The Mossberg 500 is a series of pump-action shotguns manufactured by O.F. Mossberg & Sons. The 500 series comprises widely varying models of hammerless repeaters, all of which share the same basic receiver and action, but differ in bore size, barrel length, choke options, magazine capacity, stock and forearm materials. Model numbers included in the 500 series are the 500, 505, 510, 535, and 590. The Revelation 310 and the New Haven 600 were also variations of the 500 series produced by Mossberg under different names. By 2021, about 11 million M500s had been produced, making it the most-produced shotgun of all time.
Pump action is a type of manual firearm action that is operated by moving a sliding handguard on the gun's forestock. When shooting, the sliding forend is pulled rearward to eject any expended cartridge and typically to cock the hammer or striker, and then pushed forward to load a new cartridge into the chamber. Most pump-action firearms use an integral tubular magazine, although some do use detachable box magazines. Pump-action firearms are typically associated with shotguns, although it has also been used in rifles, grenade launchers, and other types of firearms. A firearm using this operating mechanism is colloquially referred to as a pumpgun.
The RPK, sometimes inaccurately termed the RPK-47, is a Soviet 7.62×39mm light machine gun that was developed by Mikhail Kalashnikov in the early 1960s, in parallel with the AKM assault rifle. It was created to standardize the small arms inventory of the Soviet Army, where it replaced the 7.62×39mm RPD machine gun. The RPK continues to be used by the military of the post-Soviet states and certain African and Asian nations. The RPK is also manufactured in Bulgaria, Hungary, Romania, and Serbia.
The Saiga-12 is a shotgun available in a wide range of configurations, patterned after the Kalashnikov series of rifles and named after the Saiga antelope native to Russia. Like the Kalashnikov rifle variants, it is a rotating bolt, long-stroke gas piston operated firearm that feeds from a square magazine. All Saiga-12 configurations are recognizable as Kalashnikov-pattern guns by the large lever-safety on the right side of the receiver, the optic mounting rail on the left side of the receiver and the large top-mounted dust cover held in place by the rear of the recoil spring assembly. Saiga firearms are meant for civilian domestic sale in Russia, and export to international markets.
The Heckler & Koch MG4 is a belt-fed 5.56 mm light machine gun designed and developed by German firearm manufacturer Heckler & Koch. It was developed in the late 1990s and first seen publicly in September 2001. It has been selected to replace the 7.62 mm MG3 general-purpose machine gun in the Bundeswehr at the squad support level; it will complement the MG3 in other roles. It will also be the secondary armament of the new Puma infantry fighting vehicle. Overall, it is designed to be light, provide maximum safety to the user and function reliably under adverse conditions using a wide range of ammunition from different manufacturers, without the need to adjust the gas system. It was known as the MG43 prior to its adoption by the Bundeswehr.
A gunstock or often simply stock, the back portion of which is also known as a shoulder stock, a buttstock, or simply a butt, is a part of a long gun that provides structural support, to which the barrel, action, and firing mechanism are attached. The stock also provides a means for the shooter to firmly brace the gun and easily aim with stability by being held against the user's shoulder when shooting the gun, and helps to counter muzzle rise by transmitting recoil straight into the shooter's body.
The Mossberg Maverick 88 is a pump action shotgun manufactured for O.F. Mossberg & Sons. The Maverick 88 is virtually identical to the Mossberg 500. Factory Maverick 88s feature a black, synthetic only stock and forearm, cylinder bore, and cross-bolt safety. Most accessories not dealing with the trigger are interchangeable with a Mossberg 500.
SU-16 refers to a series of semi-automatic rifles and carbines manufactured by Kel-Tec CNC Industries, Inc. of Cocoa, Florida, referred to in Kel-Tec's marketing as "Sport Utility rifles". The SU-16 series is notable for its compact, lightweight and simple design; and for being able to be broken down and folded into a compact configuration for transportation and storage. While the barrel, bolt-carrier and mechanism are steel, the SU-16's stock, receiver, and forend are manufactured of high-strength polymer plastic.
The Sako TRG is a bolt-action sniper rifle line designed and manufactured by Finnish firearms manufacturer SAKO of Riihimäki. It is the successor to the SAKO TR-6 target rifle, and thus the letter G within the rifle's name is meant to represent number 7.
