Kenworth 10-ton 6x6 heavy wrecking truck

Last updated
Heavy Wrecking Truck M1
Ward La France M1A1 Heavy Wrecker - Flickr - Joost J. Bakker IJmuiden.jpg
Ward LaFrance M1A1
Type10-ton 6x6 wrecker
Place of originUnited States
Production history
DesignerCorbitt
ManufacturerKenworth, Ward LaFrance
Produced1941-1945
No. built5,765 (all models)
VariantsM1A1
Specifications (M1A1 [1] )
Mass31,200 lb (14,200 kg)
Length23 ft 5 in (7.14 m)
Width8 ft 3 in (2.51 m)
Height9 ft 9 in (2.97 m)
EngineContinental 22-R
145 hp (108 kW)
Transmission5 speed x 2 range trf. case
SuspensionLive axles on leaf springs
Operational
range
250 mi (402.3 km)
Maximum speed 45 mph (72 km/h)

The Kenworth 10-ton 6x6 heavy wrecking truck (G116) (officially Heavy Wrecking Truck M1) was the standard heavy wrecker of the US Army during World War II. It was replaced in the 1950s by 5-ton wreckers.

Contents

History

In 1939-1941 the Army Ordnance Corps was developing a complete line of tactical trucks that could operate over all roads and cross-country terrain in all weather. Corbitt, a small company which had sold the US Army trucks since 1917, was working on designs for heavy-duty conventional 6x6s trucks. In 1940 their designs for a 6-ton truck and a 10-ton wrecker chassis were standardized, with Corbitt to build 6-ton cargo trucks, while the 10-ton wreckers were contracted to Kenworth Motor Truck Corp. and Ward LaFrance Truck Corp. Ward LaFrance began production in 1941 and would build 4,925 vehicles. Kenworth began in 1942, but because of interruptions in manufacturing only built 840. At first the manufacturers' chassis were similar and used the same components. After the 1943 upgrade to -A1 standard, the two chassis were mechanically identical and parts were interchangeable. After the war, the rating of the 10-ton wrecker was lowered to 6-ton. [2] [3] [4]

Engine and driveline

Continental 22-R Continental 22-R right.tif
Continental 22-R
M1A1 shift plate M1A1 shift plate.jpg
M1A1 shift plate

A Continental 22-R engine was used by all trucks. This 501 cu in (8.2 L) overhead valve inline 6 cylinder gasoline engine developed 145 hp (108 kW) at 2400 rpm and 372 lbf⋅ft (504 N⋅m) of torque. [5]

The 5-speed manual Fuller transmission had a very low 1st gear, was direct in 4th and had an overdrive 5th. A separate 2-speed transfer case also engaged or disengaged the front axle. [6]

Chassis

The M1 had a ladder frame with three live beam axles, the front on leaf springs, the rear tandem on leaf springs with locating arms. All models had a 181 in (4.60 m) wheelbase. The M1 weighed 27,330 lb (12,400 kg), the -A1 31,200 lb (14,200 kg). Brakes were full air, the tires were 11.00x20 with dual rear tires. [7]

In addition to the wrecking body, all trucks had a 20,000 lb (9,100 kg) front winch and a rear pintle hitch. Not intended to carry a load, the M1 could support 8,000 lb (3,600 kg) while towing up to 60,000 lb (27,000 kg). [8] The -A1 upgrade also had a rear winch, heavier bumpers, and a large front tow-bar, allowing the truck to recover and move light armored vehicles. [3]

Bodies

M1A1 lifting a Dodge WC52 .mw-parser-output .frac{white-space:nowrap}.mw-parser-output .frac .num,.mw-parser-output .frac .den{font-size:80%;line-height:0;vertical-align:super}.mw-parser-output .frac .den{vertical-align:sub}.mw-parser-output .sr-only{border:0;clip:rect(0,0,0,0);clip-path:polygon(0px 0px,0px 0px,0px 0px);height:1px;margin:-1px;overflow:hidden;padding:0;position:absolute;width:1px} 3/4-ton truck M1A1 Wreck w-M37.jpg
M1A1 lifting a Dodge WC52 3⁄4-ton truck

Early models used the manufacturer's commercial cab, fenders, and specific hoods, making the two models look different. The -A1 models had open military cabs, flat fenders, and similar hoods, making all look the same. [3]

All bodies used by both manufacturers were built by Garwood. A single boom could be raised and lowered by cable, rotate 180°, and carried a cable from a 47,500 lb (21,500 kg) winch. Outriggers and braces on both the body and the boom itself allowed 16,000 lb (7,300 kg) to be lifted throughout the rear 180° of the truck. [9] In early models, all actions except for the winches were manual; later models had powered booms. The -A1 upgrade had a different boom and the front sides of the body were cut away from the mast and spare tires. [3] [10] [11]

