EMD SD39 | |||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||
| |||||||||||||||||||||||||
| |||||||||||||||||||||||||
|
The SD39 is a model of 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division between August 1968 and May 1970. 54 were built for American railroads. [1]
In 1966, EMD replaced all their old models with new ones having the new 645 diesel. These included six-axle models SD38, SD40, SDP40 and SD45; the SD39 was added in 1968. All shared standard components including the frame, cab, traction alternator, trucks, traction motors, and air brakes. The difference was the power output: SD38 = 2,000 hp (1,490 kW) from a non-turbocharged V16, SD39 = 2,300 hp (1,720 kW) from a turbocharged V12, SD40 = 3,000 hp (2,240 kW) from a turbocharged V16, and SD45 = 3,600 hp (2,680 kW) from a turbocharged V20. The SD39 had the smallest prime mover and therefore had the most unused space above the frame, inside the hood between the main generator and electrical cabinet, and outside in large end "porches". [1]
A variant was the SDL39, ordered by the Milwaukee Road. Shorter and lighter than a stock SD39, these minimized weight per axle. [1]
Railroad | Quantity | Road numbers | Notes |
---|---|---|---|
Atchison, Topeka and Santa Fe Railway | 20 | 4000-4019 | All to BNSF and then sold to LTEX in 2010. |
Illinois Terminal Railroad | 6 | 2301-2306 | 4 went to Guilford Rail System, all have been scrapped. |
Minneapolis, Northfield and Southern Railway | 2 | 40-41 | #40 as of August 25, 2021 used by Progressive Rail, Inc., #41 has been scrapped. |
Southern Pacific Transportation Company | 26 | 5300-5325 | To Union Pacific and then to leasers and shortlines. |
Total | 54 |
On January 1, 1972, EMD debuted Dash 2 models. No official SD39-2s were built, though the model was catalogued. Some SD39s were rebuilt to Dash 2 specifications, however, and received the SD39-2 designation. Also, BNSF has re-designated some of their SD40-2 locomotives as 'SD39-2s'; it is unknown at this time what mechanical changes have been made to these locomotives.[ citation needed ]
Some of the SD39 model were subsequently resold to other operators including:
A road switcher locomotive is a type of railroad locomotive designed to both haul railcars in mainline service and shunt them in railroad yards. Both type and term are North American in origin, although similar types have been used elsewhere.
The EMD SD40-2 is a 3,000-horsepower (2,200 kW) C-C diesel-electric locomotive built by EMD from 1972 to 1989.
The EMD Dash 2 is a line of diesel-electric locomotives introduced by General Motors' Electro-Motive Division (EMD) on January 1, 1972. Designations of these models were those of the former models with "-2" added. They retained the basic specifications of the earlier models in terms of power output and most other features, but introduced a number of improvements to the locomotives' internal systems, specifically the electrical systems and the trucks of the locomotives. These were intended to improve availability, efficiency, and ease of maintenance.
The EMD SD50 is a 3,500-horsepower (2,610 kW) diesel-electric locomotive built by General Motors Electro-Motive Division. It was introduced in May 1981 as part of EMD's "50 Series"; production ceased in January 1986. The SD50 was a transitional model between EMD's Dash 2 series which was produced throughout the 1970s and the microprocessor-equipped SD60 and SD70 locomotives. A total of 431 were built.
The EMD SD24 was a 2,400 hp (1,800 kW) six-axle (C-C) diesel-electric locomotive built by General Motors' Electro-Motive Division of La Grange, Illinois between July 1958 and March 1963. A total of 224 units were built for customers in the United States, comprising 179 regular, cab-equipped locomotives and 45 cabless B units. The latter were built solely for the Union Pacific Railroad.
The EMD 645 is a family of diesel engines that was designed and manufactured by the Electro-Motive Division of General Motors. While the 645 series was intended primarily for locomotive, marine and stationary engine use, one 16-cylinder version powered the 33-19 "Titan" prototype haul truck designed by GM's Terex division
An EMD SD38AC is a 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division between June and October 1971. This model is an SD38 with an AR10 alternating current alternator instead of the SD38's normal direct current generator. It produces 2,000 horsepower (1,500 kW) from a 16-cylinder EMD 645E roots blown prime mover. It came equipped with or without dynamic brakes. This locomotive shares a common frame with the SD38, SD39, SD40 and SD45. The SD38AC was a transition between the SD38 and its successor, the SD38-2. 15 examples of this model were built; 6 for B&LE, 8 for DMIR and one for BC Hydro.
The EMD GP39 is a 4-axle diesel-electric locomotive built by General Motors Electro-Motive Division between June 1969 and July 1970. The GP39 was a derivative of the GP38 equipped with a turbocharged EMD 645E3 12-cylinder engine which generated 2,300 hp (1.72 MW).
