| ITS-8 | |
|---|---|
 | |
| Role | Motor-glider |
| National origin | Poland |
| Manufacturer | Institute of gliding techniques (I.T.S.), University of Lwów |
| Designer | Wieslaw Stępniewski |
| First flight | late August 1936 |
| Number built | 2 |
The ITS-8 was a Polish twin-boom motor glider flown in 1936. Two prototypes were completed but production was prevented by the German invasion of Poland in 1939.
In the mid-1930s there was growing Polish interest in low cost powered gliders and other small, low powered, structurally simple aircraft. The Institute of Gliding Techniques at Lwów University studied motor gliders, guided by FAI specifications for the new International Powered Glider Class. They concluded that a conventional glider nose and forward fuselage was required, hence a pusher engine and, to avoid the drag of a pylon engine mounting, a twin-boom layout. The ITS-8, designed to have a gliding performance competitive with contemporary intermediate and high performance unpowered machines, followed these specifications. Its construction was funded by the LOPP [1]
The wooden ITS-8 had a high wing which was built around a single box spar which with a plywood-covered leading edge formed a torsion box. An auxiliary spar carried differential ailerons. In plan the outer wings had swept leading edges and unswept trailing edges. The rectangular centre section, which was braced on each side with a pair of parallel steel tube struts from the lower fuselage, was ply-covered overall but the outer wing panels were fabric covered behind the torsion box. Two versions of the aircraft had been planned from the start: the low-powered ITS-8, with a 13.6 m (44 ft 7 in) span and an aspect ratio of 10.1 and the higher-powered ITS-8W with longer outer panels, giving it a 14.2 m (46 ft 7 in) span and an aspect ratio of 12.5. The ITS-8W also had a centre section with a higher speed aerofoil, though both used the same aerofoil for their outer panels. These differences reflected the initial intention to use the ITS-8 as a trainer and the ITS-8W in competitive events. [1] [2]
The ITS-8's pilot sat under the wing leading edge in an enclosed cockpit within a drop-shaped, ply-skinned nacelle, its pointed end just aft of the trailing edge. A thin, faired structure connected the nacelle to the centre of the wing, bracing it and the engine, largely buried in the wing apart from a carefully faired air intake at mid-chord and cylinder heads exposed for cooling. The ITS-8 had a 13 kW (18 hp) Kroeber M3 Köller flat twin engine and the ITS-8W initially used another flat-twin, the 17–27 kW (23–36 hp) Schliha as a stop-gap, later replaced by the intended 22–24 kW (30–32 hp) Sarolea Albatros flat-twin. The empennage was mounted on twin rectangular section spruce box girder booms which were internally wire-braced. A tapered tailplane with rounded tips was positioned on the top of the beams. The ITS-8 had a narrow fin mounted centrally on the tailplane, carrying a large balanced rudder but on the ITS-8W this was replaced with twin fins and rudders on the booms. [1] [2]
The nacelle had a sprung landing skid, a semi-retractable monowheel under the wing and a long leaf spring tailwheel. On the ITS-8W the latter was faired-in and ended with a tailwheel. [1] [2]
The ITS-8 was first flown as a glider, towed by a car and piloted by Wieslaw Stępniewski, in late August 1936. Powered flights, piloted by Zbigniew Zabski, began in October and revealed engine vibrations severe enough to damage its mountings. The problem was solved with new mountings on rubber dampers. For a while a 25–28 hp (19–21 kW) Ava 4, an air-cooled flat four engine, was trialed but rejected as unreliable. The test flight programme included soaring flights and airborne engine restarts. [1]
Construction of the ITS-8W began at the same time as that of the ITS-8. It was originally intended to be identical to it apart from the more powerful engine and its use of the longer, interchangeable, outer wing panels. The delay caused by the engine vibration problems of the ITS-8 provided an opportunity to incorporate the aerodynamic advantages provided by the revised centre section and twin-finned empennage before the first flight on 18 May 1938. Planned preparation for production of the ITS-8W in 1939 was ended by the German invasion of Poland. [1]
The invasion also prevented the completion of the ITS-8M, powered by a 35 hp (26 kW) Sarolea, which was to have had a fully cantilever wing fitted with flaps and a fully retractable, twin wheel undercarriage. It was intended for meteorological research. [1]
According to Cynk, the designation ITS-8R referred to a proposed record breaking version which did not reach the detailed design stage. However, the same designation has been associated with a rocket-assisted version and the ITS-8 was certainly cited in proposals as a candidate for rocket-assisted take-offs. Cynk states that no rocket-propelled variant was built but another suggests that it was; both are agreed that there is no evidence of flight tests. [1] [3]
Data from J. Cynk (1971) [1]
General characteristics
Performance
The Nikol A-2 was a small, amphibious aircraft designed and built in Poland in the 1930s. Only one was completed before World War II.
