This article needs additional citations for verification .(June 2010) |
GNR No. 1 class 4-2-2 Stirling Single | |||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() GNR 1008 | |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
|
The Great Northern Railway (GNR) No. 1 class Stirling Single is a class of steam locomotive designed for express passenger work. Designed by Patrick Stirling, they are characterised by a single pair of large (8 ft 1 in) driving wheels which led to the nickname "eight-footer". Originally the locomotive was designed to haul up to 26 passenger carriages at an average speed of 47 miles per hour (76 km/h). [1] They could reach speeds of up to 85 mph (137 km/h). [2]
On his arrival at GNR, Stirling set out to standardise the railway's rolling stock. He also borrowed a 'single-wheeler' from the Great Eastern Railway and, in 1868, designed two versions of a 2-2-2 arrangement with 7 ft 1 in (2.159 m) driving wheels. [3]
The outcome in 1870 was a locomotive with 8 ft 1 in (2,460 mm) driving wheels, designed specifically for high-speed expresses between York and London. The British norm in those days was inside cylinders. However, not only were there frequent failures of the cranked axle shafts, with such large driving wheels they would have set the boiler too high. Stirling therefore used outside cylinders, with a four-wheeled bogie for lateral stability at the front end. According to Hamilton Ellis's description, entitled 'Pat Stirling's masterpiece,' the design was a version of a 2-2-2 designed by Stirling for the Glasgow and South Western Railway, "considerably enlarged, and provided with a leading bogie." [4]
A total of 53 were built at Doncaster Works between 1870 and 1895, in three series introduced in 1870, 1884, and 1894. [5] George Frederick Bird referred to the three series as "G, G2 and G3 classes" in 1910, [6] and this classification has been used in other sources [7] but it does not appear to have been used officially by the GNR.
The GNR did not number its locomotives sequentially, instead using numbers freed up by withdrawing older locomotives. Thus the 1870 series was numbered between GNR No. 1 and 671, the 1884 series 771-8 and 1001-2, and 1894 series 1003-8.
These locomotives were able to haul 275-long-ton (279 t; 308-short-ton) trains at an average of 50 miles per hour (80 km/h), with a top speed on lighter trains of 85 miles per hour (137 km/h). [8] When taking part in the 1895 Race to the North, GNR Stirling No. 775 made the 82 miles (132 km) from Grantham to York in 1 hour 16 minutes. This translates to an average speed of 64.7 mph (104.1 km/h).
Members of the 1894 series were originally built weighing 49.55 long tons (50.35 t) but following two high-speed derailments in 1895/6 the weight was reduced by 1% to 48.755 long tons (49.537 t; 54.606 short tons). [9]
With the arrival of the Ivatt Atlantics after 1898, the class began to be displaced from the most prestigious express services. Several examples were rebuilt by Henry Ivatt after 1898 with a domed boiler, but withdrawals of the 1870 series began in 1899. The last examples of the class were in use on secondary services until 1916.
The first of the class, No 1 is the only engine to be preserved. It is exhibited at the National Railway Museum, York. [12] It was restored to running order during the 1930s for the fiftieth anniversary of the Race to the North and steamed again during the 1980s.
The locomotive remains in good mechanical condition, though it has not steamed since 1985, and was used recently to act as a star player in York Theatre Royal's stage-performance of The Railway Children play, in which it was seen to move into a stage set of a period station, created initially at the National Railway Museum in 2008-9, and then in the redundant Waterloo International station in 2010-11. For the later Toronto and Kings Cross performances, LSWR T3 No. 563 was used instead.
The locomotive appeared to be in steam for its 'performances', however it was not, with fog machine generated smoke being used to portray escaping steam. In reality the locomotive was shunted into position during the performance using a Class 08 Diesel Shunter which remained out of sight of the main stage.
This section needs additional citations for verification .(March 2012) |
An 18-inch minimum gauge model of No. 1 was built in 1898, at the Regent Street Polytechnic, from a set of parts supplied by W. G. Bagnall. Amongst the students at Regent Street who worked on the model was Henry Greenly who later became a celebrated miniature locomotive builder and supplied locomotives for the Romney, Hythe and Dymchurch Railway. The locomotive was initially sold to Mr. E.F.S. Notter, the Great Northern Railway District Locomotive Superintendent at Kings Cross, who between 1910 and 1914 operated it at Alexander Park (London) and later kept it in King Cross 'Top Shed', the home of the full size Stirling Singles.[ citation needed ] In 1926 this locomotive was bought by the Fairbourne Miniature Railway [ citation needed ] and in 1936 it was sold to the Jaywick Miniature Railway, [13] which ran it until 1939. It then passed through the hands of a number of private owners until it was bought by the World of Country Life Museum at Sandy Bay, Exmouth, Devon, in 1986.[ citation needed ]
Bagnall had earlier in 1893 supplied a similar model (works number 1425) to Lord Downshire of Easthampstead Park, Crowthorne Berkshire. This engine was later preserved by Mr Hoare in the Boys Reading Room at the Training Ship Mercury at Hamble. It was subsequently sold to a private owner in Southampton in 1946. Its current whereabouts is unknown.[ citation needed ]
Nuremberg toymaker Georges Carette's range included a 2.5 inch-gauge model of Stirling Single 776, in around 1900. It was marketed in the UK by Bassett-Lowke, appearing in their 1904 catalogue.[ citation needed ]
An unpowered 5-inch gauge model of a Stirling Single locomotive, engineered by Dennis Hefford, is on display at the entrance to Arch Two of Brighton Toy and Model Museum.[ citation needed ]
A 1/12 scale model of No. 93, built by 'R Jackson' around 1888, is displayed at Worthing Museum and Art Gallery.
