The blue bottle experiment is a color-changing redox chemical reaction. An aqueous solution containing glucose, sodium hydroxide, methylene blue is prepared in a closed bottle containing some air. Upon standing, it spontaneously turns from blue to colorless due to reduction of methylene blue by the alkaline glucose solution. However, shaking the bottle oxidizes methylene blue back into its blue form. With further shaking, this color-change cycle can be repeated many times. [1] This experiment is a classic chemistry demonstration that can be used in laboratory courses as a general chemistry experiment to study chemical kinetics and reaction mechanism. [2] The reaction also works with other reducing agents besides glucose [3] and other redox indicator dyes besides methylene blue. [4]
The mechanism of the blue bottle experiment requires an understanding of rates and mechanisms of complex interacting chemical reactions. In complex chemical reactions, individual sub-reactions can occur simultaneously but at significantly different rates. These, in turn, can be affected by reagent concentration and temperature. In most cases, the overall reaction rate is determined by the fastest single component reaction. However, when some processes form intermediate molecules which then react in other processes to form the end product, the rate of the overall reaction is determined by the rate of the slowest reaction. In such circumstances the intermediate products are usually in a steady state at low concentrations because they are highly reactive. [7] Equilibrium state requires that all reaction forward and backward mechanism happens at the same rate. [8] Thus, the overall net reaction is determined by the sum of all the mechanism steps where the rate depends on the concentration and temperature. The blue bottle experiment illustrates this principle of interacting reactions with different rates. [4]
The blue bottle experiment requires only three reagents: potassium hydroxide solution, dextrose solution, and dilute methylene blue solution. These reagents are added to a flask, mixed, and the flask is stoppered. The initial color of the solution is blue, but upon standing for a short interval it spontaneously fades to colorless, as the alkaline dextrose solution reduces the methylene blue to colorless leuco-methylene blue. Shaking the flask causes oxygen present in the head space air to dissolve in the solution and oxidize the leuco-methylene blue back to its colored form again. [9] Another variation uses methylene blue in water, glucose, and caustic soda (NaOH). [10] There are many versions of the experiment, however, unlike the classical version where dye is necessary to use as a catalyst for the reaction, the green and rapid versions undergo autoxidation even in the absence of the dye. [11]
In the past, it was thought that the reaction occurred by the oxidation of an aldehyde group to a carboxylic acid under alkaline conditions. For instance, glucose would be oxidized to gluconate by oxygen. [12] However, the experiment also works with compounds such as vitamin C and benzoin, which do not contain an aldehyde group. [4] Thus, the reaction is actually the oxidation of an acyloin or related α-hydroxy carbonyl group, which is a structural feature of glucose, to a 1,2-diketone. [13] The reduced redox dye (colorless state) is formed from oxidized redox dye (blue). The color-change that occurs in the blue bottle experiment has features of a clock reaction, in which a visible change in the concentration of one or more reagents suddenly occurs upon the exhaustion of a limiting reagent. For example, the limiting reactant, oxygen, is consumed by another reactant, benzoin, with the help of safranin as a catalyst. Once the limited amount of oxygen has been used up, the catalyst is unable to change forms, and as a result, the solution changes color.
