 | |
 Latest 1403 printer | |
| Developer | IBM |
|---|---|
| Type | Line printer (Chain printer) |
| Release date | 1959 |
| Discontinued | 1983 |
| Predecessor | IBM 407, IBM 716 |
| Successor | IBM 3203, IBM 3211 |
| Related | IBM 1132, IBM 1443 |
The IBM 1403 line printer was introduced as part of the IBM 1401 computer in 1959 and had an especially long life in the IBM product line.
The original model can print 600 lines of text per minute and can skip blank lines at up to 75 inches per second (190 cm/s), while the model 3 can print at up to 1400 lines per minute. The standard model has 120 print positions. An additional 12 positions are available as an option. A print chain with up to 15 copies of the character set spins horizontally in front of the ribbon and paper. Hammers strike the paper from behind at exactly the right moment to print a character as it goes by. In later models, the print chain is replaced by a print train; print slugs instead of being mounted on a chain are placed in a track.
The 1403 chain or train contains 240 characters, however numerous duplications allow a line to be printed in less than the 0.4 s required for one full rotation. The original standard "A" chain contains 48 different characters, repeated five times each. A "preferred character set" variant used in later models prints the same 48 characters, but varies the number of appearances: 10 digits appear eight times each, 26 upper-case letters appear four times each, and 12 special characters . , - * % $ / & # @ ⌑ ⧧ [note 1] appear eight (first four), four (middle four) or two (last four characters) times each. [1] : 25 Special chains or trains can be ordered for other character sets. Scientific users, for example, can use a chain that has the left parenthesis, the right parenthesis, and the plus sign in place of the per cent sign (%), the lozenge (⌑), [note 2] and the ampersand (&). The numerics chain has 15 copies each of only 16 characters. The "T" chain for general text has two copies of 120 characters, including upper-and lower-case letters and numerous special symbols.
The ink ribbon is a long roll the width of the print area positioned between the print chain and the paper. The roll comes in two parts: the feeder roll and take-up roll. The roll is constantly wound and rewound during printing.
Like most IBM printers of the era, the 1403 uses fan-folded paper with perforated edges for tractor feeding. A carriage control tape or, later, a buffer, under program control, [note 3] specifies form length and the form line where printing on a new page is to begin so that paper of various sizes can be used.
The overstrike capability of the printer can be used to generate a wide range of grey-scale equivalents. Many images have been scanned, converted to text and therefore can be reproduced on the 1403, most notably the Mona Lisa. [2] [3]
These are noisy machines, especially when the cover is raised. It is possible to create text that uses the timing of the print hammers to generate desired frequencies and thus play recognizable music when that text is printed. [4]
Prior to the introduction of the model 1403, IBM printers utilized technology originally developed for their line of accounting machines. Models 402 and 405 use type bars. [5] These are vertical bars, one for each print position. Each bar is one character wide with either the entire alphabet, including numerals and symbols, or just numerals & symbols only, molded into the front surface, in a single column. In printing, each bar is raised up until the correct character for that print position is opposite the paper, whereupon the bar is pushed toward the paper, so that the correct numeral or letter pressed against the ribbon, striking the paper much the way type slugs leave an impression on paper in a standard typewriter. This action is relatively slow, as it took time for each bar to be brought up into the correct position and then drop back down in preparation to print the next line.
In the model 407, each type bar is replaced with a type wheel, with the characters along the outside edge. To print, each wheel is rotated to the correct character position, then the entire wheel is pushed forward to strike the paper. This action is somewhat faster because the wheels are less massive than the bars and can be positioned more rapidly, allowing printing at up to 150 lines per minute. Although this is slow by later printing standards, the speed at which electromechanical accounting machines can read punched cards and perform their basic arithmetic functions means that no faster printing speeds are needed. The IBM 1132 was the last printer manufactured by IBM to use this technology.
When faster computers were developed, however, the speed of card reading, magnetic tape, and early disk drives, along with newer high speed transistorized circuits, means that processing can be done at a much higher speed, and a faster print mechanism is needed to match the resulting productivity. [6] IBM's early computers, such as the IBM 701, were developed for higher speed calculation than was possible with earlier electromechanical calculating machines. They did not have a demand for high speed printing, as the results of massive calculations produced very little printed output. Around the time that the 1403 was introduced, IBM's line of computers had been largely divided into two lines, "scientific" and "business." However, as newer computers were being used for a greater variety of purposes, there was a need to print a greater variety of characters from a single device, including upper and lower case alphabets. With type bars and type wheels, changing character sets is impractical. The advent of the chain printer, as used in the 1403, allows the type chain assembly to be removed and replaced within a few minutes. With the cover open, the print unit is unlatched and swung open, the ribbon roll covering the front of the chain is removed, whereupon the print chain assembly can be unlatched and lifted out.
