This article needs additional citations for verification .(December 2008) |
An elliptical trainer or cross-trainer is a stationary exercise machine used to stair climb, walk, or run without causing excessive pressure to the joints, hence decreasing the risk of impact injuries.[ citation needed ] For this reason, people with some injuries can use an elliptical to stay fit, as the low impact affects them little. Elliptical trainers offer a non-impact cardiovascular workout that can vary from light to high intensity based on the speed of the exercise and the resistance preference set by the user.
Elliptical trainers first entered the market in the 1990s, invented by Precor. [1]
Most elliptical trainers work the user's upper and lower body (although some models do not have moving upper body components). Though elliptical trainers are considered to be minimal-impact, they are an example of a weight-bearing form of exercise. [2] They can be self-powered by user-generated motion or need to be plugged in for adjustment of motion and/or for supplying their electronic consoles and resistance systems.
Elliptical riders use an arrangement of links known to the kinematics community as four-bar linkage. The pedals are attached to the floating link referred to as the coupler. The first published work on the subject of elliptical path generation is given in 1988 by researchers at Purdue University in which the path of a point on the floating link is shown to approximately follow an elliptical shape. [3] In 1995, Precor introduced the Elliptical Fitness Crosstrainer (EFX), [4] the first piece of exercise equipment to allow the foot to roll from heel to toe just like in running. Its patented mechanism weds a rear flywheel with a forward foot pedal, creating a smooth, elliptical movement. This is key to foot comfort and reduces numbing of the foot experienced on other stationary cardio equipment.[ citation needed ]
This approach is classified as "low impact" as it keeps a person's heels in contact with the pedals, reducing muscle and tendon stress.[ citation needed ]
There are three types of elliptical trainers, categorized by the location of the motor or "drive." The oldest elliptical design is the "rear drive" type, the second generation elliptical design is the "front-drive" type, and the most recent elliptical design is the "center-drive" type.
On some models, the incline of sloping roller-ramps beneath the pedal-links can be adjusted to produce varying pedal-motion paths. An adjustable ramp, whether automatic or manual, alters the angle of the elliptical path which can vary hip actuation as well as vary the stride length. This can allow a user to alter their workout to target various lower body muscles. In addition to the lower body, elliptical workouts are known to target the whole body. While mostly targeting the glutes, hamstrings and calves, ellipticals can also target the core, triceps, biceps and shoulders depending on the workout. Some elliptical trainers even enable exercisers to use preset programs to automatically vary incline, resistance, and stride length over the course of a workout. In addition, some elliptical trainers can be driven in either a forward or a reverse direction.
Elliptical trainers are primarily driven by the user's legs. Most models are combination designs. They feature handle-levers attached to each pedal-link. This design allows the arms to bear some of the load and provides a secondary source of driving power. The user grips the handles below shoulder height and pushes and pulls the arms while shuffling the feet back and forth within elliptically-shaped paths. Thus the oscillating handle-motions are dependent on – and coordinated with – the constrained pedal-motions. Some poorly designed machines are too dependent on the user's leg power, producing excessive handle speeds due to mechanical ratios that do not provide enough mechanical advantage to the handle-levers. Consequently, such machines might feel to the user as if their arms are simply "going along for the ride" rather than performing a meaningful portion of the work. Better models of elliptical trainers offer a more balanced – or even harmonious – combination of arm and leg exercise in useful, proper ratios.
Some manufacturers produce durable commercial models made to withstand frequent use in a fitness club environment, at prices that can be in excess of $4,000. Inexpensive models are available for home use at prices starting around $200. More expensive elliptical trainers – especially commercial machines – are more likely to offer more features such as extensive programs and better adjustment options.
