HomeSeer

Last updated
HomeSeer
HomeSeer Company Logo.png
Type of site
 Private
Available in English
Founded1999 (1999)
Headquarters Bedford, New Hampshire
Area servedWorldwide
Founder(s) Richard Helmke
Industry Home automation
Products Home automation software
Home automation controllers
Z-Wave controllers
Z-Wave light switches
Z-Wave water valves
Z-Wave sensors
URL homeseer.com

HomeSeer Technologies LLC is a technology company based in Bedford, New Hampshire, in the United States. HomeSeer makes home automation controllers and software, designed to integrate lighting, HVAC, security, AV and other subsystems in most homes. Additionally, the company maintains an online store of compatible home automation products and a free online community forum for users and dealers.

Contents

Software is at the core of HomeSeer's systems. The HS series (HS1-HS4) is licensed as a stand-alone product for users who wish to run it on their own personal computers. Its also pre-installed onto HomeTroller controllers, for users who prefer a more fully configured solution. HS series systems are connected to the users home network and may be programmed with any web browser in a typical installation. Once programming is complete, the HS3 system will carry out automation functions unattended. If desired, the HSTouch mobile app may be used to monitor and manually control the products in the home. HomeSeer's MyHS web service is designed to provide remote internet access only and is not required for processing of automation events in the home.

History

1999-2004

HS1 v1.7 distribution CD from 2004. HomeSeer HS1 CD Media.png
HS1 v1.7 distribution CD from 2004.

HomeSeer was founded in 1999 by company president Richard Helmke. At the time, Helmke was employed as Software Project Leader for Cabletron (later becoming Enterasys) in Rochester, New Hampshire. Helmke developed an interest in home automation and set about to find a software program that would fit his needs. After trying several programs, Helmke elected to create his own program (initially named AutoHome), and launched that effort, as a part-time pursuit, under the company name "Keware". Shortly after release, Keware was renamed HomeSeer and AutoHome was renamed HomeSeer v1 or HS1 for short. At first, the software was compatible with X10 light switches, plug-in modules and controllers. Over time, support was added for additional products such as the ADI Ocelot, JDS Stargate controller and WGL W800 wireless receivers. An open API coupled with a freely available SDK was added to encourage 3rd party development of plug-in (drivers) for support of additional technologies and products. HS1 included support for remote internet access and voice control using Microsoft speech technology (SAPI). [1] As sales of HS1 increased, a message board forum was implemented to provide community-based support for HS1 users.

In 2002, Helmke left his position at Enterasys to focus solely on HomeSeer.

In 2003, driver support was added to HS1 for Z-Wave, a wireless mesh network technology. At that time, the technology was in its infancy with only a handful of lighting products available from Advanced Control Technologies [2] and Sylvania. As of 2015, the Z-Wave Alliance reported there were more than 1,400 Z-Wave certified products [3] including light switches, thermostats, door locks, water valves, garage door controllers, sensors and other products.

In 2004, HomeSeer released its first hardware product, the ZU0100-001 Z-Wave USB interface. This product functioned as a Z-Wave transceiver to allow HS1 software to communicate with wireless Z-Wave devices.

2005-2010

August 2005 marked the release of HS2 software. The new version was designed as a web application to allow for remote set up and configuration, as well as remote control. A professional version (HSPRO) targeting custom installers and featuring advanced Z-Wave support with pre-licensed plug-ins, was also released. In December, the company's first hardware controller (PRO-100) was released. [4] The PRO-100 was a fan-less design with DOM storage that included an embedded installation of HSPRO software.

In 2006, HomeSeer released the Z-Troller, a handheld Z-Wave network controller that doubled as a Z-Wave interface. Since Z-Troller was both a network controller and interface, it supported advanced features such as network optimization and network backup and restore. In October, the PRO-100 was upgraded to a faster Series II model. [5]

In 2007, HomeSeer released the HSM100, a battery operated Z-Wave 'multi-sensor' with built-in sensors for motion, temperature and light level. The HSM100 was well suited for home automation events that relied on some combination of its sensor data. HomeSeer's HomeTroller was also released in 2007[ citation needed ] to provide functionality similar to the PRO-100 but at a lower price point. Unlike the PRO-100, the original HomeTroller was equipped with a conventional mechanical hard drive, active cooling (with fans) and embedded HS2 software. Subsequent versions were released with passive cooling (no fans) and with DOM, SD Card or SSD storage to improve reliability.[ citation needed ]

In 2009, HomeSeer released its first mobile app, a software program called HSTouch. Originally developed for Apple's iOS platform, HSTouch gave HomeSeer users the ability to monitor and control their homes with their iPhones and iPods. A companion program, HSTouch Designer, was also released for those who wished to customize the mobile app with their own screen designs and graphics.[ citation needed ]

In 2010, HomeSeer released its Android version of HSTouch mobile app. [6] In September, HomeTroller was upgraded to the S3 model.