The aqueous solution in the classical reaction contains glucose, sodium hydroxide and methylene blue. [14] In the first step an acyloin of glucose is formed. The next step is a redox reaction of the acyloin with methylene blue in which the glucose is oxidized to diketone in alkaline solution [6] and methylene blue is reduced to colorless leucomethylene blue. If there is enough oxygen available (i.e., after shaking the bottle), leucomethylene blue is immediately re-oxidized to methylene blue and the blue color of the solution persists. However, when the solution is left to rest, the dissolved oxygen is gradually irreversibly [11] consumed, and at the point where it has been completely exhausted, the glucose reduction of methylene blue proceeds unopposed and the color of the solution rapidly disappears. [15] The reaction is first order in glucose, methylene blue and hydroxide ion and zero-order in oxygen. The process can be described as a pseudo first order reaction, and can be used to illustrate the changing concentrations of the reagents over the course of the reaction as the solution changes from blue back to colorless. [1]
The final glucose oxidation products besides sodium gluconate have been identified as D-arabino-hexos-2-ulose (glucosone), the anion of D-arabinonate after splitting off of a formate anion and arabinonic acid. [13]
Wellman and Noble proposed a new formulation for the Blue Bottle experiment in which vitamin C serves as a reducing agent instead of glucose; the methylene blue and oxygen are still used. [16] Copper is added as a catalyst for the reoxidation of leucomethylene blue to methylene blue. These modifications give an experiment that generates a smaller amount of waste that is less corrosive and easier to neutralize, and therefore is an example of green chemistry modification. [17]
The Chen [18] autoxidation of benzoin had performed a similar experiment with respect to the classical and green versions. It was found that the traffic light and vanishing valentine experiments can become successful regardless of whether a sugar is added. One variation is more rapid, with the number of color change cycles do not last as long as the classical and green versions because the reactants are present in smaller amounts; also, the reducing agent for this experiment is benzoin, which is added to help increase the number of cycles in the solution. Moreover, the usable period in this experiment is quite short. Although the experiment is prepared overnight, the reducing agent can be added at any time to be able to observe the solution more. [19]
Zhang, Tsitkov, and Hess from Columbia University [20] proposed an enzymatic version of the "blue bottle experiment". They named it the "green bottle experiment", since the system is colored green and the reagents are safer than classical approaches. The experiment is performed in a clear glass vial containing two common enzymes (glucose oxidase and horseradish peroxidase), glucose, and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (abbreviated as ABTS) in PBS buffer. A thin layer of oil is used to block the solution from the air. The solution initially turns green and then turns colorless with the depletion of dissolved oxygen. Shaking the solution introduces fresh oxygen and colors the solution green again until the oxygen is consumed.
This version relies on three enzymatic reactions. First, the glucose oxidase catalyzes the oxidation of glucose in the presence of oxygen and produces hydrogen peroxide. Second, the horseradish peroxidase utilizes the hydrogen peroxide to oxidize ABTS to its radical cationic form, ABTS+•. As the dissolved oxygen is consumed in the solution, the third reaction occurs: glucose oxidase catalyzes the reduction of ABTS+• back to ABTS in the presence of glucose. This system can also form beautiful patterns arising from reaction-driven Rayleigh–Bénard convection. [21]
The chemical reactions and mechanism in the blue bottle experiment rely on the oxidation of a sugar with the aid of air and a redox dye in a basic solution. Other variations of this reaction have been reported that use four families of redox dyes: thiazines, oxazines, azines, and indigo carmine have all been reported to work with glucose and caustic soda. [19]
The chemical traffic light is a color-changing redox reaction that is related to the blue bottle experiment. One of the early formulas consists of glucose, sodium hydroxide, indigo carmine (dye), and water. Another formula consists of indigo carmine , ascorbic acid (Vitamin C), sodium bicarbonate, sodium chloride, copper(II) sulfate, sodium hydroxide and water. [17] By doing so, chemical waste and the level of corrosive chemicals is reduced. The amount of solid chemicals dissolved in the experiment could be reduced from 60 grams to 6 grams. And the pH could be lowered from 13 to 3 which is easier to neutralize the pH to 7 by adding baking soda before disposal. [16] Also, it is safer and the reactions also occur faster and are easier to perform.
At first, all chemicals are added together and the color appears yellow. After shaking, the color turns green and then changes to red after it is left untouched. When further observed, the color turns back to yellow, which is why the solution is called the chemical traffic light. This reaction can be repeated many times, but it needs additional oxygen or indigo carmine.
This reaction occurs by oxidation and reduction of the solution where alkaline glucose solution is acting as a reducing agent. The glucose solution is added to the solution containing indicator (dye indigo carmine) the color changes occur. This reaction is also known as chemical clock experiment because concentrations of the products and reactants changed over the specific period. [22] When the solution is shaken, oxygen dissolves in the solution and oxidizes indigo carmine. Solution becomes red if a small amount of oxygen is dissolved, and green if all of indigo carmine is oxidized. [23] The solution will turn back to original yellow color when the concentration of oxygen level drops. [24]
The vanishing valentine experiment is another chemical reaction related to the blue bottle experiment. This reaction occurs when water, glucose, sodium hydroxide, and resazurin is mixed in a flask. When the solution is shaken, it turns from light blue to a reddish color. The solution turns back to a light blue after being left to stand for a while. This reaction can be repeated several times. [25]
After mixing all the components, shake the bottle and the color will turn to red or pink depend on the amount of resazurin in the solution. More resazurin will result in more time needed for the solution to turn back the color and the intensity of the red color.
