Although the Webb's mirror diameter is 2.7 times larger than that of the Hubble Space Telescope, it produces images of comparable sharpness because it observes in the longer-wavelength infrared spectrum. The longer the wavelength of the spectrum, the larger the information-gathering surface required (mirrors in the infrared spectrum or antenna area in the millimeter and radio ranges) for an image comparable in clarity to the visible spectrum of the Hubble Space Telescope.
The Webb was launched on 25 December 2021 on an Ariane 5 rocket from Kourou, French Guiana. In January 2022 it arrived at its destination, a solar orbit near the Sun–Earth L2Lagrange point, about 1.5million kilometers (930,000mi) from Earth. The telescope's first image was released to the public on 11 July 2022.[13]
Webb's primary mirror consists of 18 hexagonal mirror segments made of gold-plated beryllium, which together create a 6.5-meter-diameter (21ft) mirror, compared with Hubble's 2.4m (7ft 10in). This gives Webb a light-collecting area of about 25m2 (270sqft), about six times that of Hubble. Unlike Hubble, which observes in the near ultraviolet and visible (0.1 to 0.8μm), and near infrared (0.8–2.5μm)[14] spectra, Webb observes a lower frequency range, from long-wavelength visible light (red) through mid-infrared (0.6–28.5μm).[15] The telescope must be kept extremely cold, below 50K (−223°C; −370°F), so that the infrared light emitted by the telescope itself does not interfere with the collected light. Its five-layer sunshield protects it from warming by the Sun, Earth, and Moon.
Initial designs for the telescope, then named the Next Generation Space Telescope, began in 1996. Two concept studies were commissioned in 1999, for a potential launch in 2007 and a US$1 billion budget. The program was plagued with enormous cost overruns and delays. A major redesign was accomplished in 2005, with construction completed in 2016, followed by years of exhaustive testing, at a total cost of US$10 billion.
Features
The mass of the James Webb Space Telescope (JWST) is about half that of the Hubble Space Telescope. Webb has a 6.5m (21ft)-diameter gold-coated berylliumprimary mirror made up of 18 separate hexagonal mirrors. The mirror has a polished area of 26.3m2 (283sqft), of which 0.9m2 (9.7sqft) is obscured by the secondary support struts,[16] giving a total collecting area of 25.4m2 (273sqft). This is over six times larger than the collecting area of Hubble's 2.4m (7.9ft) diameter mirror, which has a collecting area of 4.0m2 (43sqft). The mirror has a gold coating to provide infrared reflectivity and this is covered by a thin layer of glass for durability.[17]
Webb is designed primarily for near-infrared astronomy, but can also see orange and red visible light, as well as the mid-infrared region, depending on the instrument being used.[10][11] It can detect objects up to 100 times fainter than Hubble can, and objects much earlier in the history of the universe, back to redshift z≈20 (about 180 million years cosmic time after the Big Bang).[18] For comparison, the earliest stars are thought to have formed between z≈30 and z≈20 (100–180 million years cosmic time),[19] and the first galaxies may have formed around redshift z≈15 (about 270 million years cosmic time). Hubble is unable to see further back than very early reionization[20][21] at about z≈11.1 (galaxy GN-z11, 400 million years cosmic time).[22][23][18]
The design emphasizes the near to mid-infrared for several reasons:
high-redshift (very early and distant) objects have their visible emissions shifted into the infrared, and therefore their light can be observed only via infrared astronomy;[14]
infrared light passes more easily through dust clouds than visible light;[14]
colder objects such as debris disks and planets emit most strongly in the infrared;
these infrared bands are difficult to study from the ground or by existing space telescopes such as Hubble.
Ground-based telescopes must look through Earth's atmosphere, which is opaque in many infrared bands (see figure at right). Even where the atmosphere is transparent, many of the target chemical compounds, such as water, carbon dioxide, and methane, also exist in the Earth's atmosphere, vastly complicating analysis. Existing space telescopes such as Hubble cannot study these bands since their mirrors are insufficiently cool (the Hubble mirror is maintained at about 15°C[288K; 59°F]) which means that the telescope itself radiates strongly in the relevant infrared bands.[24]
Webb can also observe objects in the Solar System at an angle of more than 85° from the Sun and having an apparent angular rate of motion less than 0.03 arc seconds per second.[a] This includes Mars, Jupiter, Saturn, Uranus, Neptune, Pluto, their satellites, and comets, asteroids and minor planets at or beyond the orbit of Mars. Webb has the near-IR and mid-IR sensitivity to be able to observe virtually all known Kuiper Belt Objects.[19][28] In addition, it can observe opportunistic and unplanned targets within 48 hours of a decision to do so, such as supernovae and gamma ray bursts.[19]
Three-quarter view of the top
Bottom (Sun-facing side)
Location and orbit
Webb operates in a halo orbit, circling around a point in space known as the Sun–Earth L2Lagrange point, approximately 1,500,000km (930,000mi) beyond Earth's orbit around the Sun. Its actual position varies between about 250,000 and 832,000km (155,000–517,000mi) from L2 as it orbits, keeping it out of both Earth and Moon's shadow. By way of comparison, Hubble orbits 550km (340mi) above Earth's surface, and the Moon is roughly 400,000km (250,000mi) from Earth. Objects near this Sun–Earth L2 point can orbit the Sun in synchrony with the Earth, allowing the telescope to remain at a roughly constant distance[29] with continuous orientation of its sunshield and equipment bus toward the Sun, Earth and Moon. Combined with its wide shadow-avoiding orbit, the telescope can simultaneously block incoming heat and light from all three of these bodies and avoid even the smallest changes of temperature from Earth and Moon shadows that would affect the structure, yet still maintain uninterrupted solar power and Earth communications on its sun-facing side. This arrangement keeps the temperature of the spacecraft constant and below the 50K (−223°C; −370°F) necessary for faint infrared observations.[30][31]
Test unit of the sunshield stacked and expanded at the Northrop Grumman facility in California, 2014
To make observations in the infrared spectrum, Webb must be kept under 50K (−223.2°C; −369.7°F); otherwise, infrared radiation from the telescope itself would overwhelm its instruments. Its large sunshield blocks light and heat from the Sun, Earth, and Moon, and its position near the Sun–Earth L2 keeps all three bodies on the same side of the spacecraft at all times.[32] Its halo orbit around the L2 point avoids the shadow of the Earth and Moon, maintaining a constant environment for the sunshield and solar arrays.[29] The resulting stable temperature for the structures on the dark side is critical to maintaining precise alignment of the primary mirror segments.[30]
The sunshield consists of five layers, each approximately as thin as a human hair.[33] Each layer is made of Kapton E film, coated with aluminum on both sides. The two outermost layers have an additional coating of doped silicon on the Sun-facing sides, to better reflect the Sun's heat back into space.[30] Accidental tears of the delicate film structure during deployment testing in 2018 led to further delays to the telescope deployment.[34]
The sunshield was designed to be folded twelve times so that it would fit within the Ariane5 rocket's payload fairing, which is 4.57m (15.0ft) in diameter, and 16.19m (53.1ft) long. The shield's fully deployed dimensions were planned as 14.162m ×21.197m (46.46ft ×69.54ft).[35]
Keeping within the shadow of the sunshield limits the field of regard of Webb at any given time. The telescope can see 40 percent of the sky from any one position, but can see all of the sky over a period of six months.[36]
Webb's primary mirror is a 6.5m (21ft)-diameter gold-coated beryllium reflector with a collecting area of 25.4m2 (273sqft). If it had been designed as a single, large mirror, it would have been too large for existing launch vehicles. The mirror is therefore composed of 18 hexagonal segments (a technique pioneered by Guido Horn d'Arturo), which unfolded after the telescope was launched. Image plane wavefront sensing through phase retrieval is used to position the mirror segments in the correct location using precise actuators. Subsequent to this initial configuration, they only need occasional updates every few days to retain optimal focus.[37] This is unlike terrestrial telescopes, for example the Keck telescopes, which continually adjust their mirror segments using active optics to overcome the effects of gravitational and wind loading.[38] The Webb telescope uses 132 small actuation motors to position and adjust the optics.[39] The actuators can position the mirror with 10nanometer accuracy.[40]
Webb's optical design is a three-mirror anastigmat,[41] which makes use of curved secondary and tertiary mirrors to deliver images that are free from optical aberrations over a wide field. The secondary mirror is 0.74m (2.4ft) in diameter. In addition, there is a fine steering mirror which can adjust its position many times per second to provide image stabilization. Point light sources in images taken by Webb have six diffraction spikes plus two fainter ones, due to the hexagonal shape of the primary mirror segments.[42]
Scientific instruments
