Hy-Bor

Last updated

Hy-Bor is a trademarked brand of hybrid composite materials that combines boron fiber and carbon fiber in a unidirectional prepreg. The portfolio was introduced to the commercial market in 1993 by Textron Specialty Materials [1] and currently marketed by Specialty Materials. The material's unique combination of constituent properties for fiber-reinforced composites has led to adoption in aerospace, sporting goods, and space applications.

Contents

History

In 1990, Tonen Chemical Corporation applied for and was awarded a patent which described a process for combining both boron fiber and carbon fiber into a unidirectional prepreg to enhance both strength and elastic modulus. [2] Textron Specialty Materials commercialized Hy-Bor in 1993, initially offering combinations of 3-mil (76 micron) or 4-mil (100 micron) boron fiber with various carbon fibers, including Toray T300, Hexcel IM7, and Syensqo T650 carbon fibers, using thermoset toughened epoxies and thermoplastic polyimides. [3]

Textron divested their composites division in 2001 to Specialty Materials, Inc., [4] the only commercial Hy-Bor offerings were a full-count 208-fiber per inch and low count 100-fiber per inch prepregs. Both laminates used 4-mil (100 micron) boron fiber with Mitsubishi MR40 and Newport 301 resin. [5] This portfolio was renamed Gen 1 Hy-Bor as a second-generation Hy-Bor development program began in 2019. [6]

Gen 2 Hy-Bor

In late 2019, shortly before Specialty Materials, Inc. was acquired [7] by Global Materials, Inc., the Gen 2 Hy-Bor development project started in partnership with Toray Advanced Composites. [8] This program focused on development of high-performance composites combining 4-mil boron fiber, Toray T1100G carbon fiber, and various Toray toughened epoxies, bismaleimides, cyanate esters, and polyimides. [9]

Applications

Aerospace

Hy-Bor has found significant utilization in multiple military unmanned aerial vehicles (UAV) programs.

In 1995, General Atomics introduced their RQ-1 Predator reconnaissance UAV program. By winter 2000, the Central Intelligence Agency sought to retrofit Predator airframes to carry and deploy AGM-114 Hellfire missiles and other ordnance with a MQ-1 program. [10] General Atomics utilized Hy-Bor to increase both stiffness and compression strength for the upper wing spar cap to enable the upgrade. [11] The MQ-1C Gray Eagle and MQ-9 Reaper also feature Hy-Bor for wing spar performance and light-weighting. [12]

Sporting Goods

In 1998, R.L. Winston Rod Co., a manufacturer of fly fishing rods in Twin Bridges, Montana, launched the BL5 rod with used "breakthrough" boron/graphite composite technology which utilized the higher modulus and compression properties in the butt section for improved high line speeds. [13]

Also in 1998, Team Rahal used Hy-Bor to increase downforce of their superspeedway wing by 4% while also making it "thinner, lighter, stronger, and stiffer" on their Reynard 98I. [14]

Calfee Design, a La Selva Beach, California manufacturer of carbon fiber bicycle products, launched their Dragonfly bike in late 2001 [15] featuring Hy-Bor tubing in key design locations to eliminate more than 10% of the total bike weight. [16]

For the 2022 holiday season, Bauer Hockey unveiled the AG5NT stick featuring the Specialty Materials' logo and describes boron fiber and carbon fiber technology enabling their lightest stick which "delivers the quickest Bauer release ever." Bauer holds exclusive rights for Hy-Bor and boron fiber in hockey. [17] For the 2023 holiday season, Bauer launched the PROTO-R powered by BORON enabling improved light-weighting and compression properties. [18]

Space

While not specifically marketed as Hy-Bor, hybrid boron/carbon fiber prepregs have been used as a structural composite in spaceborne applications. [19]

The James Webb Space Telescope's Integrated Science Instrument Module uses hybrid boron/high-modulus carbon fiber composites in its kinematic mounts to achieve zero coefficient of thermal expansion (CTE) in connection between the primary mirror backplane and the sensor packages. [20]

