Bort

Last updated
Bort
(also boort or boart)
Diamond-270244.jpg
A mixture of bort and gem diamonds (larger inclusions) from the Crater of Diamonds State Park
General
Category Mineral variety
Formula
(repeating unit)
C
Identification
Colorvaries (white to yellowish in powder form, yellow to brownish in larger shards)
Use/purpose
Major varieties
Similar occurrences

Bort, boart, or boort is an umbrella term used in the diamond industry to refer to shards of non-gem-grade/quality diamonds. In the manufacturing and heavy industries, "bort" is used to describe dark, imperfectly formed or crystallized diamonds of varying levels of opacity. The lowest grade, "crushing bort," is crushed by steel mortars and used to make industrial-grade abrasive grits. Small bort crystals are used in drill bits. The Democratic Republic of the Congo provides 75% of the world supply of crushing bort. [1] [2] [3]

Contents

Use and application

Bort-like heavily twinned diamond from Congo Diamant.jpg
Bort-like heavily twinned diamond from Congo

Apart from the use of bort in the diamond gem industry, where the material is used as an abrasive—with a hardness close to or the same as that of diamond itself—to scour and polish the various facets of gem stones, in smaller flakes and particles it is also used as an additive for scouring or polishing pastes and agents. Larger particles find their use as a protective and cutting edge to drill bits, saws and other (cutting) tools and machinery for longer lifespan and to substantially increase their efficiency (for instance, for tools that drill or saw through (reinforced) concretecement, stone (pebbles) and steel (rebar) alike—or other hard materials, both metal and non-metal). [4]

When bort particles varying from one to two nanometers [5] are added to lubricants such as paraffin oil, these particles will embed themselves into minute irregularities and imperfections of moving-part surfaces, whereas particles that remain suspended in the lubricant oil act as both a polishing agent further smoothening the surfaces, as well as ball bearings between the surfaces that move relative to or revolve within or around one another. Such nanotechnology applications with paraffin oil containing approximately 1% of these nano-size bort particles may decrease the friction up to half of that without the nano-particles. [6] [7]

See also

Necklace made of cut-off chips and low-quality rough diamonds Necklace made of rough diamonds.jpg
Necklace made of cut-off chips and low-quality rough diamonds

Related Research Articles

<span class="mw-page-title-main">Graphite</span> Allotrope of carbon, mineral, substance

Graphite is a crystalline form of the element carbon. It consists of stacked layers of graphene. Graphite occurs naturally and is the most stable form of carbon under standard conditions. Synthetic and natural graphite are consumed on large scale for uses in pencils, lubricants, and electrodes. Under high pressures and temperatures it converts to diamond. It is a weak conductor of heat and electricity.

A lubricant is a substance that helps to reduce friction between surfaces in mutual contact, which ultimately reduces the heat generated when the surfaces move. It may also have the function of transmitting forces, transporting foreign particles, or heating or cooling the surfaces. The property of reducing friction is known as lubricity.

<span class="mw-page-title-main">Lapidary</span> Shaping of gemstones etc. for jewellery etc.

Lapidary is the practice of shaping stone, minerals, or gemstones into decorative items such as cabochons, engraved gems, and faceted designs. A person who practices lapidary is known as a lapidarist. A lapidarist uses the lapidary techniques of cutting, grinding, and polishing. Hardstone carving requires specialized carving techniques.

<span class="mw-page-title-main">Mineral oil</span> Liquid mixture of higher alkanes from a mineral source, particularly a distillate of petroleum

Mineral oil is any of various colorless, odorless, light mixtures of higher alkanes from a mineral source, particularly a distillate of petroleum, as distinct from usually edible vegetable oils.

<span class="mw-page-title-main">Motor oil</span> Lubricant used for lubrication of internal combustion engines

Motor oil, engine oil, or engine lubricant is any one of various substances used for the lubrication of internal combustion engines. They typically consist of base oils enhanced with various additives, particularly antiwear additives, detergents, dispersants, and, for multi-grade oils, viscosity index improvers.. The main function of motor oil is to reduce friction and wear on moving parts and to clean the engine from sludge and varnish (detergents). It also neutralizes acids that originate from fuel and from oxidation of the lubricant (detergents), improves sealing of piston rings, and cools the engine by carrying heat away from moving parts.

Cutting fluid Coolants and lubricants used in metalworking

Cutting fluid is a type of coolant and lubricant designed specifically for metalworking processes, such as machining and stamping. There are various kinds of cutting fluids, which include oils, oil-water emulsions, pastes, gels, aerosols (mists), and air or other gases. Cutting fluids are made from petroleum distillates, animal fats, plant oils, water and air, or other raw ingredients. Depending on context and on which type of cutting fluid is being considered, it may be referred to as cutting fluid, cutting oil, cutting compound, coolant, or lubricant.

An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. In short, the ceramics which are used to cut, grind and polish other softer materials are known as abrasives.

