Mack NJU 5-ton 4x4 truck

Last updated
Truck Tractor, Ponton, C. O. E., 5-6 ton, 4x4
(Mack Model NJU-1)
Mack NJU-12.tif
Mack NJU-1 Ponton tractor
Type5- to 6-ton 4x4 semi-tractor
Place of originUnited States
Production history
ManufacturerMack Trucks
Produced1941-1942
No. built692 (+8 NJU-2)
VariantsNJU-2
Specifications (NJU-1 [1] )
Mass16,580 lb (7,520 kg)
Length19 ft 9 in (6.02 m)
Width8 ft (2.44 m)
Height9 ft 6 in (2.90 m)

EngineMack EN532
136 hp (101 kW)
Transmission5 speed x 2 range trf case
SuspensionLive axles on leaf springs

The Mack NJU 5- to 6-ton 4x4 Ponton tractor (G639) was a semi-tractor designed to haul bridging equipment during World War II. Of the 700 built 119 were supplied to the British in Egypt, 8 were built with van bodies, and the rest were used as a substitute standard by the US Army.

Contents

History

In 1940 the US Army ordered 700 Mack 4 x 4 truck tractors, intended to tow pontoon-carrying semi-trailers. 694 were delivered in 1941 and the last 6 in 1942. An Autocar design was standardized by the US Army and only 700 NJUs were built.

692 NJU-1 tractors and 8 NJU-2 vans designed to tow topographical trailers were delivered.

In November 1941 119 semi-tractors were delivered to the British army in Egypt, where they bore War Department H-numbers.

Some NJU-1's went into French Army service post war. [2]

Design

Mack NJU-1 Mack NJU-1.5.jpg
Mack NJU-1

The design was a militarized version of a civilian Cab Over Engine (COE) model, partly redesigned to make it 4WD. A Mack engine and transmission were matched with a Timken 2-speed transfer case and double-reduction axles. The EN532 engine was a 532 cu in (8.7 L) L-head inline 6 cylinder gasoline engine developing 136 hp (101 kW) at 2500  rpm. The 5-speed transmission drove the separate transfer case. [3]

A ladder frame had two live beam axles on leaf springs with a 155 inches (3.94 m) wheelbase. There was a 15,000 pounds (6,800 kg) winch behind the front bumper and a pintle hitch at the rear. A civilian type closed cab was used, right behind the cab was an open cargo box used to carry engineer tools, outboard motors, and other equipment.

Early semi-tractors and all vans used 9.75x20 tires, later semi-tractors had 12.00x20 tires. All trucks had dual rear tires. All trucks had full-air brakes. [4]

Related Research Articles

<span class="mw-page-title-main">Mack Trucks</span> American truck manufacturing company

Mack Trucks, Inc., is an American truck manufacturing company and a former manufacturer of buses and trolley buses. Founded in 1900 as the Mack Brothers Company, it manufactured its first truck in 1905 and adopted its present name in 1922. Mack Trucks is a subsidiary of AB Volvo, which purchased Mack along with its then parent company Renault Véhicules Industriels in 2000.

<span class="mw-page-title-main">Studebaker US6 2½-ton 6×6 truck</span> American exported military cargo vehicle

The Studebaker US6 (G630) was a series of 2+12-ton 6×6 and 5-ton 6×4 trucks manufactured by the Studebaker Corporation and REO Motor Car Company during World War II. The basic cargo version was designed to transport a 2+12-short-ton cargo load over any type of terrain in any weather. Most of these were exported to the Soviet Union under Lend-Lease by the USA during World War II, since the competing GMC 6×6 CCKW design proved to be more suitable for Western Front conditions.

<span class="mw-page-title-main">M939 series 5-ton 6×6 truck</span> 5-ton 6x6 trucks

The M939 is a 5-ton 6×6 U.S. military heavy truck. The basic cargo versions were designed to transport a 10,000 pounds (4,500 kg) cargo load over all terrain in all weather. Designed in the late 1970s to replace the M39 and M809 series of trucks, it has been in service ever since. The M939 evolved into its own family of cargo trucks, dump trucks, semi-tractors, vans, wreckers, and bare chassis/cabs for specialty bodies. 44,590 in all were produced.

<span class="mw-page-title-main">M19 Tank Transporter</span> 45-ton Truck-trailer

The M19 Tank Transporter was a heavy tank transporter system used in World War II and into the 1950s. It consisted of a 12-ton 6x4 M20 Diamond T Model 980 truck and companion 12-wheel M9 trailer.

<span class="mw-page-title-main">M39 series 5-ton 6×6 truck</span> 5-ton 6×6 truck

The M39 series 5-ton 6×6 truck (G744) was a family of heavy tactical trucks built for the United States Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg), 14 ft (4.3 m) long load over all terrain in all weather. In on-road service the load weight was doubled.

<span class="mw-page-title-main">GMC CCKW 2½-ton 6×6 truck</span> US WWII "deuce and a half" cargo truck

The GMC CCKW, also known as "Jimmy", or the G-508 by its Ordnance Supply Catalog nr, was a highly successful series of off-road capable, 212-ton, 6×6 trucks, built in large numbers to a standardized design for the U.S. Army, that saw heavy service, predominantly as cargo trucks, in both World War II and the Korean War. The original "Deuce and a Half", it formed the backbone of the famed Red Ball Express that kept Allied armies supplied as they pushed eastward after the Normandy invasion.

<span class="mw-page-title-main">M915 (truck)</span> Tractor unit used for line haul missions by the US Army

The M915 is a tractor unit used for line haul missions by the United States Army. Designed for use on improved roads it does not have a driven front axle.

<span class="mw-page-title-main">Mack NO 7½-ton 6x6 truck</span> American military heavy cargo truck

The Mack NO 7+12-ton 6x6 truck was a heavy 6x6 cargo truck designed in the 1940s by the American manufacturer Mack Trucks. It was used by the U.S. Army as an artillery tractor for heavy artillery during and after World War II. The official U.S. Army designation was: Truck, 7 1/2 ton, 6x6, Prime Mover. Its G-number was (G-532).

<span class="mw-page-title-main">Mack model EH trucks</span> American military truck

The Mack model EH trucks were a family of 4x2 trucks used by the US and British military before and during World War II. They were built in conventional and cab-over-engine models and were used as both trucks and semi-tractors. Originally a commercial design, in 1943 a military version became standard.

<span class="mw-page-title-main">M425 and 426 Tractor Truck</span> 5-ton 4x2 Semi-tractor

The M425 and M426 Tractor trucks (G671) were 5 ton (4,536kg) load rated 4x2 semi-tractors that were used from 1944 on by the US Army. They are famous for the use on the Red Ball Express from Normandy to the front, but were also used in the China Burma India Theater. After the war they were used in Europe, including during the Berlin Crisis, and in the Korean War.

<span class="mw-page-title-main">M123 and M125 10-ton 6x6 trucks</span> 10-ton 6x6 trucks

The Mack M123 (G792) was a 10-ton 6x6 semi-tractor introduced in 1955; the Mack M125 was a heavy cargo truck version of the M123. The M123 was used to tow tank transporter trailers while the M125 towed field artillery pieces.

<span class="mw-page-title-main">Autocar U8144T 5- to 6-ton 4×4 truck</span> US heavy four-wheel drive truck

The Autocar Model U8144T, officially "5- to 6-Ton, 4×4, Ponton Tractor Truck", was the largest, and most heavy-duty, of a family of heavy four-wheel drive trucks developed for, and deployed primarily with, the United States Army in World War II. They were of a "cab over engine" design, and produced by the Autocar Company from 1941 to 1945 with 2,711 being built.

