IBM RS64

Last updated

The IBM RS64 is a family of microprocessors introduced in the mid 1990s, and used in IBM's RS/6000 and AS/400 servers.

Contents

These microprocessors implement the "Amazon", or "PowerPC-AS", instruction set architecture (ISA). Amazon is a superset of the PowerPC instruction set, with the addition of special features not in the PowerPC specification, mainly derived from POWER2 [ citation needed ] and the original AS/400 processor, and has been 64-bit from the start. The processors in this family are optimized for commercial workloads (integer performance, large caches, branches) and do not feature the strong floating point performance of the processors in the POWER family, its sibling.

The RS64 family was phased out soon after the introduction of the POWER4, which was developed to unite the RS64 and POWER families.

History

In 1990, the AS/400 engineering team at IBM Rochester began work on a new architecture known as C-RISC (Commercial RISC) to replace the IMPI architecture of the AS/400. [1] [2] C-RISC was an evolution of the IMPI instruction set, extending the address space to 96 bits and adding some RISC instructions to speed up the more computationally intensive commercial applications that were being created for AS/400s. IBM president Jack Kuehler wanted them to use PowerPC, but they resisted, arguing that the existing 32/64-bit PowerPC instruction set would not enable a viable transition for OS/400 software and that the existing instruction set required extensions for the commercial applications on the AS/400. At Kuehler's insistence, a team at Rochester led by Frank Soltis investigated the feasibility of extending the PowerPC instruction set to support the needs of the AS/400 platform. These extensions became known as Amazon and were selected by IBM executive management for further development over continued development of C-RISC. [3]

At the same time, the RS/6000 developers were broadly expanding their product line to include systems which spanned from low-end workstations, to mainframe competitor-large enterprise SMP systems, to clustered RS/6000-SP2 supercomputing systems. PowerPC processors developed in the AIM alliance suited the low-end RISC workstation and small server space well. But mainframe and large clustered supercomputing systems required more performance and reliability, availability and serviceability features than processors designed for Apple Power Macs. Multiple processor designs were required to simultaneously meet the requirements of the cost-focused Apple Power Mac, high-performance and RAS RS/6000 systems, and the AS/400 transition to PowerPC.

Amazon was extended to support those features as well, so that processors could be designed for use in both high-end RS/6000 and AS/400 machines.

The project to develop the first such processor was "Bellatrix" (the name of a star in the Orion constellation, also called the "Amazon Star"). The Bellatrix project was extremely ambitious in its pervasive use of self-timed & pulse based circuits and the EDA tools required to support this design strategy, and was eventually terminated. To address technical workstation, supercomputer, and engineering/scientific markets, IBM Austin (the home of the RS/6000s) then started developing a time-to-market single-chip version of the Power2 (P2SC) in parallel with the development of a sophisticated 64-bit PowerPC processor with the POWER2 extensions and twin sophisticated MAF floating point units (the POWER3/630). To address RS/6000 commercial applications and AS/400 systems, IBM Rochester (the home of the AS/400s) started developing the first of the high-end 64-bit PowerPC processors with AS/400 extensions, and IBM Endicott started developing a low-end single-chip PowerPC processor with AS/400 extensions.

Cobra and Muskie

In 1995, IBM released the Cobra, or A10 processor, the first full implementation of PowerPC AS, for the IBM AS/400 systems. It was a single-chip processor running at 50-77 MHz. It was designed with a semi-custom methodology, as a consequence of time-to-market constraints. The die contains 4.7 million transistors and measures 14.6 mm by 14.6 mm (213 mm2). It was fabricated by IBM in their CMOS 5L process, a 0.5 µm, four-layer-metal CMOS process. It used a 3.0 V power supply and dissipated 17.7 W maximum, 13.4 W minimum at 77 MHz. It was packaged in a 625-contact ceramic ball grid array (CBGA) that measured 32 mm by 32 mm.

Cobra was preceded by a simplified implementation known as Cobra-Lite in 1994, which was used in the first IBM Advanced/36 systems. [1] It lacked 17 instructions from the full PowerPC AS ISA which were not needed for the Advanced/36.

In 1996, IBM released the high-end, 4-way SMP, multi-chip version called Muskie, A25 or A30 in AS/400 systems. It ran at 125-154 MHz. It was manufactured on a BiCMOS fabrication process.

These processors were only used in AS/400 and Advanced/36 machines.