NIRCam wrapped up in 2013The Calibration Assembly, one component of the NIRSpec instrumentMIRI
The Integrated Science Instrument Module (ISIM) is a framework that provides electrical power, computing resources, cooling capability as well as structural stability to the Webb telescope. It is made with bonded graphite-epoxy composite attached to the underside of Webb's telescope structure. The ISIM holds the four science instruments and a guide camera.[43]
NIRCam (Near Infrared Camera) is an infrared imager which has spectral coverage ranging from the edge of the visible (0.6μm) through to the near infrared (5μm).[44][45] There are 10 sensors each of 4 megapixels. NIRCam serves as the observatory's wavefront sensor, which is required for wavefront sensing and control activities, used to align and focus the main mirror segments. NIRCam was built by a team led by the University of Arizona, with principal investigator Marcia J. Rieke.[46]
NIRSpec (Near Infrared Spectrograph) performs spectroscopy over the same wavelength range. It was built by the European Space Agency (ESA) at ESTEC in Noordwijk, Netherlands. The leading development team includes members from Airbus Defence and Space, Ottobrunn and Friedrichshafen, Germany, and the Goddard Space Flight Center; with Pierre Ferruit (École normale supérieure de Lyon) as NIRSpec project scientist. The NIRSpec design provides three observing modes: a low-resolution mode using a prism, an R~1000 multi-object mode, and an R~2700 integral field unit or long-slit spectroscopy mode. Switching of the modes is done by operating a wavelength preselection mechanism called the Filter Wheel Assembly, and selecting a corresponding dispersive element (prism or grating) using the Grating Wheel Assembly mechanism. Both mechanisms are based on the successful ISOPHOT wheel mechanisms of the Infrared Space Observatory. The multi-object mode relies on a complex micro-shutter mechanism to allow for simultaneous observations of hundreds of individual objects anywhere in NIRSpec's field of view. There are two sensors, each of 4 megapixels.[47]
MIRI (Mid-Infrared Instrument) measures the mid-to-long-infrared wavelength range from 5 to 27μm.[48][49] It contains both a mid-infrared camera and an imaging spectrometer.[50] MIRI was developed as a collaboration between NASA and a consortium of European countries, and is led by George Rieke (University of Arizona) and Gillian Wright (UK Astronomy Technology Centre, Edinburgh, Scotland).[46] The temperature of the MIRI must not exceed 6K (−267°C; −449°F): a helium gas mechanical cooler sited on the warm side of the environmental shield provides this cooling.[51]
FGS/NIRISS (Fine Guidance Sensor and Near Infrared Imager and Slitless Spectrograph), led by the Canadian Space Agency (CSA) under project scientist John Hutchings (Herzberg Astronomy and Astrophysics Research Centre), is used to stabilize the line-of-sight of the observatory during science observations. Measurements by the FGS are used both to control the overall orientation of the spacecraft and to drive the fine steering mirror for image stabilization. The CSA also provided a Near Infrared Imager and Slitless Spectrograph (NIRISS) module for astronomical imaging and spectroscopy in the 0.8 to 5μm wavelength range, led by principal investigator René Doyon[52] at the Université de Montréal.[46] Although they are often referred together as a unit, the NIRISS and FGS serve entirely different purposes, with one being a scientific instrument and the other being a part of the observatory's support infrastructure.[53]
Diagram of the spacecraft bus. The solar panel is in green and the light purple panels are radiators.
The spacecraft bus is the primary support component of the JWST, hosting a multitude of computing, communication, electric power, propulsion, and structural parts.[54] Along with the sunshield, it forms the spacecraft element of the space telescope.[55][56] The spacecraft bus is on the Sun-facing "warm" side of the sunshield and operates at a temperature of about 300K (27°C; 80°F).[55]
The structure of the spacecraft bus has a mass of 350kg (770lb), and must support the 6,200kg (13,700lb) space telescope. It is made primarily of graphite composite material.[57] The assembly was completed in California in 2015. It was integrated with the rest of the space telescope leading to its 2021 launch. The spacecraft bus can rotate the telescope with a pointing precision of one arcsecond, and isolates vibration to two milliarcseconds.[58]
Webb has two pairs of rocket engines (one pair for redundancy) to make course corrections on the way to L2 and for station keeping–maintaining the correct position in the halo orbit. Eight smaller thrusters are used for attitude control–the correct pointing of the spacecraft.[59] The engines use hydrazine fuel (159 liters or 42 U.S. gallons at launch) and dinitrogen tetroxide as oxidizer (79.5 liters or 21.0 U.S. gallons at launch).[60]
Servicing
Webb is not intended to be serviced in space. A crewed mission to repair or upgrade the observatory, as was done for Hubble, would not be possible,[61] and according to NASA Associate Administrator Thomas Zurbuchen, despite best efforts, an uncrewed remote mission was found to be beyond available technology at the time Webb was designed.[62] During the long Webb testing period, NASA officials referred to the idea of a servicing mission, but no plans were announced.[63][64] Since the successful launch, NASA has stated that nevertheless limited accommodation was made to facilitate future servicing missions. These accommodations included precise guidance markers in the form of crosses on the surface of Webb, for use by remote servicing missions, as well as refillable fuel tanks, removable heat protectors, and accessible attachment points.[65][62]
Software
Ilana Dashevsky and Vicki Balzano write that Webb uses a modified version of JavaScript, called Nombas ScriptEase 5.00e, for its operations; it follows the ECMAScript standard and "allows for a modular design flow, where on-board scripts call lower-level scripts that are defined as functions". "The JWST science operations will be driven by ASCII (instead of binary command blocks) on-board scripts, written in a customized version of JavaScript. The script interpreter is run by the flight software, which is written in the programming language C++. The flight software operates the spacecraft and the science instruments."[66][67]
Comparison with other telescopes
Comparison with the Hubble Space Telescope primary mirrorPrimary mirror size comparison between Webb and Hubble
The desire for a large infrared space telescope traces back decades. In the United States, the Space Infrared Telescope Facility (later called the Spitzer Space Telescope) was planned while the Space Shuttle was in development, and the potential for infrared astronomy was acknowledged at that time.[68] Unlike ground telescopes, space observatories are free from atmospheric absorption of infrared light. Space observatories opened a "new sky" for astronomers.
However, there is a challenge involved in the design of infrared telescopes: they need to stay extremely cold, and the longer the wavelength of infrared, the colder they need to be. If not, the background heat of the device itself overwhelms the detectors, making it effectively blind. This can be overcome by careful design. One method is to put the key instruments in a dewar with an extremely cold substance, such as liquid helium. The coolant will slowly vaporize, limiting the lifetime of the instrument from as short as a few months to a few years at most.[24]
It is also possible to maintain a low temperature by designing the spacecraft to enable near-infrared observations without a supply of coolant, as with the extended missions of the Spitzer Space Telescope and the Wide-field Infrared Survey Explorer, which operated at reduced capacity after coolant depletion. Another example is Hubble's Near Infrared Camera and Multi-Object Spectrometer (NICMOS) instrument, which started out using a block of nitrogen ice that depleted after a couple of years, but was then replaced during the STS-109 servicing mission with a cryocooler that worked continuously. The Webb Space Telescope is designed to cool itself without a dewar, using a combination of sunshields and radiators, with the mid-infrared instrument using an additional cryocooler.[69]
Webb's delays and cost increases have been compared to those of its predecessor, the Hubble Space Telescope. When Hubble formally started in 1972, it had an estimated development cost of US$300 million (equivalent to $2,185,203,000in 2023), but by the time it was sent into orbit in 1990, the cost was about four times that. In addition, new instruments and servicing missions increased the cost to at least US$9 billion by 2006[73] (equivalent to $13,602,509,000in 2023).
Discussions of a Hubble follow-on started in the 1980s, but serious planning began in the early 1990s.[76] The Hi-Z telescope concept was developed between 1989 and 1994:[77] a fully baffled[b]4m (13ft) aperture infrared telescope that would recede to an orbit at 3 Astronomical unit (AU).[78] This distant orbit would have benefited from reduced light noise from zodiacal dust.[78] Other early plans called for a NEXUS precursor telescope mission.[79][80]
Correcting the flawed optics of the Hubble Space Telescope (HST) in its first years played a significant role in the birth of Webb.[81] In 1993, NASA conducted STS-61, the Space Shuttle mission that replaced HST's camera and installed a retrofit for its imaging spectrograph to compensate for the spherical aberration in its primary mirror.
