| DB-20 | |
|---|---|
 | |
| Role | Ground attack aircraft |
| National origin | France |
| Manufacturer | Dyle et Bacalan |
| First flight | c. September 1929 |
| Number built | 1 |
The Dyle and Bacalan DB-20 was a heavily armoured, all-metal, French ground attack aircraft built in the late 1920s.
The DB-20 was an all-metal monoplane with a mixture of steel and duralumin tube frames and duralumin skin. Designed as a ground attack aircraft, it was heavily armoured. An earlier Dyle and Bacalan twin engine design, the DB-10 had a very deep airfoil centre section between the engines which replaced the forward fuselage. The DB-20 refined this layout; on it the section between the engines was again a single structural unit but it became thinner rapidly outwards to the engines. This large structure was built on steel frames and was duralumin skinned; internal dural frames supported armoured sheets which protected the crew from ground fire. Two 310 kW (420 hp) Gnome-Rhône Jupiter 9Ad nine cylinder radial engines on the leading edge of the centre section, closely cowled but with cylinder heads exposed, were positioned at the junction between the inner section and two outer panels. These panels were straight tapered, with blunt tips and had a novel internal structure with multiple, converging beams in place of the usual one or two spars; the beams shared flanges formed by variable section boxes which replaced the ribs in forming the airfoil section under a dural skin. Narrow chord ailerons filled almost all the trailing edges outboard of the engines. [1]
The rest of the fuselage of the DB-20 came in two parts, each joined to the central section. The foreword section was a conventional flat-sided fuselage with an open nose-gunner's position, equipped with a machine gun on a flexible mounting. Like the centre section it was heavily armoured, with 3 mm (0.12 in) thick walls and a 4–5 mm (0.16–0.20 in) floor providing protection from ground fire at altitudes above 250 m (820 ft) The other three crew positions were in the central section, pilot and mechanic sitting side-by-side in an open cockpit at the leading edge and with a mid-upper gunner or observer, who could also drop bombs, close behind them. The rear fuselage section was a large, flat sided duralumin beam with frames and riveted skin. It carried a blunted triangular fin and deep balanced rudder. The DB-20's rectangular, high aspect ratio tailplane was mounted on the fin just above the fuselage, braced to it with V-struts and carrying overhung (balanced) elevators. [1] [2]
Its undercarriage was fixed and conventional with two pairs of mainwheels set 3.90 m (12 ft 10 in) apart under the engines. They were mounted on vertical V-form struts from the inner sides of the engine mountings and oblique, almost horizontal N-struts from the bottom of the fuselage. The latter were connected to a horizontal box containing the integrated oleo type shock absorbers. Its tailskid had an oil filled shock absorber. [1] [3]
The exact date of the first flight of the DB-20 is not known but it was not long before the beginning of October 1929, flown from Mérignac by Charles Descamps, the Dyle and Bacalan test pilot. First impressions of speed and manoeuvrability were good, though the armour had yet to be fitted. By March 1929, possibly with the armour in place, provisional, unofficial performance figures [2] were well below the theoretical predictions of the previous October, [1] with a speed of 180 km/h (110 mph) and a time to 1,000 m (3,300 ft) of 13 minutes. [2]
On 23 May 1929 the DB-20 was flown from Mérignac by Descamps, with their technical director Létang as passenger, to the government testing centre at Villacoublay. Fuel consumption was higher than anticipated and they had to put down in a field about 15 km (9.3 mi) from their destination. Nonetheless, they arrived safely after about 6 hours from departure. [4] There are no known reports on the outcome of these tests, or indeed on any other later activity of the DB.20.
Data from Les Ailes October 1928. [1] Performance figures were calculated.
General characteristics
Performance
The Dyle et Bacalan DB-70 was a large three engine French airliner with a thick airfoil centre section which accommodated the passengers. Two fuselages, part of the centre section at the front but distinct further aft, carried the empennage. First flown in 1929, only one was built.
The Dyle et Bacalan DB-10 was a heavy night bomber, designed in France and flown in 1926. It was a twin engine, high wing, metal frame monoplane, distinguished by a very thick centre section wing which formed the forward fuselage and housed the engines.
The Potez 40 was a French three-engine, braced high-wing monoplane designed and built in response to a French government programme for colonial transport and policing aircraft duties.
The Descamps 17 A.2 was a two-seat reconnaissance fighter built under a French government programme of 1923. Two versions, with different engines, were tested and six examples were built under licence by Caudron as the Caudron C.17 A.2.
The Delanne 11 was a French two seat touring aircraft. Only one was built.
The SAB DB-80 and SAB DB-81 were single-engine, all-metal French light transports aimed at the air mail market whilst carrying two passengers. Identical apart from their engines, they flew in mid-1930.
The Lorraine-Hanriot LH.70 or S.A.B. LH.70 was a French trimotor designed to a 1930 government programme for a colonial policing aircraft. Only two were built.
The Bassou Rubis (Ruby) was a low power, robust French aircraft designed for basic training and touring.
The Peitz 101, aka Peitz Avionette, was a French, amateur-built, all-metal light aircraft, first flown during the winter of 1931–32.
The Dewoitine D.430 was a three-engine, high-wing monoplane designed for policing and other roles in France's colonies. It did not go into production.
The Nieuport-Delage NiD 580 R.2 was a contender for a French government contract for a long range, two seat reconnaissance aircraft, issued in 1928. There were eight prototypes in the 1931-2 contest and the NiD 580 was not selected for production.
The Guillemin JG.40 was designed and built to meet a French government requirement for a small air ambulance capable of operating in the colonies. Two were completed and performed well but the JG.40 did not reach production.
The Lorraine-Hanriot LH.21S was designed and built in 1930 to meet a French government requirement for a small air ambulance capable of operating in the colonies. It did not reach production.
The Bréguet Colibri was a low power, single seat French monoplane designed to compete in a 1923 newspaper-sponsored contest between such aircraft. Only one was built.
The Hanriot H.25 was a French, single-engined, six passenger airliner built in 1926. Only one was flown.
The Skraba S.T.3 was a two-seat Polish biplane built in 1928. It was the first all-metal aircraft designed in Poland; only one was completed.
The Hanriot H.46 Styx was a French, single-engined, parasol wing aircraft which could equally be configured for training, liaison or ambulance roles; in the latter form it was able to accept a patient on a stretcher. Several different engines were fitted and flown but the type did not reach production.
The Morane-Saulnier MS.152 was a French multi-purpose aircraft built in 1928. It did not go into production.
The Morane-Saulnier MS.221 was a French fighter aircraft, built in 1928 to compete for a government contract in the "Jockey" programme. Two were built, one of which was progressively modified to increase its speed, but in 1930 the light fighter concept was abandoned.
The Albert A-10 was a four-seat French transport aircraft which could be rapidly converted into an air ambulance. Two or three examples were built between 1929 and 1932, using at least two different engines, but neither variant reached production.
 | Wikimedia Commons has media related to Dyle et Bacalan DB-20 . |