When it was first introduced, the 1401 computer system, of which the printer was a part, leased for $6500 per month (equivalent to $54,000 in 2017) and IBM received 3000 orders in the first month. [7] [ failed verification ]
Chain printing allows a single set of characters to pass horizontally across the front of the paper at high speed, with a ribbon the full width of the paper passing vertically between the chain and the front of the paper. Instead of pressing the characters toward the paper, individual type hammers behind the paper, one for each column on the page (120 or 132), push the paper from behind, causing the front of the paper at that spot to push forward into the ribbon with the character behind it, causing the paper to strike the character, rather than the other way around, as had been done in the past. Each hammer is moved by a powerful electromagnet, with its coil connected to a high current drive circuit, such that the hammer can be forced out to hit the paper within only a few milliseconds, at exactly the right time to strike the correct character on the chain as it came by.
The columns on the paper are spaced at the standard typewriter pitch of 10 characters per inch, 0.1″ per column. The characters on the chain are spaced 0.1505″ apart, so that for each 0.001″ movement of the chain, a new character aligns with a print column. Moving at 7.5 feet per second, one hammer might fire each 11.1 μs , but they were never exactly simultaneous. [8]
Starting with the 1403 model 2 attached to the IBM 2821 Control Unit, most of IBM's hammer-based printers [note 4] were equipped with the Universal Character Set (UCS) feature. [9] : 26 [10] : 46
IBM provided software support for impact printers with interchangeable print elements, e.g., chains, trains. The control unit has a UCS buffer [note 5] containing the code point for each position of the print element. The control unit can optionally fold lower case letters to upper case for printing elements that have no lower case letters.
The software can load the UCS buffer with the UCS Load commands (CCW operation codes) 'FB'x (no folding) and 'F3'x (folding). [10] : 50The IBM 1403 has the following models:
Only models 2, 3, 7 and N1 can be attached to the IBM System/360 and its successors. Attachment is generally by means of the IBM 2821 Control Unit, but some 360 models include an integrated control unit for direct 1403 connection.
Only the Model 6 (340 LPM) or the Model 7 (600 LPM) can be attached to an IBM 1130. [11]
The 1404 printer is an IBM impact printer with "all the basic features of the IBM 1403 Printer," with the added ability to print on card documents, such as punched cards. [12]
The 1404 can print on continuous forms at 600 lines per minute, and on cards at 800 cards per minute. The mechanism can handle cards ranging from 51 columns to a full 80 columns, and can print cards two at a time. Up to 25 lines can be printed on a card. The printer can also interpret cards, that is, read the card and print what was punched.
The 1404 was originally introduced in 1960 as a peripheral for the IBM 1401 computing system. [13] It was later able to attach to a System/360 through an IBM 2821 control unit. [14]
The IBM 1416 is an interchangeable train cartridge introduced with the 1403-N1 and also used with the IBM 3203. This means instead of using a chain of linked characters, the printer uses a train of unlinked characters. The cartridge allows the operator to change the font and/or character set arrangement being used by the printer. It is also possible to create a custom train with unique characters. Note that while the IBM 1403 Models 2 and 7 do offer a feature known as the Interchangeable Train Cartridge Adapter, which allows the operator to easily remove and insert a chain cartridge with a different font or character set arrangement, this feature does not have a separate machine type. [15]
In computing, a printer is a peripheral machine which makes a persistent representation of graphics or text, usually on paper. While most output is human-readable, bar code printers are an example of an expanded use for printers. Different types of printers include 3D printers, inkjet printers, laser printers, and thermal printers.
A line printer prints one entire line of text before advancing to another line. Most early line printers were impact printers.
The IBM 1401 is a variable-wordlength decimal computer that was announced by IBM on October 5, 1959. The first member of the highly successful IBM 1400 series, it was aimed at replacing unit record equipment for processing data stored on punched cards and at providing peripheral services for larger computers. The 1401 is considered to be the Ford Model-T of the computer industry, because it was mass-produced and because of its sales volume. Over 12,000 units were produced and many were leased or resold after they were replaced with newer technology. The 1401 was withdrawn on February 8, 1971.
The IBM 370 printer was used on the IBM 305 RAMAC computer system, introduced by IBM on September 14, 1956. The 370 was connected to the 305 by a serial data line from the S track of the computer's drum memory and printed 80-columns with a punched tape controlled carriage. Line formatting was programmed by inserting wire jumpers into a plugboard control panel.