The HST & Beyond Committee was formed in 1994 "to study possible missions and programs for optical-ultraviolet astronomy in space for the first decades of the 21st century."[82] Emboldened by HST's success, its 1996 report explored the concept of a larger and much colder, infrared-sensitive telescope that could reach back in cosmic time to the birth of the first galaxies. This high-priority science goal was beyond the HST's capability because, as a warm telescope, it is blinded by infrared emission from its own optical system. In addition to recommendations to extend the HST mission to 2005 and to develop technologies for finding planets around other stars, NASA embraced the chief recommendation of HST & Beyond[83] for a large, cold space telescope (radiatively cooled far below 0°C), and began the planning process for the future Webb telescope.
Preparation for the 2000 Astronomy and Astrophysics Decadal Survey (a literature review produced by the United States National Research Council that includes identifying research priorities and making recommendations for the upcoming decade) included further development of the scientific program for what became known as the Next Generation Space Telescope,[84] and advancements in relevant technologies by NASA. As it matured, studying the birth of galaxies in the young universe, and searching for planets around other stars–the prime goals coalesced as "Origins" by HST & Beyond became prominent.
As hoped, the NGST received the highest ranking in the 2000 Decadal Survey.[85]
An administrator of NASA, Dan Goldin, coined the phrase "faster, better, cheaper", and opted for the next big paradigm shift for astronomy, namely, breaking the barrier of a single mirror. That meant going from "eliminate moving parts" to "learn to live with moving parts" (i.e. segmented optics). With the goal to reduce mass density tenfold, silicon carbide with a very thin layer of glass on top was first looked at, but beryllium was selected at the end.[76]
The mid-1990s era of "faster, better, cheaper" produced the NGST concept, with an 8m (26ft) aperture to be flown to L2, roughly estimated to cost US$500 million.[86] In 1997, NASA worked with the Goddard Space Flight Center,[87]Ball Aerospace & Technologies,[88] and TRW[89] to conduct technical requirement and cost studies of the three different concepts, and in 1999 selected Lockheed Martin[90] and TRW for preliminary concept studies.[91] Launch was at that time planned for 2007, but the launch date was pushed back many times (see table further down).
In 2002, the project was renamed after NASA's second administrator (1961–1968), James E. Webb (1906–1992).[92] Webb led the agency during the Apollo program and established scientific research as a core NASA activity.[93]
In 2003, NASA awarded TRW the US$824.8 million prime contract for Webb. The design called for a de-scoped 6.1m (20ft) primary mirror and a launch date of 2010.[94] Later that year, TRW was acquired by Northrop Grumman in a hostile bid and became Northrop Grumman Space Technology.[91]
Development was managed by NASA's Goddard Space Flight Center in Greenbelt, Maryland, with John C. Mather as its project scientist. The primary contractor was Northrop Grumman Aerospace Systems, responsible for developing and building the spacecraft element, which included the satellite bus, sunshield, Deployable Tower Assembly (DTA) which connects the Optical Telescope Element to the spacecraft bus, and the Mid Boom Assembly (MBA) which helps to deploy the large sunshields on orbit,[95] while Ball Aerospace & Technologies was subcontracted to develop and build the OTE itself, and the Integrated Science Instrument Module (ISIM).[43]
Cost growth revealed in spring 2005 led to an August 2005 re-planning.[96] The primary technical outcomes of the re-planning were significant changes in the integration and test plans, a 22-month launch delay (from 2011 to 2013), and elimination of system-level testing for observatory modes at wavelengths shorter than 1.7μm. Other major features of the observatory were unchanged. Following the re-planning, the project was independently reviewed in April 2006.[citation needed]
In the 2005 re-plan, the life-cycle cost of the project was estimated at US$4.5 billion. This comprised approximately US$3.5 billion for design, development, launch and commissioning, and approximately US$1.0 billion for ten years of operations.[96] The ESA agreed in 2004 to contributing about €300 million, including the launch.[97] The CSA pledged CA$39 million in 2007[98] and in 2012 delivered its contributions in equipment to point the telescope and detect atmospheric conditions on distant planets.[99]
The assembled telescope following environmental testing
In January 2007, nine of the ten technology development items in the project successfully passed a Non-Advocate Review.[100] These technologies were deemed sufficiently mature to retire significant risks in the project. The remaining technology development item (the MIRI cryocooler) completed its technology maturation milestone in April 2007. This technology review represented the beginning step in the process that ultimately moved the project into its detailed design phase (Phase C). By May 2007, costs were still on target.[101] In March 2008, the project successfully completed its Preliminary Design Review (PDR). In April 2008, the project passed the Non-Advocate Review. Other passed reviews include the Integrated Science Instrument Module review in March 2009, the Optical Telescope Element review completed in October 2009, and the Sunshield review completed in January 2010.[102]
In April 2010, the telescope passed the technical portion of its Mission Critical Design Review (MCDR). Passing the MCDR signified the integrated observatory can meet all science and engineering requirements for its mission.[103] The MCDR encompassed all previous design reviews. The project schedule underwent review during the months following the MCDR, in a process called the Independent Comprehensive Review Panel, which led to a re-plan of the mission aiming for a 2015 launch, but as late as 2018. By 2010, cost over-runs were impacting other projects, though Webb itself remained on schedule.[104]
By 2011, the Webb project was in the final design and fabrication phase (Phase C).
Assembly of the hexagonal segments of the primary mirror, which was done via robotic arm, began in November 2015 and was completed on 3 February 2016. The secondary mirror was installed on 3 March 2016.[105][106] Final construction of the Webb telescope was completed in November 2016, after which extensive testing procedures began.[107]
In March 2018, NASA delayed Webb's launch an additional two years to May 2020 after the telescope's sunshield ripped during a practice deployment and the sunshield's cables did not sufficiently tighten. In June 2018, NASA delayed the launch by an additional 10 months to March 2021, based on the assessment of the independent review board convened after the failed March 2018 test deployment.[108] The review identified that Webb launch and deployment had 344 potential single-point failures – tasks that had no alternative or means of recovery if unsuccessful, and therefore had to succeed for the telescope to work.[109] In August 2019, the mechanical integration of the telescope was completed, something that was scheduled to be done 12 years before in 2007.[110]
After construction was completed, Webb underwent final tests at Northrop Grumman's historic Space Park in Redondo Beach, California.[111] A ship carrying the telescope left California on 26 September 2021, passed through the Panama Canal, and arrived in French Guiana on 12 October 2021.[112]
Cost and schedule issues
NASA's lifetime cost for the project is[when?] expected to be US$9.7 billion, of which US$8.8 billion was spent on spacecraft design and development and US$861 million is planned to support five years of mission operations.[113] Representatives from ESA and CSA stated their project contributions amount to approximately €700million and CA$200 million, respectively.[114]
A study in 1984 by the Space Science Board estimated that to build a next-generation infrared observatory in orbit would cost US$4 billion (US$7B in 2006 dollars, or $10B in 2020 dollars).[73] While this came close to the final cost of Webb, the first NASA design considered in the late 1990s was more modest, aiming for a $1billion price tag over 10 years of construction. Over time this design expanded, added funding for contingencies, and had scheduling delays.
Progression of estimates for schedule and cost, along with major milestones
By 2008, when the project entered preliminary design review and was formally confirmed for construction, over US$1 billion had already been spent on developing the telescope, and the total budget was estimated at US$5 billion (equivalent to $7.8billion in 2023).[127] In summer 2010, the mission passed its Critical Design Review (CDR) with excellent grades on all technical matters, but schedule and cost slips at that time prompted Maryland U.S. Senator Barbara Mikulski to call for external review of the project. The Independent Comprehensive Review Panel (ICRP) chaired by J. Casani (JPL) found that the earliest possible launch date was in late 2015 at an extra cost of US$1.5 billion (for a total of US$6.5 billion). They also pointed out that this would have required extra funding in FY2011 and FY2012 and that any later launch date would lead to a higher total cost.[121]
On 6 July 2011, the United States House of Representatives' appropriations committee on Commerce, Justice, and Science moved to cancel the James Webb project by proposing an FY2012 budget that removed US$1.9 billion from NASA's overall budget, of which roughly one quarter was for Webb.[128][129][130][131] US$3 billion had been spent and 75% of its hardware was in production.[132] This budget proposal was approved by subcommittee vote the following day. The committee charged that the project was "billions of dollars over budget and plagued by poor management".[128] In response, the American Astronomical Society issued a statement in support of Webb,[133] as did Senator Mikulski.[134] A number of editorials supporting Webb appeared in the international press during 2011 as well.[128][135][136] In November 2011, Congress reversed plans to cancel Webb and instead capped additional funding to complete the project at US$8 billion.[137]
While similar issues had affected other major NASA projects such as the Hubble telescope, some scientists expressed concerns about growing costs and schedule delays for the Webb telescope, worrying that its budget might be competing with those of other space science programs.[138][139] A 2010 Nature article described Webb as "the telescope that ate astronomy".[140] NASA continued to defend the budget and timeline of the program to Congress.[139][141]
In 2018, Gregory L. Robinson was appointed as the new director of the Webb program.[142] Robinson was credited with raising the program's schedule efficiency (how many measures were completed on time) from 50% to 95%.[142] For his role in improving the performance of the Webb program, Robinsons's supervisor, Thomas Zurbuchen, called him "the most effective leader of a mission I have ever seen in the history of NASA."[142] In July 2022, after Webb's commissioning process was complete and it began transmitting its first data, Robinson retired following a 33-year career at NASA.[143]
On 27 March 2018, NASA pushed back the launch to May 2020 or later,[124] with a final cost estimate to come after a new launch window was determined with the ESA.[144][145][146] In 2019, its mission cost cap was increased by US$800 million.[147] After launch windows were paused in 2020 due to the COVID-19 pandemic,[148] Webb was launched at the end of 2021, with a total cost of just under US$10 billion.
