at the plant as foreman, machinist and worker respectively. In that year his personal estate was valued at $5,000. [6]
Mason was against slavery, and said on the subject: "I gave my first son, who for four years combated the enemy on the battlefield. I am not sorry for the act." [nb 1] [7] In 1875 he returned to Sheffield where he lived at 120 Westbar, and by 1876 was regularly writing letters to English newspapers on the subject of cutlery manufacture in America, and on the virtues of trade protectionism by America. [5] In 1875 Mason became a boot and shoe dealer, running the American Shoe Store at 120 Westbar, Sheffield. [10] On 11 June 1879 he filed a petition for bankruptcy, having liabilities of £800. [11] His date of death is unknown, however there was a meeting of his creditors on 1 July 1879, declaring his debts of £537 14s 6d, and assets of £91 11s. [12]
By 13 October 1866, Binns & Mason was a chartered company. It lacked capital and needed investors from Pittsburgh, so it consequently became the Pittsburgh Cutlery Company. The investment was insufficient, [13] so the Pittsburgh Cutlery Company was merged with the Harmony Society's new firm, which was based at Ambridge. The Harmony Society had already bought the town of Beaver Falls in 1849. [9] At this point, Henry Reeves became president while Samuel Mason was still director, and John Reeves was secretary and treasurer. [1] In April 1867 the knife-making business was moved to a two-acre site at Beaver Falls, PA, in "the lower end of town, near the river," [13] where 300 people were eventually employed (following another recruitment drive in Sheffield, England) [9] making it one of the largest companies of its day. [1] [13] It was later called the "cutlery property," because Harmony expanded it to make table cutlery besides other knives. The factory complex was founded in 1868 between Second Street and Third Street, off Seventh Avenue. [nb 2] By early 1868 the firm's name was Beaver Falls Cutlery Company. [1] [2]
The organisers of the 1867 expansion were Pittsburgh men: Dr C.G. Hussey, General Thomas M. Howe and James W. Brown. [nb 3] [1] The majority of shares were purchased by the Harmony Society, and it became a joint-stock company with a capital stock of $400,000 in 1870, under the leadership of John Reeves. The Harmony Society had been successful manufacturers, but their numbers had declined, and they were becoming business investors instead. "At its peak (the works) employed 300 workers who turned out 1200 dozen finished products per day." [1] [3] [14] In 1876, Samuel Mason described the company: "The ... Company when in full blast run three turbine water wheels of 82-horse power each, and one engine 125-horse power, so you may calculate the amount of cutlery turned out by this firm." He mentions that America was making steel cutlery while Sheffield was still using iron. [8]
In 1872 the company was stable and Harmony was making a profit. At this point the largely English skilled workforce took the opportunity to initiate a labor dispute and strike for higher wages. [1] The director John Reeves refused the demand. [1] Instead he closed the factory, [13] then he gave a five-year contract to 225 Chinese workers gradually brought in from California and New Orleans. [1] [14] With them was Madam Chow, the wife of Chow Hung and the only Chinese woman at Beaver Falls at that time. The Beaver County Times has suggested that it was she who brought the antique manuscript of Dream of the Red Chamber which was discovered at Beaver Falls in 2019. [15] Reeves brought in the Chinese with some difficulty, travelling for fifteen days to San Francisco to find only reluctant travellers, then riding the new railroad to New Orleans to gratefully collect his first seventy Chinese men who had been working on the railway. Another thirty men followed them to Beaver Falls the following week. A further influence in this matter was the Methodist minister Reverend Dyer, a missionary who knew that the Chinese worked hard and did not drink. [1]
It was not an easy transition though. The Chinese were met off the train by an angry mob of workers, and saloon keepers who had discovered that the Chinese did not drink. The local policeman, assisted by John Reeves and Judge Henry Hice, had to keep order for some weeks. [1] The Chinese workers resided in The Old Mansion House, built in 1875 with a cookhouse, dining room and sleeping quarters, at the corner of Third Street and Seventh Avenue. [1] [3] The contract for the Chinese workers was with San Francisco merchant Ah Chuck, who had the responsibility of returning their bodies to China should they die in American employ. The contract provided for rice, sleeping quarters and a gold dollar a day for each man. Ah Chuck also provided an interpreter, Lee Ten Pay. [1]
At first there was a settlement with the company workers, following a delegation from the Beaver Falls community. Management agreed as follows: "All cutlery workers were paid each month with the privilege of leaving if dissatisfied, and if they would leave the Chinamen alone and permit them to remain, the strikers would be reinstated with pay and all profits from the cutlery would be used for the community for seven years." The Chinese were satisfactory workers; their appearance attracted tourists who in turn brought good custom to the factory. [1]
