Great Lakes Sport Trainer

Last updated
Sport Trainer
Great lakes.jpg
Great Lakes 2T-1A-1
RoleTrainer/Tourer
Manufacturer Great Lakes Aircraft Company,
WACO Classic Aircraft
First flight1929
Produced1929–1933, 1973–1982, 2011–

The Great Lakes Sport Trainer is an American biplane trainer and aerobatic aircraft. It was originally produced in large numbers before the company building it went bankrupt in the Great Depression in 1933. Owing to its continuing popularity, however, it was eventually placed back into production in the 1970s and again in 2011 by WACO Classic Aircraft.

Contents

Development and design

The Great Lakes Aircraft Corporation of Cleveland, Ohio produced a design for a small two-seat sports/trainer in early 1929, with the first prototype flying in March 1929. [1] The resulting aircraft, designated 2-T-1 was a single bay biplane of mixed, fabric-covered construction and with a tailskid undercarriage. Power was by a single 85 hp (63 kW) Cirrus III inline engine (as the Detroit Aircraft Corporation, the holding company for Great Lakes, also held the American rights to the Cirrus, so all Sports Trainers were originally sold with Cirrus engines). [2] Initial testing showed that the aircraft was tail heavy, so after the first four aircraft were built, the upper wing was swept back.

In January 2011, WACO Classic Aircraft announced that it will put the Great Lakes Model 2T-1A-1/2 model biplane back into production. The aircraft had not been available since 1980. The aircraft will incorporate several changes including metal wing spars. It will be offered in two models, a touring model, with a Lycoming IO-360-B1F6 engine and a higher-performance sport model, with a Lycoming AEIO-360-B1G6 engine. Work on the new production model was completed in June 2013 and the base price announced as US$245,000. [3] [4]

Operational history

The aircraft proved very successful, with about 250 built before construction ended. It was highly maneuverable even on the relatively modest power of a Cirrus engine. A 1929 Great Lakes Model 2T1a held for many years the world record for consecutive outside loops, a total of 131, set by Jim Moss flying the Hunt Special which by the early 1930s had been highly modified and re-powered with a Warner Scarab 165 7 cylinder radial engine. [5]

The Great Lakes continued to be popular well after production ended, and many aircraft adopted more powerful engines, particularly the Jacobs radial engines. [5] Eventually, in the 1960s, the rights for the Sport Trainer were acquired by Harvey Swack, who offered plans of the aircraft for sale to homebuilders. In 1972, Swack sold the rights on to Doug Champlin, who set up a reconstituted Great Lakes Aircraft Company to produce a revised version meeting the current airworthiness requirements, powered by modern Lycoming engines and revised materials of construction (including the use of Douglas fir instead of spruce). [2] The first of the new production aircraft, the Model 2T-1A-1, powered by a 140 hp engine was certified in May 1973, with production starting in October that year. A more powerful version, the 2T-1A-2 followed in July 1974. [6] In 1978, production was divided between Wichita, Kansas, and Enid, Oklahoma, with the intent on relocation to Florida. [7]

Rights to the Sport Trainer continued to switch hands, resulting in production moving several times. By 1980, 137 Sport Trainers had been built. [8] Production finally finished in 1985. [9]

