Canadian Northern Railway Bridge (Prince Albert, Saskatchewan)

Last updated
Canadian Northern Railway Bridge
Coordinates 53°12′18″N105°45′43″W / 53.205°N 105.762°W / 53.205; -105.762
Carries Carlton Trail Railway [1]
Crosses North Saskatchewan River
Locale Prince Albert, Saskatchewan, Canada
Official nameCanadian Northern Railway Bridge
Maintained byCarlton Trail Railway
Characteristics
Design Truss bridge
MaterialSteel, wood, concrete
Total length341 metres (1,119 ft)
Piers in water8
History
Construction startSeptember 1907
Construction end1909
OpenedApril, 1909
Location
Canadian Northern Railway Bridge (Prince Albert, Saskatchewan)

The Canadian Northern Railway Bridge is a Canadian railway bridge that spans the North Saskatchewan River in Prince Albert, Saskatchewan.

Contents

Overview

The bridge was built by the Canadian Northern Railway between 1907 and 1909 with the superstructure supplied by the Hamilton Bridge Company. Originally designed as a joint railway and road bridge the bridge consisted of a centre rail line with 3.7-metre (12 ft) extensions on each side for traffic. These traffic lanes remained in use until 1960 when the nearby Diefenbaker Bridge opened. The layout of the bridge consisted of three 45-metre (146 ft) steel trusses, a 78-metre (256 ft) swing span truss and two additional 48-metre (156 ft) fixed trusses. The centre swing span was used to permit the passage of steamboats on the river and movement of logs until 1918 when the downstream sawmill shut down operations and a dam was constructed downstream in 1937. In 1939 the Department of Transport granted the railway permission to convert the moveable span into a fixed span. [2]

See also

Related Research Articles

<span class="mw-page-title-main">Albert Bridge, Brisbane</span> Bridge in Queensland, Australia

Albert Bridge is a heritage-listed railway bridge of steel truss design crossing the Brisbane River between Indooroopilly and Chelmer in the City of Brisbane, Queensland, Australia. It was designed by Henry Charles Stanley and built from 1894 to 1895 by John McCormick & Son as a replacement for an earlier bridge lost to flooding in 1893. Both bridges were named in honour of the Prince of Wales, Prince Albert. It was added to the Queensland Heritage Register on 21 October 1992.

<span class="mw-page-title-main">Swing bridge</span> Bridge which pivots around the mid-point

A swing bridge is a movable bridge that has as its primary structural support a vertical locating pin and support ring, usually at or near to its center of gravity, about which the swing span can then pivot horizontally as shown in the animated illustration to the right. Small swing bridges as found over canals may be pivoted only at one end, opening as would a gate, but require substantial underground structure to support the pivot.

<span class="mw-page-title-main">Barwon River (Victoria)</span> Perennial river in Victoria, Australia

The Barwon River is a perennial river of the Corangamite catchment, located in The Otways and the Bellarine Peninsula regions of the Australian state of Victoria.

<span class="mw-page-title-main">Burlington Northern Railroad Bridge 5.1</span> Railroad bridge in Portland, Oregon

The Burlington Northern Railroad Bridge 5.1 or BNSF Railway Bridge 5.1, also known as the St. Johns Railroad Bridge or the Willamette River Railroad Bridge, is a through truss railway bridge with a vertical lift that spans the Willamette River in Portland, Oregon, United States. Built by the Spokane, Portland and Seattle Railway (SP&S) and completed in 1908, it was originally a swing-span bridge, and its swing-span section was the longest in the world at the time. However, 81 years later the main span was converted from a swing-type to a vertical-lift type, in order to widen the navigation channel. The lift span is one of the highest and longest in the world. The bridge consists of five sections, with the two sections closest to the bank on each side fixed.

<span class="mw-page-title-main">High Level Bridge (Edmonton)</span> Bridge in Edmonton, Canada

The High Level Bridge is a bridge that spans the North Saskatchewan River in Edmonton, Alberta, Canada.

<span class="mw-page-title-main">North Saskatchewan River</span> River in Western Canada

The North Saskatchewan River is a glacier-fed river that flows from the Canadian Rockies continental divide east to central Saskatchewan, where it joins with the South Saskatchewan River to make up the Saskatchewan River. Its water flows eventually into the Hudson Bay.

<span class="mw-page-title-main">Hawkesbury River railway bridge</span> Railway bridge in New South Wales, Australia

The Hawkesbury River railway bridge is a heritage-listed railway bridge in New South Wales, Australia that carries the Main North railway line across the Hawkesbury River. It is located just north of the town of Brooklyn on the northern outskirts of Sydney. The railway bridge was to be the last link in a railway network that linked the state capitals Adelaide, Melbourne, Sydney and Brisbane and was a major engineering feat at the time. The original railway bridge was built in 1889 and replaced by the current bridge in 1946. The 1946 bridge was added to the New South Wales State Heritage Register on 2 April 1999.

<span class="mw-page-title-main">Hillsborough River Bridge</span> Bridge in Prince Edward Island, Canada

The Hillsborough River Bridge is a bridge crossing the Hillsborough River estuary between Charlottetown and Stratford in Queens County, Prince Edward Island. The current road bridge, built in 1962, replaced a 1905 rail bridge crossing the same span which was known by the same name.