No single area drove the cost. For future large telescopes, there are five major areas critical to controlling overall cost:[149]
NASA, ESA and CSA have collaborated on the telescope since 1996. ESA's participation in construction and launch was approved by its members in 2003 and an agreement was signed between ESA and NASA in 2007. In exchange for full partnership, representation and access to the observatory for its astronomers, ESA is providing the NIRSpec instrument, the Optical Bench Assembly of the MIRI instrument, an Ariane 5 ECA launcher, and manpower to support operations.[97][150] The CSA provided the Fine Guidance Sensor and the Near-Infrared Imager Slitless Spectrograph and manpower to support operations.[151]
Several thousand scientists, engineers, and technicians spanning 15 countries have contributed to the build, test and integration of Webb.[152] A total of 258 companies, government agencies, and academic institutions participated in the pre-launch project; 142 from the United States, 104 from 12 European countries (including 21 from the U.K., 16 from France, 12 from Germany and 7 international),[153] and 12 from Canada.[152] Other countries as NASA partners, such as Australia, were involved in post-launch operation.[154]
In 2015, concerns were raised around Webb's possible role in the lavender scare, the mid-20th-century persecution by the U.S. government targeting homosexuals in federal employment.[155][156] In 2022, NASA released a report of an investigation,[157] based on an examination of more than 50,000 documents. The report found "no available evidence directly links Webb to any actions or follow-up related to the firing of individuals for their sexual orientation", either in his time in the State Department or at NASA.[158][159]
Mission goals
The James Webb Space Telescope has four key goals:
to search for light from the first stars and galaxies that formed in the universe after the Big Bang
These goals can be accomplished more effectively by observation in near-infrared light rather than light in the visible part of the spectrum. For this reason, Webb's instruments will not measure visible or ultraviolet light like the Hubble Telescope, but will have a much greater capacity to perform infrared astronomy. Webb will be sensitive to a range of wavelengths from 0.6 to 28μm (corresponding respectively to orange light and deep infrared radiation at about 100K or −173°C).
Webb may be used to gather information on the dimming light of star KIC 8462852, which was discovered in 2015, and has some abnormal light-curve properties.[161]
Additionally, it will be able to tell if an exoplanet has methane in its atmosphere, allowing astronomers to determine whether or not the methane is a biosignature.[162][163]
Orbit design
Webb is not exactly at the L2 point, but circles around it in a halo orbit.Alternative Hubble Space Telescope views of the Carina Nebula, comparing ultraviolet and visible (top) and infrared (bottom) astronomy. Far more stars are visible in the latter.
Webb orbits the Sun near the second Lagrange point (L2) of the Sun–Earth system, which is 1,500,000km (930,000mi) farther from the Sun than the Earth's orbit, and about four times farther than the Moon's orbit. Normally an object circling the Sun farther out than Earth would take longer than one year to complete its orbit. But near the L2 point, the combined gravitational pull of the Earth and the Sun allow a spacecraft to orbit the Sun in the same time that it takes the Earth. Staying close to Earth allows data rates to be much faster for a given size of antenna.
The telescope circles about the Sun–Earth L2 point in a halo orbit, which is inclined with respect to the ecliptic, has a radius varying between about 250,000km (160,000mi) and 832,000km (517,000mi), and takes about half a year to complete.[29] Since L2 is just an equilibrium point with no gravitational pull, a halo orbit is not an orbit in the usual sense: the spacecraft is actually in orbit around the Sun, and the halo orbit can be thought of as controlled drifting to remain in the vicinity of the L2 point.[164] This requires some station-keeping: around 2.5m/s per year[165] from the total ∆v budget of 93m/s.[166]:10 Two sets of thrusters constitute the observatory's propulsion system.[167] Because the thrusters are located solely on the Sun-facing side of the observatory, all station-keeping operations are designed to slightly undershoot the required amount of thrust in order to avoid pushing Webb beyond the semi-stable L2 point, a situation which would be unrecoverable. Randy Kimble, the Integration and Test Project Scientist for the JWST, compared the precise station-keeping of Webb to "Sisyphus [...] rolling this rock up the gentle slope near the top of the hill – we never want it to roll over the crest and get away from him".[168]
Animation of James Webb Space Telescope trajectory
Infrared observations can see objects hidden in visible light, such as the HUDF-JD2 shown here.Atmospheric windows in the infrared: Much of this type of light is blocked when viewed from the Earth's surface. It would be like looking at a rainbow but only seeing one color.
Webb is the formal successor to the Hubble Space Telescope (HST), and since its primary emphasis is on infrared astronomy, it is also a successor to the Spitzer Space Telescope. Webb will far surpass both those telescopes, being able to see many more and much older stars and galaxies.[169] Observing in the infrared spectrum is a key technique for achieving this, because of cosmological redshift, and because it better penetrates obscuring dust and gas. This allows observation of dimmer, cooler objects. Since water vapor and carbon dioxide in the Earth's atmosphere strongly absorbs most infrared, ground-based infrared astronomy is limited to narrow wavelength ranges where the atmosphere absorbs less strongly. Additionally, the atmosphere itself radiates in the infrared spectrum, often overwhelming light from the object being observed. This makes a space telescope preferable for infrared observation.[170]
The more distant an object is, the younger it appears; its light has taken longer to reach human observers. Because the universe is expanding, as the light travels it becomes red-shifted, and objects at extreme distances are therefore easier to see if viewed in the infrared.[171] Webb's infrared capabilities are expected to let it see back in time to the first galaxies forming just a few hundred million years after the Big Bang.[172]
Infrared radiation can pass more freely through regions of cosmic dust that scatter visible light. Observations in infrared allow the study of objects and regions of space which would be obscured by gas and dust in the visible spectrum,[171] such as the molecular clouds where stars are born, the circumstellar disks that give rise to planets, and the cores of active galaxies.[171]
Relatively cool objects (temperatures less than several thousand degrees) emit their radiation primarily in the infrared, as described by Planck's law. As a result, most objects that are cooler than stars are better studied in the infrared.[171] This includes the clouds of the interstellar medium, brown dwarfs, planets both in our own and other solar systems, comets, and Kuiper belt objects that will be observed with the Mid-Infrared Instrument (MIRI).[48][172]
Some of the missions in infrared astronomy that impacted Webb development were Spitzer and the Wilkinson Microwave Anisotropy Probe (WMAP).[173] Spitzer showed the importance of mid-infrared, which is helpful for tasks such as observing dust disks around stars.[173] Also, the WMAP probe showed the universe was "lit up" at redshift 17, further underscoring the importance of the mid-infrared.[173] Both these missions were launched in the early 2000s, in time to influence Webb development.[173]
Ground support and operations
The Space Telescope Science Institute (STScI), in Baltimore, Maryland, on the Homewood Campus of Johns Hopkins University, was selected in 2003 as the Science and Operations Center (S&OC) for Webb with an initial budget of US$162.2 million intended to support operations through the first year after launch.[174] In this capacity, STScI was to be responsible for the scientific operation of the telescope and delivery of data products to the astronomical community. Data was to be transmitted from Webb to the ground via the NASA Deep Space Network, processed and calibrated at STScI, and then distributed online to astronomers worldwide. Similar to how Hubble is operated, anyone, anywhere in the world, will be allowed to submit proposals for observations. Each year several committees of astronomers will peer review the submitted proposals to select the projects to observe in the coming year. The authors of the chosen proposals will typically have one year of private access to the new observations, after which the data will become publicly available for download by anyone from the online archive at STScI.[citation needed]
The bandwidth and digital throughput of the satellite is designed to operate at 458 gigabits of data per day for the length of the mission (equivalent to a sustained rate of 5.42 Mbps).[39] Most of the data processing on the telescope is done by conventional single-board computers.[175] The digitization of the analog data from the instruments is performed by the custom SIDECAR ASIC (System for Image Digitization, Enhancement, Control And Retrieval Application Specific Integrated Circuit). NASA stated that the SIDECAR ASIC will include all the functions of a 9.1kg (20lb) instrument box in a 3cm (1.2in) package and consume only 11milliwatts of power.[176] Since this conversion must be done close to the detectors, on the cold side of the telescope, the low power dissipation is crucial for maintaining the low temperature required for optimal operation of Webb.[176]
The telescope is equipped with a solid-state drive (SSD) with a capacity of 68GB, used as temporary storage for data collected from its scientific instruments. By the end of the 10-year mission, the usable capacity of the drive is expected to decrease to 60GB due to the effects of radiation and read/write operations.[177]
Micrometeoroid strike
The C3[c] mirror segment suffered a micrometeoroid strike from a large dust mote-sized particle between 23 and 25 May, the fifth and largest strike since launch, reported 8 June 2022, which required engineers to compensate for the strike using a mirror actuator.[179] Despite the strike, a NASA characterization report states "all JWST observing modes have been reviewed and confirmed to be ready for science use" as of July 10, 2022.[180]
The launch (designated Ariane flight VA256) took place as scheduled at 12:20 UTC on 25 December 2021 on an Ariane 5 rocket that lifted off from the Guiana Space Centre in French Guiana.[181][182] The telescope was confirmed to be receiving power, starting a two-week deployment phase of its parts[183] and traveling to its target destination.[184][185][186] The telescope was released from the upper stage 27 minutes 7 seconds after launch, beginning a 30-day adjustment to place the telescope in a Lissajous orbit[187] around the L2Lagrange point.