Variants

Great Lakes 2T-1A Example. Melclose.jpg
Great Lakes 2T-1A
Model 2T-1
Original production. 85 hp (63 kW) American Cirrus III engine. Small tail. Approximately 40 built. [1]
Model 2T-1A
Revised version with enlarged tail surfaces and 90 hp (67 kW) American Cirrus Ace engine. About 200 built. [1]
Model 2T-1A-1
New production (1973 on) version. Powered by 140 hp (104 kW) Lycoming O-320 engine.
Model 2T-1A-2
More powerful version - powered by 180 hp (134 kW) Lycoming IO-360 engine.
Model 2T-1A-E
Homebuilt Experimental Plans-built [10]
Model 2T-1E
95 hp (71 kW) American Cirrus Ensign engine. About twelve built. [1]
X
A 2T-1E used for aero-engine testing.
Model 2T-1MS
Menasco Pirate powered two-seat version, one example (registration of NC 304Y) airworthy at Old Rhinebeck Aerodrome is fitted with Goodyear "airwheel" low-pressure main gear tires, and was a favorite aircraft of Cole Palen, the museum's founder. [11]
Model 2T-1R
Homebuilt variant with a 200 hp (150 kW) Ranger 6-440-5. [12]
Model 2T-2 Speedster
Racing version of 2T-1-A. Powered by 95 hp (71 kW) Cirrus Hi-Drive and straight top wing. Later rebuilt as Model 2T-1E. [13]
2013 Great Lakes 2T-1A-2 BabyGreatLakes-2T-1A-2.jpg
2013 Great Lakes 2T-1A-2
WACO Classic 2T-1A-1/2
New production model starting in 2011. There will be two models, a touring model, with a Lycoming IO-360-B1G6 engine and a higher-performance sport model, with a Lycoming AEIO-360-B1G6 engine [4]

Specifications (Model 2T-1A-2)

Data from Jane's All The World's Aircraft 1976-77 [6]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

Bücker Bü 131 Jungmann Military training aircraft by Bücker of Germany

The Bücker Bü 131 Jungmann was a German 1930s basic training aircraft which was used by the Luftwaffe during World War II.

Pitts Special Series of light aerobatic biplanes

The Pitts Special is a series of light aerobatic biplanes designed by Curtis Pitts. It has accumulated many competition wins since its first flight in 1944. The Pitts biplanes dominated world aerobatic competition in the 1960s and 1970s and, even today, remain potent competition aircraft in the lower categories.

Thorp T-18 homebuilt aircraft

The Thorp T-18 is a two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.

Beechcraft Musketeer

The Beechcraft Musketeer is a family of single-engined, low-wing, light aircraft that was produced by Beechcraft. The line includes the Model 19 Musketeer Sport, the Model 23 Musketeer, Custom and Sundowner, the Model 23-24 Musketeer Super III the retractable gear Model 24-R Sierra and the military CT-134 Musketeer.

Lycoming O-540 Family of flat-six piston aircraft engines

The Lycoming O-540 is a family of air-cooled six-cylinder, horizontally opposed fixed-wing aircraft and helicopter engines of 541.5 cubic inch displacement, manufactured by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming O-360.

Vans Aircraft RV-10

The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.

Diamond DA40 Diamond Star

The Diamond DA40 Diamond Star is an Austrian four-seat, single-engine, light aircraft constructed from composite materials. Built in both Austria and Canada, it was developed as a four-seat version of the earlier DA20 by Diamond Aircraft Industries.

WACO Classic Aircraft American aircraft manufacturer

The WACO Classic Aircraft Corporation is an American aircraft manufacturer, located in Battle Creek, Michigan. It was founded in 1983 as the Classic Aircraft Corporation and is now called the WACO Aircraft Corporation.

Great Lakes Aircraft Company

Great Lakes Aircraft Company is an aircraft manufacturer known for the 2T-1A Sport Trainer biplane. The company has a long history of building both private and military aircraft.

SOCATA Rallye family

The SOCATA Rallye is a light aircraft that was manufactured by French aviation company SOCATA. It was originally developed during the 1950s by French aircraft manufacturer Morane-Saulnier as the MS.880.

Waco Aircraft Company 1919-1947 American aircraft manufacturer

The Waco Aircraft Company (WACO) was an aircraft manufacturer located in Troy, Ohio, United States. Between 1920 and 1947, the company produced a wide range of civilian biplanes.

