POWER1

POWER1
General information
Launched	1990
Designed by	IBM
Architecture and classification
Instruction set	POWER ISA
History
Successor	POWER2

Last updated November 06, 2021

The POWER1 is a multi-chip CPU developed and fabricated by IBM that implemented the POWER instruction set architecture (ISA). It was originally known as the RISC System/6000 CPU or, when in an abbreviated form, the RS/6000 CPU, before introduction of successors required the original name to be replaced with one that used the same naming scheme (POWERn) as its successors in order to differentiate it from the newer designs.

History

The POWER1 was introduced in 1990, with the introduction of the IBM RS/6000 POWERserver servers and POWERstation workstations, which featured the POWER1 clocked at 20, 25 or 30 MHz. The POWER1 received two upgrades, one in 1991, with the introduction of the POWER1+ and in 1992, with the introduction of POWER1++. These upgraded versions were clocked higher than the original POWER1, made possible by improved semiconductor processes. The POWER1+ was clocked slightly higher than the original POWER1, at frequencies of 25, 33 and 41 MHz, while the POWER1++ took the microarchitecture to its highest frequencies — 25, 33, 41.6, 45, 50 and 62.5 MHz. In September 1993, the POWER1 and its variants was succeeded by the POWER2 (known briefly as the "RIOS2"), an evolution of the POWER1 microarchitecture.

The direct derivatives of the POWER1 are the RISC Single Chip (RSC), feature-reduced single-chip variant for entry-level RS/6000 systems, and the RAD6000, a radiation-hardened variant of the RSC for space applications. An indirect derivative of the POWER1 is the PowerPC 601, a feature-reduced variant of the RSC intended for consumer applications.

The POWER1 is notable as it represented a number of firsts for IBM and computing in general. It was IBM's first RISC processor intended for high-end applications (the ROMP was considered a commercial failure and was not used in high-end workstations), it was the first to implement the then new POWER instruction set architecture and it was IBM's first successful RISC processor. For computing firsts, the POWER1 would be known for being the first CPU to implement some form of register renaming and out-of-order execution, a technique that improves the performance of superscalar processors but was previously reserved for mainframes.

The POWER1 was also the origin for the highly successful families of POWER, PowerPC and Power ISA processors that followed it, measuring in hundreds of different implementations.

The open source GCC compiler removed support for POWER1 (RIOS) and POWER2 (RIOS2) in the 4.5 release.^[1]

Microarchitecture

The POWER1 is a 32-bit two-way superscalar CPU. It contains three major execution units, a fixed-point unit (FXU), a branch unit (BPU) and a floating point unit (FPU). Although the POWER1 is a 32-bit CPU with a 32-bit physical address, its virtual address is 52 bits long. The larger virtual address space was chosen because it was beneficial for the performance of applications, allowing each one to have a large 4 GB address range.

The POWER1 is a big-endian CPU that uses a Harvard style cache hierarchy with separate instruction and data caches. The instruction cache, referred to as the "I-cache" by IBM, is 8 KB in size and is two-way set associative with a line size of 64 bytes. The I-cache is located on the ICU chip. The data cache, referred to as the "D-cache" by IBM, is 32 KB in size for RIOS.9 configurations and 64 KB in size for RIOS-1 configurations. The D-cache is four-way set associative with a line size of 128 bytes. The D-cache employs a store-back scheme, where data that is to be stored is written to the cache instead of the memory in order to reduce the number of writes destined for the memory. The store-back scheme is used to prevent the CPU from monopolizing access to the memory.

Although the POWER1 was a high-end design, it was not capable of multiprocessing, and as such was disadvantaged, as the only way performance could be improved was by clocking the CPU higher, which was difficult to do with such a large multi-chip design. IBM used clustering to overcome this disadvantage in POWER1 systems, allowing them to effectively function as if they were multiprocessing systems, a concept proven by the popularity of SP1 supercomputers based on the POWER1. As the POWER1 was the basis of the POWER2 and P2SC microprocessors, the lack of multiprocessing was passed on to these later POWER processors. Multiprocessing was not supported until the introduction of the POWER3 in 1998.

Physical description

The POWER1 is a multi-chip CPU built from separate chips that are connected to each other by buses. The POWER1 consists of an instruction-cache unit (ICU), a fixed-point unit (FXU), a floating point unit (FPU), a number of data-cache units (DCU), a storage-control unit (SCU) and an I/O unit. Due to its modular design, IBM was able to create two configurations by simply varying the number of DCUs, RIOS-1 and a RIOS.9. The RIOS-1 configuration has four DCUs, the intended amount, and was clocked at up to 40 MHz, whereas the RIOS.9 CPU had two DCUs and was clocked at lower frequencies.