The telescope was launched with slightly less speed than needed to reach its final orbit, and slowed down as it travelled away from Earth, in order to reach L2 with only the velocity needed to enter its orbit there. The telescope reached L2 on 24 January 2022. The flight included three planned course corrections to adjust its speed and direction. This is because the observatory could recover from underthrust (going too slowly), but could not recover from overthrust (going too fast)– to protect highly temperature-sensitive instruments, the sunshield must remain between telescope and Sun, so the spacecraft could not turn around or use its thrusters to slow down.[188]
An L2 orbit is unstable, so JWST needs to use propellant to maintain its halo orbit around L2 (known as station-keeping) to prevent the telescope from drifting away from its orbital position.[189] It was designed to carry enough propellant for 10 years,[190] but the precision of the Ariane 5 launch and the first midcourse correction were credited with saving enough onboard fuel that JWST may be able to maintain its orbit for around 20 years instead.[191][192][193]Space.com called the launch "flawless".[194]
Ariane 5 containing the James Webb Space Telescope lifting-off from the launch pad
Ariane 5 containing Webb moments after lift-off
Webb as seen from the ESC-D Cryotechnic upper stage shortly after separation, approximately 29 minutes after launch. Part of the Earth with the Gulf of Aden is visible in the background of the image.[195]
Transit and structural deployment
Structural deployment timeline
Webb was released from the rocket upper stage 27 minutes after a flawless launch.[181][196] Starting 31 minutes after launch, and continuing for about 13 days, Webb began the process of deploying its solar array, antenna, sunshield, and mirrors.[197] Nearly all deployment actions are commanded by the Space Telescope Science Institute in Baltimore, Maryland, except for two early automatic steps, solar panel unfolding and communication antenna deployment.[198][199] The mission was designed to give ground controllers flexibility to change or modify the deployment sequence in case of problems.[200]
Structural deployment sequence
At 7:50p.m. EST on 25 December 2021, about 12 hours after launch, the telescope's pair of primary rockets began firing for 65 minutes to make the first of three planned mid-course corrections.[201] On day two, the high gain communication antenna deployed automatically.[200]
On 27 December 2021, at 60 hours after launch, Webb's rockets fired for nine minutes and 27 seconds to make the second of three mid-course corrections for the telescope to arrive at its L2 destination.[202] On 28 December 2021, three days after launch, mission controllers began the multi-day deployment of Webb's all-important sunshield. On 30 December 2021, controllers successfully completed two more steps in unpacking the observatory. First, commands deployed the aft "momentum flap", a device that provides balance against solar pressure on the sunshield, saving fuel by reducing the need for thruster firing to maintain Webb's orientation.[203]
On 31 December 2021, the ground team extended the two telescoping "mid booms" from the left and right sides of the observatory.[204] The left side deployed in 3 hours and 19 minutes; the right side took 3 hours and 42 minutes.[205][204] Commands to separate and tension the membranes followed between 3 and 4 January and were successful.[204] On 5 January 2022, mission control successfully deployed the telescope's secondary mirror, which locked itself into place to a tolerance of about one and a half millimeters.[206]
The last step of structural deployment was to unfold the wings of the primary mirror. Each panel consists of three primary mirror segments and had to be folded to allow the space telescope to be installed in the fairing of the Ariane rocket for the launch of the telescope. On 7 January 2022, NASA deployed and locked in place the port-side wing,[207] and on 8 January, the starboard-side mirror wing. This successfully completed the structural deployment of the observatory.[208][209][210]
On 24 January 2022, at 2:00p.m. Eastern Standard Time,[211] nearly a month after launch, a third and final course correction took place, inserting Webb into its planned halo orbit around the Sun–Earth L2 point.[212][213]
The MIRI instrument has four observing modes– imaging, low-resolution spectroscopy, medium-resolution spectroscopy and coronagraphic imaging. "On Aug. 24, a mechanism that supports medium-resolution spectroscopy (MRS), exhibited what appears to be increased friction during setup for a science observation. This mechanism is a grating wheel that allows scientists to select between short, medium, and longer wavelengths when making observations using the MRS mode," said NASA in a press statement.[214]
Animation of Webb's halo orbit
Commissioning and testing
On 12 January 2022, while still in transit, mirror alignment began. The primary mirror segments and secondary mirror were moved away from their protective launch positions. This took about 10 days, because the 132[215]actuator motors are designed to fine-tune the mirror positions at microscopic accuracy (10 nanometer increments) and must each move over 1.2 million increments (12.5mm) during initial alignment.[216][40]
Mirror alignment requires each of the 18 mirror segments, and the secondary mirror, to be positioned to within 50 nanometers. NASA compares the required accuracy by analogy: "If the Webb primary mirror were the size of the United States, each [mirror] segment would be the size of Texas, and the team would need to line the height of those Texas-sized segments up with each other to an accuracy of about 1.5 inches".[217]
James Webb Space Telescope Mirror alignment animations
Segment image identification. 18 mirror segments are moved to determine which segment creates which segment image. After matching the mirror segments to their respective images, the mirrors are tilted to bring all the images near a common point for further analysis.
Segment alignment begins by defocusing the segment images by moving the secondary mirror slightly. Mathematical analysis, called phase retrieval, is applied to the defocused images to determine the precise positioning errors of the segments. Adjustments of the segments then result in 18 well-corrected "telescopes". However, the segments still do not work together as a single mirror.
Image stacking. To put all of the light in a single place, each segment image must be stacked on top of one another. In the image stacking step, the individual segment images are moved so that they fall precisely at the center of the field to produce one unified image. This process prepares the telescope for coarse phasing.
Telescope alignment over instrument fields of view. After fine phasing, the telescope is well aligned at one place in the NIRCam field of view. Next the alignment must be extended to the rest of the instruments.