However the Chinese had been brought in to reduce theft and to reduce the payroll. [13] The payroll dropped from $13,000 to $5,000 per month. Beaver Falls residents resented the Chinese, pushing them from the wooden walkways onto the muddy streets. [1] Some Chinese workers died after such attacks, and were buried at the far end of town in a specially dedicated cemetery, near Twenty-Eighth Street and Fifth Avenue on College Hill. [1] Their bones were then "removed and carried away in sacks." Although rumour had it that a mysterious benefactor paid for the removal of the bodies, which were exhumed and returned to China for traditional burial rites, another story suggests that a developer wanted to build homes on the land. Over the years, half of the Chinese left the company, and in 1877 the other half left, their fare to San Francisco being paid by the company, as per their contract. [1] Local residents returned to work at the plant. [3] [14]
The background to the use of Chinese labor was the immigration of 60,000 Chinese to the Pacific Coast and Rockies between the California Gold Rush and 1869. With the completion of the First transcontinental railroad in 1869, the Chinese began to move east, and potential employment at Beaver Falls made it one of their first eastern destinations. The local controversy following the strike at the cutlery company took the notice of Pennsylvania General Assembly and Congress, in the context of the contemporary Chinese question debate about immigration. "In some measure it contributed to the eventual passage of the Chinese Exclusion Act" of 1882. [16] [17]
The company gradually declined from 1877 to 1886 when it could no longer make a profit and was closed. [14] In 1890 the Champlin family purchased the knife-making equipment to start up their Cattaraugus Cutlery Company in Little Valley, New York. [18] [19] The Beaver Falls Cutlery Company buildings were subsequently occupied by the Metric Metal Works, The Eclipse Bicycle Company, The McCool Tube Company, the New York Pittsburgh Company, The Shelby Steel Tube Company and the Beaver Falls Car Works. [1]
The company produced "all kinds of knives and tableware ... These products ranged from finely crafted bone-handled knives to an austere, but sturdy wood-handled utensil. The former displayed a delicately etched logo "Beaver Falls Cutlery Company in a scroll with flowered ornamentation on the blade while the latter had a plain 27 mm stamp Beaver Falls Cut. Co." [14] The 26-page BFCC catalogue of the 1880s lists table knives, carvers, ivory carvers, screwdrivers, cigar knives, butchers' knives, stickers, skinner knives, hunting knives, scissors and shears. It lists many penknives: iron-lined, with redwood, brass-lined, and with German silver bolsters. It has a lithograph of the factory and of the American eagle trademark. [20]
Beaver Falls Historical Museum has a set of BFCC table knives with carved ivory handles and metal inlays, dating from the 1870s to 1880s. Another set also has ivory-handled knives, but includes three-tined forks. The knife blades carry a trademark showing the American eagle overcoming the British lion. [nb 4] The company also produced pearl-handled and wooden-handled tableware, and exhibited a pocketknife with 365 blades at the Centennial Exposition. [1] Regarding quality, Samuel Mason said this: [21]
"The forks are made from good quality of sheet steel, and hardened in oil with a spring temper, and beautifully finished; the prongs of the forks are well glazed inside and arched at the top; the fitting of the handle and bolster is flush and true, no plus 1-16th of an inch out of the handle; the blade of the knife is equally well ground and finished; every blade tested by being bent to a half circle; the prongs of the forks are twisted in like manner." [21]
In 1875, the largest-known carving knife and fork were those made by Joseph Rodgers & Son of 6 Norfolk Street, Sheffield, South Yorkshire, England. The set was made in celebration of the visit to Sheffield on 17 August of that year by Albert Edward, Prince of Wales. It was "A huge pair of carvers about six feet in length, the handles of which are of polished ivory." [nb 5] [22]
As a competitive response in 1876, Beaver Falls Cutlery Company made the "largest knife and fork in the world" of its time, [1] at the cost of $1,500. It was designed as a table carving knife and fork. The knife measured nine feet seven inches, the blade being ten inches wide. At eight times the size of a normal knife and fork, it was larger than the Sheffield carvers. The knife handle was created from an elephant tusk, carved with flowers and vines. The Chinese employees and the regular workmen made this with steel forged at Beaver Falls, and it was exhibited at the Centennial Exhibition of Philadelphia in 1876. [1] The etched design on the front of the BFCC carving knife blade included a silver-plated shark, a portrait of William Penn, the company name, the Pennsylvania coat of arms in complex detail and a portrait of Governor John F. Hartranft. On the reverse of the blade was scrollwork, and a picture of a mother with children. The carving fork had a patent spring guard which was etched with vines and clusters of grapes. The etching was by T.C. Moore, and the carving of the ivory handles was by Edwin Clayton. [14]