MBB 223 Flamingo Light single engine aircraft developed in West Germany in the 1960s

The MBB 223 Flamingo was a light aircraft developed in West Germany in the 1960s in response to a competition for a standard trainer for the country's aeroclubs. Designed by SIAT, it was a conventional low-wing monoplane with fixed tricycle undercarriage. The cockpit was enclosed by a large bubble canopy. SIAT had not undertaken much production of the type before the firm was acquired by MBB in 1970. Eventually, the new owners transferred production to CASA in Spain.

Piper Aerostar

The Piper Aerostar is an American twin-engined propeller-driven executive or light transport aircraft, designed by Ted R. Smith. It was originally built by Ted Smith Aircraft Company, which after 1978 became part of the Piper Aircraft Corporation.

Lycoming IO-390

The Lycoming IO-390 engine is a horizontally opposed, four-cylinder aircraft engine, manufactured by Lycoming Engines.

Steen Skybolt

The Steen Skybolt is an American homebuilt aerobatic biplane. Designed by teacher Lamar Steen as a high school engineering project, the prototype first flew in October 1970.

Stolp Starduster Too

The Stolp Starduster Too SA300 is a two-seat, conventional landing gear equipped homebuilt biplane. Aircraft Spruce & Specialty Co currently holds rights to sell plans for the aircraft.

The Aristocraft II was a six-place homebuilt aircraft designed by Terrence O'Neill.

Sport Copter 2

The Sport Copter 2 is an American two-seat autogyro designed and built by Sport Copter of Scappoose, Oregon. Made of bolted dural tubes and a carbon fiber shell, the Sport Copter 2 is a fully enclosed autogyro with removable doors and side-by-side seating for two. The prototype was powered by a 160 hp (119 kW) Subaru 2.2-litre 4-cylinder engine, but was subsequently upgraded to the Lycoming IO360. The Lycoming IO320 may also be fitted.

The Ultimate 10-200 is a Canadian homebuilt aerobatic biplane that was designed produced by Streamline Welding of Hamilton, Ontario, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

Brutsche Freedom 210 STOL

The Brutsche Freedom 210 STOL was a proposed American STOL homebuilt aircraft that was designed by Neal H. Brutsche and intended to be produced by Brutsche Aircraft Corporation of Salt Lake City, Utah, introduced in the mid-1990s. The aircraft was planned to be supplied as a kit for amateur construction.

References

Notes

  1. 1 2 3 4 Donald 1997, p.467.
  2. 1 2 History of the Great Lakes Sport Trainer [ dead link ] Retrieved 2 April 2008.
  3. ↑ Grady, Mary (11 June 2013). "Waco Great Lakes Production Underway". AvWeb. Archived from the original on 18 June 2013. Retrieved 13 June 2013.
  4. 1 2 Grady, Mary (January 2011). "Waco Revives Great Lakes Biplane". AvWeb. Archived from the original on 23 January 2011. Retrieved 20 January 2011.
  5. 1 2 Davisson, Budd. "The Great, Great Lakes". Air Progress, July 1975
  6. 1 2 Taylor 1976, p.290
  7. ↑ Air Progress: 14. November 1978.Missing or empty |title= (help)
  8. ↑ Taylor, J.W.R. 1980, p.347-348
  9. ↑ The Second Generation Great Lakes 1973 - 1984. Retrieved 2 April 2008
  10. ↑ Air Trails. Winter 1971.Missing or empty |title= (help)
  11. ↑ Old Rhinebeck Aerodrome NC304Y Archived 2014-03-21 at the Wayback Machine
  12. ↑ Air Trails: 9. Winter 1971.Missing or empty |title= (help)
  13. ↑ Great Lakes. Aerofiles. Retrieved 29 March 2008

Bibliography

  • Donald, David (editor). The Encyclopedia of World Aircraft. Aerospace Publishing. 1997. ISBN   1-85605-375-X.
  • Taylor, J.W.R. Jane's All The World's Aircraft 1976-77. London: Jane's, 1976. ISBN   0-354-00538-3.
  • Taylor, J.W.R. Jane's All The World's Aircraft 1980-81. London: Jane's, 1980. ISBN   0-531-03953-6.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.