Mirror alignment was a complex operation split into seven phases, that had been repeatedly rehearsed using a 1:6 scale model of the telescope.[217] Once the mirrors reached 120K (−153°C; −244°F),[218]NIRCam targeted the 6th magnitude star HD 84406 in Ursa Major.[d][220][221] To do this, NIRCam took 1560 images of the sky and used these wide-ranging images to determine where in the sky each segment of the main mirror initially pointed.[222] At first, the individual primary mirror segments were greatly misaligned, so the image contained 18 separate, blurry, images of the star field, each containing an image of the target star. The 18 images of HD 84406 are matched to their respective mirror segments, and the 18 segments are brought into approximate alignment centered on the star ("Segment Image Identification"). Each segment was then individually corrected of its major focusing errors, using a technique called phase retrieval, resulting in 18 separate good quality images from the 18 mirror segments ("Segment Alignment"). The 18 images from each segment, were then moved so they precisely overlap to create a single image ("Image Stacking").[217]
With the mirrors positioned for almost correct images, they had to be fine tuned to their operational accuracy of 50 nanometers, less than one wavelength of the light that will be detected. A technique called dispersed fringe sensing was used to compare images from 20 pairings of mirrors, allowing most of the errors to be corrected ("Coarse Phasing"), and then introduced light defocus to each segment's image, allowing detection and correction of almost all remaining errors ("Fine Phasing"). These two processes were repeated three times, and Fine Phasing will be routinely checked throughout the telescope's operation. After three rounds of Coarse and Fine Phasing, the telescope was well aligned at one place in the NIRCam field of view. Measurements will be made at various points in the captured image, across all instruments, and corrections calculated from the detected variations in intensity, giving a well-aligned outcome across all instruments ("Telescope Alignment Over Instrument Fields of View"). Finally, a last round of Fine Phasing and checks of image quality on all instruments was performed, to ensure that any small residual errors remaining from the previous steps, were corrected ("Iterate Alignment for Final Correction"). The telescope's mirror segments were then aligned and able to capture precise focused images.[217]
In preparation for alignment, NASA announced at 19:28 UTC on 3 February 2022, that NIRCam had detected the telescope's first photons (although not yet complete images).[217][223] On 11 February 2022, NASA announced the telescope had almost completed phase 1 of alignment, with every segment of its primary mirror having located and imaged the target star HD 84406, and all segments brought into approximate alignment.[222] Phase 1 alignment was completed on 18 February 2022,[224] and a week later, phases 2 and 3 were also completed.[225] This meant the 18 segments were working in unison, however until all 7 phases are complete, the segments were still acting as 18 smaller telescopes rather than one larger one.[225] At the same time as the primary mirror was being commissioned, hundreds of other instrument commissioning and calibration tasks were also ongoing.[226]
Phase 1 interim image, annotated with the related mirror segments that took each image
Phase 1 annotated completion image of HD 84406
Phase 2 completion, showing "before and after" effects of segment alignment
Phase 3 completion, showing 18 segments "stacked" as a single image of HD 84406
Star 2MASS J17554042+6551277[e] captured by NIRCam instrument
A "selfie" taken by the NIRCam during the alignment process
Image comparison between "old" Spitzer and new Webb[228]
Alignment of the NASA/ESA/CSA James Webb Space Telescope's sensors[229]
Webb observing time is allocated through a General Observers (GO) program, a Guaranteed Time Observations (GTO) program, and a Director's Discretionary Early Release Science (DD-ERS) program.[231] The GTO program provides guaranteed observing time for scientists who developed hardware and software components for the observatory. The GO program provides all astronomers the opportunity to apply for observing time and will represent the bulk of the observing time. GO programs are selected through peer review by a Time Allocation Committee (TAC), similar to the proposal review process used for the Hubble Space Telescope.
Early Release Science program
In November 2017, the Space Telescope Science Institute announced the selection of 13 Director's Discretionary Early Release Science (DD-ERS) programs, chosen through a competitive proposal process.[232][233] The observations for these programs– Early Release Observations (ERO)[234][235] – were to be obtained during the first five months of Webb science operations after the end of the commissioning period. A total of 460 hours of observing time was awarded to these 13 programs, which span science topics including the Solar System, exoplanets, stars and star formation, nearby and distant galaxies, gravitational lenses, and quasars. These 13 ERS programs were to use a total of 242.8 hours of observing time on the telescope (not including Webb observing overheads and slew time).
For GO Cycle 1 there were 6,000 hours of observation time available to allocate, and 1,173 proposals were submitted requesting a total of 24,500 hours of observation time.[249] Selection of Cycle 1 GO programs was announced on 30 March 2021, with 266 programs approved. These included 13 large programs and treasury programs producing data for public access.[250] The Cycle 2 GO program was announced on May 10, 2023.[251] Webb science observations are nominally scheduled in weekly increments. The observation plan for every week is published on Mondays by the Space Telescope Science Institute.[252] In Cycle 4 the telescope showed its continued popularity in the astronomy community by garnering 2,377 proposals for 78,000 hours of observing time, nine times more than the available amount.[253]
Scientific results
The JWST completed its commissioning and was ready to begin full scientific operations on 11 July 2022.[254] With some exceptions, most experiment data is kept private for one year for the exclusive use of scientists running that particular experiment, and then the raw data will be released to the public.[255]
JWST observations substantially advanced understanding of exoplanets, the first billion years of the universe,[262] and many other astrophysical and cosmological phenomena.
First full-color images
The first full-color images and spectroscopic data were released on 12 July 2022, which also marked the official beginning of Webb's general science operations. U.S. President Joe Biden revealed the first image, Webb's First Deep Field, on 11 July 2022.[258][259] Additional releases around this time include:[263][264][265]
Carina Nebula– young, star-forming region called NGC 3324 about 8,500 light-years from Earth, described by NASA as "Cosmic Cliffs".
WASP-96b– including an analysis of atmosphere with evidence of water around a giant gas planet orbiting a distant star 1120 light-years from Earth.
Southern Ring Nebula– clouds of gas and dust expelled by a dying star 2,500 light-years from Earth.
Stephan's Quintet– a visual display of five galaxies with colliding gas and dust clouds creating new stars; four central galaxies are 290 million light-years from Earth.
SMACS J0723.3-7327– a galaxy cluster at redshift 0.39, with distant background galaxies whose images are distorted and magnified due to gravitational lensing by the cluster. This image has been called Webb's First Deep Field. It was later discovered that in this picture the JWST had also revealed three ancient galaxies that existed shortly after the Big Bang. Its images of these distant galaxies are views of the universe 13.1 billion years ago.[264][266][267]
On 14 July 2022, NASA presented images of Jupiter and related areas by the JWST, including infrared views.[268]
In a preprint released around the same time, NASA, ESA and CSA scientists stated that "almost across the board, the science performance of JWST is better than expected". The document described a series of observations during the commissioning, when the instruments captured spectra of transiting exoplanets with a precision better than 1000 ppm per data point, and tracked moving objects with speeds up to 67 milliarcseconds/second, more than twice as fast as the requirement.[a] It also obtained the spectra of hundreds of stars simultaneously in a dense field towards the Milky Way's Galactic Center. Other targets included:[26]
NIRISS aperture masking interferometry (AMI): A clear detection of the very low-mass companion star AB Doradus C, which had a separation of only 0.3 arcseconds to the primary. This observation was the first demonstration of AMI in space.
Within two weeks of the first Webb images, several preprint papers described a wide range of high redshift and very luminous (presumably large) galaxies believed to date from 235 million years (z=16.7) to 280 million years after the Big Bang, far earlier than previously known.[234][235] On 17 August 2022, NASA released a large mosaic image of 690 individual frames taken by the NIRCam on Webb of numerous very early galaxies.[270][271] Some early galaxies observed by Webb like CEERS-93316, which has an estimated redshift of approximately z=16.7 corresponding to 235.8 million years after the Big Bang, are high redshift galaxy candidates.[272][273] In September 2022, primordial black holes were proposed as explaining these unexpectedly large and early galaxies.[274][275][276] In May 2024, the JWST identified the most distant known galaxy, JADES-GS-z14-0,[277] seen just 290 million years after the Big Bang, corresponding to a redshift of 14.32. Part of the JWST Advanced Deep Extragalactic Survey (JADES), this discovery highlights a galaxy significantly more luminous and massive than expected for such an early period. Detailed analysis using JWST's NIRSpec and MIRI instruments revealed this galaxy's remarkable properties, including its significant size and dust content, challenging current models of early galaxy formation.[277]
Subsequent noteworthy observations and interpretations
In June 2023 detection of organic molecules 12 billion light-years away in a galaxy called SPT0418-47 using the Webb telescope was announced.[278]
On 12 July 2023, NASA celebrated the first year of operations with the release of Webb's image of a small star-forming region in the Rho Ophiuchi cloud complex, 390 light years away.[279]
In September 2023, two astrophysicists questioned the accepted Standard Model of Cosmology, based on the latest JWST studies.[280]
In May 2024, the JWST detected the farthest known black hole merger.[282] Occurring within the galaxy system ZS7, 740 million years after the Big Bang, this discovery suggests a fast growth rate for black holes through mergers, even in the young Universe.