The Model 1200 is a pump-action shotgun that was manufactured by the Winchester-Western Division of Olin Corporation, starting 1964. It was redesignated the Model 1300 in 1978 with minimal changes. Production ceased in 2006 when the U.S. Repeating Arms Company, the subsequent manufacturer, went bankrupt. A militarized version of the Model 1200 was acquired by the U.S. Army for use during the Vietnam War. It is still in active service within various conflicts throughout the 21st century.
A barrel shroud is an external covering that envelops the barrel of a firearm to prevent unwanted direct contact with the barrel. Moving coverings such as pistol slides, fore-end extensions of the gunstock/chassis that do not fully encircle the barrel, and the receiver of a firearm itself are generally not described as barrel shrouds, though they can functionally act as such.
The Springfield Armory M6 Scout is a .22 Hornet over .410 bore combination gun that is virtually identical to the original M6 Aircrew Survival Weapon. It is also made in .22 Long Rifle over .410 bore and .22 Magnum over .410 bore. The Scouts are made with 18.25 inches (46.4 cm) barrels, as opposed to the original M6's 14 inches (36 cm) barrel length, to comply with National Firearms Act. The later models have large over-sized trigger guards and Picatinny rails for mounting a wide range of sights and scopes. They come in stainless steel or with a Parkerized finish.
The RMb-93 is a pump-action shotgun designed and manufactured by the KBP Instrument Design Bureau of Tula, Russia. It is the baseline model of the Rys ("Lynx") series of shotguns, taking the model name of Rys-K. The RMb-93 has been conceived as a combat weapon for Special Forces and Police units that might face Close Quarters Battle situations. The weapon was engineered to reduce the size as much as possible.
The Taurus Judge is a five-shot revolver designed and produced by Taurus International, chambered for .410 bore shot shells and the .45 Colt cartridge. Taurus promotes the Judge as a self-defense tool against carjacking and for home protection.
The Fabarm SDASS Tactical is a shotgun designed for police and/or security uses and has some special features such as folding front sight, built-in Picatinny rails on the top of the receiver, lengthened forearm to provide better control over the gun. SDASS shotguns are manufactured in a variety of differing styles.
The Akdal MKA 1919 is a gas operated, semi-automatic shotgun that resembles the M16 rifle and mimics the layout and placement of some of the controls. It was created by Turkish company Akdal Arms. The MKA 1919 uses a conventional gas-operated action which is located around the support tube that runs below the barrel. The return spring is also located around the same support tube which is concealed by an enlarged polymer handguard. The MKA 1919 barrel can be quickly removed from upper receiver. To charge the rifle, the charging handle on the receiver must be pulled. The upper receiver is manufactured from an aluminum alloy while the lower receiver, along with pistol grip and shoulder stock, is manufactured as one piece from impact-resistant polymer. Akdal MKA 1919 semi-automatic shotgun has a 5-round detachable box magazine. It has a bolt release identical in location and function to the one on the M16. Manual safety also duplicates M16-style being located on the left side of the receiver above the pistol grip. Standard sights include a front post installed on the M16-style removable base and a detachable M16A2-style carrying handle with built-in diopter sight. On the upper receiver, an integral Picatinny rail exists which will accept detachable carrying handle or optional red-dot or other optical sight attachments.
The Vepr-12 is a multipurpose semi-automatic detachable-magazine shotgun, produced by Molot-Oruzhie Ltd. It is patterned after the original Kalashnikov rifle and built on the heavier RPK light machine gun receiver.
The DP-12 is a bullpup 12-gauge pump action double-barreled shotgun designed by Standard Manufacturing. It has two tube magazines, each of which feeds its own barrel. Each magazine tube can hold up to seven 2.75-inch (70 mm) 12-gauge shotshells or six 3-inch (76 mm) shotgun shells; 16 or 14 (3") in total with indicator windows.
The Beretta 1301 is a gas-operated semi-automatic shotgun produced by Beretta, and imported by Beretta USA in the United States. The firearm has two distinct models: The 1301 Tactical is intended for tactical self-defense and law enforcement applications whereas the 1301 Competition is designed for practical shooting sports such as Multigun or IPSC Shotgun. Despite its intended applications, it is often used by a minority of hunters and clay pigeon shooters.
The Chiappa M6 Survival Gun is an over and under combination gun that comes in four versions; 12 gauge over .22 LR, 12 gauge over .22 WMR, 20 gauge over .22 LR, and 20 gauge over .22 WMR. It has a similar appearance to the original M6 Aircrew Survival Weapon, with a skeletonized metal buttstock surrounding a polypropylene foam insert. It uses double triggers and an enclosed firing mechanism.
