Hantzsch pyridine synthesis | |
---|---|
Named after | Arthur Rudolf Hantzsch |
Reaction type | Ring forming reaction |
Identifiers | |
Organic Chemistry Portal | hantzsch-dihydropyridine-synthesis |
RSC ontology ID | RXNO:0000268 |
The Hantzsch pyridine synthesis or Hantzsch dihydropyridine synthesis is a multi-component organic reaction between an aldehyde such as formaldehyde, 2 equivalents of a β-keto ester such as ethyl acetoacetate and a nitrogen donor such as ammonium acetate or ammonia. [1] [2] The initial reaction product is a dihydropyridine which can be oxidized in a subsequent step to a pyridine. [3] The driving force for this second reaction step is aromatization. This reaction was reported in 1881 by Arthur Rudolf Hantzsch.
A 1,4-dihydropyridine dicarboxylate is also called a 1,4-DHP compound or a Hantzsch ester. These compounds are an important class of calcium channel blockers [2] and as such commercialized in for instance nifedipine, amlodipine or nimodipine.
The reaction has been demonstrated to proceed in water as reaction solvent and with direct aromatization by ferric chloride, manganese dioxide or potassium permanganate in a one-pot synthesis. [4]
The Hantzsch dihydropyridine synthesis has been effected by microwave chemistry. [5]
At least five significant pathways have been proposed for the Hantzch reaction synthesis of 1,4-dihydropyridine. Low yield and unexpected products may arise under varying reactants and reaction conditions. Previous studies have tested the reactions of preformed intermediates to determine the most likely mechanism and design successful syntheses. [6] An early study into the mechanism using 13C and 15N NMR indicated the intermediacy of the chalcone 6 and enamine 3. This data suggested the following route for the reaction. [7]
Later research using mass spectrometry monitoring with charge-tagged reactants supported intermediate pathway A as a likely route and showed evidence that the reaction followed two additional intermediate pathways which converge to precursor 7. [6] Reagents likely influence the route taken as when the methyl group of 1 is replaced by an electron-withdrawing group, the reaction instead proceeds through a diketone intermediate. [8]
The classical method for synthesis of Hantzsch 1,4-dihydropyridines, which involves a one-pot condensation of aldehydes with ethyl acetoacetate and ammonia, have several drawbacks such as harsh reaction conditions, long reaction times, and generally low yield of products. A synthesis of 1,4-dihydropyridines in aqueous micelles catalyzed by PTSA under ultrasonic irradiation. Using condensation of benzaldehyde, ethyl acetoacetate and ammonium acetate as a model, experiments have proven that when catalyzed by p-toluenesulfonic acid (PTSA) under ultrasonic irradiation, the reaction can have a product yield of 96% in aqueous (SDS, 0.1M). The reaction had also been carried out in various solvent system, and it was discovered that the ultrasonic irradiation in aqueous micelles gave better yields than in solvents such as methanol, ethanol, THF. Using the optimized reaction conditions, a series of 1,4-dihydropyridine were synthesized, and they all have a reaction yield above 90%. [9]
Oxidation of 1,4-DHPs accounts for one of the easiest ways of accessing pyridine derivatives. [10] Common oxidants used to promote aromatization of 1,4-DHPs are CrO3, KMnO4, and HNO3. [11] However, aromatization is often accompanied by: low chemical yields, strong oxidative conditions, burdensome workups, the formation of side products, or the need of excess oxidant. [11] [12] As such, particular attention has been paid to developing methods of aromatization to yield pyridine derivatives under milder and efficient conditions. Such conditions include, but are not limited to: iodine in refluxing methanol, [11] chromium dioxide(CrO2), [12] sodium chlorite, [13] and under metal-free, photochemical conditions using both UV-light and visible light. [14] Upon metabolism, 1,4-DHP based antihypertensive drugs undergo oxidation by way of cytochrome P-450 in the liver and are thus converted to their pyridine derivatives. [11] As a result, particular attention has been paid to the aromatization of 1,4-DHPs as a means to understand biological systems and so as to develop new methods of accessing pyridines. [13]
