Butchers Wheel

Last updated

Butchers Wheel
Butchers Wheel.JPG
Arundel Street frontage of Butchers Wheel
Sheffield outline map with UK.svg
Red pog.svg
Location of Butchers Wheel within Sheffield
Alternative namesButcher Works
General information
TypeFormer cutlery works
Address47 Eyre Lane
Town or city Sheffield
Country United Kingdom
Coordinates 53°22′37″N1°27′59″W / 53.37693°N 1.46634°W / 53.37693; -1.46634
Construction startedc.1820
Technical details
Floor count4

Butchers Wheel or Butcher Works is a former cutlery and tool factory in Sheffield, South Yorkshire. The last of the manufacturing tenants left in 2004. The building is a listed historic site, and is now used for residential and retail purposes.

Contents

Location

The building lies in the Cultural Industries Quarter, between Sheffield City Centre and the River Sheaf. This area was made available for long-term lease by the Duke of Norfolk in the 1770s, intending high-class residential development. However, interest was low and, by the end of the century, much of the district was occupied by small housing doubling as cutlers' workshops. Later in the century, a few, larger, "integrated works" were developed, and Butchers Wheel was one of the first of these. [1]

Origins

Label from the 1820s advertising William Butcher's scissors, depicting the Eyre Lane frontage of the works at the time William Butchers advertisement 1820s.jpg
Label from the 1820s advertising William Butcher's scissors, depicting the Eyre Lane frontage of the works at the time

William and Samuel Butcher began manufacturing steel in Sheffield in the late 1810s. By 1822, William had acquired three adjacent plots of land on Eyre Lane, and constructed a small steelworks, including a purpose-built crucible steel furnace. [2] This was expanded in around 1835 to a three-storey block. [3] A former cottage on the corner of Eyre Lane and Brown Lane, long forming part of the complex, is of similar date. [4]

Growth

In the 1850s, Butcher bought up the neighbouring steam-powered grinding wheel of J. B. Raworth, incorporating this into the works. This marked a refocussing of activity on the site towards tool, blade and cutlery manufacture, with steel production moving to a new site in the Neepsend area of the city. [2]

During the 1860s, some trade unions in Sheffield used violence against non-members, in what became known as the "Sheffield Outrages". At the time, Butchers Wheel was known as a safe workplace for those who had incurred the opposition of such unions, given that access was only through a single, guarded door. [5]

During the 1860s and 1870s, two four-storey ranges were constructed, one facing Arundel Street, and the other abutting Sterling Works. In similar style to the earlier work, with red brick walls and grey slate roofs, the new buildings created a courtyard at the centre of the site. [2] These buildings were unusually austere for their date, lacking the classical detailing of contemporary works elsewhere in the city. [4] Grinding workshops were on the upper levels, the machinery's weight necessitating arched ceilings of fireproof brick up to one metre thick. [2]

In the centre of the courtyard, a tall chimney was constructed, linked by a curving wall to the edge. This removed fumes from the boiler house which supplied steam power to the entire works. According to English Heritage, power was transmitted by a system of belts and pulleys on the outside walls. In the 1950s, this was decommissioned and electric power was introduced. [3]

Decline

By the early twentieth century, works such as Butchers Wheel were dwarfed by major industrial complexes in the Lower Don Valley. Cutlery manufacture continued, although precision instrument making became increasingly important. [1] In the 1920s, Durham Duplex manufactured safety razors in part of the building. [6] In 1988, some cutlery processes still took place in the works, [3] but they gradually fell into disrepair, the last tenant moving out in 2004. [7] The building was also used for filming, including Asylum , Silent Witness and Micawber . [8]

Conversion

View into the courtyard of Butchers Wheel Butchers Wheel view into courtyard.JPG
View into the courtyard of Butchers Wheel

The works were Grade II listed in 1988, [3] then upgraded to Grade II* in 2009. [9] They were converted to residential usage in the 2000s, with part of the ground floor housing the Academy of Makers workshops and gallery, and a cafe. [10] Work was completed in 2007, the building being officially opened by the Lord Mayor of Sheffield, Arthur Dunworth. [11]

During restoration, a Bramah flush toilet was discovered, [11] as was a hand forge, complete with anvil and bellows. [2]

Related Research Articles

<span class="mw-page-title-main">Porter Brook</span> River in Sheffield, South Yorkshire, England

The Porter Brook is a river which flows through the City of Sheffield, England, descending over 1,000 feet (300 m) from its source on Burbage Moor to the west of the city to its mouth where it joins the River Sheaf in a culvert beneath Sheffield railway station. Like the other rivers in Sheffield, its steep gradient made it ideal for powering water mills and works associated with the metalworking and cutlery industries, and around 20 dams were constructed over the centuries to facilitate this. At its lower end, it is extensively culverted, but parts of it are gradually being restored to open channels, as part of a daylighting scheme for the city.