Notes

  1. ↑ TM 9-796 (1944), pp. 6, 12–13.
  2. ↑ Crismon (2001).
  3. 1 2 3 4 Doyle (2003).
  4. ↑ Ware (2014).
  5. ↑ TM 9-796 (1944), pp. 147–149.
  6. ↑ TM 9-796 (1944), p. 23.
  7. ↑ TM 9-796 (1944), p. 11.
  8. ↑ TM 9-796 (1944), p. 12.
  9. ↑ TM 9-796 (1944), pp. 29–46.
  10. ↑ TM 9-795 (1942), pp. 4–11.
  11. ↑ TM 9-796 (1944), pp. 7–11.

Related Research Articles

<span class="mw-page-title-main">Heavy Expanded Mobility Tactical Truck</span> US Army heavy tactical truck, in service since 1982

The Heavy Expanded Mobility Tactical Truck (HEMTT) is an eight-wheel drive, diesel-powered, 10-short-ton (9,100 kg) tactical truck. The M977 HEMTT first entered service in 1982 with the United States Army as a replacement for the M520 Goer, and since that date has remained in production for the U.S. Army and other nations. By Q2 2021, around 35,800 HEMTTs in various configurations had been produced by Oshkosh Defense through new-build contracts and around 14,000 of these had been re-manufactured. Current variants have the A4 suffix.

<span class="mw-page-title-main">Studebaker US6 2½-ton 6×6 truck</span> American exported military cargo vehicle

The Studebaker US6 (G630) was a series of 2+1⁄2-ton 6×6 and 5-ton 6×4 trucks manufactured by the Studebaker Corporation and REO Motor Car Company during World War II. The basic cargo version was designed to transport a 2+1⁄2-short-ton cargo load over any type of terrain in any weather. Most of these were exported to the Soviet Union under Lend-Lease by the USA during World War II, since the competing GMC 6×6 CCKW design proved to be more suitable for Western Front conditions.

<span class="mw-page-title-main">M939 series 5-ton 6×6 truck</span> 5-ton 6x6 trucks

The M939 is a 5-ton 6×6 U.S. military heavy truck. The basic cargo versions were designed to transport a 10,000 pounds (4,500 kg) cargo load over all terrain in all weather. Designed in the late 1970s to replace the M39 and M809 series of trucks, it has been in service ever since. The M939 evolved into its own family of cargo trucks, dump trucks, semi-tractors, vans, wreckers, and bare chassis/cabs for specialty bodies. 44,590 in all were produced.

<span class="mw-page-title-main">M19 Tank Transporter</span> 45-ton Truck-trailer

The M19 Tank Transporter was a heavy tank transporter system used in World War II and into the 1950s. It consisted of a 12-ton 6x4 M20 Diamond T Model 980 truck and companion 12-wheel M9 trailer.

<span class="mw-page-title-main">Diamond T</span> Defunct American motor vehicle manufacturer

The Diamond T Company was an American automobile and truck manufacturer. They produced commercial and military trucks.

<span class="mw-page-title-main">M35 series 2½-ton 6×6 cargo truck</span> US military truck

The M35 2½-ton cargo truck is a long-lived 2½-ton 6×6 cargo truck initially used by the United States Army and subsequently utilized by many nations around the world. Over time it evolved into a family of specialized vehicles. It inherited the nickname "Deuce and a Half" from an older 2½-ton truck, the World War II GMC CCKW.

<span class="mw-page-title-main">M39 series 5-ton 6×6 truck</span> 5-ton 6×6 truck

The M39 series 5-ton 6×6 truck (G744) was a family of heavy tactical trucks built for the United States Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg), 14 ft (4.3 m) long load over all terrain in all weather. In on-road service the load weight was doubled.

<span class="mw-page-title-main">GMC CCKW 2½-ton 6×6 truck</span> US WWII "deuce and a half" cargo truck

The GMC CCKW, also known as "Jimmy", or the G-508 by its Ordnance Supply Catalog nr, was a highly successful series of off-road capable, 21⁄2-ton, 6×6 trucks, built in large numbers to a standardized design for the U.S. Army, that saw heavy service, predominantly as cargo trucks, in both World War II and the Korean War. The original "Deuce and a Half", it formed the backbone of the famed Red Ball Express that kept Allied armies supplied as they pushed eastward after the Normandy invasion.

<span class="mw-page-title-main">M25 Tank Transporter</span> 40 ton (36,287 kg) 6x6 Tank recovery truck-trailer

The M25 Tank Transporter (G160) was a combination 6x6 M26 armored heavy tank transporter/tank recovery tractor and companion 40-ton M15 trailer introduced into US Army service in Europe in 1944–45. Manufactured by Pacific Car & Foundry Co., it was a substantial upgrade over the Diamond T M19 transporter/trailer duo introduced in 1940.

