The Iambic trimeter, in classical Greek and Latin poetry, is a meter of poetry consisting of three iambic metra (each of two feet) per line. In English poetry, it refers to a meter with three iambic feet.
In ancient Greek poetry and Latin poetry, an iambic trimeter is a quantitative meter, in which a line consists of three iambic metra. Each metron consists of the pattern | x – u – |, where "–" represents a long syllable, "u" a short one, and "x" an anceps (either long or short). Resolution was common, especially in the first two metra of the line, so that any long or anceps syllable except the last could be replaced by two short syllables (see for example Euripides#Chronology), making a total of 13 or more syllables. It is the most common meter used for the spoken parts (as opposed to the sung parts) of Ancient Greek tragedy, comedy, and satyr plays. It is also common in iambus or 'blame poetry', although it is not the only meter for that genre. [1]
In Latin, the iambic trimeter was adapted for the spoken parts of Roman plays, especially Roman comedy. The form used in Roman comedy is usually known as the iambic senarius. The iambic trimeter was also used in the Epodes of Horace, the fables of Phaedrus, the proverbs of Publilius Syrus, and the tragedies of Seneca the Younger.
In the accentual-syllabic verse of English, German, and other languages, however, the iambic trimeter is a meter consisting of three iambs (disyllabic units with stress on the second syllable) per line, making a line of six syllables.
The iambic trimeter derives its name from its essential shape, which is three metrical units (hence "trimeter") which are each basically iambic in form. The iambic metron has the following shape (where "x" is an anceps, which may be either long or short, "–" is a long syllable, and "u" is a short one):
The trimeter repeats this structure three times, with the resulting shape as follows:
As always, the last syllable of a verse is counted as long even if naturally short (brevis in longo).
An example of the structure:
A caesura (break between words) is usually found after the fifth or seventh element of the line. In the example above, it is found after the fifth element, as so (with¦representing the caesura):
Finally, Porson's Law is observed, which means here that if the anceps of the third metron is long, there cannot be a word-break after that anceps. The second anceps is free from this constraint, because a word-break at that point would be a main caesura.
The Greek iambic trimeter allows resolution, allowing more variety. In tragedy, resolving the anceps elements is rare, except to accommodate a proper name, but resolution of the long elements is slightly more common. In comedy, which is closer to casual speech, resolution is fairly common.
In both tragedy and comedy, though, the third metron is usually left alone; resolution in the final metron of the line is rare.
In tragedy, resolutions are virtually never consecutive, and two instances in the same line are rare.
When resolution occurs, the resulting two shorts are almost always within the same word-unit.
The iambic trimeter was imitated in Latin by 2nd century BC comic playwrights such as Plautus and Terence, where it is known as the iambic senarius. It is the most commonly used meter in their plays, especially in Terence, and it is the only meter which was used purely for dialogue without musical accompaniment. It was the preferred meter of the Roman fabulist Phaedrus in the first century AD. In Latin the basic meter was as follows:
That is to say, the third and seventh elements, which were always short in Greek, were anceps (either long or short) in Latin; in fact they are long 60% of the time, while the Greek anceps syllables (the first, fifth, and ninth elements) are long in 80–90% of lines. [2] As in the Greek trimeter, any long or anceps syllable except the last could be replaced with a double short syllable (u u). As in Greek, there was usually (though not always) a caesura (word-break) after the fifth element.
An example of a Latin iambic senarius (from the prologue to Plautus' Aulularia) is the following:
A difference between Latin and Greek iambics was that the Latin senarius was partly accentual, that is to say the words were arranged in such a way that very often (especially in the first half of the verse), the word accents coincided with the strong points of the line, that is the 2nd, 4th, 6th etc. elements of the verse. Thus even in lines where nearly all the syllables were long as in the above verse, it is possible to feel the iambic rhythm of the line.
Any long or anceps element except the last could be resolved into two short syllables, giving rise to lines like the following (the resolved elements are underlined):
The above line also illustrates another feature found in Plautus and Terence, namely iambic shortening or brevis breviāns, where the syllables ab ex- are scanned as two short syllables.
In English and similar accentual-syllabic metrical systems, a line of iambic trimeter consists of three iambic feet. The resulting six-syllable line is very short, and few poems are written entirely in this meter.
The 1948 poem "My Papa's Waltz" by Theodore Roethke uses the trimeter:
William Blake's "Song ('I Love the Jocund Dance')" (1783) uses a loose iambic trimeter that sometimes incorporates additional weak syllables:
The English iambic trimeter is much more frequently encountered as one-half of the common meter, which consists of alternating iambic tetrameter and trimeter lines:
Another example, from the American poet Emily Dickinson:
In languages with quantitative poetic metres, such as Ancient Greek, Latin, Arabic, Sanskrit, and classical Persian, an anceps is a position in a metrical pattern which can be filled by either a long or a short syllable.
An iamb or iambus is a metrical foot used in various types of poetry. Originally the term referred to one of the feet of the quantitative meter of classical Greek prosody: a short syllable followed by a long syllable. This terminology was adopted in the description of accentual-syllabic verse in English, where it refers to a foot comprising an unstressed syllable followed by a stressed syllable. Thus a Latin word like íbī, because of its short-long rhythm, is considered by Latin scholars to be an iamb, but because it has a stress on the first syllable, in modern linguistics it is considered to be a trochee.