Technical Characteristics

Hy-Bor is created by adding boron fiber into carbon-fiber reinforced polymers, combining the high compressive strength of boron fiber [21] with the tensile properties of carbon fiber for use in composites to increase compression strength, [22] stiffness, decrease part weight and thickness, control coefficient of thermal expansion, and improve mechanical damping. Boron fiber volume is varied for selective reinforcement. [23]

Related Research Articles

<span class="mw-page-title-main">Boron nitride</span> Refractory compound of boron and nitrogen with formula BN

Boron nitride is a thermally and chemically resistant refractory compound of boron and nitrogen with the chemical formula BN. It exists in various crystalline forms that are isoelectronic to a similarly structured carbon lattice. The hexagonal form corresponding to graphite is the most stable and soft among BN polymorphs, and is therefore used as a lubricant and an additive to cosmetic products. The cubic variety analogous to diamond is called c-BN; it is softer than diamond, but its thermal and chemical stability is superior. The rare wurtzite BN modification is similar to lonsdaleite but slightly softer than the cubic form.

<span class="mw-page-title-main">Carbon fibers</span> Material fibers about 5–10 μm in diameter composed of carbon

Carbon fibers or carbon fibres are fibers about 5 to 10 micrometers (0.00020–0.00039 in) in diameter and composed mostly of carbon atoms. Carbon fibers have several advantages: high stiffness, high tensile strength, high strength to weight ratio, high chemical resistance, high-temperature tolerance, and low thermal expansion. These properties have made carbon fiber very popular in aerospace, civil engineering, military, motorsports, and other competition sports. However, they are relatively expensive compared to similar fibers, such as glass fiber, basalt fibers, or plastic fibers.

Fiberglass or fibreglass is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth. The plastic matrix may be a thermoset polymer matrix—most often based on thermosetting polymers such as epoxy, polyester resin, or vinyl ester resin—or a thermoplastic.

<span class="mw-page-title-main">Thermosetting polymer</span> Polymer obtained by irreversibly hardening (curing) a resin

In materials science, a thermosetting polymer, often called a thermoset, is a polymer that is obtained by irreversibly hardening ("curing") a soft solid or viscous liquid prepolymer (resin). Curing is induced by heat or suitable radiation and may be promoted by high pressure or mixing with a catalyst. Heat is not necessarily applied externally, and is often generated by the reaction of the resin with a curing agent. Curing results in chemical reactions that create extensive cross-linking between polymer chains to produce an infusible and insoluble polymer network.

Fibre-reinforced plastic is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper, wood, boron, or asbestos have been used. The polymer is usually an epoxy, vinyl ester, or polyester thermosetting plastic, though phenol formaldehyde resins are still in use.

Pre-preg is a composite material made from "pre-impregnated" fibers and a partially cured polymer matrix, such as epoxy or phenolic resin, or even thermoplastic mixed with liquid rubbers or resins. The fibers often take the form of a weave and the matrix is used to bond them together and to other components during manufacture. The thermoset matrix is only partially cured to allow easy handling; this B-Stage material requires cold storage to prevent complete curing. B-Stage pre-preg is always stored in cooled areas since heat accelerates complete polymerization. Hence, composite structures built of pre-pregs will mostly require an oven or autoclave to cure. The main idea behind a pre-preg material is the use of anisotropic mechanical properties along the fibers, while the polymer matrix provides filling properties, keeping the fibers in a single system.

Micarta is a brand name for composites of linen, canvas, paper, fiberglass, carbon fiber, or other fabric in a thermosetting plastic. It was originally used in electrical and decorative applications. Micarta was developed by George Westinghouse at least as early as 1910 using phenolic resins invented by Leo Baekeland. These resins were used to impregnate paper and cotton fabric which were cured under pressure and high temperature to produce laminates. In later years this manufacturing method included the use of fiberglass fabric, and other resin types were also used. Today Micarta high-pressure industrial laminates are produced with a wide variety of resins and fibers. The term has been used generically for most resin impregnated fiber compounds. Common uses of modern high-pressure laminates include electrical insulators, printed circuit board substrates, and knife handles.

