Breda Formation

Last updated
Breda Formation
Stratigraphic range: Chattian-Pliocene
~28–3.6  Ma
Verbreiding Breda Formatie 150dpi.png
Type Geological formation
Unit of Upper North Sea Group
Sub-units Aalten Mb., Delden Mb., Eibergen Mb., Zenderen Mb.
Underlies Oosterhout Fm., Kiezeloolite Fm.
Overlies Rupel Fm., Veldhoven Fm.
Thicknessup to more than 700 m (2,300 ft)
Lithology
PrimaryMarine sandstones and clays
Other Conglomerate
Location
Region Europe
CountryFlag of the Netherlands.svg  Netherlands
Type section
Named for Breda (North Brabant)

The Breda Formation (Dutch : Formatie van Breda; abbreviation: BR) is a geologic formation in the subsurface of the Netherlands. The formation consists of marine glauconiferous sands and clays that were deposited during the Miocene epoch. Although the formation is not very rich in fossils, sometimes bones of fishes, mammals (Leptophoca cf. proxima, Protophocaena minima ), [1] shells and shark teeth (a.o of megalodon) are found.

Contents

Stratigraphy and lithology

The Breda Formation was deposited in the shallow sea that covered the Netherlands during the Miocene. It is mostly on top of the Oligocene clays of the Rupel Formation or late Oligocene sands and clays of the Veldhoven Formation. The Breda Formation can be a couple of meters (in the Roerdal Graben) to more than 700 metres (2,300 ft) thick. The top is formed by an erosional disconformity in the south and east of the Netherlands. In the west the contact with the Pliocene Oosterhout Formation is more gradual. In the Roerdal Graben the mostly Pliocene Kiezeloolite Formation is sometimes on top of the Breda Formation.

Locally the Breda Formation can be subdivided into members: the Aalten Member (silty calcareous clay, rich in shells), the Eibergen Member (clay alternating with thin sand layers, with a basal conglomerate in which shark teeth and whale bones were found), the Zenderen Member (green, glauconiferous fine sand) and the Delden Member (sandy, glauconite and goethite bearing clay and loam.

The Breda Formation corresponds largely with the Berchem Formation of northern Belgium.

Related Research Articles

The Landen Formation is a lithostratigraphic unit in the subsurface of the Netherlands. This formation shares its name with the Belgian Landen Group, but the Belgian unit is thinner and has different definitions. The Landen Formation consists of shallow marine and lagoonal sediments from the late Paleocene to early Eocene. Dutch stratigraphers see the Landen Formation as part of the Lower North Sea Group.

The Heers Formation is a geologic formation in the subsurface of Belgium. The formation consists of sand and marl and was deposited in the shallow sea that covered Belgium during the middle to late Selandian age of the Paleocene epoch.

The Dongen Formation is a geologic formation in the subsurface of the Netherlands. The formation consists of early Eocene marine clay and sand. It is named after the town of Dongen in North Brabant.

The Rupel Formation is a geologic formation in the subsurface of the Netherlands that consists of Oligocene marine sands and clays. The Rupel Formation is part of the Middle North Sea Group and correlates exactly with the Belgian Rupel Group.

The Rupel Group is a stratigraphic group of rock strata in the subsurface of Belgium. It is subdivided into three formations that are all marine deposits of Oligocene age.

The Tongeren Formation is a geologic formation in the subsurface of the Netherlands. The formation consists of shallow marine, epicontinental and continental sediments, predominantly clay and sand from the late Eocene and early Oligocene epochs. The Tongeren Formation is part of the Middle North Sea Group and correlates with the Tongeren Group from Belgian stratigraphy.

The Aalter Formation is a geologic formation in the subsurface of northwest Belgium. The formation consists of marine clay and sand, deposited in the shallow sea that covered northern and central Belgium in the Eocene epoch.

The Veldhoven Formation is a geologic formation in the subsurface of the Netherlands. The formation consists of an alternation of marine clay and sand from the Oligocene epoch.

The Voort Formation or Voort Member is a stratigraphic unit in the subsurface of north Belgium and the south of the Netherlands. The unit has the status of a formation in Belgium but is seen as a member of the Veldhoven Formation in the Netherlands. The Voort Formation consists of shallow marine sands with a late Oligocene age.

The Maldegem Formation is a geologic formation in the Belgian subsurface. The formation consists of alternating marine clay and sand strata, deposited during the late Eocene.

The Brussel Formation is a geologic formation in the subsurface of central Belgium. The formation is named after the Belgian capital, Brussels. It consists of shallow marine sandstone and calcareous sands, deposited in the sea that covered Belgium 45 million years ago, in the Eocene.

The Tongeren Group is a lithostratigraphic unit in the subsurface of Belgium. It consists of shallow marine, epicontinental and/or continental clays and sands from the late Eocene to early Oligocene epochs.

The Hanau-Seligenstadt Basin is a subbasin of the Upper Rhine Graben southeast of Frankfurt am Main.

<span class="mw-page-title-main">Peace River Formation (Florida)</span> Geological formation in Florida

The Peace River Formation is a Late Oligocene to Early Miocene geologic formation in the west-central Florida peninsula.

Gerard Spaink was a Dutch malacologist.

The Kattendijk Formation is a five million years old marine geological formation north of Antwerp, Belgium. including the north-western parts of the Campine region. The area was named by De Heuter and Laga in 1976. The sands range from medium fine to coarse and contain a large proportion of shell grit.

The Belgrade Formation is a limestone geologic formation in North Carolina characterized by limestone coquina mixed with sand, and thinly laminated clays. It preserves fossils dating back to the Paleogene period.

<span class="mw-page-title-main">Columbus Basin</span>

The Columbus Basin is a foreland basin located off the south eastern coast of Trinidad within the East Venezuela Basin (EVB). Due to the intensive deformation occurring along the Caribbean and South American plates in this region, the basin has a unique structural and stratigraphic relationship. The Columbus Basin has been a prime area for hydrocarbon exploration and production as its structures, sediments and burial history provide ideal conditions for generation and storage of hydrocarbon reserves. The Columbus Basin serves as a depocenter for the Orinoco River delta, where it is infilled with 15 km of fluvio-deltaic sediment. The area has also been extensively deformed by series of north west to southeast normal faults and northeast to southwest trending anticline structures.

<span class="mw-page-title-main">Geology of Malta</span>

The Geology of Malta consists of a sequence of sedimentary rocks of late Oligocene to late Miocene age cut through by a set of extensional faults of Pliocene age.

<span class="mw-page-title-main">Nam Con Son Basin</span>

The Nam Con Son Basin formed as a rift basin during the Oligocene period. This basin is the southernmost sedimentary basin offshore of Vietnam, located within coordinates of 6°6'-9°45'N and 106°0-109°30'E in the East Vietnam Sea. It is the largest oil and gas bearing basin in Vietnam and has a number of producing fields.

References

Bibliography