The foot is the basic repeating rhythmic unit that forms part of a line of verse in most Indo-European traditions of poetry, including English accentual-syllabic verse and the quantitative meter of classical ancient Greek and Latin poetry. The unit is composed of syllables, and is usually two, three, or four syllables in length. The most common feet in English are the iamb, trochee, dactyl, and anapaest. The foot might be compared to a bar, or a beat divided into pulse groups, in musical notation.
Choliambic verse, also known as limping iambs or scazons or halting iambic, is a form of meter in poetry. It is found in both Greek and Latin poetry in the classical period. Choliambic verse is sometimes called scazon, or "lame iambic", because it brings the reader down on the wrong "foot" by reversing the stresses of the last few beats. It was originally pioneered by the Greek lyric poet Hipponax, who wrote "lame trochaics" as well as "lame iambics".
A catalectic line is a metrically incomplete line of verse, lacking a syllable at the end or ending with an incomplete foot. One form of catalexis is headlessness, where the unstressed syllable is dropped from the beginning of the line.
Glyconic is a form of meter in classical Greek and Latin poetry. The glyconic line is the most basic and most commonly used form of Aeolic verse, and it is often combined with others.
Iambic tetrameter is a poetic meter in ancient Greek and Latin poetry; as the name of a rhythm, iambic tetrameter consists of four metra, each metron being of the form | x – u – |, consisting of a spondee and an iamb, or two iambs. There usually is a break in the centre of the line, thus the whole line is:
| x – u – | x – u – || x – u – || x – u – |
Archilochian or archilochean is a term used to describe several metres of Ancient Greek and Latin poetry. The name is derived from Archilochus, whose poetry first uses the rhythms.
Porson's Law, or Porson's Bridge, is a metrical law that applies to iambic trimeter, the main spoken metre of Greek tragedy. It does not apply to iambic trimeter in Greek comedy. It was formulated by Richard Porson in his critical edition of Euripides' Hecuba in 1802.
Resolution is the metrical phenomenon in poetry of replacing a normally long syllable in the meter with two short syllables. It is often found in iambic and trochaic meters, and also in anapestic, dochmiac and sometimes in cretic, bacchiac, and ionic meters. In iambic and trochaic meters, either the first or the second half of the metrical foot can be resolved, or sometimes both.
Greek and Latin metre is an overall term used for the various rhythms in which Greek and Latin poems were composed. The individual rhythmical patterns used in Greek and Latin poetry are also known as "metres".
In ancient Greek and Latin literature, the trochaic septenarius is a form of ancient poetic metre first used in 7th century BC Greek literature. It was one of the two most common metres of Roman comedy of the early 1st century BC and was also used for the marching songs sung by soldiers at Caesar's victory parade. After a period when it was little used, it is found again in the Pervigilium Veneris, and taken up again as a metre for Christian hymns. The same metre, with stress-rhythm replacing quantitative metre, has continued to be used, especially for hymns and anthems, right up to the present day.
The ionic is a four-syllable metrical unit (metron) of light-light-heavy-heavy that occurs in ancient Greek and Latin poetry. According to Hephaestion it was known as the Ionicos because it was used by the Ionians of Asia Minor; and it was also known as the Persicos and was associated with Persian poetry. Like the choriamb, in Greek quantitative verse the ionic never appears in passages meant to be spoken rather than sung. "Ionics" may refer inclusively to poetry composed of the various metrical units of the same total quantitative length that may be used in combination with ionics proper: ionics, choriambs, and anaclasis. Equivalent forms exist in English poetry and in classical Persian poetry.
Latin prosody is the study of Latin poetry and its laws of meter. The following article provides an overview of those laws as practised by Latin poets in the late Roman Republic and early Roman Empire, with verses by Catullus, Horace, Virgil and Ovid as models. Except for the early Saturnian poetry, which may have been accentual, Latin poets borrowed all their verse forms from the Greeks, despite significant differences between the two languages.
Prosody is the theory and practice of versification.
Roman comedy is mainly represented by two playwrights, Plautus and Terence. The works of other Latin playwrights such as Livius Andronicus, Naevius, Ennius, and Caecilius Statius are now lost except for a few lines quoted in other authors. 20 plays of Plautus survive complete, and 6 of Terence.
Brevis brevians, also known as iambic shortening or correptio iambica, is a metrical feature of early Latin verse, especially Plautus and Terence, in which a pair of syllables which are theoretically short + long can be scanned as a pair of short syllables. The plural is breves breviantes.
Anaclasis is a feature of poetic metre, in which a long and a short syllable exchange places in a metrical pattern.
A metron, , plural metra, is a repeating section, 3 to 6 syllables long, of a poetic metre. The word is particularly used in reference to ancient Greek. According to a definition by Paul Maas, usually a metron consists of two long elements and up to two other elements which can be short, anceps or biceps.
The sotadean metre was a rhythmic pattern used by and named after the 3rd-century BC Greek poet Sotades. It is generally classified as a type of ionic metre, though in fact it is half ionic and half trochaic. It has several variations, but the usual pattern is this: