 | |
| Laird LC-B in 1927 | |
| Role | Two passenger civil transport |
| National origin | United States |
| Manufacturer | E. M. Laird Airplane Company |
| First flight | 1925 |
| Number built | about 35 |
The Laird LC-B was a three seat, single-engined biplane, built for private owners in the U.S. in the late 1920s and offering a variety of engines. About 35 had been built before production ceased in the mid-1930s. Two have been restored to flight.
Many Laird aircraft were designated as LC (Laird Commercial). This was followed by an airframe code, B in this case, and an engine code. In the case of the LC-B the latter was the engine power; later types had a single letter code such as W for Wasp.
All LC-B variants were unequal span single bay biplanes which seated three in two open cockpits. Though some sources suggest the wing dimensions varied between models, [1] detailed contemporary reports of current models in 1927 [2] and 1931 [3] show no difference in spans, and lengths that depend only slightly on engine type.
The LB-Bs had wings of rectangular plan out to rounded tips, built around twin spruce box spars, plywood and spruce ribs and fabric-covered. They were single bay biplanes, their wings braced together with only slight stagger by a pair of parallel interplane struts on each side. Outward-leaning, N-form cabane struts joined the fuselage to the upper wing centre section. Ailerons were fitted to both upper and lower wings and externally interconnected. There were long, near-rectangular cut-outs in the upper wings to improve the field of view from the pilot's cockpit. [2] [3]
The principal difference between the LC-B subtypes was the engine fitted. The earliest models were mostly fitted with 200–220 hp (150–160 kW) Wright J-4/5 Whirlwinds, [1] though Curtiss radial engines could also be used. [2] By 1930, most had either the Wright J-5 300 hp (220 kW) or the Wright J-6. [1] Behind the engine the fuselage had a dural tube structure and was fabric-covered. The two passengers sat side-by-side under the upper wing in an easily accessed open cockpit. Tail surfaces were also fabric-covered and, with the exception of the wooden-framed tailplane, had steel structures. All the rear surfaces were full and rounded, apart from the tailplane's straight leading edge. The rudder was balanced. [2]
The LC-Bs had fixed, split axle, conventional landing gear. The main legs, with rubber cord shock absorbers, and drag struts were mounted on the lower fuselage longerons. Wheel brakes were fitted on 1930s variants at least. The axles joined on a short frame just below the fuselage underside. A long tailskid extended from the extreme fuselage. [2] [3]
The year of the first flight of the LC-B is variously given as 1924 [4] or 1925. [1] 11 of the 1925 LC-B series were built, one setting a record for the number of inside loops flown continuously (1,073). The pilot was Charles "Speed" Holman. [1]
Two LC-Rs with 220 hp (160 kW) J-5 Whirlwind engines were built in 1928. They were single seat racers, one competing in the 1930 Nationals. [1]
Less than ten further aircraft were built in the 1930-1 batch and a further 11 of the wider LC-1Bs in 1935 ended LC-B production at a total of less than 34. [1] Others have it as 36. [4] Most of these were registered in the U.S. but four LB-200s went to Canada. [5]
After World War II one LC-1B300, N10402, was operated as a crop sprayer. Carefully restored, it still flies, owned by the Western Antique Aeroplane & Automobile Museum. In 2011 an airworthy LC-B200, NC6906, was in the Howie Collection in Decatur, Illinois. [6] CF-APY, a B200, was flying until at least 2008 [7] but has been on display since 2014 or earlier at the Reynolds Alberta Museum. [8]
Data from Aerofiles:Laird [1]
Data from Aero Digest (April 1931) [3]
General characteristics
Performance
The Douglas Y1B-7 was a 1930s American bomber aircraft. It was the first US monoplane given the B- 'bomber' designation. The monoplane was more practical and less expensive than the biplane, and the United States Army Air Corps chose to experiment with monoplanes for this reason. At the time the XB-7 was ordered, it was being tested by Douglas Aircraft as an observational plane.
The Bartel BM 5, initially known as M.5 was a Polish biplane advanced trainer used from 1930 to 1939 by the Polish Air Force, manufactured in the Samolot factory in Poznań.
The Travel Air 2000/3000/4000 were open-cockpit biplane aircraft produced in the United States in the late 1920s by the Travel Air Manufacturing Company. During the period from 1924–1929, Travel Air produced more aircraft than any other American manufacturer, including over 1,000 biplanes. While an exact number is almost impossible to ascertain due to the number of conversions and rebuilds, some estimates for Travel Air as a whole range from 1,200 to nearly 2,000 aircraft.
The Sopwith Admiralty Type 860 was a 1910s British biplane seaplane torpedo bomber designed and built for the Admiralty by the Sopwith Aviation Company.
The PWS-21 was a Polish passenger aircraft for 4 passengers, built in PWS factory in 1930, that remained a prototype.
The PWS-12 was a biplane trainer designed and developed by Podlaska Wytwórnia Samolotów (PWS). It entered production as the PWS-14.
The Spartan C3 is an American three-seat open-cockpit utility biplane from the late 1920s.
The PWS-5 or PWS-5t2, was a multi-seated Polish liaison aircraft, developed in 1928 by PWS.
The PWS-6, was a Polish liaison aircraft, developed in 1930 by the PWS, that remained a prototype.
The PWS-11 was a Polish aerobatic and trainer aircraft, developed in 1928-1929 by PWS, which remained a prototype.
The Hispano Suiza E-30, later renamed Hispano E-30, was designed in Spain in 1930 as a multi-purpose intermediate trainer. It was a single engine, parasol wing monoplane. About 25 served with the Spanish armed forces until 1945.
The Caudron C.220 was a two-seat French biplane trainer. Only two were built, using different engines.
The Heinkel HD 20 was a twin engine, three seat German biplane built in 1926 for civil survey work.
The Hess H-2 Blue Bird was a small US transport biplane, built in the 1920s and carrying two or four passengers according to engine power.
The Simplex Red Arrow was a US single-engined monoplane produced in the late 1920s and early 1930s and intended as club machine or mail transport. Most used radial engines in the 90–110 hp (67–82 kW) range. They carried one or two passengers whose seats could be open or enclosed. One variant, the Red Arrow Dual Plane, was easily converted from monoplane to biplane and was available with two versions of the much more powerful Wright Whirlwind engines. In all about 20 were built.
The Curtiss-Wright CW-14, named variously Travel Air, Sportsman, Speedwing and Osprey is an American 3-seat open cockpit single-bay biplane from the 1930s that was developed by Travel Air as a replacement for the highly successful Travel Air 4000. As a result of the Great Depression, which also limited sales, Travel Air merged into the Curtiss-Wright group of companies before production could start, so all examples were built by Curtiss-Wright. Its main claim to fame would be as the most numerous aircraft used in the Chaco war, where it formed the backbone of the Bolivian Air Force.
The American Eagle Phaeton was an American three seat, single engine sports biplane produced from 1929 until American Eagle failed financially in 1932. About 34 were built.
The Franklin Sport is a two seat sport and training biplane built in the U.S. in 1930. Several different engines, in the power range 55–90 hp (41–67 kW), were fitted. Two remained airworthy in 2011.
The Ireland Neptune was a four or five place pusher configuration biplane sold in flying boat and amphibian versions. Designed in the U.S. and first flown in 1927, well over 50 were built.
The Zenith Z-6 is a single engine biplane U.S. airliner built in the late 1920s. Its cabin, in the fuselage immediately behind its radial engine, holds five or six passengers depending on engine power. It is flown from an open cockpit further aft. Nine were completed and one has been restored to flight.