The chips are mounted on the “CPU planar”, a printed circuit board (PCB), using through-hole technology. Due to the large number of chips with wide buses, the PCB has eight planes for routing wires, four for power and ground and four for signals. There are two signal planes on each side of the board, while the four power and ground planes are in the center.

The chips that make up the POWER1 are fabricated in a 1.0 µm CMOS process with three layers of interconnect. The chips are packaged in ceramic pin grid array (CPGA) packages that can have up to 300 pins and dissipate a maximum of 4 W of heat each. The total number of transistors featured by the POWER1, assuming that it is a RIOS-1 configuration, is 6.9 million, with 2.04 million used for logic and 4.86 million used for memory. The die area of all the chips combined is 1,284 mm². The total number of signal pins is 1,464.

Chips

Instruction-cache unit (ICU)

The ICU contains the instruction cache, referred to as the "I-cache" by IBM and the branch processing unit (BPU). The BPU contains the program counter, the condition code register and a loop register. The ICU contains 0.75 million transistors with 0.2 million used for logic and 0.55 million used for SRAM. The ICU die measures approximately 160 mm² (12.7 × 12.7 mm).

The BPU was capable of dispatching multiple instructions to the fixed and floating point instructions queues while it was executing a program flow control instruction (up to four simultaneously and out of order). Speculative branches were also supported by using a prediction bit in the branch instructions, with the results discarded before being saved if the branch was not taken. The alternate instruction would be buffered and discarded if the branch was taken. Consequently, subroutine calls and interrupts are dealt with without incurring branch penalties.

The condition code register has eight field sets, with the first two reserved for fixed and floating point instructions and the seventh for vector instructions. The rest of the fields could be used by other instructions. The loop register is a counter for "decrement and branch on zero" loops with no branch penalty, a feature similar to those found in some DSPs such as the TMS320C30.

Fixed-point unit (FXU)

The FXU is responsible for decoding and executing all fixed-point instructions and floating-point load and store instructions. For execution, the FXU contains the POWER1's fixed-point register file, an arithmetic logic unit (ALU) for general instructions, and a dedicated fixed-point multiply and divide unit. It also contains instruction buffers that receive both fixed- and floating-point instructions from the ICU, passing on the floating-point instructions to the FPU, and a 128-entry two-way set-associative D-TLB for address translation. The FXU contains approximately 0.5 million transistors, with 0.25 million used for logic and 0.25 used for memory, on a die measuring approximately 160 mm².

Floating-point unit (FPU)

The POWER1's floating point unit executes floating-point instructions issue by the ICU. The FPU is pipelined and can execute single precision (32-bit) and double precision (64-bit) instructions. It is capable of performing multiply-add instructions, which contributed to the POWER1's high floating point performance. In most processors, a multiply and an add, which is common in technical and scientific floating-point code, cannot be executed in one cycle, as in the POWER1. Use of fused multiply–add also means that the data is only rounded once, improving the precision of the result slightly.

The floating-point register file is also located on the FPU chip. It contains 32 64-bit floating-point registers, six rename registers and two registers that are used by divide instructions.

Data-cache unit (DCU)

The POWER1 has a 64 KB data cache implemented through four identical data-cache units (DCU), each containing 16 KB of data cache. The cache and the buses that connect the DCU to the other chips are ECC protected. The DCUs also provide the interface to the memory. If two DCUs are present (RIOS.9 configuration), the memory bus is 64 bits wide, and if four DCUs are present (RIOS-1 configuration), the memory bus is 128 bits wide. The memory interface portion of the DCUs provide three features that improves the reliability and availability of the memory: memory scrubbing, ECC and bit steering. Each DCU contains approximately 1.125 million transistors, with 0.175 million used for logic and 0.95 million used for SRAM, on a die measuring approximately 130 mm² (11.3 × 11.3 mm).

Storage-control unit (SCU)

The POWER1 is controlled by the SCU chip. All communications between the ICU, FXU and DCU chips as well as the memory and I/O devices is arbitrated by the SCU. Although the DCUs provide the means to perform memory scrubbing, it is the SCU that controls the process. The SCU contains approximately 0.23 million transistors, all of them for logic, on a die measuring approximately 130 mm².

I/O unit

The POWER1's I/O interfaces are implemented by the I/O unit, which contains an I/O channel controller (IOCC) and two serial link adapters (SLAs). The IOCC implements the Micro Channel interface and controls both I/O and DMA transactions between the Micro Channel adapters and the system memory. The two SLAs each implement a serial fibre optic link, which are intended to connect RS/6000 systems together. The optical links were not supported at the time of the RS/6000's release. The I/O unit contains approximately 0.5 million transistors, with 0.3 million used for logic and 0.2 million used for memory, on a die measuring approximately 160 mm².