The specific strength is a material's strength divided by its density. It is also known as the strength-to-weight ratio or strength/weight ratio or strength-to-mass ratio. In fiber or textile applications, tenacity is the usual measure of specific strength. The SI unit for specific strength is Pa⋅m3/kg, or N⋅m/kg, which is dimensionally equivalent to m2/s2, though the latter form is rarely used. Specific strength has the same units as specific energy, and is related to the maximum specific energy of rotation that an object can have without flying apart due to centrifugal force.

<span class="mw-page-title-main">RainSong</span>

RainSong is a musical instrument manufacturer company based in Woodinville, Washington. RainSong makes carbon fiber (graphite) bodied steel-string acoustic guitars.

A thermoset polymer matrix is a synthetic polymer reinforcement where polymers act as binder or matrix to secure in place incorporated particulates, fibres or other reinforcements. They were first developed for structural applications, such as glass-reinforced plastic radar domes on aircraft and graphite-epoxy payload bay doors on the Space Shuttle.

Carbon fiber-reinforced polymers, carbon-fibre-reinforced polymers, carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic, also known as carbon fiber, carbon composite, or just carbon, are extremely strong and light fiber-reinforced plastics that contain carbon fibers. CFRPs can be expensive to produce, but are commonly used wherever high strength-to-weight ratio and stiffness (rigidity) are required, such as aerospace, superstructures of ships, automotive, civil engineering, sports equipment, and an increasing number of consumer and technical applications.

Three-dimensional composites use fiber preforms constructed from yarns or tows arranged into complex three-dimensional structures. These can be created from a 3D weaving process, a 3D knitting process, a 3D braiding process, or a 3D lay of short fibers. A resin is applied to the 3D preform to create the composite material. Three-dimensional composites are used in highly engineered and highly technical applications in order to achieve complex mechanical properties. Three-dimensional composites are engineered to react to stresses and strains in ways that are not possible with traditional composite materials composed of single direction tows, or 2D woven composites, sandwich composites or stacked laminate materials.

Out of autoclave composite manufacturing is an alternative to the traditional high pressure autoclave (industrial) curing process commonly used by the aerospace manufacturers for manufacturing composite material. Out of autoclave (OOA) is a process that achieves the same quality as an autoclave but through a different process. OOA curing achieves the desired fiber content and elimination of voids by placing the layup within a closed mold and applying vacuum, pressure, and heat by means other than an autoclave. An RTM press is the typical method of applying heat and pressure to the closed mold. There are several out of autoclave technologies in current use including resin transfer molding (RTM), Same Qualified Resin Transfer Molding (SQRTM), vacuum-assisted resin transfer molding (VARTM), and balanced pressure fluid molding. The most advanced of these processes can produce high-tech net shape aircraft components.

<span class="mw-page-title-main">Automated fiber placement</span> Advanced method of manufacturing composite materials

Automated fiber placement (AFP), also known as advanced fiber placement, is an advanced method of manufacturing composite materials. These materials, which offer lighter weight with equivalent or greater strength than metals, are increasingly used in airframes and other industrial products.

Boron fiber or boron filament is an amorphous product which represents the major industrial use of elemental boron. Boron fiber manifests a combination of high strength and high elastic modulus.

Ekoa is a natural biocomposite of flax available in dry fabrics and pre-pregs, as well as cores and resins. Ekoa can be used for a variety of applications, including the production of musical instruments like the ukulele and guitar, and the manufacturing of sports equipment such as bicycle frames and lacrosse sticks.

<span class="mw-page-title-main">Paolo Feraboli</span> Italian inventor and businessman (born 1976)

Paolo Feraboli is a carbon fiber technology inventor and businessman. He is the founder and CTO of Gemini Composites, LLC, a wholly owned subsidiary of Mitsubishi Chemical Carbon Fiber and Composites, and founder and former Director of the Automobili Lamborghini Advanced Composite Structures Laboratory (ACSL). He is known for having invented the Forged Composite technology, and his contributions to the Lamborghini Sesto Elemento and Aventador programs.

