Land Rover Llama

Last updated

The Land Rover Llama is a vehicle that was designed and developed by the British company Land Rover in the mid-1980s. 11 prototypes and a single production vehicle were built during 1986/7 with the hope of winning a contract from the Ministry of Defence (MoD) to replace its existing fleet of Land Rover 101 gun tractors. Heavily based on the contemporary Land Rover One Ten, the Llama was intended to be sold on both the military and civilian markets. However, the MoD did not choose Land Rover's design and without the security of these sales Land Rover was unwilling to risk putting the Llama on the market.

Contents

The one-off production Llama at the Heritage Motor Centre fitted with a solid rear body intended for use as either an Ambulance or a Communications vehicle. This is also one of the Llamas fitted with an under-floor recovery winch. LandRoverLlama.JPG
The one-off production Llama at the Heritage Motor Centre fitted with a solid rear body intended for use as either an Ambulance or a Communications vehicle. This is also one of the Llamas fitted with an under-floor recovery winch.

The name 'Llama' was only the codename given to the development project- the vehicle was actually called the Land Rover 110 Forward Control in official Land Rover documentation. However, the design is now known to enthusiasts of the Land Rover marque as 'the Llama'.

Background

Land Rover as a company went through a period of restructuring in the 1980s. This involved improving the company's products, leading to the launch of the Ninety/One Ten/127 range in 1983/4 as well as updates to the Range Rover. When Rover car production left the Solihull factory, Land Rover was able to close its numerous satellite factories in Birmingham and bring engine, gearbox and other component manufacture under one roof. As part of these changes, Land Rover wanted to reduce the amount of specialist conversion work that it sent 'out of house' to other companies. This led to the creation of the Special Vehicles Division and to the start of the Llama project.

In order to open up the more heavy-duty end of the off-road vehicle market (as occupied by vehicles such as the Mercedes-Benz Unimog), it was decided to develop a version of the existing Land Rover capable of carrying larger and heavier loads. Such a vehicle would also be capable of being the basis of numerous bodystyles and equipment options.

The project was spurred on by a decision from the Ministry of Defence to replace its fleet of Land Rover 101 Forward Controls, which were gun tractors specially built by Land Rover in the 1970s. Over 1700 101s had been sold to the MoD, plus small numbers to other military buyers. At a time when Land Rover sales were falling worldwide, winning such an order would provide a much-needed boost to the company.

Land Rover had produced 'Forward Control' (i.e.- vehicles where the driving controls were positioned over or just ahead of the front axle) of its Series II models in the 1960s, based on the standard long-wheelbase chassis. It made sense to use a similar design for the new version.

Design

Project Llama began in 1985. The chassis was based on that of the One Ten, and that vehicle's basic layout was adopted. The chassis was made of thicker steel than normal Land Rover chassis. Land Rover claimed that 85% of the chassis and drivetrain components of the Llama were taken from existing Land Rover models. A 3.5-litre (215 c.u.) Rover V8 with Zenith/Stromberg carburetters was used, tuned to deliver 110 horsepower (less than the power developed by the same engine in other Land Rover products). The 5-speed LT85 manual transmission from the V8-powered One Ten was used, with the LT230 two-speed, permanent 4 wheel drive transfer box.

The coil spring suspension used existing components, but with unique twin rear springs to give a 1.75-ton payload. Using standard One Ten axles (Dana-designed units built by Salisbury Engineering) led to stability problems, so bespoke units were used, being 12-inches (30 cm) wider than the standard ones.

Land Rover developed a fibreglass cab body on a steel-tube 'spaceframe'. This was hinged at the front and tilted forwards to allow access to the engine and gearbox (engine access had been an issue with the older Forward Control models). The cab was fully trimmed in plastic and rubber panels, using the instrument pod from the existing Land Rover models, and other controls and components from other Rover Group cars such as the Austin Metro and the Austin Montego. This well-equipped interior reflected Land Rover's intentions that the Llama should eventually be sold on the civilian market.