An EMD GP20 is a 4-axle diesel-electric locomotive built by General Motors' Electro-Motive Division between November 1959 and April 1962. Power was provided by an EMD 567D2 16-cylinder turbocharged engine which generated 2,000 horsepower (1,500 kW). EMD was initially hesitant to turbocharge their 567-series diesel engine, but was spurred on to do so following successful tests made by Union Pacific in the form of UP's experimental Omaha GP20 units. 260 examples of EMD's production locomotive model were built for American railroads.
The EMD SD38 is a 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division between May 1967 and October 1971. It had an EMD 645 16-cylinder engine generating 2,000 horsepower (1.5 MW), compared to the turbocharged EMD 645E3 V-16 engine that produced 3000 horsepower. Aside from the 3-axle trucks and a longer frame to accommodate them, the SD38 was identical to the GP38; the SD38 had the same frame as the SD39, SD40 and SD45. 52 were built for American railroads, one was built for a Canadian railroad, four were exported to a mining firm in Jamaica and seven were exported to a mining firm in Venezuela. The SD38 was succeeded by a Dash 2 version called the EMD SD38-2.
The EMD SD40 is an American 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division between January 1966 and August 1972. 1,268 locomotives were built between 1966 and 1972. In 1972, an improved version with new electronics was developed and marketed as a new locomotive, the SD40-2.
An SDP40 is a 6-axle passenger diesel-electric locomotive built by General Motors Electro-Motive Division (EMD) between June 1966 and May 1970.
The SD45 is a six-axle diesel-electric locomotive class built by General Motors Electro-Motive Division between 1965 and 1971. It has an EMD 645E3 twenty-cylinder engine generating 3,600 hp (2,680 kW) on the same frame as the SD38, SD39, SD40, and SDP40. As of 2023, most SD45s have been retired, scrapped or rebuilt to SD40-2 standards.
The EMD SD38-2 is a model of six-axle diesel-electric locomotive built by General Motors Electro-Motive Division (EMD) from 1972 to 1979. EMD built 90 of these medium road-switchers, which were used in both yard and mainline roles. Part of the EMD Dash 2 line, the SD38-2 was an upgraded SD38 with modular electronic control systems, HT-C trucks, and many other detail improvements. The locomotive's power was provided by an EMD 16-645E 16-cylinder engine, which could generate 2,000 horsepower. These units were constructed with either 3,200 or 4,000 US gal fuel tanks and were available with or without dynamic brakes. It shared the same 64-foot-8-inch (19.71 m) frame as the SD40-2 and SD45-2, which gives it a length over couplers of 68 feet 10 inches (20.98 m).
The EMD SD45-2 is a 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division (EMD). EMD built 136 locomotives between 1972 and 1974, primarily for the Atchison, Topeka and Santa Fe Railway (ATSF). The SD45-2 was an improved version of the EMD SD45; the primary visual difference is the lack of flared radiators on the SD45-2.
The EMD SDL39 is a model of 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division between March 1969 and November 1972. Power was provided by the EMD 645E3 12-cylinder engine as used in the EMD GP39 which generated 2,300 horsepower. The unit was built on a short 55-foot-2-inch (16.81 m) frame with C-C export trucks, barely tipping the scales at 250,000 pounds (110,000 kg) and managing a light-footed axle-loading of just 20.8 short tons per axle.
The SD45T-2 is a model of diesel-electric locomotive built by EMD for the Southern Pacific Railroad. Like the later SD40T-2 it is colloquially nicknamed a tunnel motor. 247 total units were produced from February 1972 to June 1975, including 84 for SP's subsidiary Cotton Belt. From April 1986 to December 1989, 126 were rebuilt and re-designated as SD45T-2R, including 24 for Cotton Belt.
The EMD GP49 is a 4-axle diesel locomotive built by General Motors Electro-Motive Division. Power was provided by an EMD 645F3B 12-cylinder engine which generated 2,800 horsepower (2.09 MW). The GP49 was marketed as one of four models in the 50 series introduced in 1979. The 50 series includes GP/SD49 and GP/SD50. Both the GP and SD50 were relatively popular with a total of 278 GP50s and 427 SD50s built. The SD49 was advertised but never built and a total of nine GP49s were built.
The EMD SD22ECO is a 2,150 hp (1,600 kW) C-C diesel-electric locomotive rebuilt by Electro-Motive Diesel. It is, along with the GP22ECO, primarily the application of a conversion kit to an existing EMD SD40-type locomotive. This involves replacing the existing prime mover with an EPA Tier-II-compliant turbocharged V8 710G3A-T2, with electronic fuel injection. The prime mover is mated to an AR10 alternator for traction power, a CA6 alternator for control power, and a computerized control system. This conversion does not alter the external appearance of the locomotive.
The Progress Rail PR30C is a 3,005 hp (2,240 kW) C-C diesel-electric locomotive rebuilt by Progress Rail. It is the result of a conversion to an existing EMD SD40-2-type locomotive. This involves replacing the existing prime mover with an EPA Tier-II-compliant turbocharged V16 Caterpillar 3516. The prime mover is equipped with an additional exhaust treatment system, in a large box mounted at hood top level, in front of the radiator section.