The chemical reaction stimulates glucose to reduce resazurin to resorufin. It would then be reduced again into a colorless compound called dihydroresorufin. When dihydroresorufin is shaken, it is oxidized back to resorufin. This is due to the fact that shaking it results oxygen in the bottle to oxidized dihydroresorufin back into resorufin. [26]
Erioglaucine, a food colorant and a redox dye, was found to be an effective substitute for methylene blue in the blue bottle experiment. Since some candies and drinks such as Gatorade contain the dye and a reducing sugar, only sodium hydroxide need be added to turn these food products into a blue bottle solution. [27]
Thionine can be used in the green version of the experiment in combination with copper/iron catalyst to create the purple flask. [28]
Pattern formation is when a solution containing NaOH, glucose, and dye is poured into a Petri dish that is open to the atmosphere. [29] This will result in solution changing its structure over a period of time. Structures arise from molecular transport through diffusion and chemical kinetics. Patterns formed in the Petri dish can be described as a mosaic pattern; web-like, dynamic spiral, branching, and lines connecting to each others. [30]
Changes in pattern formation are not homogeneous and can be affected by several factors. Different types of dye in solution will give the same pattern because of the bond's formation and the dynamics remain the same, this is because the solution has the same colour as the dye. Different amounts of dye can result in density change in the solution and this results in changing of convective motion. Different amounts of dye can bring in different amounts of convention cells which are also formed by different amounts of glucose and oxidized product. This can result in an interesting spatial phenomena. Time can also affect pattern formation. As the time passed, one pattern gradually faded away. Spirals and branches started to disappear and eventually disappeared fully. These facts indicate that oxygen affects the chemical reaction and this plays a fundamental role in the pattern formation. Pattern formation may also form from a chemically driven convective instability. This means that matter is exchanged across the air-reaction mixture interface, due to the fluctuations in the molecular nature of chemical systems. [31] The temperature can affect the formation of pattern. [6] Colder temperature formed a clearer pattern than hot temperature. The shape of the Petri dish also contributed to the pattern formation. [6]
A group of researchers of the University of Glasgow named Pons, Batiste and Bees came up with a small conclusion about pattern formation in the methylene blue-glucose system. They came up with a conclusive statement that a similar pattern can be formed in a container with accessible oxygen. This resulting surface tension effect isn't required to produce the instability. Small holes were also found in the lid of container that oxygen can't access resulting in a thin, blue, and lower amount of oxygen. Pattern length and time scale had been explored in one of their experiments due to the variation in viscosity and fluid depth. The experiment reveals that the wavelength is formed as a pattern starts to form quickly. Then wavelength or pattern can be maintained or oscillate for a while. [32]
Titration is a common laboratory method of quantitative chemical analysis to determine the concentration of an identified analyte. A reagent, termed the titrant or titrator, is prepared as a standard solution of known concentration and volume. The titrant reacts with a solution of analyte to determine the analyte's concentration. The volume of titrant that reacted with the analyte is termed the titration volume.
Sodium hydroxide, also known as lye and caustic soda, is an inorganic compound with the formula NaOH. It is a white solid ionic compound consisting of sodium cations Na+ and hydroxide anions OH−.
Potassium ferricyanide is the chemical compound with the formula K3[Fe(CN)6]. This bright red salt contains the octahedrally coordinated [Fe(CN)6]3− ion. It is soluble in water and its solution shows some green-yellow fluorescence. It was discovered in 1822 by Leopold Gmelin.
An oxidizing agent is a substance in a redox chemical reaction that gains or "accepts"/"receives" an electron from a reducing agent. In other words, an oxidizer is any substance that oxidizes another substance. The oxidation state, which describes the degree of loss of electrons, of the oxidizer decreases while that of the reductant increases; this is expressed by saying that oxidizers "undergo reduction" and "are reduced" while reducers "undergo oxidation" and "are oxidized". Common oxidizing agents are oxygen, hydrogen peroxide and the halogens.
Sodium hypochlorite, commonly known in a dilute solution as (chlorine) bleach, is an inorganic chemical compound with the formula NaOCl, comprising a sodium cation and a hypochlorite anion. It may also be viewed as the sodium salt of hypochlorous acid. The anhydrous compound is unstable and may decompose explosively. It can be crystallized as a pentahydrate NaOCl·5H
2O, a pale greenish-yellow solid which is not explosive and is stable if kept refrigerated.