2011-2013

HomeTroller-SE was in production from 2011-2014 HomeTroller-SE Home Controller.png
HomeTroller-SE was in production from 2011-2014

In 2011, HomeSeer released the HomeTroller-SE [7] as its new entry level controller. The -SE model featured a less powerful CPU and fewer features than the standard HomeTroller model but at approximately half the cost. An even lower cost HomeTroller-Mini was also in the works with a prototype unit debuting at CES 2011. [8] However, the HomeTroller-Mini design was later abandoned before release because of parts availability and cost issues.

In 2013, HomeSeer released HS3, a significant upgrade to the HS2 version. HS3 included an all-new JQuery web GUI, redesigned automation 'engine', multi-network Z-Wave support and new counter and timer features. A professional version, HS3PRO, was also released to service the dealer channel.

HomeSeer's HomeTroller Zee was also released in 2013. [9] The Zee was based on the Raspberry Pi1 model B computer, included HS3 software and was bundled with an Aeon Labs Z-Stick Z-Wave interface. HomeTroller Zee replaced the HomeTroller-SE as the company's entry level home controller.

2014

In January 2014, HomeSeer introduced voice programming and automatic camera support [10] [11] for their controllers. Voice programming allowed users to create automation events solely by voice using any Android mobile device. Automatic camera support was designed to automatically detect and configure settings for Foscam brand IP cameras. This allowed the cameras to be viewed with the HSTouch mobile app.

In March, HomeSeer released the model WFTT07 Control Pad free-standing 7" Android tabletop touchscreen embedded with their HSTouch mobile app. [12] The unit was designed to function as a WiFi connected control portal for HomeSeer controllers.

In April, HomeSeer launched MyHomeSeer-Remote (MyHS) remote access web service for HS3. [13] MyHS simplified the process of enabling remote access to HomeSeer systems by eliminating the need to adjust router settings or use DDNS technology. MyHS was also designed to optimize connection performance in the home by automatically providing a direct LAN connection for users attempting to access their systems on the local sub-net.

In September, HomeSeer released their HomeTroller-SEL to replace the HomeTroller-SE as the company's mid-level controller. [14] Compared to the WindowsXP-based SE, the new SEL model included a faster CPU, twice the RAM and SSD storage, all running on a Debian distribution of Linux.

Also in September, HomeSeer released their A2Z-Link Z-Wave bridge module and the HSM200 Z-Wave multi-sensor. [15]

In November, the HomeTroller S6 becomes HomeSeer's new flagship home controller, [16] replacing the PRO-100.

2015

In January 2015, HomeSeer released the Z-NET, [17] an IP-enabled remote Z-Wave interface for use with its HS3-based systems. Since Z-NET works over a network connection, it can be placed nearly anywhere in the home and may also be used in outbuildings, vacation homes or other secondary residences.

In April, HomeSeer launched its IFTTT channel. [18] IFTTT is a web service that allows users to create recipes that connect products, services and apps from more than 200 different companies around the world. The principal benefit of launching the channel is that it provides web-based integration for products, services and apps for which there are no native HomeSeer drivers (plug-ins). For example, a HomeSeer/IFTTT user could activate the ESPN sports network IFTTT channel and create a recipe to launch a HomeSeer event to turn on their TV and speak an alert when a sporting event begins.

In May, HomeSeer released its HomeTroller Zee S2 controller, based on the Raspberry Pi2 computer. Compared to the original Zee, the S2 model included a faster CPU, had twice the RAM and it included an internal Sigma 500 series Z-Wave module for native Z-Wave support. At the same time, several HomeSeer products underwent and achieved Z-Wave Plus certification Archived 2017-05-08 at the Wayback Machine . These products included HS3 software, HomeTroller Zee S2, HomeTroller-SEL, HomeTroller S6, Z-NET, SmartStick+ and A2Z-Link.

In December, HomeSeer released its Skill (app) for the Amazon Echo. The Skill allows HomeSeer users to control their systems by voice using the Amazon Echo.