Gallery
First images by the James Webb Space Telescope – released 12 July 2022
1 2 JWST was designed with the requirement to track objects that move as fast as Mars, which has a maximum apparent speed on the sky of 30 mas/s, which is the value given in the technical specification, i.e. the nominal value.[25] During commissioning, various asteroids were observed to determine the actual limitation for the speed of objects and it turned out to be 67 mas/s, which is more than twice the nominal value. Tracking at rates of 30–67 mas/s showed accuracies similar to tracking of slower targets. Thus, the telescope is able to observe also near-Earth asteroids (NEAs), comets closer to perihelion and interstellar objects.[26]:8 Later, after more experience with FGS had been gained, the tracking speed limit was finally set to 75 mas/s for routine observations. Higher rates up to 100 mas/s are also possible on special request, as FGS needs multiple guide stars to this end, which introduces complexity and inefficiency. The first observation with a super-fast rate was the DART impact experiment on 26 September 2022.[27]
↑ "Baffled", in this context, means enclosed in a tube in a similar manner to a conventional optical telescope, which helps to stop stray light entering the telescope from the side. For an actual example, see the following link: Freniere, E.R. (1981). "First-order design of optical baffles". Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, First-order design of optical baffles. Radiation Scattering in Optical Systems. Vol.257. pp.19–28. Bibcode:1981SPIE..257...19F. doi:10.1117/12.959598.
↑ The C3 mirror segment is positioned in the outer ring of segments, located at the '5 o'clock' number of a clock face, when viewing the primary mirror face-on.[178]
↑ 2MASS J17554042+6551277 is a star in the constellation Draco, in the Milky Way. It is located almost 2,000 light years away from Earth, within a degree of the north ecliptic pole. Its visual apparent magnitudemv is 10.95, which makes it much too faint to be observed with the naked eye. It is cooler than the Sun, but some 13 to 16 times brighter in visible light,[227] and is consequently not a sun-like star.
Related Research Articles
The Hubble Space Telescope is a space telescope that was launched into low Earth orbit in 1990 and remains in operation. It was not the first space telescope, but it is one of the largest and most versatile, renowned as a vital research tool and as a public relations boon for astronomy. The Hubble telescope is named after astronomer Edwin Hubble and is one of NASA's Great Observatories. The Space Telescope Science Institute (STScI) selects Hubble's targets and processes the resulting data, while the Goddard Space Flight Center (GSFC) controls the spacecraft.
The Space Telescope Science Institute (STScI) is the science operations center for the Hubble Space Telescope (HST), science operations and mission operations center for the James Webb Space Telescope (JWST), and science operations center for the Nancy Grace Roman Space Telescope. STScI was established in 1981 as a community-based science center that is operated for NASA by the Association of Universities for Research in Astronomy (AURA). STScI's offices are located on the Johns Hopkins University Homewood Campus and in the Rotunda building in Baltimore, Maryland.
In astronomy, first light is the first use of a telescope to take an astronomical image after it has been constructed. This is often not the first viewing using the telescope; optical tests will probably have been performed to adjust the components.
NASA's series of Great Observatories satellites are four large, powerful space-based astronomical telescopes launched between 1990 and 2003. They were built with different technology to examine specific wavelength/energy regions of the electromagnetic spectrum: gamma rays, X-rays, visible and ultraviolet light, and infrared light.
A fine guidance sensor (FGS) is an instrument on board a space telescope that provides high-precision pointing information as input to the telescope's attitude control systems. Interferometric FGSs have been deployed on the Hubble Space Telescope; a different technical approach is used for the James Webb Space Telescope's FGSs. In some specialized cases, such as astrometry, FGSs can also be used as scientific instruments.
The 2012 National Reconnaissance Office space telescope donation to NASA was the declassification and donation to NASA of two identical space telescopes by the United States National Reconnaissance Office. The donation has been described by scientists as a substantial improvement over NASA's current Hubble Space Telescope. Although the telescopes themselves were given to NASA at no cost, the space agency must still pay for the cost of instruments and electronics for the telescopes, as well as the satellites to house them and the launch of the telescopes. On February 17, 2016, the Nancy Grace Roman Space Telescope was formally designated as a mission by NASA, predicated on using one of the space telescopes.
The Large Ultraviolet Optical Infrared Surveyor, commonly known as LUVOIR, is a multi-wavelength space telescope concept being developed by NASA under the leadership of a Science and Technology Definition Team. It is one of four large astrophysics space mission concepts studied in preparation for the National Academy of Sciences 2020 Astronomy and Astrophysics Decadal Survey.
The James Webb Space Telescope (JWST) is an international 21st-century space observatory that was launched on 25 December 2021. It is intended to be the premier observatory of the 2020s, combining the largest mirror yet on a near-infrared space telescope with a suite of technologically advanced instruments from around the world.
Fine Guidance Sensor and Near Infrared Imager and Slitless Spectrograph (FGS-NIRISS) is an instrument on the James Webb Space Telescope (JWST) that combines a Fine Guidance Sensor and a science instrument, a near-infrared imager and a spectrograph. The FGS/NIRISS was designed by the Canadian Space Agency (CSA) and built by Honeywell as part of an international project to build a large infrared space telescope with the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA). FGS-NIRISS observes light from the wavelengths of 0.8 to 5.0 microns. The instrument has four different observing modes.
Integrated Science Instrument Module (ISIM) is a component of the James Webb Space Telescope, a large international infrared space telescope launched on 25 December 2021. ISIM is the heart of the JWST, and holds the main science payload which includes four science instruments and the fine guidance sensor.
Optical Telescope Element (OTE) is a sub-section of the James Webb Space Telescope, a large infrared space telescope launched on 25 December 2021, consisting of its main mirror, secondary mirrors, the framework and controls to support the mirrors, and various thermal and other systems.
NIRCam is an instrument aboard the James Webb Space Telescope. It has two major tasks, as an imager from 0.6 to 5 μm wavelength, and as a wavefront sensor to keep the 18-section mirrors functioning as one. In other words, it is a camera and is also used to provide information to align the 18 segments of the primary mirror. It is an infrared camera with ten mercury-cadmium-telluride (HgCdTe) detector arrays, and each array has an array of 2048×2048 pixels. The camera has a field of view of 2.2×2.2 arcminutes with an angular resolution of 0.07 arcseconds at 2 μm. NIRCam is also equipped with coronagraphs, which helps to collect data on exoplanets near stars. It helps with imaging anything next to a much brighter object, because the coronagraph blocks that light.
MIRI, or the Mid-Infrared Instrument, is an instrument on the James Webb Space Telescope. MIRI is a camera and a spectrograph that observes mid to long infrared radiation from 5 to 28 microns. It also has coronagraphs, especially for observing exoplanets. Whereas most of the other instruments on Webb can see from the start of near infrared, or even as short as orange visible light, MIRI can see longer wavelength light.
The James Webb Space Telescope (JWST) sunshield is a passive thermal control system deployed post-launch to shield the telescope and instrumentation from the light and heat of the Sun, Earth, and Moon. By keeping the telescope and instruments in permanent shadow, it allows them to cool to their design temperature of 40 kelvins. Its intricate deployment was successfully completed on January 4, 2022, ten days after launch, when it was more than 0.8 million kilometers (500,000 mi) away from Earth.
The spacecraft bus is a carbon fibre box that houses systems of the telescope and so is the primary support element of the James Webb Space Telescope, launched on 25 December 2021. It hosts a multitude of computing, communication, propulsion, and structural components. The other three elements of the JWST are the Optical Telescope Element (OTE), the Integrated Science Instrument Module (ISIM), and the sunshield. Region 3 of ISIM is also inside the spacecraft bus. Region 3 includes the ISIM Command and Data Handling subsystem and the Mid-Infrared Instrument (MIRI) cryocooler.
The OTE Pathfinder, or James Webb Space Telescope Pathfinder, is a technology demonstrator and test article for the James Webb Space Telescope. It is a non-flight replica of the actual backplane, but only includes the center section, not the two "wings" on the side that extend and have additional segments on the actual JWST. It has been used for various tests and has some different configurations, but some of the major tests have been practicing installing mirror segments with non-flight hardware as well as thermal tests. The Pathfinder has also been tested in conjunction with flight hardware including the Aft Optics System. One of the goals and uses of the pathfinder is risk reduction for JWST program. The pathfinder allows practicing integration and testing procedures, and for risk mitigation With the Pathfinder it was possible to test phasing two mirrors together and also to do tests with the Aft Optical System. The OTE Pathfinder was part of the plan for integration and testing of JWST, and in particular supported the Optical Telescope Element.
