European Retrievable Carrier

Last updated
European Retrievable Carrier
Eureca ESA382424.jpg
EURECA deployment in 1992
Mission typeMaterials science
Astronomy
Operator ESA
COSPAR ID 1992-049B OOjs UI icon edit-ltr-progressive.svg
SATCAT no. 22065
Mission durationPlanned: 1 year
Elapsed: 334 days
Spacecraft properties
Manufacturer MBB-ERNO
Launch mass4,491 kilograms (9,901 lb)
Power1,000 watts
Start of mission
Launch date31 July 1992, 11:56:48 UTC
Rocket Space Shuttle Atlantis
STS-46
Launch site Kennedy LC-39B
Deployment date2 August 1992 (1992-08-02)
End of mission
DisposalRecovered
Recovered by Space Shuttle Endeavour
STS-57
Recovery date1 July 1993 (1993-08)
Orbital parameters
Reference system Geocentric
Regime Low Earth
Eccentricity 0.00066
Perigee altitude 438 kilometres (272 mi)
Apogee altitude 447 kilometres (278 mi)
Inclination 28.5 degrees
Period 93.4 minutes
Epoch 2 August 1992, 20:00:00 UTC [1]

The European Retrievable Carrier (EURECA) was an uncrewed 4.5-tonne satellite with 15 experiments. [2] It was a European Space Agency (ESA) mission and the acronym was derived from Archimedes' bathtub revelation "Eureka!".

Contents

It was built by the German MBB-ERNO and had automatic material science cells as well as small telescopes for solar observation (including x-ray).

It was launched 31 July 1992 by Space Shuttle Atlantis during STS-46, and placed into an orbit at an altitude of 508 km (316 mi). EURECA was retrieved on 1 July 1993 by Space Shuttle Endeavour during STS-57 and returned to Earth. It was designed to fly five times with different experiments but the following flights were cancelled.

EURECA is one of the few uncrewed space vehicles that have been returned to the Earth unharmed. It has been on display at the Swiss Museum of Transport in Lucerne since 2000. [3]

Design

EURECA retrieval in 1993 EURECA STS-57.jpg
EURECA retrieval in 1993

EURECA was made of high-strength carbon-fiber struts and titanium nodal points joined together to form a framework of cubic elements. Thermal control on EURECA combined both active and passive heat transfer and radiation systems. Active heat transfer was achieved by means of a freon cooling loop which dissipated the thermal load through two radiators into space. The passive system made use of multilayer insulation blankets combined with electrical heaters.

The electrical subsystem was powered by deployable and retractable solar arrays together with four 40 amp-hour nickel-cadmium batteries. When EURECA was in the Shuttle cargo bay, power was supplied by the Shuttle. The modular attitude and orbit control subsystem (AOCS) maintained attitude and spacecraft orientation and stabilization. An orbit transfer assembly, consisting of four thrusters, was used to boost EURECA to its operational attitude of 515 km (320 mi) and return it to a retrievable orbit of about 300 km (190 mi).

EURECA was three-axis stabilized by means of a magnetic torque assembly together with a nitrogen reaction control assembly (RCA). Data handling was carried out by EURECAs data handling subsystem (DHS) supported by telemetry and command subsystems providing the link to the ground station.

Experiments

EURECA consisted of 15 experiments: [4] [5]

The WATCH instrument observed Cosmic X-rays in an extremely wide field of view, a 65 degree range capable of observing 1/4 of the sky. [6] The design is a Rotation Modulation Collimator, in which stripes of NaI(Tl) and CsI(Na) detectors make a phoswich. [7]

Results

WATCH monitored about 25 X-rays sources over the whole sky over the course of the mission, as well as detecting 19 cosmic gamma ray bursts. [8] Many of the gamma ray bursts were able to be localized to within 1 degree. [9]

