Dart Cambridge

Last updated

Cambridge
RoleSingle seat sailplane
National origin United Kingdom
Manufacturer Dart Aircraft Ltd., Dunstable
First flight1 December 1935
Number built2
Developed from Grunau Baby

The Dart Cambridge was a single-seat competition sailplane built in the United Kingdom in the 1930s. A development of the Grunau Baby, only two were built, flying with gliding clubs.

Contents

Design and development

The Cambridge first appeared as the Zander and Weyl Cambridge, [1] making its first flight a few months before Zander and Weyl Ltd. changed its name to Dart Aircraft Ltd. Like the Slingsby Kite 1, the Cambridge was an updated version of the successful and influential Grunau Baby. It retained the Baby wing with its thick, high lift airfoil, though slightly increased in span, introduced a smoother monocoque fuselage, a tailplane of greater span and a new rudder. [2]

The wings of the Cambridge had a constant chord to about half span, outboard of which the leading edge was slightly swept and the trailing edge elliptically tapered. The ailerons were hinged on the outboard sections at a slight angle to the main spar, allowing them to be of almost constant chord. No flaps or airbrakes were fitted. The wings were mounted on a raised part of the fuselage just behind the cockpit, with single lift struts from the lower fuselage to the main spar at about one quarter span. The revised tailplane had swept leading edges and the elevators had forward-swept trailing edges, as on the Baby, but their extended span made it more pointed in plan. The fin was very narrow, with the rudder and elevator hinges at the same fuselage position. The rudder was almost semi-circular. [2]

The smooth plywood monocoque fuselage became more slender aft of the pylon carrying the wing. The cockpit was open. A combination of a single, short, fuselage-mounted skid and integral tail bumper served as an undercarriage. [2]

The Cambridge first flew on 1 December 1935. A second aircraft, known as the Cambridge 2, was a little lighter and had larger ailerons. [2]

Operational history

The first Cambridge was owned by the Duke of Grafton, who was one of the founding members of the Cambridge University Gliding Club (CUGC). [3] It was flown as a club aircraft and was entered by them into the 1939 National Soaring Contests, though without making much impression. [4] It was registered by the club after World War II in the brief period from 1949 when UK gliders appeared on the CAA register. It was de-registered by CUGC in 1953, by which time gliders no longer required CAA registration. [5] Its later history is uncertain; it was at RAF Dishforth for a while and may have been burnt before 1973. [6]

The Cambridge 2 was operated by the London Gliding Club who flew it into 6th place in the 1937 National Competitions, though it gained no prizes. [7]

Specifications (Cambridge I)

Data from Ellison [2]

General characteristics

Performance


Related Research Articles

Slingsby Eagle

The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.

Slingsby Prefect

The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.

Slingsby Skylark 3

The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.

Abbott-Baynes Scud 2

The Abbott-Baynes Scud 2 was a 1930s high-performance sailplane, built in the UK. It was a development of the intermediate-level Scud 1 with a new, high aspect ratio wing.

The Cloudcraft Dickson Primary was a single-seat primary glider designed in the United Kingdom in 1930 to be constructed from plans. Many glider clubs in the UK and the British Empire flew them in the 1930s.

The Ginn-Lesniak Kestrel is a one-off homebuilt two seat sailplane, designed in the United Kingdom in the 1950s and flown in 1969.

The Payne I.C.1 was a primary glider built by members of a University gliding club in 1930. It was finished and prepared for flight but was damaged by wind and repairs were never completed.

Cijan-Obad Orao

The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.

Siebert Sie-3

The Siebert Sie-3 is a single-seat Standard class glider designed and produced in Germany in the 1960s for club use.

Caudron C.800

The Caudron C.800, at first also known as the Epervier is a French two seat training glider, designed and first flown during World War II and put into large scale post-war production. It was the dominant basic training glider with French clubs until the 1960s and several still fly.

The Teichfuss Astore was an Italian Intermediate single-seat trainer glider designed by Luigi Teichfuss and flown in 1936. Two were built.

The RRG Professor was a very early soaring glider and the first to use a variometer for finding thermals. It was designed by Alexander Lippisch in Germany, first flying in 1928. The Professor was widely built by both flying clubs and factories.

RRG Falke

The RRG Falke of 1930 was a secondary training glider designed by Alexander Lippisch in Germany and intended to provide better performance than his earlier RRG Prüfling whilst being easier to fly because of its inherent stability. It was sold as plans for both club and commercial production and was built in Germany and abroad.

Jacobs Hols der Teufel

The Jacobs Hols der Teufel was a single seat trainer glider produced in complete and plan forms in Germany from 1928. It was built and used worldwide.

Schleicher Poppenhausen

The Schleicher Poppenhausen named after the town of Poppenhausen was a two-seat glider, available as a dual control advanced trainer, produced in Germany from 1928.

The Schneider Grunau 7 Moazagotl was a high-performance sailplane designed in Germany in 1933 specifically for fast, long distance flying using strong thermals. In 1937 it came second in the first World Gliding Championships, having previously made a flight of 300 km (186 mi).

The Schneider ESG 31 Schlesierland (Silesia) was a representative of a group of German, 16 m span, one-off gliders, built by Schneider in Grunau from 1929 to at least 1931.

The Schneider Grunau 8 was a simple, two-seat trainer glider designed and built in Germany in the early 1930s.

The Schneider ES49 is a two-seat glider trainer, designed, first flown in late August 1951 and commercially produced in Germany but later built from plans by gliding clubs in Australia. A major redesign there led to the ES49B Kangaroo.

Rotter Karakán

The Rotter Karakán or just the Karakán was a high performance Hungarian single seat sailplane. Two were built and set many national gliding records in the years before World War II.

References

  1. ↑ "The first of a series". Flight : 40. 9 January 1936.
  2. 1 2 3 4 5 Ellison, Norman (1971). British Gliders and Sailplanes. London: A & C Black Ltd. pp. 36, 103, 245. ISBN   978-0-7136-1189-2.
  3. ↑ "CUGC history". Archived from the original on 9 October 2011. Retrieved 30 July 2011.
  4. ↑ "The National Soaring Contests 1939" (PDF). Sailplane and Glider. 10 (8): 159. August 1939. Archived from the original (PDF) on 30 September 2011.
  5. ↑ "CAA records of G-ALTJ" (PDF). Archived from the original (PDF) on 14 September 2012. Retrieved 28 July 2011.
  6. ↑ "VGC newsletter" (PDF). September 1973. Archived from the original (PDF) on 30 September 2011. Retrieved 31 July 2011.
  7. ↑ "The National Competitions 1937" (PDF). Sailplane and Glider. 8 (9): 202. September 1937. Archived from the original (PDF) on 30 September 2011.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.