RS64

IBM RS64 Apache IBM RS64 Apache.png
IBM RS64 Apache

The RS64 or Apache was introduced in 1997. It was developed from "Cobra" and "Muskie" but included a more complete PowerPC ISA and was therefore set to be used in RS/6000 machines as well as in AS/400 systems. It featured 128 KB total on-die L1 cache, 4 MB full speed off-chip L2 on a 128 bit bus, and a clock of 125 MHz. It scaled to a 12 processor SMP configuration in IBM's machines.

RS64 was called A35 in AS/400 and was one time referred to as the PowerPC 625, between the defunct PowerPC 620 and the PowerPC 630 (later renamed POWER3).

It was manufactured with a BiCMOS fabrication process.

RS64-II

IBM RS64-II IBM RS64-II.png
IBM RS64-II

The RS64-II or Northstar was introduced at 262 MHz in 1998 with 8 MB of full speed L2 on a 256 bit 6XX bus (also used in PowerPC 620 and POWER3). Processor boards containing 4 RS64-II's could be swapped into machines designed for similar 4-way RS64 boards, avoiding a "fork lift upgrade". The RS64-II contained 12.5 million transistors, was 162 mm² large and drew 27 Watts maximum power. Manufacturing changed to a 0.35 μm CMOS fabrication.

RS64-II was the first mass-market processor to implement multithreading. Essentially, each chip stores state information for 2 threads at any given time and appears to be two processors to the OS. One logical processor runs what is called the foreground thread. When this thread encounters a high latency event (L2 cache miss, etc.) the background thread is switched to, on the second logical processor from the OS's point of view. In the event of a "less long" latency event (L1 miss, etc.), thread switching will only occur if the background thread is ready to execute. If the background thread is also waiting for a miss, thread switching will not occur. IBM calls this scheme "coarse grained multithreading". It is not exactly the same thing as simultaneous multithreading as found on later Pentium 4 processors. An IBM paper notes that the coarse grained scheme is a better fit for an in-order architecture like RS64.

RS64-II was called A50 in AS/400 systems.

RS64-III

IBM RS64-III DCM IBM RS64-III DCM.png
IBM RS64-III DCM

The RS64-III or Pulsar was introduced in 1999 at 450 MHz. Key changes included larger 128 KiB L1 instruction and data caches, improved branch prediction accuracy and reduced branch misprediction penalties of zero or one cycle. The RS64-III has a five-stage pipeline and a 256 bit wide L2 cache bus, which provided the processor with 14.4 GB/s of bandwidth from the 8 MiB L2 cache, implemented with 225 MHz DDR SRAMs.

The RS64-III has 34 million transistors, a die size of 140 mm², and is manufactured on the 0.22 μm CMOS 7S process with six levels of copper interconnect.

In 2000, IBM launched a refined version called IStar manufactured with a SOI fabrication process with copper interconnects, which increased the processor's clock frequency to 600 MHz. This was the first processor implemented in this process. Architecturally however, the IStar was identical to Pulsar.

RS64-IV

IBM RS64-IV SCM IBM RS64-IV SCM.png
IBM RS64-IV SCM

The RS64-IV or Sstar was introduced in 2000 at 600 MHz, later increased to 750 MHz. Up to 16 GB DDR L2 was supported in the same manner as the RS64-III (19.2 GB/s bandwidth). The RS64-IV had 44 million transistors and was 128 mm² large manufactured on a 0.18 μm process. Unlike POWER, energy consumption remained low, at under 15 watts per core.

For a time, while the POWER line stagnated at half the clock speed of its competitors, the RS64 family was at the top of the IBM large SMP UNIX server line. The integer / commercial workload performance of the RS-64 IV was similar to the Sun Microsystems processors with which it competed, though its floating point power was not comparable to the contemporary POWER3-II, which remained reasonably competitive throughout its lifecycle.

Related Research Articles

<span class="mw-page-title-main">Pentium II</span> Intel microprocessor

The Pentium II brand refers to Intel's sixth-generation microarchitecture ("P6") and x86-compatible microprocessors introduced on May 7, 1997. Containing 7.5 million transistors, the Pentium II featured an improved version of the first P6-generation core of the Pentium Pro, which contained 5.5 million transistors. However, its L2 cache subsystem was a downgrade when compared to the Pentium Pros. It is a single-core microprocessor.