The prototypes were fitted with both 'General Service' canvas-covered rear bodies or with a steel/fibreglass box body. Some Llamas were fitted with a mechanical winch driven from the gearbox, which could be fed through the front or rear chassis cross-members for vehicle recovery.

One Llama vehicle was built on the Solihull production line to test the suitability of the vehicle to mass production and to see if the Llama could be built on the Land Rover One Ten production line.

Trials

The Llama prototypes were sent to the MoD for testing. These were fitted with a variety of rear bodies to demonstrate the versatility of the design. These included the standard open drop-side rear tray, the 'General Service' version with a removable canvas hood, a demountable glass-fibre 'pod' that could be loaded and unloaded from the chassis by a hydraulic hook, a solid enclosed rear body (mocked-up as both an Ambulance and a radio communications vehicle) and one example was fitted with a mock-up missile launcher. Vehicles were subjected to load-carrying, off-road driving, stability, cold-weather and endurance/performance tests. These showed several flaws with the design. The main one was that the coil-spring suspension and high centre of gravity led to poor stability over rough ground when fully laden. The performance of the 2.5-ton vehicle was poor, especially when loaded. The petrol engine fitted to the Llama was also a problem, as the MOD had recently standardised on diesel power for all its vehicles. The V8 was Land Rover's most powerful engine available, and bringing in a more powerful diesel from another builder would remove the Llama's key selling feature- its parts commonality with the standard Land Rovers (of which the MoD had a fleet of nearly 20,000).

Land Rover built one prototype Llama powered by its 85-horsepower Diesel Turbo engine. However, this had unacceptably low performance.

RB 44 Truck, Utility, Heavy Truck Utility Heavy (TUH) MOD 45114051.jpg
RB 44 Truck, Utility, Heavy

The MoD finally selected a 4-wheel drive version of the Dodge 50 truck, converted by Reynolds-Boughton Engineering and designated the RB44. After only a few years in service the entire fleet had to be overhauled and fitted with a crucial brake modification at major costs to the UK taxpayer. The poor reliability of the RB44 meant that the British Army opted to overhaul its fleet of Land Rover 101s, which remained in service until the early years of the 21st century.

Cancellation

Without the guaranteed orders from the MoD, Land Rover did not want to risk launching the Llama on the civilian market, in direct competition to the successful Unimog, especially given the Llama's lack of a suitable engine. The project was cancelled in early 1988.

Effect on the Land Rover Range

Very little new technology was developed for the Llama project, and so there was no real effect on the existing range. However, the Ninety/One Ten range, and their successors, carried a reminder of the Llama project for many years.

The cluster of warning lights on the dashboard of the Land Rover was modified in anticipation of the launch of the Llama to include a new light. This carried the symbol of a tilting lorry cab with a large exclamation mark. Its purpose would have been to warn the driver of a Llama if the locking mechanism for the tilting cab was unlocked. This new cluster was fitted to all Land Rovers from mid-1987 (with the cab-lock warning light not wired in, obviously). This design of warning light cluster remained in use on Land Rover Defenders until 1998, 10 years after the Llama project was cancelled.

Existing Llamas

Sources

Related Research Articles

Land Rover Car marque owned by Jaguar Land Rover and former British car company

Land Rover is a British brand of predominantly four-wheel drive, off-road capable vehicles, owned by multinational car manufacturer Jaguar Land Rover (JLR), since 2008 a subsidiary of India's Tata Motors. JLR currently builds Land Rovers in Brazil, China, India, Slovakia, and the United Kingdom. The Land Rover name was created in 1948 by the Rover Company for a utilitarian 4WD off-roader; yet today Land Rover vehicles comprise solely upmarket and luxury sport utility cars.

Unimog

The Unimog is a range of multi-purpose all-wheel drive medium trucks produced by Daimler AG and sold under the Mercedes-Benz brand. In the United States and Canada, the Unimog was sold as the Freightliner Unimog.