Methylthioninium chloride, commonly called methylene blue, is a salt used as a dye and as a medication. As a medication, it is mainly used to treat methemoglobinemia by converting/chemically reducing the ferric iron in hemoglobin to ferrous iron. Specifically, it is used to treat methemoglobin levels that are greater than 30% or in which there are symptoms despite oxygen therapy. It has previously been used for treating cyanide poisoning and urinary tract infections, but this use is no longer recommended.
Phenolphthalein ( feh-NOL(F)-thə-leen) is a chemical compound with the formula C20H14O4 and is often written as "HIn", "HPh", "phph" or simply "Ph" in shorthand notation. Phenolphthalein is often used as an indicator in acid–base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions. It belongs to the class of dyes known as phthalein dyes.
Potassium permanganate is an inorganic compound with the chemical formula KMnO4. It is a purplish-black crystalline salt, that dissolves in water as K+ and MnO−
4, an intensely pink to purple solution.
Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 °C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper.
The Cannizzaro reaction, named after its discoverer Stanislao Cannizzaro, is a chemical reaction which involves the base-induced disproportionation of two molecules of a non-enolizable aldehyde to give a primary alcohol and a carboxylic acid.
Brilliant blue FCF is a synthetic organic compound used primarily as a blue colorant for processed foods, medications, dietary supplements, and cosmetics. It is classified as a triarylmethane dye and is known under various names, such as FD&C Blue No. 1 or acid blue 9. It is denoted by E number E133 and has a color index of 42090. It has the appearance of a blue powder and is soluble in water and glycerol, with a maximum absorption at about 628 nanometers. It is one of the oldest FDA-approved color additives and is generally considered nontoxic and safe.
Sodium dithionite is a white crystalline powder with a sulfurous odor. Although it is stable in dry air, it decomposes in hot water and in acid solutions.
The iodine clock reaction is a classical chemical clock demonstration experiment to display chemical kinetics in action; it was discovered by Hans Heinrich Landolt in 1886. The iodine clock reaction exists in several variations, which each involve iodine species and redox reagents in the presence of starch. Two colourless solutions are mixed and at first there is no visible reaction. After a short time delay, the liquid suddenly turns to a shade of dark blue due to the formation of a triiodide–starch complex. In some variations, the solution will repeatedly cycle from colorless to blue and back to colorless, until the reagents are depleted.
Patent Blue V, also called Food Blue 5, Sulphan Blue, Acid Blue 3, L-Blau 3, C-Blau 20, Patentblau V, Sky Blue, or C.I. 42051, is a sky blue synthetic triphenylmethane dye used as a food coloring. As a food additive, it has E number E131. It is a sodium or calcium salt of [4-(α- -5-hydroxy- 2,4-disulfophenylmethylidene)-2,5-cyclohexadien-1-ylidene] diethylammonium hydroxide inner salt.
Thionine, also known as Lauth's violet, is the salt of a heterocyclic compound. It was firstly synthesised by Charles Lauth. A variety of salts are known including the chloride and acetate, called respectively thionine chloride and thionine acetate. The dye is structurally related to methylene blue, which also features a phenothiazine core. The dye's name is frequently misspelled with omission of the e, and is not to be confused with the plant protein thionin. The -ine ending indicates that the compound is an amine.
A solvated electron is a free electron in a solution, and is the smallest possible anion. Solvated electrons occur widely. Often, discussions of solvated electrons focus on their solutions in ammonia, which are stable for days, but solvated electrons also occur in water and other solvents – in fact, in any solvent that mediates outer-sphere electron transfer. The solvated electron is responsible for a great deal of radiation chemistry.
2,6-Dichlorophenolindophenol is a chemical compound used as a redox dye. When oxidized, DCPIP is blue with a maximal absorption at 600 nm; when reduced, DCPIP is colorless.
In chemistry, the haloform reaction is a chemical reaction in which a haloform is produced by the exhaustive halogenation of an acetyl group, in the presence of a base. The reaction can be used to transform acetyl groups into carboxyl groups or to produce chloroform, bromoform, or iodoform. Note that fluoroform can't be prepared in this way.
A chemical oscillator is a complex mixture of reacting chemical compounds in which the concentration of one or more components exhibits periodic changes. They are a class of reactions that serve as an example of non-equilibrium thermodynamics with far-from-equilibrium behavior. The reactions are theoretically important in that they show that chemical reactions do not have to be dominated by equilibrium thermodynamic behavior.
The chemical chameleon is a redox reaction, well known from classroom demonstrations, that exploits the dramatic color changes associated with the various oxidation states of manganese.
{{cite journal}}
: CS1 maint: multiple names: authors list (link)