As of 2019, the whereabouts of the Beaver Falls knife and fork set is unknown, although a search was made by a retired Beaver Falls teacher, Sidney Kane, in 1975. Cattaraugus Cutlery Company purchased it along with the company machinery in 1887 following the closure. The set was removed to Springville, New York, then returned to Little Valley, New York. Philip Champlin, great grandson of John Brown Francis Champlin of Cattaraugus Cutlery Company, inherited it after his family's firm closed in 1963. He mailed it in a specially-made wooden crate to Wisconsin around February 1972, and nothing has been heard of it since. [1]
Two examples of merchant counter stamps on coins have been found. The stamps are 27mm long, and read Beaver Falls Cut. Co. One is on a half dollar dated 1875. [14]
A small display of early tableware, razors and pocket knives made by the company is kept at the Beaver County Industrial Museum at Darlington, Pennsylvania, which also has library resources. [1] [23] The Beaver Falls Historical Society Museum, in the city's Carnegie library, houses a larger collection of artefacts associated with the Company. [24]
Cutlery includes any hand implement used in preparing, serving, and especially eating food in Western culture. A person who makes or sells cutlery is called a cutler. The city of Sheffield in England has been famous for the production of cutlery since the 17th century and a train – the Master Cutler – running from Sheffield to London was named after the industry. Bringing affordable cutlery to the masses, stainless steel was developed in Sheffield in the early 20th century.
A switchblade (aka switch knife, automatic knife, pushbutton knife, ejector knife, flick knife, flick blade, or spring knife is a type of knife with a sliding or pivoting blade contained in the handle which is extended automatically by a spring when a button, lever, or switch on the handle or bolster is activated. Virtually all switchblades incorporate a locking blade, where the blade is locked against accidental closure when the blade is in the open position. It is unlocked by a mechanism that allows the blade to be folded and locked in the closed position.
A gravity knife is a knife with a blade contained in its handle, and that opens its blade by the force of gravity. This mechanism of opening is fundamentally different from the switchblade, which extends its spring-propelled blade automatically upon the push of a button, switch, or fulcrum lever. The main purpose of gravity opening is that it allows opening and closing to be done one handed, in situations where the other hand is occupied. Hence, historically they have been issued to parachutists to cut off caught lines, such as lines tangled in trees, a major potential use of the gravity knife.
The Laguiole knife is a traditional Occitan pocketknife, originally produced in the "knife city" of Thiers, source of 70% of France's cutting tool production, as well as the small village of Laguiole, both located in the Massif central region of France. Laguiole in this instance does not refer to the French knife brand but to a generic type of traditional slipjoint knife associated with this region of France.
The Camillus Cutlery Company was one of the oldest knife manufacturers in the United States as its roots date back to 1876. The Company produced millions of knives until it filed for bankruptcy in 2007. Its brand name and intellectual property rights were purchased by Acme United Corporation, which re-launched the Camillus brand in May 2009 using modern materials.
The Santoku bōchō or Bunka bōchō (文化包丁) is a general-purpose kitchen knife originating in Japan. Its blade is typically between 13 and 20 cm long, and has a flat edge and a sheepsfoot blade that curves down an angle approaching 60 degrees at the point. The term Santoku may refer to the wide variety of ingredients that the knife can handle: meat, fish and vegetables, or to the tasks it can perform: slicing, chopping and dicing, either interpretation indicating a multi-use, general-purpose kitchen knife. The Santoku's blade and handle are designed to work in harmony by matching the blade's width and weight to the weight of the tang and the handle.
Christopher Stanley Reeve is a South African-American knife maker, recognized as one of the most influential people in knife making history. Reeve founded Chris Reeve Knives (CRK) in 1984. In 2014, Reeve retired and was inducted into the Blade Magazine Hall of Fame in 2015.
Ontario Knife Company, also known as OKC, is an American manufacturer of knives and other edged and military tools.