In the summer of 2016, EURECA was transported to the Swiss Federal Laboratories for Materials Science and Technology (Empa) in Dübendorf near Zurich where X-ray scans of the satellite were taken. The goal was to find out how EURECA's 11-month exposure to space had affected its structure and selected experiments it carried. [10] EURECA was then brought back to the Swiss Museum of Transport in Lucerne and has since been exhibited in a new way, with both solar panels fully deployed for the first time. [11]

See also

Related Research Articles

<span class="mw-page-title-main">Spacecraft</span> Vehicle or machine designed to fly in space

A spacecraft is a vehicle that is designed to fly and operate in outer space. Spacecraft are used for a variety of purposes, including communications, Earth observation, meteorology, navigation, space colonization, planetary exploration, and transportation of humans and cargo. All spacecraft except single-stage-to-orbit vehicles cannot get into space on their own, and require a launch vehicle.

<i>Ulysses</i> (spacecraft) 1990 robotic space probe; studied the Sun from a near-polar orbit

Ulysses was a robotic space probe whose primary mission was to orbit the Sun and study it at all latitudes. It was launched in 1990 and made three "fast latitude scans" of the Sun in 1994/1995, 2000/2001, and 2007/2008. In addition, the probe studied several comets. Ulysses was a joint venture of the European Space Agency (ESA) and the United States' National Aeronautics and Space Administration (NASA), under leadership of ESA with participation from Canada's National Research Council. The last day for mission operations on Ulysses was 30 June 2009.

<i>Mars Observer</i> Failed NASA orbiter mission to Mars (1992–1993)

The Mars Observer spacecraft, also known as the Mars Geoscience/Climatology Orbiter, was a robotic space probe launched by NASA on September 25, 1992, to study the Martian surface, atmosphere, climate and magnetic field. On August 21, 1993, during the interplanetary cruise phase, communication with the spacecraft was lost, three days prior to the probe's orbital insertion. Attempts to re-establish communications with the spacecraft were unsuccessful.

<span class="mw-page-title-main">Spacelab</span> Temporary, reusable laboratory aboard the Space Shuttle

Spacelab was a reusable laboratory developed by European Space Agency (ESA) and used on certain spaceflights flown by the Space Shuttle. The laboratory comprised multiple components, including a pressurized module, an unpressurized carrier, and other related hardware housed in the Shuttle's cargo bay. The components were arranged in various configurations to meet the needs of each spaceflight.

<span class="mw-page-title-main">BeppoSAX</span> Italian-Dutch satellite used for X-ray astronomy

BeppoSAX was an Italian–Dutch satellite for X-ray astronomy which played a crucial role in resolving the origin of gamma-ray bursts (GRBs), the most energetic events known in the universe. It was the first X-ray mission capable of simultaneously observing targets over more than 3 decades of energy, from 0.1 to 300 kiloelectronvolts (keV) with relatively large area, good energy resolution and imaging capabilities. BeppoSAX was a major programme of the Italian Space Agency (ASI) with the participation of the Netherlands Agency for Aerospace Programmes (NIVR). The prime contractor for the space segment was Alenia while Nuova Telespazio led the development of the ground segment. Most of the scientific instruments were developed by the Italian National Research Council (CNR) while the Wide Field Cameras were developed by the Netherlands Institute for Space Research (SRON) and the LECS was developed by the astrophysics division of the European Space Agency's ESTEC facility.

<span class="mw-page-title-main">Goddard Space Flight Center</span> NASAs first space research laboratory

The Goddard Space Flight Center (GSFC) is a major NASA space research laboratory located approximately 6.5 miles (10.5 km) northeast of Washington, D.C. in Greenbelt, Maryland, United States. Established on May 1, 1959 as NASA's first space flight center, GSFC employs about 10,000 civil servants and contractors. Named for American rocket propulsion pioneer Robert H. Goddard, it is one of ten major NASA field centers. GSFC is partially within the former Goddard census-designated place; it has a Greenbelt mailing address.