An elliptical cross trainer is comparable to a treadmill in its exertion of leg muscles and the heart.[ citation needed ] Ellipticals produce an intermediate range of leg motion between that of stationary bikes and treadmills. [5]
In a 2010 study, 9 males and 9 females were chosen to exercise at the same RPE on the treadmill or elliptical and found that energy expenditure and oxygen consumption were the same in the two forms of exercise equipment. [6] Thomas Altena, a professor of nutritional and exercise physiology at the University of Missouri, measured oxygen retention, lactic acid build-up, heart rate, and perceived rate of exertion to compare treadmills and elliptical trainers, [7] finding that the "physiological responses associated with elliptical exercise were nearly identical to treadmill exercise". [7] However, it is important that the resistance set on the elliptical machine is at a relatively high setting, depending on the user. [8]
Since users do not take their feet off the pedals, there is no footfall noise in contrast with other fitness trainers such as treadmills.
A 2002 study by the University of Idaho [9] shows that varying the stride length on the elliptical trainer can activate a wider range of muscle groups. The study also showed that as the stride is lengthened, more calories are burned without any higher rate of perceived exertion by the user. The findings of this study support the claims made regarding the changeable stride length function feature on some newer ellipticals.
Though procedures vary between various models, most are similar in that the user adopts a comfortable standing position with his or her spine in a neutral position (with a straight back). The user aligns their knees, hips and ankles; and ensures that their weight is distributed between the heels and the balls of the feet. The user grips the handrails in a smooth controlled motion, striding either in a forward or reverse motion, working through a full natural range of movement smoothly and continuously.
An indoor rower, or rowing machine, is a machine used to simulate the action of watercraft rowing for the purpose of exercise or training for rowing. Modern indoor rowers are often known as ergometers because they measure work performed by the rower. Indoor rowing has become established as a sport, drawing a competitive environment from around the world. The term "indoor rower" also refers to a participant in this sport.
A treadmill is a device generally used for walking, running, or climbing while staying in the same place. Treadmills were introduced before the development of powered machines to harness the power of animals or humans to do work, often a type of mill operated by a person or animal treading the steps of a treadwheel to grind grain. In later times, treadmills were used as punishment devices for people sentenced to hard labour in prisons. The terms treadmill and treadwheel were used interchangeably for the power and punishment mechanisms.
Indoor cycling, often called spinning, is a form of exercise with classes focusing on endurance, strength, intervals, high intensity and recovery, and involves using a special stationary exercise bicycle with a weighted flywheel in a classroom setting. When people took cycling indoors in the late 19th century, whether for reasons of weather or convenience, technology created faster, more compact and efficient machines over time. The first iterations of the stationary bike ranged from the vertical Gymnasticon to regular bicycles on rollers.
A stationary bicycle is a device used as exercise equipment for indoor cycling. It includes a saddle, pedals, and some form of handlebars arranged as on a (stationary) bicycle.
Body for Life (BFL) is a 12-week nutrition and exercise program, and also an annual physique transformation competition. The program utilizes a low-fat high-protein diet. It was created by Bill Phillips, a former competitive bodybuilder and previous owner of EAS, a manufacturer of nutritional supplements. It has been popularized by a bestselling book of the same name.
The leg press is a compound weight training exercise in which the individual pushes a weight or resistance away from them using their legs. The term leg press machine refers to the apparatus used to perform this exercise. The leg press can be used to evaluate an athlete's overall lower body strength. It can help to build squat strength. If performed correctly, the inclined leg press can help build knees that can handle heavier free weights, on the other hand, it also carries a risk of serious damage since locked knees can bend the wrong direction throughout the exercise.
Fitness game, exergame, and gamercise are terms used for video games that are also a form of exercise. Fitness games rely on technology that tracks body movement or reaction. The genre has been used to challenge the stereotype of gaming as a sedentary activity, and promoting an active lifestyle among gamers. Fitness games are seen as evolving from technology aimed at making exercise more fun.
Exercise equipment is any apparatus or device used during physical activity to enhance the strength or conditioning effects of that exercise by providing either fixed or adjustable amounts of resistance, or to otherwise enhance the experience or outcome of an exercise routine.