As a multi-component reaction, the Hantzsch pyridine synthesis is much more atom efficient with a simpler number of reaction steps than a linear-strategy synthesis.In recent years, research has looked to make this an even more environmentally friendly reaction by investigating "greener" solvents and reaction conditions. [15] One line of study has experimented with using ionic liquids as catalysts for room temperature reactions. Ionic liquids are an easy to handle and non-toxic option to replace traditional catalysts. Additionally, this catalyst lead to a high yield at room temperature, reducing the impact of heating the reaction for an extended time. A second study used ceric ammonium nitrate (CAN) as an alternate catalyst and achieved a solvent-free room temperature reaction. [16]
The Knoevenagel–Fries modification allows for the synthesis of unsymmetrical pyridine compounds. [17]
Pyridine is a basic heterocyclic organic compound with the chemical formula C5H5N. It is structurally related to benzene, with one methine group (=CH−) replaced by a nitrogen atom (=N−). It is a highly flammable, weakly alkaline, water-miscible liquid with a distinctive, unpleasant fish-like smell. Pyridine is colorless, but older or impure samples can appear yellow, due to the formation of extended, unsaturated polymeric chains, which show significant electrical conductivity. The pyridine ring occurs in many important compounds, including agrochemicals, pharmaceuticals, and vitamins. Historically, pyridine was produced from coal tar. As of 2016, it is synthesized on the scale of about 20,000 tons per year worldwide.
In organic chemistry, the Michael reaction or Michael 1,4 addition is a reaction between a Michael donor and a Michael acceptor to produce a Michael adduct by creating a carbon-carbon bond at the acceptor's β-carbon. It belongs to the larger class of conjugate additions and is widely used for the mild formation of carbon-carbon bonds.
In organic chemistry, the Knoevenagel condensation reaction is a type of chemical reaction named after German chemist Emil Knoevenagel. It is a modification of the aldol condensation.
The Wacker process or the Hoechst-Wacker process refers to the oxidation of ethylene to acetaldehyde in the presence of palladium(II) chloride and copper(II) chloride as the catalyst. This chemical reaction was one of the first homogeneous catalysis with organopalladium chemistry applied on an industrial scale.
Aromatization is a chemical reaction in which an aromatic system is formed from a single nonaromatic precursor. Typically aromatization is achieved by dehydrogenation of existing cyclic compounds, illustrated by the conversion of cyclohexane into benzene. Aromatization includes the formation of heterocyclic systems.
The Knorr pyrrole synthesis is a widely used chemical reaction that synthesizes substituted pyrroles (3). The method involves the reaction of an α-amino-ketone (1) and a compound containing an electron-withdrawing group α to a carbonyl group (2).
Hantzsch ester refers to an organic compound with the formula HN(MeC=C(CO2Et))2CH2 where Me = methyl (CH3) and Et = ethyl (C2H5). It is a light yellow solid. The compound is an example of a 1,4-dihydropyridine. It is named after Arthur Rudolf Hantzsch who described its synthesis in 1881. The compound is a hydride donor, e.g., for reduction of imines to amines. It is a synthetic analogue of NADH, a naturally occurring dihydropyridine.
The Stetter reaction is a reaction used in organic chemistry to form carbon-carbon bonds through a 1,4-addition reaction utilizing a nucleophilic catalyst. While the related 1,2-addition reaction, the benzoin condensation, was known since the 1830s, the Stetter reaction was not reported until 1973 by Dr. Hermann Stetter. The reaction provides synthetically useful 1,4-dicarbonyl compounds and related derivatives from aldehydes and Michael acceptors. Unlike 1,3-dicarbonyls, which are easily accessed through the Claisen condensation, or 1,5-dicarbonyls, which are commonly made using a Michael reaction, 1,4-dicarbonyls are challenging substrates to synthesize, yet are valuable starting materials for several organic transformations, including the Paal–Knorr synthesis of furans and pyrroles. Traditionally utilized catalysts for the Stetter reaction are thiazolium salts and cyanide anion, but more recent work toward the asymmetric Stetter reaction has found triazolium salts to be effective. The Stetter reaction is an example of umpolung chemistry, as the inherent polarity of the aldehyde is reversed by the addition of the catalyst to the aldehyde, rendering the carbon center nucleophilic rather than electrophilic.