<span class="mw-page-title-main">Hathersage</span> Village in Derbyshire, England

Hathersage is a village and civil parish in the Peak District in Derbyshire, England. It lies slightly to the north of the River Derwent, approximately 10 miles (16.1 km) south-west of Sheffield.

<span class="mw-page-title-main">Kelham Island Museum</span>

The Kelham Island Museum is an industrial museum on Alma Street, alongside the River Don, in the centre of Sheffield, England. It was opened in 1982.

Malin Bridge is a suburb of the city of Sheffield, England. It is located at grid reference SK325893 and stands 2½ miles north-west of the city centre where the rivers Loxley and Rivelin meet. Malin Bridge is only a small district centred on the road bridge over the River Loxley which carries the B6076 road to Stannington ; it is surrounded by the suburbs of Hillsborough, Wisewood, Walkley and Stannington.

<span class="mw-page-title-main">Abbeydale Industrial Hamlet</span> Industrial museum in South Yorkshire, England

Abbeydale Industrial Hamlet is an industrial museum in the south of the City of Sheffield, England. The museum forms part of a former steel-working site on the River Sheaf, with a history going back to at least the 13th century. It consists of a number of dwellings and workshops that were formerly the Abbeydale Works—a scythe-making plant that was in operation until the 1930s—and is a remarkably complete example of a 19th-century works. The works are atypical in that much of the production process was completed on the same site. A more typical example of water-powered works in the area can be found at Shepherd Wheel.

<span class="mw-page-title-main">Millhouses</span> Neighbourhood in Sheffield, England

Millhouses is a neighbourhood in the City of Sheffield, England. It is located in Ecclesall ward; in the south-western portion of the city on the northwest bank of the River Sheaf. Its origins lie in a small hamlet that grew around the Ecclesall Corn Mill. It has a population of 4,424.

<span class="mw-page-title-main">Shepherd Wheel</span>

Shepherd Wheel is a working museum in a former water-powered grinding workshop situated on the Porter Brook in the south-west of the City of Sheffield, England. One of the earliest wheels on the River Porter, it is one of the few remaining—and effectively complete—examples of this kind of enterprise, one that used to be commonplace in the Sheffield area. Its 5.5 m (18 ft) diameter overshot water wheel is powered from a large dam stocked with water diverted from the Porter Brook. The workshops, dam, goit and weir are Grade II listed, and the site is a Scheduled Ancient Monument.

<span class="mw-page-title-main">Blackburn Brook</span> Stream in Sheffield, South Yorkshire, England

The Blackburn Brook is a stream in Sheffield, South Yorkshire, England which flows through the Blackburn Valley along the M1 and Ecclesfield Road and joins the River Don near the Meadowhall shopping centre. Downstream from the A61 road at Chapeltown the Blackburn Brook is defined as a main river by the Environment Agency, which requires new building development to be at least 26 feet (8 m) from the bank side as a flood defence measure and to allow access to the watercourse for maintenance.

Neepsend is a suburb of the city of Sheffield, it stands just 1 mile (1.6 km) north-west of the city centre. The main area of Neepsend covers the flood plain of the River Don from Lady's Bridge at the Wicker up to Hillfoot Bridge. The suburb falls within the Central Ward of the City. The adjacent district of Parkwood Springs is often regarded as part of the suburb.

<span class="mw-page-title-main">Globe Works</span>

The Globe Works are a former cutlery factory situated in the City of Sheffield, South Yorkshire, England on Penistone Road in the suburb of Neepsend. The Works are a Grade II* Listed Building which in the late 1980s were renovated to provide modern office space. It is part of the Kelham Island Conservation Area.

<span class="mw-page-title-main">Cornish Place</span> Building in Sheffield, Yorkshire, England

Cornish Place is a listed building situated in the Neepsend area of the City of Sheffield. The building was formerly the factory of James Dixon & Sons, a Britannia metal, Sheffield plate and Cutlery manufacturer. In the late 1990s the disused building was cleaned and converted into apartments, it is regarded as the most impressive cutlery works that still stands in Sheffield and rivals the cotton mills of Lancashire and the West Riding in terms of architectural quality and heritage. The most impressive parts of the building are the east and west ranges which have Grade II* listed status while the rest of the works have the lower Grade II rating. The "Cornish" in the buildings name is thought to derive from the manufacture of Britannia metal which is made up of 93% tin which came from Cornwall.

<span class="mw-page-title-main">Taylor's Eye Witness Works</span>

Taylor's Eye Witness Works is an industrial building on Milton Street in the Devonshire Quarter area of Sheffield city centre, South Yorkshire, England. The works are a Grade II listed building which since their foundation in 1852 have always specialised in producing kitchen and pocket knives along with various associated products. The building is believed to be the only traditional works in Sheffield which still manufactures its original products. It stands next to the Beehive Works another listed cutlery works on Milton Street.