2016

In March 2016, HomeSeer released a line of Z-Wave Plus lighting products. [19] The line included the HS-WS100+ wall switch, HS-WD100+ wall dimmer, HS-WA100+ wall accessory (for 3-way circuits), HS-PD100+ lamp module, HS-PA100+ appliance module and HS-DTA19+ smart light bulb. In September, a Z-Wave motorized water valve was released. Model HS-WV100+ was offered in 3 valve sizes; 3/4", 1" and 1.25". Support for Amazon's Alexa technology was also added to allow Alexa devices to control HomeSeer system devices and events.

2017

In 2017, HomeSeer released three battery operated Z-Wave sensors. HS-DS100+ (door/window sensor) was released in January and HS-MS100+ (PIR sensor) and HS-LS100+ (water sensor) were both released in December. Support for Google Home was also added to allow Google Home devices to control HomeSeer system devices and events. In May, Z-Flash was released as a commercial software tool, designed to update firmware in Z-Wave products.

2024

On February 26, 2024, HomeSeer announced via its blog that as of March 12, 2024, they would be making changes to their software which would alter the Voice Assistant functionality of their devices, requiring a subscription to continue using this functionality. [20]

Compatible technologies and products

HomeSeer systems are designed to integrate with the following technologies and products using a mixture of native and 3rd-party drivers (plug-ins):

Compatible technologies

A complete listing of compatible technologies may be found on HomeSeer's website. [21]

Compatible products

A complete listing of compatible products may be found on HomeSeer's website. [22]

Recognition, awards and reviews

Related Research Articles

<span class="mw-page-title-main">AMX LLC</span> American video equipment and control manufacturer

AMX is an American manufacturer of video switching and control devices. It is currently owned by Harman International Industries, a subsidiary of Samsung Electronics and is part of the Harman Professional Division.

Insteon is a proprietary home automation (domotics) system that enables light switches, lights, thermostats, leak sensors, remote controls, motion sensors, and other electrically powered devices to interoperate through power lines, radio frequency (RF) communications, or both. It employed a dual-mesh networking topology in which all devices are peers and each device independently transmits, receives, confirm and repeats messages. Like other home automation systems, it had been associated with the Internet of things.

<span class="mw-page-title-main">Z-Wave</span> Wireless standard for intelligent building networks

Z-Wave is a wireless communications protocol used primarily for residential and commercial building automation. It is a mesh network using low-energy radio waves to communicate from device to device, allowing for wireless control of smart home devices, such as smart lights, security systems, thermostats, sensors, smart door locks, and garage door openers. The Z-Wave brand and technology are owned by Silicon Labs. Over 300 companies involved in this technology are gathered within the Z-Wave Alliance.

Building automation (BAS), also known as building management system (BMS) or building energy management system (BEMS), is the automatic centralized control of a building's HVAC, electrical, lighting, shading, access control, security systems, and other interrelated systems. Some objectives of building automation are improved occupant comfort, efficient operation of building systems, reduction in energy consumption, reduced operating and maintaining costs and increased security.

Universal Powerline Bus (UPB) is a proprietary software protocol developed by Powerline Control Systems for power-line communication between devices used for home automation. Household electrical wiring is used to send digital data between UPB devices via pulse-position modulation.

Control4 is a brand of automation and networking systems for homes and businesses, offering a customizable and unified smart home system to automate and control connected devices including lighting, audio, video, climate control, intercom, and security. The Control4 platform interoperates with more than 13,000 third-party products and it is available in over 100 countries. After merging with SnapAV, by 2024 Control4 managed over half a million homes through a network of 12,000 authorized dealers. The company was based in Draper, Utah from 2003, until its relocation to Lehi, Utah in 2023. Control4 currently operates as a brand/division of ADI Global Distribution.

<span class="mw-page-title-main">WEMO</span>

WEMO, a subsidiary of Belkin, are a series of products from Belkin that enable users to control home electronics remotely. The product suite includes electrical plugs, motion sensors, light switches, cameras, light bulbs, and a mobile app.

ecobee Canadian home automation company

ecobee is a Canadian founded home automation company that makes smart thermostats, temperature, and occupancy sensors, smart light switches, smart cameras, and contact sensors. They were acquired by the American company Generac Holdings in 2021.

<span class="mw-page-title-main">LIFX</span>

LIFX is a line of energy-efficient, multi-color, Wi-Fi enabled, digital addressable LED light bulbs that can be controlled via a Wi-Fi equipped device such as a smartphone or smartwatch.