<span class="mw-page-title-main">Chevrolet G506</span> American Army 1⁄2-ton 4x4 truck

The G-506 trucks, 1+1⁄2-ton, 4x4, produced as the Chevrolet G7100 models, were a series of (light) medium four wheel drive trucks used by the United States Army and its allies during and after World War II. This series came in standard cargo, as well as many specialist type bodies.

<span class="mw-page-title-main">Mack NO 7½-ton 6x6 truck</span> American military heavy cargo truck

The Mack NO 7+1⁄2-ton 6x6 truck was a heavy 6x6 cargo truck designed in the 1940s by the American manufacturer Mack Trucks. It was used by the U.S. Army as an artillery tractor for heavy artillery during and after World War II. The official U.S. Army designation was: Truck, 7 1/2 ton, 6x6, Prime Mover. Its G-number was (G-532).

<span class="mw-page-title-main">M425 and 426 Tractor Truck</span> 5-ton 4x2 Semi-tractor

The M425 and M426 Tractor trucks (G671) were 5 ton (4,536kg) load rated 4x2 semi-tractors that were used from 1944 on by the US Army. They are famous for the use on the Red Ball Express from Normandy to the front, but were also used in the China Burma India Theater. After the war they were used in Europe, including during the Berlin Crisis, and in the Korean War.

<span class="mw-page-title-main">M123 and M125 10-ton 6x6 trucks</span> 10-ton 6x6 trucks

The Mack M123 (G792) was a 10-ton 6x6 semi-tractor introduced in 1955; the Mack M125 was a heavy cargo truck version of the M123. The M123 was used to tow tank transporter trailers while the M125 towed field artillery pieces.

<span class="mw-page-title-main">Mack Trucks in military service</span>

Mack Trucks has been selling heavy duty trucks and buses to the United States military since 1911. Virtually every model has been used. The majority have been commercial models designed and built by Mack with their own components, but they have also designed and built military specification tactical trucks. The military vehicles are rated by payload measured in tons.

<span class="mw-page-title-main">M809 series 5-ton 6×6 truck</span> 5-ton 6x6 trucks

The M809 Series 5-ton 6x6 truck (G908) was a family of heavy tactical trucks built for the United States Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg), 14 ft (4.3 m) long load over all terrain in all weather. In on-road service the load weight was doubled. Built by AM General, they evolved into the M939 Series.

<span class="mw-page-title-main">6-ton 6×6 truck</span> US military truck

The 6-ton 6×6 truck was a family of heavy tactical trucks built for the United States Army during World War II. The basic cargo version was designed to transport a 6- short ton (5,400 kg) cargo load over all terrain in all weather. The chassis were built by Brockway Motor Company, The Corbitt Company, The Four Wheel Drive Auto Company (FWD), Ward LaFrance Truck Corporation, and White Motor Company. They were replaced by the M54 5-ton 6x6 trucks in the 1950s.

<span class="mw-page-title-main">5-ton 6×6 truck</span>

The 5‑ton 6x6 truck, officially "Truck, 5-ton, 6x6", was a class of heavy-duty six-wheel drive trucks used by the US Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg) load over all roads and cross-country terrain in all weather. Through three evolutionary series there have been component improvements, but all trucks were mechanically very similar. They were the standard heavy-duty truck of the US military for 40 years, until replaced by the Medium Tactical Vehicle (MTV) beginning in 1991.

<span class="mw-page-title-main">2½-ton 6×6 truck</span> Class of military medium duty trucks

The 2+1⁄2-ton, 6×6 truck was a standard class of medium duty trucks, designed at the beginning of World War II for the US Armed Forces, in service for over half a century, from 1940 into the 1990s. Also frequently known as the deuce and a half, or just deuce, this nickname was popularized post WWII, most likely in the Vietnam war era. The basic cargo versions were designed to transport a cargo load of nominally 2+1⁄2 short tons over all terrain, in all weather. The 2+1⁄2-ton trucks were used ubiquitously in World War II, and continued to be the U.S. standard medium duty truck class after the war, including wide usage in the Korean and Vietnam Wars, as well as the first Gulf War.

<span class="mw-page-title-main">Diamond T 4-ton 6×6 truck</span> US Army heavy tactical truck

The Diamond T 4-ton 6×6 truck was a heavy tactical truck built for the United States Army during World War II. Its G-number was G-509. Cargo models were designed to transport a 4-ton (3,600 kg) load over all terrain in all weather. There were also wrecker, dump, and other models. They were replaced by the M39 series 5-ton 6×6 trucks in the 1950s.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.