Related Research Articles

A central processing unit (CPU), also called a central processor, main processor or just processor, is the electronic circuitry that executes instructions comprising a computer program. The CPU performs basic arithmetic, logic, controlling, and input/output (I/O) operations specified by the instructions in the program. This contrasts with external components such as main memory and I/O circuitry, and specialized processors such as graphics processing units (GPUs).

The Motorola 68040 ("sixty-eight-oh-forty") is a 32-bit microprocessor in the Motorola 68000 series, released in 1990. It is the successor to the 68030 and is followed by the 68060. There was no 68050. In keeping with general Motorola naming, the 68040 is often referred to as simply the '040.

The Pentium microprocessor was introduced by Intel on March 22, 1993, as the first CPU in the Pentium brand. It was instruction set compatible with the 80486 but was a new and very different microarchitecture design. The P5 Pentium was the first superscalar x86 microarchitecture and the world's first superscalar microprocessor to be in mass production. It included dual integer pipelines, a faster floating-point unit, wider data bus, separate code and data caches, and many other techniques and features to enhance performance and support security, encryption, and multiprocessing, for workstations and servers.

The 88000 is a RISC instruction set architecture (ISA) developed by Motorola during the 1980s. The MC88100 arrived on the market in 1988, some two years after the competing SPARC and MIPS. Due to the late start and extensive delays releasing the second-generation MC88110, the m88k achieved very limited success outside of the MVME platform and embedded controller environments. When Motorola joined the AIM alliance in 1991 to develop the PowerPC, further development of the 88000 ended.

The Pentium Pro is a sixth-generation x86 microprocessor developed and manufactured by Intel and introduced on November 1, 1995. It introduced the P6 microarchitecture and was originally intended to replace the original Pentium in a full range of applications. While the Pentium and Pentium MMX had 3.1 and 4.5 million transistors, respectively, the Pentium Pro contained 5.5 million transistors. Later, it was reduced to a more narrow role as a server and high-end desktop processor and was used in supercomputers like ASCI Red, the first computer to reach the trillion floating point operations per second (teraFLOPS) performance mark. The Pentium Pro was capable of both dual- and quad-processor configurations. It only came in one form factor, the relatively large rectangular Socket 8. The Pentium Pro was succeeded by the Pentium II Xeon in 1998.

The PowerPC 7xx is a family of third generation 32-bit PowerPC microprocessors designed and manufactured by IBM and Motorola. This family is called the PowerPC G3 by its well-known customer Apple Inc., which introduced it on November 10, 1997. The term "PowerPC G3" is often, and incorrectly, imagined to be a microprocessor when in fact a number of microprocessors from different vendors have been used. Such designations were applied to Macintosh computers such as the PowerBook G3, the multicolored iMacs, iBooks and several desktops, including both the Beige and Blue and White Power Macintosh G3s. The low power requirements and small size made the processors ideal for laptops and the name lived out its last days at Apple in the iBook.

PowerPC G4 is a designation formerly used by Apple and Eyetech to describe a fourth generation of 32-bit PowerPC microprocessors. Apple has applied this name to various processor models from Freescale, a former part of Motorola. Motorola and Freescale's proper name of this family of processors is PowerPC 74xx.

SPARC64 is a microprocessor developed by HAL Computer Systems and fabricated by Fujitsu. It implements the SPARC V9 instruction set architecture (ISA), the first microprocessor to do so. SPARC64 was HAL's first microprocessor and was the first in the SPARC64 brand. It operates at 101 and 118 MHz. The SPARC64 was used exclusively by Fujitsu in their systems; the first systems, the Fujitsu HALstation Model 330 and Model 350 workstations, were formally announced in September 1995 and were introduced in October 1995, two years late. It was succeeded by the SPARC64 II in 1996.

The RISC Single Chip, or RSC, is a single-chip microprocessor developed and fabricated by International Business Machines (IBM). The RSC was a feature-reduced single-chip implementation of the POWER1, a multi-chip central processing unit (CPU) which implemented the POWER instruction set architecture (ISA). It was used in entry-level workstation models of the IBM RS/6000 family, such as the Model 220 and 230.

POWER3 1998 family of microprocessors by IBM

The POWER3 is a microprocessor, designed and exclusively manufactured by IBM, that implemented the 64-bit version of the PowerPC instruction set architecture (ISA), including all of the optional instructions of the ISA such as instructions present in the POWER2 version of the POWER ISA but not in the PowerPC ISA. It was introduced on 5 October 1998, debuting in the RS/6000 43P Model 260, a high-end graphics workstation. The POWER3 was originally supposed to be called the PowerPC 630 but was renamed, probably to differentiate the server-oriented POWER processors it replaced from the more consumer-oriented 32-bit PowerPCs. The POWER3 was the successor of the P2SC derivative of the POWER2 and completed IBM's long-delayed transition from POWER to PowerPC, which was originally scheduled to conclude in 1995. The POWER3 was used in IBM RS/6000 servers and workstations at 200 MHz. It competed with the Digital Equipment Corporation (DEC) Alpha 21264 and the Hewlett-Packard (HP) PA-8500.