<span class="mw-page-title-main">HomeKit</span> Software framework by Apple for home automation

HomeKit, also known as Apple Home, is a software framework and communication protocol developed by Apple Inc. that lets users configure, communicate with and control smart-home appliances using Apple devices. It provides users with a way to automatically discover such devices and configure them. By designing rooms, items and actions in HomeKit, users can enable automations in the home through a voice command to Siri or through Apple's Home app or third party apps. With HomeKit, developers are able to create complex applications in order to manage accessories at a high level.

Garageio is a smart home garage door controller created by Alottazs Labs, LLC headquartered in Columbus, Ohio. Alottazs Labs, LLC is a privately held company founded in October 2012. Garageio is an Internet of Things product providing managed garage and gate access via a smartphone and other web-enabled devices.

Sensibo is a manufacturer of air conditioning controllers.

Myfox is a privately held French company that designs and produces connected, sensor-driven, and wireless home security equipment.

<span class="mw-page-title-main">Wink (platform)</span> Home automation platform

Wink is an American brand of software and hardware products that connects with and controls smart home devices from a consolidated user interface. Wink, Labs Inc., which develops and markets Wink, was founded in 2014 as a spin-off from invention incubator Quirky. After Quirky went through bankruptcy proceedings, it sold Wink to Flex in 2015. As of 2016, the Wink software is connected to 1.3 million devices. In July 2017, Flex sold Wink to i.am+ for $59 million.

Hive is a trademark owned by Centrica Hive Limited that produces smart home devices. It is one of the largest connected home providers in the UK and, as of May 2018, the company had more than 1,000,000 customers.

<span class="mw-page-title-main">Eve Systems</span> German home automation producer

Eve Systems GmbH is a German smart home and home automation producer founded on June 27, 2018.

Matter is a freely available connectivity standard for smart home and IoT devices. It aims to improve interoperability and compatibility between different manufacturers and security, and always allowing local control as an option.

<span class="mw-page-title-main">Home Assistant</span> Home automation software

Home Assistant is free and open-source software used for home automation. It serves as an integration platform and smart home hub, allowing users to control smart home devices. The software emphasizes local control and privacy and is designed to be independent of any specific Internet of Things (IoT) ecosystem. Its interface can be accessed through a web-based user interface, by using companion apps for Android and iOS, or by voice commands via a supported virtual assistant, such as Google Assistant, Amazon Alexa, Apple Siri, and Home Assistant's own "Assist" using natural language.

A smart home hub, sometimes also referred to as a "smart hub", "gateway'", "bridge", "controller" or "coordinator", is a control center/centre for a smart home, and enables the components of a smart home to communicate and respond to each other via communication through a central point. The smart home hub can consist of dedicated computer appliance, software appliance, or software running on computer hardware, and makes it possible to gather configuration, automation and monitoring of a smart house by communicating and controlling different smart devices that consist of for example home appliances, sensors and relays or robots, many of which are commonly categorized under Internet of things.

<span class="mw-page-title-main">Josh.ai</span>

Josh.ai is an American artificial intelligence company known for developing the voice-controlled home automation system known as Josh. The company was founded in 2015 by Tim Gill and Alex Capecelatro. It is headquartered in Denver, Colorado.