<span class="mw-page-title-main">Oregon Trunk Rail Bridge</span> Railway bridge in the United States

The Oregon Trunk Rail Bridge or Celilo Bridge is a single-track railroad bridge opened in 1912 over the Columbia River in the Pacific Northwest of the United States. It consists of eight steel truss spans and several deck girder spans, and since 1957 it has included a vertical-lift section. The bridge was designed by engineer Ralph Modjeski and erected by the Missouri Valley Bridge & Iron Co., of Leavenworth, Kansas.

<span class="mw-page-title-main">Alloa Swing Bridge</span> Bridge in Throsk to Alloa, United Kingdom

The Alloa Swing Bridge was a railway swing bridge across the River Forth that connected Throsk and Alloa as part of the Alloa Railway. The structure was in use from 1885 until 1968.

Transport in Saskatchewan includes an infrastructure system of roads, highways, freeways, airports, ferries, pipelines, trails, waterways, and railway systems serving a population of approximately 1,098,352 inhabitants year-round.

<span class="mw-page-title-main">Mission Railway Bridge</span> Railway bridge across the Fraser River in British Columbia, Canada

The Mission Railway Bridge is a Canadian Pacific Railway bridge spanning the Fraser River between Mission, and Abbotsford, British Columbia, Canada.

The St. Louis Bridge is a closed Canadian traffic bridge that spans the South Saskatchewan River in St. Louis, Saskatchewan. It crosses the river from St. Louis into the Rural Municipality of Prince Albert No. 461.

<span class="mw-page-title-main">Duisburg-Hochfeld Railway Bridge</span> Railway bridge in Germany

The Duisburg–Hochfeld railway bridge spans the Rhine in the German city of Duisburg on the Duisburg-Ruhrort–Mönchengladbach line. The first bridge was built by the Rhenish Railway Company and put into operation at the end of 1873. It was replaced by a new bridge in 1927, which was badly damaged during the Second World War, but rebuilt and is still serves rail traffic between the Ruhr region and Aachen.

<span class="mw-page-title-main">Oregon Slough Railroad Bridge</span> Railroad bridge in Portland, Oregon

The Oregon Slough Railroad Bridge, also known as the BNSF Railway Bridge 8.8, is a swing-span, through truss bridge in Portland, Oregon, United States. Currently owned and operated by BNSF Railway, it crosses an anabranch of the Columbia River known as North Portland Harbor and historically as the Oregon Slough. The bridge's northern end is on Hayden Island, which, along with Tomahawk Island, forms the north shore of the channel. Completed in 1908, the two-track bridge is one of only two swing bridges surviving in Portland, which once had several bridges of that type, both for road and rail traffic. The only other remaining swing bridge in the Portland area is another rail-only bridge on the same line, BNSF's nearby Bridge 9.6, spanning the Columbia River.

<span class="mw-page-title-main">Prince Alfred Bridge</span> 1860s wrought iron truss bridge in Gundagai

The Prince Alfred Bridge is a wrought iron truss and timber beam partially-disused road bridge over the Murrumbidgee River and its floodplain at Middleton Drive, Gundagai, Cootamundra-Gundagai Regional Council, New South Wales, Australia. The heritage-listed road bridge was designed by William Christopher Bennett and built from 1864 to 1867 by Francis Bell. It is also known as Prince Alfred Bridge – Iron Road Bridge and Iron Bridge over Murrumbidgee River at Gundagai. The iron bridge is owned by Transport for NSW and the timber viaduct is owned by Crown Lands. The bridge was added to the New South Wales State Heritage Register on 5 July 2019 and on the Register of the National Estate on 21 March 1978.

<span class="mw-page-title-main">Grand Narrows Bridge</span> Canadian railway bridge

The Grand Narrows Bridge is a Canadian railway bridge crossing between Victoria County, Nova Scotia, and Cape Breton County. At 516.33 m (1,694 ft), it is the longest railroad bridge in the province. The bridge incorporates a swing span at its eastern end to permit the continued passage of marine traffic through the strait.

<span class="mw-page-title-main">Bremer River Rail Bridge</span> Railway bridge in City of Ipswich Queensland in Australia

Bremer River Rail Bridge is a heritage-listed railway bridge at off Bremer Street, North Ipswich, City of Ipswich, Queensland, Australia. It was built from 1865 to 1915. It was added to the Queensland Heritage Register on 11 December 2006.

<span class="mw-page-title-main">Alexandra Railway Bridge</span> Historic site in Queensland, Australia

Alexandra Railway Bridge is a heritage-listed railway bridge adjacent to North Street, Rockhampton, Rockhampton Region, Queensland, Australia. It was designed by Henry Charles Stanley and built from 1898 to 1899 by George Charles Willcocks. It was added to the Queensland Heritage Register on 21 October 1992.

References

  1. "Omni-Trax". Archived from the original on 2010-04-08. Retrieved 2010-04-16.
  2. Herrington, Ross. "Statement of Heritage Significance; Canadian Northern Railway Bridge; Prince Albert" (PDF). Government of Saskatchewan. Retrieved 2009-12-07.