Webb's First Deep Field is the first operational image taken by the James Webb Space Telescope (JWST). The deep-field photograph, which covers a tiny area of sky visible from the Southern Hemisphere, is centered on SMACS 0723, a galaxy cluster in the constellation of Volans. Thousands of galaxies are visible in the image, some as old as 13 billion years. It is the highest-resolution image of the early universe ever taken. Captured by the telescope's Near-Infrared Camera (NIRCam), the image was revealed to the public by NASA on 11 July 2022.
SMACS J0723.3–7327, commonly referred to as SMACS 0723, is a galaxy cluster about 4 billion light years from Earth, within the southern constellation of Volans. It is a patch of sky visible from the Southern Hemisphere on Earth and often observed by the Hubble Space Telescope and other telescopes in search of the deep past. It was the target of the first full-color image to be unveiled by the James Webb Space Telescope (JWST), imaged using NIRCam, with spectra included, showing objects lensed by the cluster with redshifts implying they are 13.1 billion years old. The cluster has been previously observed by the Hubble Space Telescope (HST) as part of the Southern MAssive Cluster Survey (SMACS), as well as Planck and Chandra.
The James Webb Space Telescope (JWST) is a space telescope designed primarily to conduct infrared astronomy. Its complex launch and commissioning process lasted from late 2021 until mid-2022.
↑ "Webb Key Facts". Goddard Space Flight Center, NASA. Retrieved 7 April 2023.
1 2 "JWST Orbit". JWST User Documentation. Space Telescope Science Institute. Archived from the original on 11 July 2022. Retrieved 25 December 2021.
↑ "JWST Telescope". James Webb Space Telescope User Documentation. Space Telescope Science Institute. 23 December 2019. Archived from the original on 11 July 2022. Retrieved 11 June 2020. This article incorporates text from this source, which is in the public domain.
1 2 "Infrared astronomy from earth orbit". Infrared Processing and Analysis Center, NASA Spitzer Science Center, California Institute of Technology. 2017. Archived from the original on 21 December 2016. This article incorporates text from this source, which is in the public domain.
1 2 3 "L2 Orbit". Space Telescope Science Institute. Archived from the original on 14 June 2011. Retrieved 28 August 2016.
1 2 3 "The Sunshield". nasa.gov. NASA. Archived from the original on 10 August 2017. Retrieved 28 August 2016. This article incorporates text from this source, which is in the public domain.
1 2 "JWST". NASA. Archived from the original on 26 June 2015. Retrieved 29 June 2015. This article incorporates text from this source, which is in the public domain.
↑ Doyon, René; Hutchings, John B.; Beaulieu, Mathilde; Albert, Loic; Lafrenière, David; Willott, Chris; Touahri, Driss; Rowlands, Neil; Maszkiewicz, Micheal; Fullerton, Alex W.; Volk, Kevin; Martel, André R.; Chayer, Pierre; Sivaramakrishnan, Anand; Abraham, Roberto; Ferrarese, Laura; Jayawardhana, Ray; Johnstone, Doug; Meyer, Michael; Pipher, Judith L.; Sawicki, Marcin (22 August 2012). "The JWST Fine Guidance Sensor (FGS) and Near-Infrared Imager and Slitless Spectrograph (NIRISS)". In Clampin, Mark C; Fazio, Giovanni G; MacEwen, Howard A; Oschmann, Jacobus M (eds.). Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave. Vol.8442. pp.84422R. Bibcode:2012SPIE.8442E..2RD. doi:10.1117/12.926578. S2CID120702854.{{cite book}}: |journal= ignored (help) "FGS features two modules: an infrared camera dedicated to fine guiding of the observatory and a science camera module, the Near-Infrared Imager and Slitless Spectrograph (NIRISS)"
↑ "The Spacecraft Bus". NASA James Webb Space Telescope. 2017. Archived from the original on 6 July 2019. Retrieved 26 November 2016. This article incorporates text from this source, which is in the public domain.
1 2 "The JWST Observatory". NASA. 2017. Archived from the original on 20 May 2019. Retrieved 28 December 2016. The Observatory is the space-based portion of the James Webb Space Telescope system and is comprisedof three elements: the Integrated Science Instrument Module (ISIM), the Optical Telescope Element (OTE), which includes the mirrors and backplane, and the Spacecraft Element, which includes the spacecraft bus and the sunshield This article incorporates text from this source, which is in the public domain.
↑ "JWST Propulsion". JWST User Documentation. Space Telescope Science Institute. Archived from the original on 11 July 2022. Retrieved 29 December 2021.
↑ Dashevsky, Ilana; Balzano, Vicki (2007). "JWST: Maximizing. Efficiency and Minimizing Ground Systems"(PDF). International Symposium on Reducing the Costs of Spacecraft Ground Systems and Operations Proceedings. Archived(PDF) from the original on 4 December 2022. Retrieved 4 December 2022.
↑ McCarthy, S. G.; Autio, G. W. (1978). Infrared Detector Performance In The Shuttle Infrared Telescope Facility (SIRTF). 1978 Los Angeles Technical Symposium. Utilization of Infrared Detectors. Vol.81. Society of Photographic Instrumentation Engineers. pp.81–88. Bibcode:1978SPIE..132...81M. doi:10.1117/12.956060. Archived from the original on 5 March 2017. Retrieved 8 December 2016. The tenuous atmosphere above the 400 km nominal flight altitude has no measurable absorption so that detectors operating at all wavelengths from 5 μm to 1000 μm can achieve high radiometric sensitivity.
↑ "JPL: Herschel Space Observatory: Related Missions". NASA, Jet Propulsion Laboratory, Goddard Flight Center, California Institute of Technology. Archived from the original on 3 December 2016. Retrieved 4 June 2012. This article incorporates text from this source, which is in the public domain.
↑ Stockman, H. S. (June 1997). "The Next Generation Space Telescope. Visiting a time when galaxies were young". Space Telescope Science Institute, Baltimore, Maryland. The Association of Universities for Research in Astronomy, Washington, D.C.
↑ Astronomy and Astrophysics Survey Committee; Board on Physics and Astronomy; Space Studies Board; Commission on Physical Sciences, Mathematics, and Applications; National Research Council (16 January 2001). Astronomy and Astrophysics in the New Millennium. Washington, D.C.: National Academies Press. doi:10.17226/9839. ISBN978-0-309-07031-7. Archived from the original on 15 July 2022. Retrieved 15 December 2021.
1 2 "About James Webb". NASA. Archived from the original on 27 March 2018. Retrieved 15 March 2013. This article incorporates text from this source, which is in the public domain.
↑ Masetti, Maggie; Krishnamurthi, Anita (2009). "JWST Science". NASA. Archived from the original on 24 November 2017. Retrieved 14 April 2013. This article incorporates text from this source, which is in the public domain.
↑ "Basics of Space Flight". Jet Propulsion Laboratory. Archived from the original on 11 June 2012. Retrieved 28 August 2016. This article incorporates text from this source, which is in the public domain.
↑ Fisher, Alise (30 December 2021). "Webb's Aft Momentum Flap Deployed". James Webb Space Telescope (NASA Blogs). Archived from the original on 30 December 2021. Retrieved 31 December 2021.
↑ "Calls for Proposals & Policy". Space Telescope Science Institute. Archived from the original on 15 July 2022. Retrieved 13 November 2017. This article incorporates text from this source, which is in the public domain.
↑ Yuan, Guan-Wen; Lei, Lei; Wang, Yuan-Zhu; Wang, Bo; Wang, Yi-Ying; Chen, Chao; Shen, Zhao-Qiang; Cai, Yi-Fu; Fan, Yi-Zhong (2024). "Rapidly growing primordial black holes as seeds of the massive high-redshift JWST Galaxies". Science China Physics, Mechanics & Astronomy. 67 (10). arXiv:2303.09391. Bibcode:2024SCPMA..6709512Y. doi:10.1007/s11433-024-2433-3.
↑ Su, Bing-Yu; Li, Nan; Feng, Lei (2023). "An inflation model for massive primordial black holes to interpret the JWST observations". arXiv:2306.05364 [astro-ph.CO].
Rigby, Jane; Perrin, Marshall; McElwain, Michael; Kimble, Randy; Friedman, Scott; etal. (2023). "The Science Performance of JWST as Characterized in Commissioning". Publications of the Astronomical Society of the Pacific. 135 (1046): 048001. arXiv:2207.05632. Bibcode:2023PASP..135d8001R. doi:10.1088/1538-3873/acb293. S2CID253735464.
Launches are separated by dots ( • ), payloads by commas ( , ), multiple names for the same satellite by slashes ( / ). Crewed flights are underlined. Launch failures are marked with the † sign. Payloads deployed from other spacecraft are (enclosed in parentheses).
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