An exercise machine is any machine used for physical exercise. These range from simple spring-like devices to computerized electromechanical devices to recirculating-stream swimming pools. Most exercise machines incorporate an ergometer. An ergometer is an apparatus for measuring the work a person exerts while exercising as used in training or cardiac stress tests or other medical tests.
A weight machine is an exercise machine used for weight training that uses gravity as the primary source of resistance and a combination of simple machines to convey that resistance to the person using the machine. Each of the simple machines changes the mechanical advantage of the overall machine relative to the weight.
The Nike+iPod Sports Kit is an activity tracker device, developed by Nike, Inc., which measures and records the distance and pace of a walk or run. The Nike+iPod consists of a small transmitter device attached to or embedded in a shoe, which communicates with either the Nike+ Sportband, a receiver plugged into an iPod Nano. It can also work directly with a 2nd Generation iPod Touch, iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, The Nike+iPod was announced on May 23, 2006. On September 7, 2010, Nike released the Nike+ Running App on the App Store, which used a tracking engine powered by MotionX that does not require the separate shoe sensor or pedometer. This application works using the accelerometer and GPS of the iPhone and the accelerometer of the iPod Touch, which does not have a GPS chip. Nike+Running is compatible with the iPhone 6 and iPhone 6 Plus down to iPhone 3GS and iPod touch. On June 21, 2012, Nike released Nike+ Running App for Android. The current app is compatible with all Android phones running 4.0.3 and up.
A health club is a place that houses exercise equipment for the purpose of physical exercise.
The following outline is provided as an overview of and topical guide to exercise:
Human power is the rate of work or energy that is produced from the human body. It can also refer to the power of a human. Power comes primarily from muscles, but body heat is also used to do work like warming shelters, food, or other humans.
NordicTrack is an American company that manufactures treadmills, strength training equipment, ellipticals, exercise bikes, and accessories. It is best known for its Nordic ski machines, low-impact exercisers, ellipticals, and incline trainers. NordicTrack is owned and managed by iFIT Health & Fitness Inc. and is headquartered in Logan, Utah. The company has been manufacturing exercise equipment since 1975.
The Arc Trainer is a stationary, non-impact exercise machine, and is a registered trademark of Cybex International, Inc. The Arc Trainer is manufactured in Owatonna, MN.
The Precor USA StretchTrainer is a piece of exercise equipment used to improve flexibility, coordination and athletic performance. The seated design ensures that users are kept in the correct position to stretch muscle groups.
StreetStrider is the brand name for a mobile elliptical trainer. It was developed by David W. Kraus, who wrote the patent for the device. The StreetStrider duplicates the motion of a stationary elliptical trainer in a mobile device. The rider achieves a full-body weight-bearing low-impact high-cardiovascular workout while moving outdoors. With a branded trainer stand, adult StreetStrider models can be fashioned into stationary elliptical trainers, enabling indoor use during inclement weather. The StreetStrider can be used for physical fitness, weight loss, physical therapy, human-powered transport, and outdoor adventure.
ElliptiGO, Inc. is a manufacturer of stand-up and elliptical bicycles headquartered in Solana Beach, California. Elliptical bikes combine the motion of an indoor elliptical trainer with the outdoor mobility of a traditional bicycle. They are a type of treadle bicycle, powered by treadles, rather than pedals mounted directly on the crank arms. Treadle drive trains were historically intermediate between highwheeled penny-farthings and the bicycle chain; Elliptigos, like some other later treadle bicycles, use both treadles and a chain.
Peloton Interactive, Inc. is an American exercise equipment and media company based in New York City. The company's products are stationary bicycles, treadmills, and indoor rowers equipped with Internet-connected touch screens that stream live and on-demand fitness classes through a subscription service. The equipment includes built-in sensors that track metrics such as power output, providing users with real-time feedback on their performance and leaderboard rankings to compete with other users.