Kitmaster produced an injection moulded plastic kit of the Stirling Single in the 1950s. David Boyle, founder of Dapol Model Railways, recalls seeing the moulds being destroyed in the early 1980s, leading him to purchase the tooling for and reissue the remaining Kitmaster kits.[ citation needed ]
Aster Hobby introduced Gauge1 live steam model in 1996. [14] [15]
In April 2015, Rapido Trains announced that a forthcoming OO gauge model would be exclusively available from Locomotion Models.
A geared steam locomotive is a type of steam locomotive which uses gearing, usually reduction gearing, in the drivetrain, as opposed to the common directly driven design.
A Mallet locomotive is a type of compound articulated steam locomotive, invented by the Swiss engineer Anatole Mallet (1837–1919).
Under the Whyte notation for the classification of steam locomotives, 4-6-2 represents the wheel arrangement of four leading wheels on two axles, six powered and coupled driving wheels on three axles and two trailing wheels on one axle. The 4-6-2 locomotive became almost globally known as a Pacific type after a New Zealand locomotive that was shipped across the Pacific Ocean.
Under the Whyte notation for the classification of steam locomotives, a 2-10-4 locomotive has two leading wheels on one axle, usually in a Bissel truck, ten coupled driving wheels on five axles, and four trailing wheels on two axles, usually in a bogie. These were referred to as the Texas type in most of the United States, the Colorado type on the Burlington Route, and the Selkirk type in Canada.
Under the Whyte notation for the classification of locomotives, 4-6-4 represents the wheel arrangement of four leading wheels, six powered and coupled driving wheels and four trailing wheels. In France where the type was first used, it is known as the Baltic while it became known as the Hudson in most of North America.
Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.
The British Railways Standard Class 9F2-10-0 is a class of steam locomotive designed for British Railways by Robert Riddles. The Class 9F was the last in a series of standardised locomotive classes designed for British Railways during the 1950s, and was intended for use on fast, heavy freight trains over long distances. It was one of the most powerful steam locomotive types ever built for British Railways, and successfully performed its intended duties. The 9F class was given the nickname of 'Spaceship', due to its size and shape.
4-4-0 is a locomotive type with a classification that uses the Whyte notation for the classification of steam locomotives by wheel arrangement and represents the arrangement: four leading wheels on two axles, four powered and coupled driving wheels on two axles, and a lack of trailing wheels. Due to the large number of the type that were produced and used in the United States, the 4-4-0 is most commonly known as the "American" or "Eight-Wheeler" type, but the type subsequently also became popular in the United Kingdom, where large numbers were produced.
Under the Whyte notation for the classification of steam locomotives by wheel arrangement, 4-4-2 represents a configuration of a four-wheeled leading bogie, four powered and coupled driving wheels, and two trailing wheels supporting part of the weight of the boiler and firebox. This allows a larger firebox and boiler than the 4-4-0 configuration.
Under the Whyte notation for the classification of steam locomotives, 4-2-2 represents the wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle, and two trailing wheels on one axle.
Under the Whyte notation for the classification of steam locomotives, a 2-6-4 locomotive has two leading wheels, six coupled driving wheels and four trailing wheels.
GWR 3700 Class 3440 City of Truro is a 4-4-0 steam locomotive built in 1903 for the Great Western Railway (GWR) at Swindon Works to a design by George Jackson Churchward. It was partially rebuilt in 1911 and 1915, and renumbered 3717 in 1912. Although it is a point of contention, some believe the locomotive to be the first to attain a speed of 100 miles per hour (160.9 km/h) during a run from Plymouth to London Paddington in 1904.
The Great Western Railway Iron Duke Class 4-2-2 was a class of 7 ft 1⁄4 in broad gauge steam locomotives for express passenger train work.
Under the Whyte notation for the classification of steam locomotives, 0-4-2 represents the wheel arrangement with no leading wheels, four powered and coupled driving wheels on two axles and two trailing wheels on one axle. While the first locomotives of this wheel arrangement were tender engines, the configuration was later often used for tank engines, which is noted by adding letter suffixes to the configuration, such as 0-4-2T for a conventional side-tank locomotive, 0-4-2ST for a saddle-tank locomotive, 0-4-2WT for a well-tank locomotive and 0-4-2RT for a rack-equipped tank locomotive.
London and North Eastern Railway's (LNER) Peppercorn Class A1 is a class of 4-6-2 "Pacific" steam locomotives built between 1948 and 1949 at Doncaster and Darlington Works to a design of Arthur Peppercorn. Forty-nine were built for hauling express passenger services on the East Coast Main Line owned by LNER's successor, British Railways' North Eastern Region. None of the original Peppercorn A1s survived into preservation, with the last being scrapped in 1966. The 50th Peppercorn A1, 60163 Tornado, was completed in 2008 as an evolved member of its class.
The London and North Eastern Railway LNER Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services and later express passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt, most to A3 specifications, but no. 4470 was completely rebuilt as Class A1/1.
The GWR 6100 Class is a class of 2-6-2T side tank steam locomotives.
The Dean Single, 3031 Class, or Achilles Class was a type of steam locomotive built by the British Great Western Railway between 1891 and 1899. They were designed by William Dean for passenger work. The first 30 members of the class were built as 2-2-2s of the 3001 Class.
The Great Northern Railway (GNR) Class C1 is a type of 4-4-2 steam locomotive. One, ex GNR 251, later LNER 2800, survives in preservation. Much like their small boiler cousins, they were capable of reaching speeds of up to 90 mph (145 km/h). They were also known as Large Atlantics.
London and North Western Railway (LNWR) 2-2-2 No. 3020 Cornwall is a preserved steam locomotive. She was built as a 4-2-2 at Crewe Works in 1847, but was extensively rebuilt and converted into her current form in 1858.