Broadway (microprocessor) 32-bit CPU for the Wii

Broadway is the codename of the 32-bit central processing unit (CPU) used in Nintendo's Wii home video game console. It was designed by IBM, and was initially produced using a 90 nm SOI process and later produced with a 65 nm SOI process.

The R4000 is a microprocessor developed by MIPS Computer Systems that implements the MIPS III instruction set architecture (ISA). Officially announced on 1 October 1991, it was one of the first 64-bit microprocessors and the first MIPS III implementation. In the early 1990s, when RISC microprocessors were expected to replace CISC microprocessors such as the Intel i486, the R4000 was selected to be the microprocessor of the Advanced Computing Environment (ACE), an industry standard that intended to define a common RISC platform. ACE ultimately failed for a number of reasons, but the R4000 found success in the workstation and server markets.

The POWER2, originally named RIOS2, is a processor designed by IBM that implemented the POWER instruction set architecture. The POWER2 was the successor of the POWER1, debuting in September 1993 within IBM's RS/6000 systems. When introduced, the POWER2 was the fastest microprocessor, surpassing the Alpha 21064. When the Alpha 21064A was introduced in 1993, the POWER2 lost the lead and became second. IBM claimed that the performance for a 62.5 MHz POWER2 was 73.3 SPECint92 and 134.6 SPECfp92.

The PowerPC 600 family was the first family of PowerPC processors built. They were designed at the Somerset facility in Austin, Texas, jointly funded and staffed by engineers from IBM and Motorola as a part of the AIM alliance. Somerset was opened in 1992 and its goal was to make the first PowerPC processor and then keep designing general purpose PowerPC processors for personal computers. The first incarnation became the PowerPC 601 in 1993, and the second generation soon followed with the PowerPC 603, PowerPC 604 and the 64-bit PowerPC 620.

Gekko (microprocessor) CPU for the GameCube

Gekko is a superscalar out-of-order 32-bit PowerPC microprocessor custom-made by IBM in 2000 for Nintendo to use as the CPU in their sixth generation game console, the GameCube, and later the Triforce Arcade Board.

The PA-8000 (PCX-U), code-named Onyx, is a microprocessor developed and fabricated by Hewlett-Packard (HP) that implemented the PA-RISC 2.0 instruction set architecture (ISA). It was a completely new design with no circuitry derived from previous PA-RISC microprocessors. The PA-8000 was introduced on 2 November 1995 when shipments began to members of the Precision RISC Organization (PRO). It was used exclusively by PRO members and was not sold on the merchant market. All follow-on PA-8x00 processors are based on the basic PA-8000 processor core.

The IBM A2 is an open source massively multicore capable and multithreaded 64-bit Power ISA processor core designed by IBM using the Power ISA v.2.06 specification. Versions of processors based on the A2 core range from a 2.3 GHz version with 16 cores consuming 65 W to a less powerful, four core version, consuming 20 W at 1.4 GHz.

The IBM POWER ISA is a reduced instruction set computer (RISC) instruction set architecture (ISA) developed by IBM. The name is an acronym for Performance Optimization With Enhanced RISC.

IBM has a series of high performance microprocessors called POWER followed by a number designating generation, i.e. POWER1, POWER2, POWER3 and so forth up to the latest Power10. These processors have been used by IBM in their RS/6000, AS/400, pSeries, iSeries, System p, System i and Power Systems line of servers and supercomputers. They have also been used in data storage devices by IBM and by other server manufacturers like Bull and Hitachi.

Since 1985, many processors implementing some version of the MIPS architecture have been designed and used widely.

References

↑ "GCC 4.5 Release Series — Changes, New Features, and Fixes - GNU Project - Free Software Foundation (FSF)". gcc.gnu.org.

Great Microprocessors of the Past and Present (V 13.4.0)
Montoye, R. K.; Hokenek, E.; Runyon, S. L. (January 1990). "Design of the IBM RISC System/6000 floating-point execution unit". IBM Journal of Research and Development. 34 (1): 59–70. doi:10.1147/rd.341.0059.
Oehler, R. R.; Groves, R. D. (January 1990). "IBM RISC System/6000 processor architecture". IBM Journal of Research and Development. 34 (1): 23–36. doi:10.1147/rd.341.0023.
Grohoski, G. F. (January 1990). "Machine organization of the IBM RISC System/6000 processor". IBM Journal of Research and Development. 34 (1): 37–58. doi:10.1147/rd.341.0037.
Bakoglu, H. B.; Grohoski, G. F.; Montoye, R. K. (January 1990). "The IBM RISC System/6000 processor: Hardware overview". IBM Journal of Research and Development. 34 (1): 12–22. doi:10.1147/rd.341.0012.