Leyland Motors

Leyland Motors Limited was a British vehicle manufacturer of lorries, buses and trolleybuses. The company diversified into car manufacturing with its acquisitions of Triumph and Rover in 1960 and 1967, respectively. It gave its name to the British Leyland Motor Corporation, formed when it merged with British Motor Holdings in 1968, to become British Leyland after being nationalised. British Leyland later changed its name to simply BL, then in 1986 to Rover Group.

Land Rover Discovery Motor vehicle

Land Rover Discovery, sometimes referred to as "Disco" in slang or popular language, is a series of medium to large premium SUVs, produced under the Land Rover marque, from the British manufacturer Land Rover, and later Jaguar Land Rover. The series is currently in its fifth iteration, the first of which was introduced in 1989, making the Discovery the first new model series since the launch of the 1970 Range Rover – on which it was based – and only the third new product line since the conception of the Land Rover by Rover in 1948. The model is sometimes called influential, as one of the first to market a true off-road capable family car.

Land Rover Defender Motor vehicle

The Land Rover Defender is a British off-road vehicle. It has four-wheel drive, and was developed in the 1980s from the original Land Rover series which was launched at the Amsterdam Motor Show in April 1948.

Land Rover 101 Forward Control Light utility vehicle by Land Rover

The 101 Forward Control or Land Rover 101FC was a light utility vehicle produced by Land Rover for the British Army. It was not available to the public off the production line, but was as military surplus.

Medium Tactical Vehicle Replacement Type of Family of 6x6 tactical trucks with 7-ton payload (U.S. tons)

The Medium Tactical Vehicle Replacement (MTVR) is a series of vehicles, based on a common chassis that vary by payload and mission requirements. The MTVR is a purpose-designed military vehicle, although a small number of vehicles have been sold commercially for specialized operations such as wildfire fighting.

Austin Champ Motor vehicle

The Austin Champ was a military and civilian jeep-like vehicle made by the Austin Motor Company in the 1950s. The army version was officially known as "Truck, 1/4 ton, CT, 4×4, Cargo & FFW, Austin Mk.1" however the civilian name "Champ" was universally, if unofficially, applied to it. The majority of Champs produced went to the British Army.

Shorland armoured car Type of Armoured car

The Shorland is an armoured patrol car that was designed specifically for the Royal Ulster Constabulary by Frederick Butler. The first design meeting took place in November 1961. The third and final prototype was completed in 1964 and the first RUC Shorlands were delivered in 1966. They were reallocated to the Ulster Defence Regiment in 1970. The Royal Ulster Constabulary soon replaced the Shorland with an armoured Land Rover with more conventional profile and no machine gun turret.

LDV Pilot Motor vehicle

The LDV Pilot is a panel van that was produced by LDV Limited from 1996 until 2006, and closely based on preceding models dating back to 1974 Leyland Sherpa.

Land Rover Tangi Type of armoured vehicle

The Land Rover Tangi is a type of armoured vehicle, based on the Land Rover chassis and used in policing in Northern Ireland. They were used by the Royal Ulster Constabulary (RUC) and are currently used by their replacement, the Police Service of Northern Ireland (PSNI). The vehicle was designed and built in house by the Royal Ulster Constabulary's own engineers.

Range Rover Classic Motor vehicle

The Range Rover Classic is a 4x4, mid-size Sport utility vehicle series produced from 1969 to 1996 – initially by the Rover division of British Leyland, and latterly by the Rover Group. The first generation of vehicles produced under the Range Rover name, it was built as a two-door model for its first 11 years, until a four-door also became available in 1981. The two-door version remained available until 1994, the year when the second generation was launched. At that time, Land Rover rebranded the original Range Rover under the newly coined term "Range Rover Classic", to distinguish it from its P38A successor, when the two were briefly built alongside, and applied the name retrospectively to all first-generation Range Rovers.

