EchoLink

Last updated
EchoLink working on Windows Vista. EcholinkScreenshot.png
EchoLink working on Windows Vista.

EchoLink is a computer-based amateur radio system distributed free of charge that allows radio amateurs to communicate with other amateur radio operators using Voice over IP (VoIP) technology on the Internet for at least part of the path between them. It was designed by Jonathan Taylor, a radio amateur with call sign K1RFD. [1] Taylor has been the system engineer and administrator since 2002.

Contents

The system allows reliable worldwide connections to be made between radio amateurs, greatly enhancing amateur radio's communications capabilities. [2] In essence it is the same as other VoIP applications (such as Skype), but with the unique addition of the ability to link to an amateur radio station's transceiver. Thus any low-power handheld amateur radio transceiver which can contact a local EchoLink node (a node is an active EchoLink station with a transceiver attached) can then use the Internet connection of that station to send its transmission via VoIP to any other active EchoLink node, worldwide. No special hardware or software is required to relay a transmission via an EchoLink node.

Before using the system, it is necessary for a prospective user's callsign to be validated. [3] The EchoLink system requires that each new user provide positive proof of license and identity before his or her callsign is added to the list of validated users. There is no cost for this service, and it ensures that this system is used only by licensed amateur radio operators.

The software is written to run on 32-bit and 64-bit versions of Microsoft Windows. Another edition of the software runs on Apple mobile devices (iPhone, iPod touch, and iPad), and is available from the Apple App Store. [4] Qtel is an opensource version of the software available in many Linux repositories. [5] An Android version is available on Google Play and several other Android app repositories. In late 2023, EchoLink released a cross-platform Web browser based edition (EchoLink Web), which runs entirely within a Web browser. [6]

Uses

Radio amateurs using the EchoLink software can operate it in one of two modes:

Radio amateurs without the EchoLink software or a computer connected to the Internet can take advantage of the EchoLink network if they are within radio range of a sysop mode EchoLink station. It is also possible to link a sysop mode EchoLink station to a local repeater, further enhancing the communication possibilities.

Smartphone editions

Editions of EchoLink are also available for two of the major smartphone platforms. In February 2010, an edition of EchoLink was released for the Apple iPhone, iPad, and iPod Touch on the App Store. In August 2010, an edition of EchoLink was released for the Android platform, and is now available in the Google Play Store. Both the iOS and Android editions were created by Jonathan Taylor (K1RFD), the author of the original Windows edition.

Open source software packages that are largely compatible with EchoLink are available for Macintosh (EchoMac [7] and EchoHam [8] ) and Linux (echoLinux or SvxLink/Qtel).

SvxLink Server is an alternative implementation for Linux. It only implements sysop mode. [9]

EchoIRLP is a software add on for IRLP which enables an IRLP node to operate as a sysop mode EchoLink station.

Amateurs running the app_rpt extension for Asterisk can also enable EchoLink functionality by loading an EchoLink channel driver. This option is included in packages such as hamvoip that run on the AllStarLink network. [10]

The EchoLink software, which is designed to run on Microsoft Windows, has also been known to work on several Linux builds as well if loaded through Wine. [11]

See also

Related Research Articles

<span class="mw-page-title-main">Packet radio</span> Form of amateur radio data communications using the AX25 protocol

In digital radio, packet radio is the application of packet switching techniques to digital radio communications. Packet radio uses a packet switching protocol as opposed to circuit switching or message switching protocols to transmit digital data via a radio communication link.

<span class="mw-page-title-main">Wireless LAN</span> Computer network that links devices using wireless communication within a limited area

A wireless LAN (WLAN) is a wireless computer network that links two or more devices using wireless communication to form a local area network (LAN) within a limited area such as a home, school, computer laboratory, campus, or office building. This gives users the ability to move around within the area and remain connected to the network. Through a gateway, a WLAN can also provide a connection to the wider Internet.

Voice over Internet Protocol (VoIP), also known as IP telephony, refers to a set of technologies used for voice communication sessions over Internet Protocol (IP) networks, such as the Internet. VoIP enables voice calls to be transmitted as data packets, facilitating various methods of voice communication, including traditional applications like Skype, Microsoft Teams, Google Voice, and VoIP phones. Regular telephones can also be used for VoIP by connecting them to the Internet via analog telephone adapters (ATAs), which convert traditional telephone signals into digital data packets that can be transmitted over IP networks.

AX.25 is a data link layer protocol originally derived from layer 2 of the X.25 protocol suite and designed for use by amateur radio operators. It is used extensively on amateur packet radio networks.

<span class="mw-page-title-main">Rhythmbox</span> Free and open source audio player

Rhythmbox is a free and open-source audio player software, tag editor and music organizer for digital audio files on Linux and Unix-like systems.

The Internet Radio Linking Project, also called IRLP links amateur radio stations around the world by using Voice over IP (VoIP). Each gateway consists of a dedicated computer running custom software that is connected to both a radio and the Internet. This arrangement forms what is known as an IRLP Node. Since all end users communicate using a radio as opposed to using a computer directly, IRLP has adopted the motto "Keeping the Radio in Amateur Radio".

Safe mode is a diagnostic mode of a computer operating system (OS). It can also refer to a mode of operation by application software. Safe mode is intended to help fix most, if not all, problems within an operating system. It is also widely used for removing rogue security software.

<span class="mw-page-title-main">VoIP phone</span> Phone using one or more VoIP technologies

A VoIP phone or IP phone uses voice over IP technologies for placing and transmitting telephone calls over an IP network, such as the Internet. This is in contrast to a standard phone which uses the traditional public switched telephone network (PSTN).