<i>Pioneer 6</i>, <i>7</i>, <i>8</i>, and <i>9</i> Space probes launched from 1965 to 1969

Pioneer 6, 7, 8, and 9 were space probes in the Pioneer program, launched between 1965 and 1969. They were a series of solar-orbiting, spin-stabilized, solar cell- and battery-powered satellites designed to obtain measurements on a continuing basis of interplanetary phenomena from widely separated points in space. They were also known as Pioneer A, B, C, and D. The fifth was lost in a launch accident, and therefore did not receive a numerical designation.

<span class="mw-page-title-main">STS-57</span> 1993 American crewed spaceflight

STS-57 was a NASA Space Shuttle-Spacehab mission of Space ShuttleEndeavour that launched June 21, 1993, from Kennedy Space Center, Florida.

<span class="mw-page-title-main">Compton Gamma Ray Observatory</span> NASA space observatory designed to detect X-rays and gamma rays (1991–2000)

The Compton Gamma Ray Observatory (CGRO) was a space observatory detecting photons with energies from 20 keV to 30 GeV, in Earth orbit from 1991 to 2000. The observatory featured four main telescopes in one spacecraft, covering X-rays and gamma rays, including various specialized sub-instruments and detectors. Following 14 years of effort, the observatory was launched from Space Shuttle Atlantis during STS-37 on April 5, 1991, and operated until its deorbit on June 4, 2000. It was deployed in low Earth orbit at 450 km (280 mi) to avoid the Van Allen radiation belt. It was the heaviest astrophysical payload ever flown at that time at 16,300 kilograms (35,900 lb).

<span class="mw-page-title-main">Solar Maximum Mission</span> Satellite to investigate Solar phenomena

The Solar Maximum Mission satellite was designed to investigate Solar phenomena, particularly solar flares. It was launched on February 14, 1980. The SMM was the first satellite based on the Multimission Modular Spacecraft bus manufactured by Fairchild Industries, a platform which was later used for Landsats 4 and 5 as well as the Upper Atmosphere Research Satellite.

<span class="mw-page-title-main">EXOSAT</span> Space observatory

The European X-ray Observatory Satellite (EXOSAT), originally named HELOS, was an X-ray telescope operational from May 1983 until April 1986 and in that time made 1780 observations in the X-ray band of most classes of astronomical object including active galactic nuclei, stellar coronae, cataclysmic variables, white dwarfs, X-ray binaries, clusters of galaxies, and supernova remnants.

<span class="mw-page-title-main">Small Astronomy Satellite 3</span>

The Small Astronomy Satellite 3 was a NASA X-ray astronomy space telescope. It functioned from 7 May 1975 to 9 April 1979. It covered the X-ray range with four experiments on board. The satellite, built by the Johns Hopkins University Applied Physics Laboratory (APL), was proposed and operated by MIT's Center for Space Research (CSR). It was launched on a Scout vehicle from the Italian San Marco platform near Malindi, Kenya, into a low-Earth, nearly equatorial orbit. It was also known as Explorer 53, as part of NASA's Explorer program.

<span class="mw-page-title-main">OSO 7</span>

OSO 7 or Orbiting Solar Observatory 7, before launch known as OSO H is the seventh in the series of American Orbiting Solar Observatory satellites launched by NASA between 1962 and 1975. OSO 7 was launched from Cape Kennedy on 29 September 1971 by a Delta N rocket into a 33.1° inclination, low-Earth orbit, and re-entered the Earth's atmosphere on 9 July 1974. It was built by the Ball Brothers Research Corporation (BBRC), now known as Ball Aerospace, in Boulder Colorado.

<span class="mw-page-title-main">Ariel VI</span>

Ariel VI, known pre-launch as UK-6, was a British and American satellite launched in 1979 as part of the Ariel programme. It was operated by the Science Research Council, which became the Science and Engineering Research Council in 1981. Ariel VI was used for astronomical research and provided data until February 1982. It was the last Ariel satellite to be launched.