CFSMC, or Carbon Fiber Sheet Molding Compound, is a ready to mold carbon fiber reinforced polymer composite material used in compression molding. While traditional SMC utilizes chopped glass fibers in a polymer resin, CFSMC utilizes chopped carbon fibers. The length and distribution of the carbon fibers is more regular, homogeneous, and constant than the standard glass SMC. CFSMC offers much higher stiffness and usually higher strength than standard SMC, but at a higher cost.

Toray Advanced Composites is a multi-national producer and supplier of advanced composite materials. In the twentieth century, it developed a range of high-performance thermoplastic composites and thermoset pre-preg resins that are used today in a broad spectrum of applications.

In materials science, a polymer matrix composite (PMC) is a composite material composed of a variety of short or continuous fibers bound together by a matrix of organic polymers. PMCs are designed to transfer loads between fibers of a matrix. Some of the advantages with PMCs include their light weight, high resistance to abrasion and corrosion, and high stiffness and strength along the direction of their reinforcements.

References

  1. ↑ Buck, Michael (1993). "New Hybrid Boron-Caron Prepreg Developed". Materials Technology. 8 (7–8): 138-139. Bibcode:1993MaTec...8..138.. doi:10.1080/10667857.1993.11784965.
  2. ↑ USExpired 5279879A,Makoto Takezawa, Makiji Miyao, Sadahisa Wada, Hiroshi Inoue,"Hybrid prepreg containing carbon fibers and at least one other reinforcing fiber in specific positions within the prepreg",published 1994-01-18,issued 1994-01-18
  3. ↑ "Hybrid prepreg offers unmatched strength and flexibility". Reinforced Plastics. 37 (9): 12. 1993. doi:10.1016/0034-3617(93)90393-5.
  4. ↑ Textron (2001-12-17). "Textron Sells Composite Material Products Business To Specialty Materials, Inc" . Retrieved 2024-10-28.
  5. ↑ "Specialty Materials Inc". Archived from the original on 2001-12-29. Retrieved 2024-10-28.
  6. ↑ "Gen 1 Hy-Bor Prepreg Tape". Archived from the original on 2021-12-02. Retrieved 2024-10-28.
  7. ↑ Mason, Hannah (2019-10-10). "Global Materials LLC to acquire Specialty Materials Inc". CompositesWorld. Retrieved 2024-10-28.
  8. ↑ Marzik, James; Foltz, Thomas; Camardese, Chantel (2019-04-10). "Recent Developments in Boron Fiber-Reinforced Composite Materials" (PDF). SAMPE 2019 - Charlotte, NC. SAMPE North America. doi:10.33599/nasampe/s.19.1438.
  9. ↑ "Toray and Specialty Materials Strengthens Partnership for Next Generation Aerospace Application at CAMX 2022". Toray Advanced Composites. 2022-10-18. Retrieved 2024-10-28.
  10. ↑ Bierbauer, Alec; Cooter, Mark (2021-01-26). Never Mind, We'll Do It Ourselves: The Inside Story of How a Team of Renegades Broke Rules, Shattered Barriers, and Launched a Drone Warfare Revolution. Skyhorse. ISBN   978-1510720916.
  11. ↑ Foltz, Tom (2020-06-24). "Boron Fiber: The Original High-Performance Fiber". CompositesWorld. Retrieved 2024-10-28. One of the first production applications for Hy-Bor was the spar caps below the wings of General Atomics' (San Diego, Calif., U.S.) Reaper unmanned aerial vehicle (UAV). The high compressive strength of boron fiber enabled a significantly increased payload to be carried on the Reaper.