<span class="mw-page-title-main">Mack Trucks in military service</span>

Mack Trucks has been selling heavy duty trucks and buses to the United States military since 1911. Virtually every model has been used. The majority have been commercial models designed and built by Mack with their own components, but they have also designed and built military specification tactical trucks. The military vehicles are rated by payload measured in tons.

<span class="mw-page-title-main">M809 series 5-ton 6×6 truck</span> 5-ton 6x6 trucks

The M809 Series 5-ton 6x6 truck (G908) was a family of heavy tactical trucks built for the United States Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg), 14 ft (4.3 m) long load over all terrain in all weather. In on-road service the load weight was doubled. Built by AM General, they evolved into the M939 Series.

<span class="mw-page-title-main">6-ton 6×6 truck</span> US military truck

The 6-ton 6×6 truck was a family of heavy tactical trucks built for the United States Army during World War II. The basic cargo version was designed to transport a 6- short ton (5,400 kg) cargo load over all terrain in all weather. The chassis were built by Brockway Motor Company, The Corbitt Company, The Four Wheel Drive Auto Company (FWD), Ward LaFrance Truck Corporation, and White Motor Company. They were replaced by the M54 5-ton 6x6 trucks in the 1950s.

<span class="mw-page-title-main">5-ton 6×6 truck</span>

The 5‑ton 6x6 truck, officially "Truck, 5-ton, 6x6", was a class of heavy-duty six-wheel drive trucks used by the US Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg) load over all roads and cross-country terrain in all weather. Through three evolutionary series there have been component improvements, but all trucks were mechanically very similar. They were the standard heavy-duty truck of the US military for 40 years, until replaced by the Medium Tactical Vehicle (MTV) beginning in 1991.

<span class="mw-page-title-main">Oshkosh M1070</span> Tank transporter

The Oshkosh M1070 is a U.S. Army tank transporter tractor unit. The primary purpose of this combination for the U.S. Army is the transport of the M1 Abrams tank.

<span class="mw-page-title-main">2½-ton 6×6 truck</span> Class of military medium duty trucks

The 2+12-ton, 6×6 truck was a standard class of medium duty trucks, designed at the beginning of World War II for the US Armed Forces, in service for over half a century, from 1940 into the 1990s. Also frequently known as the deuce and a half, or just deuce, this nickname was popularized post WWII, most likely in the Vietnam war era. The basic cargo versions were designed to transport a cargo load of nominally 2+12 short tons over all terrain, in all weather. The 2+12-ton trucks were used ubiquitously in World War II, and continued to be the U.S. standard medium duty truck class after the war, including wide usage in the Korean and Vietnam Wars, as well as the first Gulf War.

<span class="mw-page-title-main">Mack NR</span> Cargo truck

The Mack NR was a heavy 6x4 cargo truck designed and produced in the 1940s by the American manufacturer Mack Trucks. It was used mainly by the British Army to transport cargo and materiel over long distances during World War II. The official U.S. Army designation was: Truck, 10 ton, 6x4, Cargo. Its G-number was (G-528).

<span class="mw-page-title-main">Diamond T 4-ton 6×6 truck</span> US Army heavy tactical truck

The Diamond T 4-ton 6×6 truck was a heavy tactical truck built for the United States Army during World War II. Its G-number was G-509. Cargo models were designed to transport a 4-ton (3,600 kg) load over all terrain in all weather. There were also wrecker, dump, and other models. They were replaced by the M39 series 5-ton 6×6 trucks in the 1950s.

References

  1. Doyle, David (2011). Standard Catalog of U.S. Military Vehicles (2nd ed.). Krause Publications. p. 174. ISBN   978-0-87349-508-0.
  2. Vanderveen, Bart (1998). A record of military Macks in the Services and beyond. After the Battle. pp. 41–42. ISBN   1-870067-09-6.
  3. Crismon, Fred W (2001). US Military Wheeled Vehicles (3 ed.). Victory WWII Pub. p. 285. ISBN   0-970056-71-0.
  4. Vanderveen (1998).