<span class="mw-page-title-main">OSO 3</span>

OSO 3, or Third Orbiting Solar Observatory was launched on March 8, 1967, into a nearly circular orbit of mean altitude 550 km, inclined at 33° to the equatorial plane. Its on-board tape recorder failed on June 28, 1968, allowing only the acquisition of sparse real-time data during station passes thereafter; the last data were received on November 10, 1969. OSO 3 reentered the Earth's atmosphere and burned up on April 4, 1982.

<span class="mw-page-title-main">History of X-ray astronomy</span>

The history of X-ray astronomy begins in the 1920s, with interest in short wave communications for the U.S. Navy. This was soon followed by extensive study of the earth's ionosphere. By 1927, interest in the detection of X-ray and ultraviolet (UV) radiation at high altitudes inspired researchers to launch Goddard's rockets into the upper atmosphere to support theoretical studies and data gathering. The first successful rocket flight equipped with instrumentation able to detect solar ultraviolet radiation occurred in 1946. X-ray solar studies began in 1949. By 1973 a solar instrument package orbited on Skylab providing significant solar data.

<span class="mw-page-title-main">TD-1A</span>

TD-1A, or Thor-Delta 1A, was a European astrophysical research satellite which was launched in 1972. Operated by the European Space Research Organisation, TD-1A made astronomical surveys primarily in the ultraviolet, but also using x-ray and gamma ray detectors.

<span class="mw-page-title-main">ESRO 2B</span> Research satellite

ESRO-2B or Iris or sometimes ESRO II, was a European astrophysical spin-stabilised research satellite which was launched in 1968. Operated by the European Space Research Organisation, ESRO 2B made astronomical surveys primarily in x-ray and solar particles detectors.

<span class="mw-page-title-main">Cosmic Ray Subsystem</span> Instrument aboard the Voyager 1 and Voyager 2 spacecraft

Cosmic Ray Subsystem is an instrument aboard the Voyager 1 and Voyager 2 spacecraft of the NASA Voyager program, and it is an experiment to detect cosmic rays. The CRS includes a High-Energy Telescope System (HETS), Low-Energy Telescope System (LETS), and The Electron Telescope (TET). It is designed to detect energetic particles and some of the requirements were for the instrument to be reliable and to have enough charge resolution. It can also detect the energetic particles like protons from the Galaxy or Earth's Sun.

References

  1. "NASA – NSSDCA – Spacecraft – Trajectory Details". nssdc.gsfc.nasa.gov. Archived from the original on 2019-07-26. Retrieved 2018-05-01.
  2. "Archived copy" (PDF). Archived from the original (PDF) on 2007-09-30. Retrieved 2011-04-12.{{cite web}}: CS1 maint: archived copy as title (link)
  3. "From Space to Lucerne". Eureca – a satellite on the road (again)!. Archived from the original on 19 May 2020. Retrieved 5 June 2017 via YouTube.
  4. EURECA Scientific Results, Advances in Space Research, Vol. 16, Issue 8 (1995) 1–140.
  5. "The European Retrievable Carrier (EURECA) mission". Archived from the original on 2020-10-18. Retrieved 2020-11-09.
  6. "The European Retrievable Carrier (EURECA) mission". heasarc.gsfc.nasa.gov. Archived from the original on 2019-07-26. Retrieved 2018-07-23.
  7. "The European Retrievable Carrier (EURECA) mission". heasarc.gsfc.nasa.gov. Archived from the original on 2019-07-26. Retrieved 2018-07-23.
  8. "The European Retrievable Carrier (EURECA) mission". heasarc.gsfc.nasa.gov. Archived from the original on 2019-07-26. Retrieved 2018-07-23.
  9. "The European Retrievable Carrier (EURECA) mission". heasarc.gsfc.nasa.gov. Archived from the original on 2019-07-26. Retrieved 2018-07-23.
  10. "Eureca X-Ray Scan". Eureca – a satellite on the road (again)!. Archived from the original on 22 April 2020. Retrieved 5 June 2017 via YouTube.
  11. "EURECA's last journey to Empa and back to Lucerne". Eureca – a satellite on the road (again)!. Archived from the original on 23 April 2020. Retrieved 5 June 2017 via YouTube.