Wear Damaging, gradual removal or deformation of material at solid surfaces

Wear is the damaging, gradual removal or deformation of material at solid surfaces. Causes of wear can be mechanical or chemical. The study of wear and related processes is referred to as tribology.

<span class="mw-page-title-main">Sandpaper</span> Abrasive material used for smoothing softer materials

Sandpaper and glasspaper are names used for a type of coated abrasive that consists of sheets of paper or cloth with abrasive material glued to one face.

Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication and wear. Tribology is highly interdisciplinary, drawing on many academic fields, including physics, chemistry, materials science, mathematics, biology and engineering. People who work in the field of tribology are referred to as tribologists.

<span class="mw-page-title-main">Synthetic oil</span> Lubricant consisting of artificially made chemical compounds

Synthetic oil is a lubricant consisting of chemical compounds that are artificially made. Synthetic lubricants can be manufactured using chemically modified petroleum components rather than whole crude oil, but can also be synthesized from other raw materials. The base material, however, is still overwhelmingly crude oil that is distilled and then modified physically and chemically. The actual synthesis process and composition of additives is generally a commercial trade secret and will vary among producers.

Grinding wheel Abrasive cutting tool for grinders

Grinding wheels contains abrasive compounds for grinding and abrasive machining operations. Such wheels are also used in grinding machines.

<span class="mw-page-title-main">Sharpening stone</span> Abrasive slab used to sharpen tools

Sharpening stones, or whetstones, are used to sharpen the edges of steel tools such as knives through grinding and honing.

Emery paper is a type of abrasive paper or sandpaper, that can be used to abrade surfaces or mechanically finish a surface. Operations include deburring, polishing, paint removal, corrosion removal, sizing, etc. This is accomplished by rubbing the abrasive-coated paper, with some pressure, against the object being processed. Abrasion may be performed by hand, electrically powered, or air powered equipment.

<span class="mw-page-title-main">Polishing (metalworking)</span> Abrasive process for creating smooth finished surfaces

Polishing and buffing are finishing processes for smoothing a workpiece's surface using an abrasive and a work wheel or a leather strop. Technically polishing refers to processes that use an abrasive that is glued to the work wheel, while buffing uses a loose abrasive applied to the work wheel. Polishing is a more aggressive process while buffing is less harsh, which leads to a smoother, brighter finish. A common misconception is that a polished surface has a mirror bright finish, however most mirror bright finishes are actually buffed.

Diamond tool

A diamond tool is a cutting tool with diamond grains fixed on the functional parts of the tool via a bonding material or another method. As diamond is a superhard material, diamond tools have many advantages as compared with tools made with common abrasives such as corundum and silicon carbide.

<span class="mw-page-title-main">Sandblasting</span> Method of marking or cleaning a surface

Sandblasting, sometimes known as abrasive blasting, is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface or remove surface contaminants. A pressurised fluid, typically compressed air, or a centrifugal wheel is used to propel the blasting material. The first abrasive blasting process was patented by Benjamin Chew Tilghman on 18 October 1870.

Oil additives are chemical compounds that improve the lubricant performance of base oil. The manufacturer of many different oils can utilize the same base stock for each formulation and can choose different additives for each specific application. Additives comprise up to 5% by weight of some oils.

Dry lubricants or solid lubricants are materials that, despite being in the solid phase, are able to reduce friction between two surfaces sliding against each other without the need for a liquid oil medium.

Abrasive machining is a machining process where material is removed from a workpiece using a multitude of small abrasive particles. Common examples include grinding, honing, and polishing. Abrasive processes are usually expensive, but capable of tighter tolerances and better surface finish than other machining processes

References

  1. Spear, K.E; Dismukes, J.P. (1994). Synthetic Diamond: Emerging CVD Science and Technology. WileyIEEE. p. 628. ISBN   0-471-53589-3. Archived from the original on 2015-04-25.
  2. Industrial diamond. Encyclopædia Britannica.
  3. Bort. Encyclopædia Britannica.
  4. MINES BUREAU (2010). Minerals Yearbook Metals and Minerals 2010 Volume I. pp. 21–22. ISBN   978-1-4113-3449-6. Archived from the original on December 30, 2018. Retrieved December 30, 2018.{{cite book}}: CS1 maint: multiple names: authors list (link)
  5. Scientific notation in SI unit(s): 1–2 × 10−9 m.
  6. Ballengee, Jason (2016). "Nanodiamond and Lubrication Applications" (PDF). aiche.org. SP3 NANOTECH, LLC. Archived (PDF) from the original on December 6, 2018. Retrieved December 6, 2018.
  7. GEORGE, BEEKMAN (January 6, 1997). "Betere smering met behulp van zeer fijn diamantpoeder (Better lubrication using diamond powder of very small particles)". nrc.nl (in Dutch). NRC Handelsblad. Archived from the original on December 6, 2018. Retrieved December 6, 2018.{{cite news}}: CS1 maint: multiple names: authors list (link)