Kantrowitz limit

Last updated

In gas dynamics, the Kantrowitz limit refers to a theoretical concept describing choked flow at supersonic or near-supersonic velocities. [1] When an initially subsonic fluid flow experiences a reduction in cross-section area, the flow speeds up in order to maintain the same mass-flow rate, per the continuity equation. If a near supersonic flow experiences an area contraction, the velocity of the flow will decrease until it reaches the local speed of sound, and the flow will be choked. This is the principle behind the Kantrowitz limit: it is the maximum amount of contraction a flow can experience before the flow chokes, and the flow speed can no longer be increased above this limit, independent of changes in upstream or downstream pressure.

Contents

Derivation of Kantrowitz limit

Assume a fluid enters an internally contracting nozzle at cross-section 0, and passes through a throat of smaller area at cross-section 4. A normal shock is assumed to start at the beginning of the nozzle contraction, and this point in the nozzle is referred to as cross-section 2. Due to conservation of mass within the nozzle, the mass flow rate at each cross section must be equal:

For an ideal compressible gas, the mass flow rate at each cross-section can be written as, [2]

where is the cross-section area at the specified point, is the Isentropic expansion factor of the gas, is the Mach number of the flow at the specified cross-section, is the ideal gas constant, is the stagnation pressure, and is the stagnation temperature.

Setting the mass flow rates equal at the inlet and throat, and recognizing that the total temperature, ratio of specific heats, and gas constant are constant, the conservation of mass simplifies to,

Solving for A4/A0,

Three assumptions will be made: the flow from behind the normal shock in the inlet is isentropic, or pt4 = pt2 , the flow at the throat (point 4) is sonic such that M4 = 1, and the pressures between the various point are related through normal shock relations, resulting in the following relation between inlet and throat pressures, [1]

And since M4 = 1, shock relations at the throat simplify to, [2]

Substituting for and in the area ratio expression gives,

This can also be written as, [3]

Applications

The Kantrowitz limit has many applications in gas dynamics of inlet flow, including jet engines and rockets operating at high-subsonic and supersonic velocities, and high-speed transportation systems such as the Hyperloop.

Hypersonic Engine Inlets

The Kantrowitz limit demonstrates the amount of contraction, or change in two-dimensional cross-section area, that a hypersonic inlet can employ while successfully starting an engine inlet (or avoiding the expelling of the hypersonic inlet shock wave). [4]

Hyperloop

The Kantrowitz limit is a fundamental concept in the Hyperloop, a proposed high-speed transportation system. The Hyperloop moves passengers in sealed pods through a partial-vacuum tube at high-subsonic speeds. As the air in the tube moves into and around the smaller cross-sectional area between the pod and tube, the air flow must speed up due to the continuity principle. If the pod is travelling through the tube fast enough, the air flow around the pod will reach the speed of sound, and the flow will become choked, resulting in large air resistance on the pod. The condition that determines if the flow around the pod chokes is the Kantrowitz limit. The Kantrowitz limit therefore acts a "speed limit" - for a given ratio of tube area and pod area, there is a maximum speed that the pod can travel before flow around the pod chokes and air resistance sharply increases. [5]

In order to break through the speed limit set by the Kantrowitz limit, there are two possible approaches. The first would increase the diameter of the tube in order to provide more bypass area for the air around the pod, preventing the flow from choking. This solution is not very practical in practice however, as the tube would have to be built very large, and logistical costs of such a large tube are impractical.

As an alternative, it has been found during the main study of the Swissmetro project (1993 -1998) that a turbine can be installed on board of the vehicle to push the displaced air across the vehicle body (TurboSwissMetro) [6] [7] and hence to reduce far field impacts. This would avoid the continuous increase of the vehicle drag due to the choking of the flow at the cost of the power required to drive the turbine and hence enable larger speeds. The computer program NUMSTA has been developed in this context; it allows to simulate the dynamical interaction of several high speed vehicles in complex tunnel networks including the choking effect.

This idea has also been proposed by Elon Musk in his 2013 Hyperloop Alpha paper where a compressor is placed at the front of the pod. [5] The compressor actively draws in air from the front of the pod and transfers it to the rear, bypassing the gap between pod and tube while diverting a fraction of the flow to power a low-friction air-bearing suspension system. [5] The inclusion of a compressor in the Hyperloop pod circumvents the Kantrowitz limit, allowing the pod to travel at speeds over 700 mph (about 1126 km/h) in a relatively narrow tube.

For a pod travelling through a tube, the Kantrowitz limit is given as the ratio of tube area to bypass area both around the outside of the pod and through any air-bypass compressor: [8]

where: 
= cross-sectional area of bypass region between tube and pod, as well as air bypass provide by a compressor on board the pod
= cross-sectional area of tube
= Mach number of flow
= = isentropic expansion factor
( and are specific heats of the gas at constant pressure and constant volume respectively),

Related Research Articles

<span class="mw-page-title-main">Kinetic energy</span> Energy of a moving physical body

In physics, the kinetic energy of an object is the form of energy that it possesses due to its motion.

<span class="mw-page-title-main">Mach number</span> Ratio of speed of an object moving through fluid and local speed of sound

The Mach number, often only Mach, is a dimensionless quantity in fluid dynamics representing the ratio of flow velocity past a boundary to the local speed of sound. It is named after the Austrian physicist and philosopher Ernst Mach.

<span class="mw-page-title-main">Navier–Stokes equations</span> Equations describing the motion of viscous fluid substances

The Navier–Stokes equations are partial differential equations which describe the motion of viscous fluid substances. They were named after French engineer and physicist Claude-Louis Navier and the Irish physicist and mathematician George Gabriel Stokes. They were developed over several decades of progressively building the theories, from 1822 (Navier) to 1842–1850 (Stokes).

Compressible flow is the branch of fluid mechanics that deals with flows having significant changes in fluid density. While all flows are compressible, flows are usually treated as being incompressible when the Mach number is smaller than 0.3. The study of compressible flow is relevant to high-speed aircraft, jet engines, rocket motors, high-speed entry into a planetary atmosphere, gas pipelines, commercial applications such as abrasive blasting, and many other fields.

<span class="mw-page-title-main">Centrifugal compressor</span> Sub-class of dynamic axisymmetric work-absorbing turbomachinery

Centrifugal compressors, sometimes called impeller compressors or radial compressors, are a sub-class of dynamic axisymmetric work-absorbing turbomachinery.

<span class="mw-page-title-main">Rankine–Hugoniot conditions</span> Concept in physics

The Rankine–Hugoniot conditions, also referred to as Rankine–Hugoniot jump conditions or Rankine–Hugoniot relations, describe the relationship between the states on both sides of a shock wave or a combustion wave in a one-dimensional flow in fluids or a one-dimensional deformation in solids. They are named in recognition of the work carried out by Scottish engineer and physicist William John Macquorn Rankine and French engineer Pierre Henri Hugoniot.

Arthur Robert Kantrowitz was an American scientist, engineer, and educator.

de Laval nozzle Pinched tube generating supersonic flow

A de Laval nozzle is a tube which is pinched in the middle, making a carefully balanced, asymmetric hourglass shape. It is used to accelerate a compressible fluid to supersonic speeds in the axial (thrust) direction, by converting the thermal energy of the flow into kinetic energy. De Laval nozzles are widely used in some types of steam turbines and rocket engine nozzles. It also sees use in supersonic jet engines.

The Lorentz factor or Lorentz term is a quantity expressing how much the measurements of time, length, and other physical properties change for an object while it moves. The expression appears in several equations in special relativity, and it arises in derivations of the Lorentz transformations. The name originates from its earlier appearance in Lorentzian electrodynamics – named after the Dutch physicist Hendrik Lorentz.

In fluid dynamics, the pressure coefficient is a dimensionless number which describes the relative pressures throughout a flow field. The pressure coefficient is used in aerodynamics and hydrodynamics. Every point in a fluid flow field has its own unique pressure coefficient, Cp.

<span class="mw-page-title-main">Oblique shock</span> Shock wave that is inclined with respect to the incident upstream flow direction

An oblique shock wave is a shock wave that, unlike a normal shock, is inclined with respect to the direction of incoming air. It occurs when a supersonic flow encounters a corner that effectively turns the flow into itself and compresses. The upstream streamlines are uniformly deflected after the shock wave. The most common way to produce an oblique shock wave is to place a wedge into supersonic, compressible flow. Similar to a normal shock wave, the oblique shock wave consists of a very thin region across which nearly discontinuous changes in the thermodynamic properties of a gas occur. While the upstream and downstream flow directions are unchanged across a normal shock, they are different for flow across an oblique shock wave.

In fluid dynamics, Rayleigh flow refers to frictionless, non-adiabatic fluid flow through a constant-area duct where the effect of heat transfer is considered. Compressibility effects often come into consideration, although the Rayleigh flow model certainly also applies to incompressible flow. For this model, the duct area remains constant and no mass is added within the duct. Therefore, unlike Fanno flow, the stagnation temperature is a variable. The heat addition causes a decrease in stagnation pressure, which is known as the Rayleigh effect and is critical in the design of combustion systems. Heat addition will cause both supersonic and subsonic Mach numbers to approach Mach 1, resulting in choked flow. Conversely, heat rejection decreases a subsonic Mach number and increases a supersonic Mach number along the duct. It can be shown that for calorically perfect flows the maximum entropy occurs at M = 1.