The PowerPC 7xx is a family of third generation 32-bit PowerPC microprocessors designed and manufactured by IBM and Motorola. This family is called the PowerPC G3 by Apple Computer, which introduced it on November 10, 1997. The term "PowerPC G3" is often, and incorrectly, imagined to be a microprocessor when in fact a number of microprocessors from different vendors have been used. Such designations were applied to Mac computers such as the PowerBook G3, the multicolored iMacs, iBooks and several desktops, including both the Beige and Blue and White Power Macintosh G3s. The low power requirements and small size made the processors ideal for laptops and the name lived out its last days at Apple in the iBook.

PowerPC G4 is a designation formerly used by Apple and Eyetech to describe a fourth generation of 32-bit PowerPC microprocessors. Apple has applied this name to various processor models from Freescale, a former part of Motorola. Motorola and Freescale's proper name of this family of processors is PowerPC 74xx.

<span class="mw-page-title-main">POWER5</span> 2004 family of multiprocessors by IBM

The POWER5 is a microprocessor developed and fabricated by IBM. It is an improved version of the POWER4. The principal improvements are support for simultaneous multithreading (SMT) and an on-die memory controller. The POWER5 is a dual-core microprocessor, with each core supporting one physical thread and two logical threads, for a total of two physical threads and four logical threads.

The POWER1 is a multi-chip CPU developed and fabricated by IBM that implemented the POWER instruction set architecture (ISA). It was originally known as the RISC System/6000 CPU or, when in an abbreviated form, the RS/6000 CPU, before introduction of successors required the original name to be replaced with one that used the same naming scheme (POWERn) as its successors in order to differentiate it from the newer designs.

SPARC64 is a microprocessor developed by HAL Computer Systems and fabricated by Fujitsu. It implements the SPARC V9 instruction set architecture (ISA), the first microprocessor to do so. SPARC64 was HAL's first microprocessor and was the first in the SPARC64 brand. It operates at 101 and 118 MHz. The SPARC64 was used exclusively by Fujitsu in their systems; the first systems, the Fujitsu HALstation Model 330 and Model 350 workstations, were formally announced in September 1995 and were introduced in October 1995, two years late. It was succeeded by the SPARC64 II in 1996.

<span class="mw-page-title-main">POWER4</span> 2001 family of microprocessors by IBM

The POWER4 is a microprocessor developed by International Business Machines (IBM) that implemented the 64-bit PowerPC and PowerPC AS instruction set architectures. Released in 2001, the POWER4 succeeded the POWER3 and RS64 microprocessors, enabling RS/6000 and eServer iSeries models of AS/400 computer servers to run on the same processor, as a step toward converging the two lines. The POWER4 was a multicore microprocessor, with two cores on a single die, the first non-embedded microprocessor to do so. POWER4 Chip was first commercially available multiprocessor chip. The original POWER4 had a clock speed of 1.1 and 1.3 GHz, while an enhanced version, the POWER4+, reached a clock speed of 1.9 GHz. The PowerPC 970 is a derivative of the POWER4.

<span class="mw-page-title-main">RISC Single Chip</span>

The RISC Single Chip, or RSC, is a single-chip microprocessor developed and fabricated by International Business Machines (IBM). The RSC was a feature-reduced single-chip implementation of the POWER1, a multi-chip central processing unit (CPU) which implemented the POWER instruction set architecture (ISA). It was used in entry-level workstation models of the IBM RS/6000 family, such as the Model 220 and 230.

<span class="mw-page-title-main">POWER3</span> 1998 family of microprocessors by IBM

The POWER3 is a microprocessor, designed and exclusively manufactured by IBM, that implemented the 64-bit version of the PowerPC instruction set architecture (ISA), including all of the optional instructions of the ISA such as instructions present in the POWER2 version of the POWER ISA but not in the PowerPC ISA. It was introduced on 5 October 1998, debuting in the RS/6000 43P Model 260, a high-end graphics workstation. The POWER3 was originally supposed to be called the PowerPC 630 but was renamed, probably to differentiate the server-oriented POWER processors it replaced from the more consumer-oriented 32-bit PowerPCs. The POWER3 was the successor of the P2SC derivative of the POWER2 and completed IBM's long-delayed transition from POWER to PowerPC, which was originally scheduled to conclude in 1995. The POWER3 was used in IBM RS/6000 servers and workstations at 200 MHz. It competed with the Digital Equipment Corporation (DEC) Alpha 21264 and the Hewlett-Packard (HP) PA-8500.