The UNIVAC Solid State was a magnetic drum-based solid-state computer announced by Sperry Rand in December 1958 as a response to the IBM 650. It was one of the first computers to be (nearly) entirely solid-state, using 700 transistors, and 3000 magnetic amplifiers (FERRACTOR) for primary logic, and 20 vacuum tubes largely for power control. It came in two versions, the Solid State 80 and the Solid State 90. In addition to the "80/90" designation, there were two variants of the Solid State – the SS I 80/90 and the SS II 80/90. The SS II series included two enhancements – the addition of 1,280 words of core memory and support for magnetic tape drives. The SS I had only the standard 5,000-word drum memory described in this article and no tape drives.
The IBM 407 Accounting Machine, introduced in 1949, was one of a long line of IBM tabulating machines dating back to the days of Herman Hollerith. It had a card reader and printer; a summary punch could be attached. Processing was directed by a control panel.
The IBM 1132 line printer was the normal printer for the IBM 1130 computer system. It printed 120 character lines at 80 lines per minute. The character set consisted of numbers, upper-case letters and some special characters.
The IBM System/3 was an IBM midrange computer introduced in 1969, and marketed until 1985. It was produced by IBM Rochester in Minnesota as a low-end business computer aimed at smaller organizations that still used IBM 1400 series computers or unit record equipment. The first member of what IBM refers to as their "midrange" line, it also introduced the RPG II programming language. It is the first ancestor in the product line whose current version is the IBM i series and includes the highly successful AS/400.
A dot matrix printer is an impact printer that prints using a fixed number of pins or wires. Typically the pins or wires are arranged in one or several vertical columns. The pins strike an ink-coated ribbon and force contact between the ribbon and the paper, so that each pin makes a small dot on the paper. The combination of these dots forms a dot matrix image. They were also known as serial dot matrix printers.
The IBM 557 Alphabetic Interpreter allowed holes in punched cards to be interpreted and the punched card characters printed on any row or column, selected by a control panel. Introduced in 1954, the machine was a synchronous system where brushes would glide over a hole in a punched card and contact a brass roller thereby setting up part of a character code.
The Diablo 630 is a discontinued daisy wheel style computer printer sold by the Diablo Data Systems division of the Xerox Corporation beginning in 1980. The printer is capable of letter-quality printing; that is, its print quality is equivalent to the quality of an IBM Selectric typewriter or printer, the de facto quality standard of the time.
IBM 7070 is a decimal-architecture intermediate data-processing system that was introduced by IBM in 1958. It was part of the IBM 700/7000 series, and was based on discrete transistors rather than the vacuum tubes of the 1950s. It was the company's first transistorized stored-program computer.
The IBM 2780 and the IBM 3780 are devices developed by IBM to perform remote job entry (RJE) and other batch functions over telephone lines; they communicate with the mainframe via Binary Synchronous Communications and replaced older terminals using synchronous transmit-receive (STR). In addition, IBM has developed workstation programs for the 1130, 360/20, 2922, System/360 other than 360/20, System/370 and System/3.
The English Electric System 4 was a mainframe computer announced in 1965. It was derived from the RCA Spectra 70 range, itself a variant of the IBM System 360 architecture.
The IBM 402 and IBM 403 Accounting Machines were tabulating machines introduced by International Business Machines in the late 1940s.
The IBM 3800 is a discontinued continuous forms laser printer designed and manufactured by IBM. It is significant as a product because it was both the first laser printer manufactured by IBM, and the first commercially available laser printer.
The IBM 421 accounting machine saw use in the 1960s.
The IBM 2922 Programmable Terminal is a Remote Job Entry (RJE) terminal introduced by IBM in 1972. The 2922 communicates using Binary Synchronous Communications (Bisync).
The IBM 1443 Printer is an obsolete computer line printer used in the punched card era. It was offered in three models: Models 1, 2 and N1; the last two could print up to 240 lines per minute (LPM) with a full character set.
IBM developed, manufactured and sold hammer-based impact printers that used either type bars, a chain, a train, or a band to create printed output from 1959 till 1999, replacing the older print drum technology,. Over the course of this time they produced a wide variety of these line printers. This article will detail the most significant ones. Note that while IBM initially described band printers as belt printers, they are effectively the same thing.
{{cite book}}: |work= ignored (help){{cite book}}: |work= ignored (help)
IBM mini/midrange computers, workstations, and servers | |||
|---|---|---|---|
| IBM 1130 | |||
| IBM 1400 | |||
| IBM System | |||
| AS/400 |
| ||
| RS/6000 |
| ||
| Other | |||
* Also based on the System/36 | |||