<span class="mw-page-title-main">Leah's Yard</span> Building in South Yorkshire, England

Leah's Yard is a former collection of small industrial workshops situated on Cambridge Street in the city centre of Sheffield in South Yorkshire, England. The building has been designated as a Grade II* listed building because of its importance as an example of Sheffield's industrial heritage and is currently undergoing a significant restoration to bring it back into use.

<span class="mw-page-title-main">Beehive Works</span> Purpose-built factory in Sheffield

The Beehive Works are a purpose-built cutlery works located on Milton Street in the Devonshire Quarter area of Sheffield city centre. The works were built in stages in the second half of the 19th century and are designated as a Grade II* listed building with English Heritage stating that they are of special architectural and historic interest as an examples of buildings associated with Sheffield's metal manufacturing and metal working trades. The works stand adjacent to the Taylor's Eye Witness Works and together they make Milton Street one of the best places to gain an impression of Sheffield’s former cutlery industry.

<span class="mw-page-title-main">Portland Works</span>

Portland Works is a former cutlery works in the Highfield area of Sheffield in England. Built in 1877, it is now a Grade II* listed building and one of the last remaining working examples of a purpose built metal trades factory. In early 2013, it was bought by nearly five hundred people, through one of the country's largest community share issues. Today Portland works operates a collection of workspaces for traditional and modern craftspeople and is home to more than 30 small businesses.

<span class="mw-page-title-main">Brooklyn Works</span>

The Brooklyn Works is a former site of steel, saw and file manufacture, it is situated on Green Lane in the Kelham Island Quarter of the City of Sheffield, England. In recent years the works have been converted into residential apartments and offices. The structure is a Grade II listed building because of its importance as an example of Sheffield’s industrial heritage. The works stand adjacent to the listed industrial buildings of the Green Lane Works and Cornish Place in what has been called, “the most coherent stretch of industrial landscape in inner Sheffield”

<span class="mw-page-title-main">Well Meadow Street Crucible Furnace</span>

35 Well Meadow Street is the site of a house, attached workshops, courtyard complex and a crucible furnace. It is located in the St Vincent's Quarter of the City of Sheffield in England, it is also part of the Well Meadow Conservation Area. The buildings and furnace are grade II* listed buildings because of their importance as part of Sheffield’s industrial heritage and it is regarded as, “One of the most significant of the city’s 19th century industrial monuments”. It has now been converted into residences.

<span class="mw-page-title-main">Darnall Works</span> Steelworks in Sheffield, United Kingdom

The Darnall Works is a former steelworks in the Darnall area of Sheffield in England. The only remaining large complex of crucible furnaces, the works opened in the 1835 and were frequently extended and adapted until the late 20th century. Some of the structures at the works are listed buildings, at Grade II* and Grade II, and part of the site is a Scheduled Ancient Monument.

<span class="mw-page-title-main">Sharrow Mills</span>

Sharrow Mills are a collection of industrial buildings in Sheffield, England, which have been used for the production of snuff by the firm of Wilsons of Sharrow since the mid 18th century. The mills stands on the Porter Brook in the Sharrow Vale area of the city, just off Ecclesall Road.

<span class="mw-page-title-main">Raphael Mackeller Stores</span> Historic building in New South Wales, Australia

The Raphael Mackeller Stores is a heritage-listed former store and now museum located at 4-6 Kendall Lane in the inner city Sydney suburb of The Rocks in the City of Sydney local government area of New South Wales, Australia. It was built from 1853 to 1854 for Joseph George Raphael. It is also known as The Rocks Toy Museum, Unwin's Coach House, Coach House, and The Coachhouse. The property is owned by Property NSW, an agency of the Government of New South Wales. It was added to the New South Wales State Heritage Register on 10 May 2002.

References

  1. 1 2 18th-19th Century Industrial Grids , South Yorkshire Historic Environment Characterisation Project
  2. 1 2 3 4 5 Butcher Works Panels 1-7
  3. 1 2 3 4 Historic England. "Butchers Wheel (1246467)". National Heritage List for England . Retrieved 2 November 2010.
  4. 1 2 Ruth Harman and John Minnis, Pevsner Architectural Guides: Sheffield, pp.137-138
  5. "Trades Unions Commission", Reports from Commissioners, 1868-9, Volume 31, p.42
  6. Chemist and Druggist, vol.106 (1927), p.74
  7. Butcher Works Grant Award - Townscape Heritage Initiative Archived 4 September 2007 at the Wayback Machine , Sheffield City Council
  8. "Butcher Works wins Lotto cash", Sheffield Star , 28 March 2007
  9. "Sheffield's latest 'chosen few' listed buildings", Sheffield Star , 26 November 2009
  10. Academy of Makers
  11. 1 2 "Glimpse of the past in posh flats for future", Sheffield Star , 11 June 2007