<span class="mw-page-title-main">POWER2</span> 1993 family of microprocessors by IBM

The POWER2, originally named RIOS2, is a processor designed by IBM that implemented the POWER instruction set architecture. The POWER2 was the successor of the POWER1, debuting in September 1993 within IBM's RS/6000 systems. When introduced, the POWER2 was the fastest microprocessor, surpassing the Alpha 21064. When the Alpha 21064A was introduced in 1993, the POWER2 lost the lead and became second. IBM claimed that the performance for a 62.5 MHz POWER2 was 73.3 SPECint92 and 134.6 SPECfp92.

The PowerPC 600 family was the first family of PowerPC processors built. They were designed at the Somerset facility in Austin, Texas, jointly funded and staffed by engineers from IBM and Motorola as a part of the AIM alliance. Somerset was opened in 1992 and its goal was to make the first PowerPC processor and then keep designing general purpose PowerPC processors for personal computers. The first incarnation became the PowerPC 601 in 1993, and the second generation soon followed with the PowerPC 603, PowerPC 604 and the 64-bit PowerPC 620.

<span class="mw-page-title-main">Alpha 21164</span> Microprocessor

The Alpha 21164, also known by its code name, EV5, is a microprocessor developed and fabricated by Digital Equipment Corporation that implemented the Alpha instruction set architecture (ISA). It was introduced in January 1995, succeeding the Alpha 21064A as Digital's flagship microprocessor. It was succeeded by the Alpha 21264 in 1998.

<span class="mw-page-title-main">Alpha 21264</span> RISC microprocessor

The Alpha 21264 is a Digital Equipment Corporation RISC microprocessor launched on 19 October 1998. The 21264 implemented the Alpha instruction set architecture (ISA).

<span class="mw-page-title-main">PA-8000</span> HP microprocessor

The PA-8000 (PCX-U), code-named Onyx, is a microprocessor developed and fabricated by Hewlett-Packard (HP) that implemented the PA-RISC 2.0 instruction set architecture (ISA). It was a completely new design with no circuitry derived from previous PA-RISC microprocessors. The PA-8000 was introduced on 2 November 1995 when shipments began to members of the Precision RISC Organization (PRO). It was used exclusively by PRO members and was not sold on the merchant market. All follow-on PA-8x00 processors are based on the basic PA-8000 processor core.

The x704 is a microprocessor that implements the 32-bit version of the PowerPC instruction set architecture (ISA) developed by Exponential Technology. The microprocessor was notable for its high clock frequency in the range of 400 to 533 MHz, its use of bipolar transistors for logic and CMOS circuits for memory, and its failure to see use in an Apple Macintosh, the opposite of what industry observers such as Microprocessor Report expected. Exponential Technology eventually failed as a result of the x704's lack of success, but some of its former employees founded Intrinsity, a start-up that developed a high clock frequency MIPS implementation, FastMATH.

The IBM A2 is an open source massively multicore capable and multithreaded 64-bit Power ISA processor core designed by IBM using the Power ISA v.2.06 specification. Versions of processors based on the A2 core range from a 2.3 GHz version with 16 cores consuming 65 W to a less powerful, four core version, consuming 20 W at 1.4 GHz.

IBM POWER is a reduced instruction set computer (RISC) instruction set architecture (ISA) developed by IBM. The name is an acronym for Performance Optimization With Enhanced RISC.

IBM Power microprocessors are designed and sold by IBM for servers and supercomputers. The name "POWER" was originally presented as an acronym for "Performance Optimization With Enhanced RISC". The Power line of microprocessors has been used in IBM's RS/6000, AS/400, pSeries, iSeries, System p, System i, and Power Systems lines of servers and supercomputers. They have also been used in data storage devices and workstations by IBM and by other server manufacturers like Bull and Hitachi.

References

  1. 1 2 Frank G. Soltis (1997). Inside the AS/400, Second Edition. Duke Press. ISBN   978-1882419661.
  2. Leif Svalgaard (2003-10-08). "Re: Re: MI emulator". MI400 (Mailing list). Retrieved 2021-02-26.
  3. Adam T. Stallman; Frank G. Soltis (July 1, 1995). "Inside the PowerPC AS". System iNEWS Magazine. Archived from the original on August 31, 2013.

Further reading