Choked flow is a compressible flow effect. The parameter that becomes "choked" or "limited" is the fluid velocity.

Subsonic wind tunnels are used for operations at low Mach numbers, with speeds in the test section up to 480 km/h. They may be of open-return type or closed-return flow. These tunnels use large axial fans to move air and increase dynamic pressure, overcoming viscous losses. The design principles of subsonic wind tunnels are based on the continuity equation and Bernoulli's principle, which allow for the calculation of important parameters such as the tunnel's contraction ratio.

<span class="mw-page-title-main">Chapman–Jouguet condition</span>

The Chapman–Jouguet condition holds approximately in detonation waves in high explosives. It states that the detonation propagates at a velocity at which the reacting gases just reach sonic velocity as the reaction ceases.

<span class="mw-page-title-main">Prandtl–Meyer expansion fan</span> Phenomenon in fluid dynamics

A supersonic expansion fan, technically known as Prandtl–Meyer expansion fan, a two-dimensional simple wave, is a centered expansion process that occurs when a supersonic flow turns around a convex corner. The fan consists of an infinite number of Mach waves, diverging from a sharp corner. When a flow turns around a smooth and circular corner, these waves can be extended backwards to meet at a point.

In fluid dynamics, Fanno flow is the adiabatic flow through a constant area duct where the effect of friction is considered. Compressibility effects often come into consideration, although the Fanno flow model certainly also applies to incompressible flow. For this model, the duct area remains constant, the flow is assumed to be steady and one-dimensional, and no mass is added within the duct. The Fanno flow model is considered an irreversible process due to viscous effects. The viscous friction causes the flow properties to change along the duct. The frictional effect is modeled as a shear stress at the wall acting on the fluid with uniform properties over any cross section of the duct.

In fluid dynamics, aerodynamic potential flow codes or panel codes are used to determine the fluid velocity, and subsequently the pressure distribution, on an object. This may be a simple two-dimensional object, such as a circle or wing, or it may be a three-dimensional vehicle.

In physics, the Maxwell–Jüttner distribution, sometimes called Jüttner–Synge distribution, is the distribution of speeds of particles in a hypothetical gas of relativistic particles. Similar to the Maxwell–Boltzmann distribution, the Maxwell–Jüttner distribution considers a classical ideal gas where the particles are dilute and do not significantly interact with each other. The distinction from Maxwell–Boltzmann's case is that effects of special relativity are taken into account. In the limit of low temperatures much less than , this distribution becomes identical to the Maxwell–Boltzmann distribution.

In fluid mechanics, isentropic nozzle flow describes the movement of a fluid through a narrow opening without an increase in entropy.

References

  1. 1 2 Kantrowitz, Arthur; duP, Coleman (May 1945). "Preliminary Investigation of Supersonic Diffusers" (PDF). Advance Confidential Report L5D20. Archived (PDF) from the original on October 20, 2016.
  2. 1 2 "Compressible Mass Flow Rate". www.grc.nasa.gov. Retrieved 2017-04-10.
  3. Curran, E. T.; Murthy, S. N. B. (2001-01-01). Scramjet Propulsion. AIAA. ISBN   9781600864414.
  4. Molder, Sannu. "Hypersonic Air Intake Design for High Performance and Starting" (PDF). Department of Mechanical Engineering, McGill University. Quebec: NATO.
  5. 1 2 3 Musk, Elon (August 12, 2013). "Hyperloop Alpha" (PDF). SpaceX. pp. 3–4. Retrieved August 14, 2013.
  6. Rudolf, Alexander (1996). Comparison of systems for active and passive flow bypassing. Lausanne: EPFL.{{cite book}}: |work= ignored (help)
  7. Rudolf, Alexander (1998). Simulation of compressible flow in tunnel systems induced by trains traveling at high speed. Lausanne: EPFL. p. 173.{{cite book}}: |work= ignored (help)
  8. Van Wie, D; Kwok, F; Walsh, R (July 1996). "Starting characteristics of supersonic inlets". AIAA 96-2914. doi:10.2514/6.1996-2914. The ability of the classical Kantrowitz limit to predict the restart contraction ratio was assessed, and it was shown to be applicable for the hard unstart/restart configurations.