Radio over Internet Protocol, or RoIP, is similar to Voice over IP (VoIP), but augments two-way radio communications rather than telephone calls. From the system point of view, it is essentially VoIP with push-to-talk. To the user it can be implemented like any other radio network.

<span class="mw-page-title-main">Amateur radio repeater</span> Combined receiver and transmitter

An amateur radio repeater is an electronic device that receives a weak or low-level amateur radio signal and retransmits it at a higher level or higher power, so that the signal can cover longer distances without degradation. Many repeaters are located on hilltops or on tall buildings as the higher location increases their coverage area, sometimes referred to as the radio horizon, or "footprint". Amateur radio repeaters are similar in concept to those used by public safety entities, businesses, government, military, and more. Amateur radio repeaters may even use commercially packaged repeater systems that have been adjusted to operate within amateur radio frequency bands, but more often amateur repeaters are assembled from receivers, transmitters, controllers, power supplies, antennas, and other components, from various sources.

D-STAR is a digital voice and data protocol specification for amateur radio. The system was developed in the late 1990s by the Japan Amateur Radio League and uses minimum-shift keying in its packet-based standard. There are other digital modes that have been adapted for use by amateurs, but D-STAR was the first that was designed specifically for amateur radio.

<span class="mw-page-title-main">Jitsi</span> Videoconferencing and messaging software

Jitsi is a collection of free and open-source multiplatform voice (VoIP), video conferencing and instant messaging applications for the Web platform, Windows, Linux, macOS, iOS and Android. The Jitsi project began with the Jitsi Desktop. With the growth of WebRTC, the project team focus shifted to the Jitsi Videobridge for allowing web-based multi-party video calling. Later the team added Jitsi Meet, a full video conferencing application that includes web, Android, and iOS clients. Jitsi also operates meet.jit.si, a version of Jitsi Meet hosted by Jitsi for free community use. Other projects include: Jigasi, lib-jitsi-meet, Jidesha, and Jitsi.

GT Power is a bulletin board system (BBS) and dial-up telecommunications/terminal application for MS-DOS. It was first introduced in the 1980s by P & M Software, founded by Paul Meiners. GT Power can be used both to host a BBS as well as to connect to other BBS systems via its full-featured dial-up "terminal mode". GT Power was a shareware package that required a registration fee in order to access its proprietary network mail transport/handling software and, by default, the GT Power Network. The software is distributed in two "flavors": a terminal-only version, nicknamed GTO, and the full-featured host and terminal version.

Rocrail is a freeware software package for controlling a model train layout from one or more computers. Users can run trains directly from a computer, or have some run automatically with manual control for any others.

<span class="mw-page-title-main">Jami (software)</span> Distributed multimedia communications platform

Jami is a SIP-compatible distributed peer-to-peer softphone and SIP-based instant messenger for Linux, Microsoft Windows, macOS, iOS, and Android. Jami was developed and maintained by the Canadian company Savoir-faire Linux, and with the help of a global community of users and contributors, Jami positions itself as a potential free Skype replacement.

<span class="mw-page-title-main">Parallel Logic Radio Interface</span> Set of circuits of interest to radio amateurs

PLRI (Parallel Logic Radio Interface) is a set of circuits of interest to radio amateurs Amateur Radio (hams). These circuits are fully compatible with IRLP (Internet Radio Linking Project). IRLP is trademarked by Dave Cameron.

<span class="mw-page-title-main">HamSphere</span>

HamSphere is a subscription-based internet service that simulates amateur radio communication using VoIP connections over the Internet. The simulator allows licensed radio amateurs and unlicensed enthusiasts to communicate with one another using a simulated ionosphere. It was designed by Kelly Lindman, a radio amateur with call sign 5B4AIT.

<span class="mw-page-title-main">Waverley Amateur Radio Society</span>

The Waverley Amateur Radio Society (WARS) is an amateur radio society based in Rose Bay, a suburb of Sydney, New South Wales, Australia which operates under the call sign VK2BV. The society was founded in 1919 and is the oldest continuously licensed amateur radio club in Australia.

<span class="mw-page-title-main">Fldigi</span> Software that allows a sound card to be used as a data modem

Fldigi is a free and open-source program which allows an ordinary computer's sound card to be used as a simple two-way data modem. The software is mostly used by amateur radio operators who connect the microphone and headphone connections of an amateur radio SSB or FM transceiver to the computer's headphone and microphone connections, respectively.

<span class="mw-page-title-main">M17 (amateur radio)</span> Open source amateur radio mode

M17 is a digital radio modulation mode developed by Wojciech Kaczmarski et al. M17 is primarily designed for voice communications on the VHF amateur radio bands, and above. The project received a grant from the Amateur Radio Digital Communications in 2021 and 2022. The protocol has been integrated into several hardware and software projects. In 2021, Kaczmarski received the ARRL Technical Innovation Award for developing an open-source digital radio communication protocol, leading to further advancements in amateur radio.

References

  1. http://www.arrl.org/files/file/Technology/tis/info/pdf/voip.pdf [ bare URL PDF ]
  2. "Introducing EchoLink". www.echolink.org.
  3. "FAQs - Validation". echolink.org.
  4. "FAQs - Installation". echolink.org.
  5. "QTEL". svxlink.org.
  6. "FAQ - EchoLink Web". echolink.org.
  7. "EchoMac - an Echolink client for Macintosh OS X". echomac.sourceforge.net.
  8. "EchoHam". AppHugs.
  9. "SvxLink". 20 October 2014.
  10. "Asterisk Allstar on the Raspberry Pi 2/3/4". hamvoip.org.
  11. "Echolink reference on the Wine Database". 31 January 2008.