The RAE Zephyr was a single-seat, single-engined light pusher configuration biplane designed and built by the Aero Club of the Royal Aircraft Establishment (RAE) for the 1923 Lympne Motor Glider Competition. At a late stage the Aero Club chose to enter the more promising RAE Hurricane instead, using the Zephyr's engine, and the Zephyr itself was abandoned.
The Bąk (Horse-Fly) was a single seat motor glider designed and built in Poland from 1936.
The SAIMAN LB.2 was an unconventional Italian two seat cabin side by side sport aircraft designed around 1937, with a single pusher configuration engine, twin tail booms and an early tricycle undercarriage.
The Bonomi BS.19 Alca was a single seat, tractor configuration motor glider, designed and built in Italy shortly before World War II. It had an unusual retractable undercarriage used only for take-offs. Only one was built.
The Bonomi BS.22 Alzavola was a training motor glider, intended to acquaint capable glider pilots with the characteristics of powered aircraft. The sole example was designed and built in Italy in the late 1930s.
The Kortenbach & Rauh Kora 1 was an unusual twin boom, pusher configuration motor glider, designed and built in Germany in the 1970s and intended as a training aircraft.
The Payen Arbalète was a small, pusher configuration, experimental French tailless aircraft, designed by Nicolas Roland Payen, and first flown in 1965.
The Caudron Type F was a French single seat biplane produced just before World War I. A dozen were bought by China and at least two other examples, with different engines, competed in 1913, coming first and second in the biplane category of the cross-country race at Reims. Flown by Pierre Chanteloup, one was the first biplane to loop-the-loop.
The Avia 60-MP was a French motor glider with a wing based on that of the Avia 32-E, an advanced training glider. It was intended as both an advanced trainer and as an atmospheric research aircraft.
The Lioré et Olivier LeO H-23 was a French military flying boat, primarily intended for coastal reconnaissance, though able to carry a small bomb load. Only one was built.
The Silesia S-3 was the first design from the Polish Sopora brothers to fly. It was a low power, single seat, high wing light aircraft. Only one was built and its flying time was limited.
The WT-1 was a 1931 high performance sports aircraft designed in Poland. It only made two flights.
The Nowotny N-y 4bis was a tandem two-seat light aircraft, built in Poland, as a step towards a very light, low-powered training aircraft for flying clubs. Its designer was killed in a glider soon after the first flight of his trainer and its development was abandoned.
The AMA, named after its designers, was a one-off motor glider built in Poland in the mid-1930s. Its development was abandoned after early tests revealed incurable engine-mounting vibration problems.
The MIP Smyk, MIP from the initials of its Polish designers with Smyk meaning Brat or Kid, was an aerodynamically refined motor glider designed and built at Warsaw Technical University from 1935.
The Ścibor-Rylski ŚR-3 was a Polish, ultralight, low power, single-seat sports aircraft. First flown in August 1939, only one was completed before World War II.
The Czerwiński CW 8 was a mid-1930s Polish open-frame basic training glider. Its design was advanced and its price low, but its stalling characteristics were too dangerous for beginners, so the thirty-plus examples completed were rapidly withdrawn from use. Two were subsequently modified, one with greater span and the other with a small engine.
The RRG Delta I was a German experimental tailless aircraft flown in the early 1930s first as a glider and then powered. It was one of the first delta wing aircraft.
The Campbell Model F, a pusher configuration, two seat sport aircraft built in the 1930s, was unconventional in its day with its empennage on twin, slim booms, a cockpit under stepless, rounded, multi-panel glazing and a tricycle undercarriage.