  12. ↑ "Design, Optimization and Characterization of Hybrids of Boron Fiber and HM63 Carbon Fiber for Department of Defense Applications". 2023-07-03. The hybrids of boron and carbon fibers are commercially called Hy-Bor® which have been used on Department of Defense applications like General Atomics Gray Eagle and the Reaper variants of the Predator unmanned aerial vehicle. Hy-Bor® won its way into the Predator Platform because of the higher compression strengths of the Hy-Bor® which consists of Mitsubishi's MR40 fiber in NCT-301 Toughened Epoxy with Specialty Materials 0.004-inch diameter Boron fiber. This combination allowed General Atomics to stiffen and strengthen the spar caps of the Predator allowing them to carry AGM-114 Hellfire missiles with minimal change in the aerodynamic characteristic of the aircraft.
  13. ↑ "New Rods for 1998". Archived from the original on 1998-01-21. Retrieved 2024-10-28. New 5-piece Saltwater rods made with Boron/Graphite composite in butt sections to generate extremely high line speeds.
  14. ↑ "Software drives racing's leading edge Cover Story". 1998-05-04. Retrieved 2024-10-28. Engineers worked with sponsor Textron Specialty Materials (Lowell, MA) to make use of a graphite/boron composite skin, called Hy-Bor, which made the wing thinner, lighter, stronger, and stiffer than the stock item.
  15. ↑ "Dragonfly". Archived from the original on 2001-12-12. Retrieved 2024-10-28. High tech Boron/Carbon fiber Hybrid tubing.
  16. ↑ "Compression Behavior of High Performance Hy-Bor® and Graphite-Epoxy Bicycle Tubes" (PDF). 2004-12-31. Retrieved 2024-10-28. An all-graphite 54 cm frame such as the Calfee Tetra weighs 2.5 pounds while a similar sized Hy-Bor containing frame such as the Calfee Dragonfly weighs only 2 pounds. One-half or 0.25 pounds of this improvement occurs because of the strength and stiffening enhancement associated with the addition of boron.
  17. ↑ "New AG5NT Ultra-Lightweight Hockey Stick Senior". Archived from the original on 2023-01-30. Retrieved 2024-10-28. AG5NT is the only stick to utilize the unique properties of BORON – a revolutionary, ultra-lightweight fiber material with two key performance benefits: lightest Bauer stick ever and quickest release we've ever produced. [...] Outside of the aerospace and defensive aeronautics industries, Bauer is the only brand in hockey holding exclusive rights with Specialty Materials Inc.
  18. ↑ "BAUER PROTO-R GRIP STICK SENIOR". Archived from the original on 2023-11-01. Retrieved 2024-10-28. BORON's lightweight properties and one-of-a-kind compression, paired with a mid-kick construction to optimize shot power from anywhere on the ice, makes the PROTO-R BAUER's most deceptive stick in the game.
  19. ↑ USExpired 5593752A,David J. Pollatta, Thomas N. Quinzi,"Low CTE/CME boron/carbon fiber laminates and method of making them",published 1997-01-14,issued 1997-01-14
  20. ↑ "Case Studies and Composite Data" (PDF). 2023-10-18. p. 12. Retrieved 2024-10-28. The ISIM connects via kinematic mount to the Primary Mirror Backplane with extreme precision. Composites produced with boron fiber, M55J, and K13C2U are used for both structural performance and zero CTE tuning.
  21. ↑ Katafiasz, Tomas; Garulli, Torquato; Greenhalgh, Emile; Pinho, Silvertre (2023-08-04). "Compressive Failure of Boron-Carbon Fibre Hybrid Composites: A Detailed Experimental Study" (PDF). International Conferences on Composite Materials. The presence of boron fibres with CFRP composite plies loaded under compression were seen to arrest both in plane and out-of-plane kinking of the carbon fibre layers in the form of splitting at the boron/matrix interface.
  22. ↑ "Gen 2 Hy-Bor for Aerospace" (PDF). Specialty Materials. 2022-10-11.
  23. ↑ Garrett Bernard (2023-09-14). Unleashing Innovation: Boron Fiber for Multifunctional Composites (Video). CompositesWorld.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.