Kershaw Knives designs, sources and manufactures a wide range of knives, including pocketknives, sporting knives, and kitchen cutlery. Kershaw is a brand of Kai USA Ltd., a member of the KAI Group, headquartered in Tualatin, Oregon, United States.
The V-42 stiletto was a stiletto and fighting knife issued during World War II to the First Special Service Force, a joint American/Canadian commando unit.
W.R. Case & Sons Cutlery Company is an American manufacturer of traditional pocket knives, fixed blades/sporting knives, kitchen knives, limited edition commemoratives and collectibles. The company originated in Little Valley, New York, around the turn of the 20th century, before relocating to its current home, Bradford, Pennsylvania, in 1905. The company's namesake, William Russell Case, first made knives with his brothers under the name Case Brothers Cutlery Company. His son, John Russell ("Russ") Case, worked as a salesman for his father's company before founding W.R. Case & Sons.
Imperial Schrade Corp. was an American knife manufacturer of hunting knives, pocketknives, utility knives, and bayonets during the 20th and early 21st centuries. The consolidation of five forerunner companies, including its namesakes, the Imperial Knife Company, founded 1916, and the Schrade Cutlery Company, founded in 1904, Imperial Schrade manufactured its products in the United States and Ireland and sold through hardware stores, department stores, and on military bases. The original company's fortunes declined and in 2004 it entered into bankruptcy where all equipment and intellectual property was sold off to reimburse creditors. The name and intellectual property was bought by Taylor Brands and used for marketing purposes.
The Cattaraugus Cutlery Company began as the New York distribution company J.B.F. Champlin and Son, founded by John Brown Francis Champlin and his son Tint in 1882. The Champlins expanded into knife production, and along with William R. Case and his brothers, they formed Cattaraugus Cutlery in 1886, based in Little Valley. The company hired expert cutlers from Germany, England, and other U.S. manufacturers, to produce high quality cutlery, and purchased knife-making equipment from the defunct Beaver Falls Cutlery Company. Admiral Byrd selected Cattaraugus knives to take on his expedition to the South Pole.
A grapefruit knife is a special type of knife designed specifically for cutting grapefruit. Grapefruit knives are small with a curved serrated blade, designed to hug the curves of the grapefruit. This is used to separate the outer edge of the segments from the rim of the fruit. The term "grapefruit knife" can refer to a type of knife with short, serrated twin blades about 2mm apart, used to separate the sides of each section from the dividing membrane. Some grapefruit knives incorporate both types, a double-sided curved blade on one side and the parallel twin blades on the other. Another type includes an angled tip and double sided serrated blade. When both types are used, the result is an intact-looking fruit with sections which lift out easily - especially if a "grapefruit spoon" is used.
The Western Knife Company was a manufacturer of hunting knives which began operations in Boulder, Colorado in 1911. The company is probably best known for its "Bowie" style hunting knives. The company was purchased by Coleman in 1984. Camillus Cutlery Company purchased Western in 1992. In February, 2007, Camillus closed as a result of bankruptcy due to competition from companies making cheaper knives in other countries. The Western brand and Camillus brand are now owned by the Acme United Corporation and manufactured in Asia.
A table knife is an item of cutlery with a single cutting edge, and a blunt end – part of a table setting. Table knives are typically of moderate sharpness only, designed to cut prepared and cooked food.
Ka-Bar is the contemporary popular name for the combat knife first adopted by the United States Marine Corps in November 1942 as the 1219C2 combat knife, and subsequently adopted by the United States Navy as the U.S. Navy utility knife, Mark 2. Ka-Bar is the name of a related knife manufacturing company, Ka-Bar Knives., Inc., of Olean, New York, a subsidiary of the Cutco Corporation.
William Wales Scagel or Bill Scagel was an American knifemaker whose style had a profound impact on the cutlery trade, influencing it for over 100 years.
The French Nail were locally fabricated and converted bayonets, knives and stabbing weapons for use in the First World War. These were crude stabbing spikes made by adding a point to a steel stake which had its rearmost section heated and bent into a crude handle.
Thomas Skinner was an etcher, inventor and amateur oil-painter in Sheffield, West Riding of Yorkshire, England. During the 1840s he invented a method by which the mass production of etched designs on steel blades could be facilitated by means of paper transfers. The British and American patents brought him a good income, but he devoted his life to developing the method. After he was widowed he was killed by arsenic poisoning at the hands of his housekeeper Kate Dover.