1,4-Dihydropyridine (DHP) is an organic compound with the formula CH2(CH=CH)2NH. The parent compound is uncommon, but derivatives of 1,4-dihydropyridine are important commercially and biologically. The pervasive cofactors NADH and NADPH are derivatives of 1,4-dihydropyridine. 1,4-Dihydropyridine-based drugs are L-type calcium channel blockers, used in the treatment of hypertension. 1,2-Dihydropyridines are also known.
In organic chemistry, the Paal–Knorr synthesis is a reaction used to synthesize substituted furans, pyrroles, or thiophenes from 1,4-diketones. It is a synthetically valuable method for obtaining substituted furans and pyrroles, which are common structural components of many natural products. It was initially reported independently by German chemists Carl Paal and Ludwig Knorr in 1884 as a method for the preparation of furans, and has been adapted for pyrroles and thiophenes. Although the Paal–Knorr synthesis has seen widespread use, the mechanism wasn't fully understood until it was elucidated by V. Amarnath et al. in the 1990s.
Oseltamivir total synthesis concerns the total synthesis of the antiinfluenza drug oseltamivir marketed by Hoffmann-La Roche under the trade name Tamiflu. Its commercial production starts from the biomolecule shikimic acid harvested from Chinese star anise and from recombinant E. coli. Control of stereochemistry is important: the molecule has three stereocenters and the sought-after isomer is only 1 of 8 stereoisomers.
2,6-Lutidine is a natural heterocyclic aromatic organic compound with the formula (CH3)2C5H3N. It is one of several dimethyl-substituted derivative of pyridine, all of which are referred to as lutidines. It is a colorless liquid with mildly basic properties and a pungent, noxious odor.
The Chichibabin pyridine synthesis is a method for synthesizing pyridine rings. The reaction involves the condensation reaction of aldehydes, ketones, α,β-Unsaturated carbonyl compounds, or any combination of the above, with ammonia. It was reported by Aleksei Chichibabin in 1924. Methyl-substituted pyridines, which show widespread uses among multiple fields of applied chemistry, are prepared by this methodology.
Rosoxacin is a quinolone antibiotic indicated for the treatment of urinary tract infections and certain sexually transmitted diseases. Rosoxacin is not available in the United States.
Pyridine-N-oxide is the heterocyclic compound with the formula C5H5NO. This colourless, hygroscopic solid is the product of the oxidation of pyridine. It was originally prepared using peroxyacids as the oxidising agent. The compound is used infrequently as an oxidizing reagent in organic synthesis.
The Petrenko-Kritschenko reaction is a classic multicomponent-name reaction that is closely related to the Robinson–Schöpf tropinone synthesis, but was published 12 years earlier.
Phenol oxidation with hypervalent iodine reagents leads to the formation of quinone-type products or iodonium ylides, depending on the structure of the phenol. Trapping of either product is possible with a suitable reagent, and this method is often employed in tandem with a second process.
Reductions with hydrosilanes are methods used for hydrogenation and hydrogenolysis of organic compounds. The approach is a subset of ionic hydrogenation. In this particular method, the substrate is treated with a hydrosilane and auxiliary reagent, often a strong acid, resulting in formal transfer of hydride from silicon to carbon. This style of reduction with hydrosilanes enjoys diverse if specialized applications.
The Kröhnke pyridine synthesis is reaction in organic synthesis between α-pyridinium methyl ketone salts and α, β-unsaturated carbonyl compounds used to generate highly functionalized pyridines. Pyridines occur widely in natural and synthetic products, so there is wide interest in routes for their synthesis. The method is named after Fritz Kröhnke.
N-Hydroxyphthalimide is the organic compound with the formula C6H4(CO)2NOH. A white or yellow solid, it is a derivative of phthalimide. The compound is as a catalyst in the synthesis of other organic compounds. It is soluble in water and organic solvents such as acetic acid, ethyl acetate and acetonitrile.