References

  1. ↑ Currid, Cheryl (16 August 2001). "Simple, low-cost automation kit turns lights on when nobody's home". Houston Chronicle. Retrieved 4 January 2016.
  2. ↑ "Z-Wave Product Catalog". Z-Wave Alliance. Retrieved 8 January 2016.
  3. ↑ "Z-Wave Pavilion Promotes Robust Smart Home Ecosystem to Installer Community at CEDIA EXPO". Z-Wave Alliance . Retrieved 24 November 2015.
  4. ↑ Morejon, Mario. "Review: HomeSeer's Home Controller Gets Smarter". CRN. Retrieved 25 November 2015.
  5. ↑ Murph, Darren (28 October 2006). "HomeSeer announces PRO-100 Series-II home automation controller". Engadget. Retrieved 26 November 2015.
  6. ↑ Cericola, Rachel. "HomeSeer is putting customized HSTouch control into the palm of Android users". CEPro. Archived from the original on 4 March 2016. Retrieved 26 November 2015.
  7. ↑ Watt, Ken (21 January 2013). "HomeSeer Hometroller SE-Pro Home Automation Controller Review". Automated Home. Retrieved 4 December 2015.
  8. ↑ Trout, Christopher (7 January 2011). "HomeSeer HomeTroller-Mini home automation controller gets you one step closer to the bachelor pad of the future". Engadget. Retrieved 26 November 2015.
  9. ↑ Jacobson, Julie. "HomeSeer Debuts its Smallest, Cheapest Home Automation Hub". CEPro. Archived from the original on 8 October 2015. Retrieved 26 November 2015.
  10. ↑ Lavelle, Morgan. "CES 2014: Exclusive Update - HomeSeer Technologies". Cocoontech. Archived from the original on 7 May 2015. Retrieved 15 December 2015.
  11. ↑ Cericola, Rachel. "HomeSeer Adds Camera, Voice Support to HomeTroller Zee". CEPro. Archived from the original on 4 March 2016. Retrieved 15 December 2015.
  12. ↑ Cericola, Rachel (7 March 2014). "HomeSeer Makes a Tabletop Smart Home Touchscreen for Android Users". Electronic House. Retrieved 25 November 2015.
  13. ↑ Jacobson, Julie. "HomeSeer Adds Cloud Service to Home Automation System". CEPro. Archived from the original on 20 November 2015. Retrieved 26 November 2015.
  14. ↑ Cericola, Rachel (30 September 2014). "HomeSeer Makes New HomeTroller-SEL Home Controller Faster and More Affordable". Electronic House. Retrieved 25 November 2015.
  15. ↑ Cericola, Rachel (8 September 2014). "HomeSeer Puts Z-Wave into 2 New Home Automation Products". Electronic House. Retrieved 25 November 2015.
  16. ↑ "HomeSeer Promises Efficient Home Automation with HomeTroller S6". Electronic House. 20 November 2014. Retrieved 26 November 2015.
  17. ↑ Rachel, Cericola (16 January 2015). "HomeSeer Z-NET Can Combine Up to 232 Z-Wave Home Automation Devices". Electronic House. Retrieved 15 December 2015.
  18. ↑ Jacobson, Julie. "Enabling Richer Home Automation Through IFTTT Smart-Home Engine". CEPro. Archived from the original on 31 December 2015. Retrieved 18 December 2015.
  19. ↑ Palenchar, Joseph (28 March 2016). "HomeSeer Adds Z-Wave Plus Products". Twice.com. Retrieved 1 May 2016.
  20. ↑ "Changes are coming to voice and app integration for MyHS". 26 February 2024. Retrieved 13 July 2024.
  21. ↑ "HomeSeer Plug-ins" . Retrieved 31 December 2015.
  22. ↑ "HomeSeer Compatible Products" . Retrieved 31 December 2015.
  23. ↑ Tech Live Staff (15 January 2004). "TechTVs Best of CES 2004". G4techTV. Archived from the original on 4 March 2016. Retrieved 24 November 2015.
  24. ↑ "TECHTV'S FOURTH ANNUAL 'BEST OF CES' HONORS HomeSeer Technologies". HomeToys. Archived from the original on 5 March 2016. Retrieved 24 November 2015.
  25. ↑ Alt, Kimberly (5 September 2014). "Don't Buy Into Smart Home Technology Until You Read This". SafeSmartLiving.com. Retrieved 1 March 2017.
  26. ↑ Sinclair, Patrick (10 September 2015). "The Best Z-Wave Controllers for Home Automation". AllHomeRobotics.com. Retrieved 24 November 2015.
  27. ↑ Rampton, John. "10 Amazing Home Automation Companies You Need to Know". Inc. Retrieved 24 November 2015.
  28. ↑ Newlands, Murray (September 2015). "Top 18 Home Automation Companies Who Will Run Your Home". The Huffington Post . Retrieved 24 November 2015.
  29. ↑ "Home Automation Market Segments, Opportunity, Growth and Forecast by End-Use Industry 2015-2025". University Chronicle. Retrieved 25 November 2015.[ permanent dead link ]
  30. ↑ Cericola, Rachel. "The Best Z-Wave In-Wall Dimmer". The Wire Cutter. Retrieved 11 October 2016.
  31. ↑ Butler, Jeff. "What is the Best Home Automation System?". ASecureLife.com. Retrieved 24 November 2015.
  32. ↑ Carlsen, John. "Home Automation Systems Review". TopTenReviews.com . Retrieved 24 November 2015.
  33. ↑ "What is the best Z-Wave Controller 2015?". BuildYourSmartHome.co. Retrieved 24 November 2015.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.