Land Rover Wolf Type of Light utility vehicle

The Land Rover Wolf is a light military vehicle based on the Land Rover Defender introduced in 1994. The MoD designates the Wolf 90 as Truck Utility Light (TUL) HS and the Wolf 110 as Truck Utility Medium (TUM) HS. Where HS stands for High Specification. Land Rover calls it eXtra Duty (XD).

The Mohafiz is an internal security vehicle designed and manufactured at Heavy Industries Taxila (HIT) in Pakistan based on the chassis of commercial vehicle.

Land Rover series Motor vehicle

The Land Rover series I, II, and III, or simply the Land-Rover, are compact British off-road vehicles, produced by the Rover Company since 1948, and later by British Leyland. Though unapologetically inspired by the World War II jeep, the Land Rover immediately distinguished itself from all other cars. From launch, it was the first mass-produced civilian four-wheel drive car with doors on it, and an available hard roof. Contrary to conventional car and truck chassis, it used a sturdier fully box-welded frame. Furthermore, due to post-war steel shortage, and aluminium surplus, Land Rovers received non-rusting aluminium alloy bodies, favouring their longevity. In 1992, Land Rover claimed that 70% of all the vehicles they had built were still in use.

Land Rover Perentie Nickname for the Land Rover 110

The Land Rover Perentie is a nickname for the Land Rover 110 produced by JRA Limited for the Australian Army, and part manufactured and assembled in Moorebank, New South Wales, during the 1980s and 1990s. There were two build contracts; the first was in 1988 and the second a decade later. The Perentie was based on the Land Rover Defender 110, and was introduced in 1987 to replace the ageing fleet of Series 2A and 3 Land Rovers. The Land Rover Perenties were produced in 4 x 4 and 6 x 6 variants and powered by an Isuzu 3.9-litre four-cylinder 4BD1 diesel engine or 4BD1-T turbo. They have proven themselves both in Australia and on operations overseas, including in Somalia, Timor Leste, the Solomon Islands, Iraq and Afghanistan.

Land Rover engines Motor vehicle engine

Engines used by the British company Land Rover in its 4×4 vehicles have included 4-cylinder petrol engines, and 4-cylinder and 5-cylinder diesel engines. In the 1960s and 1970s a 2.6 litre straight-six petrol engine of Rover design was available as a option in the long wheelbase versions.6-cylinder engines have been used for Land Rover vehicles built under licence. Land Rover has also used various 4-cylinder, V8 engines and V6 engines developed by other companies, but this article deals only with engines developed specifically for Land Rover vehicles.

Range Rover Series of 4x4 models from Land Rover

The Land Rover Range Rover is a 4x4 vehicle produced by Land Rover, a marque and sub-brand of Jaguar Land Rover, which is a subsidiary of Tata Motors. The Range Rover line was launched in 1970 by British Leyland. The model in its fourth generation. The Range Rover is generally considered to be a luxury vehicle.

Unimog 406 Motor vehicle

The Unimog 406 is a vehicle of the Unimog-series by Mercedes-Benz. A total of 37,069 units were manufactured by the Daimler-Benz AG in the Unimog plant in Gaggenau from 1963 to 1989. The 406 was the first medium duty Unimog, having a larger wheelbase of 2380 mm and more than twice the engine power of the Unimog 401. Unlike the initial Unimog, the 406 does not have a car engine but a heavy duty truck engine instead. Several following Unimog versions were based on the 406. There were eleven different types made of the Unimog 406, which were available in four models with a closed two-door or four-door cab, as Cabrio and as an OEM part. During its long production period, the 406 received several technical refinements. In 1964, the precombustion chamber diesel engine OM 312 was replaced with the direct injected OM 352. Disc brakes followed in 1973. For many enthusiasts, the Unimog 406 represents the classical Unimog, having agricultural and silvicultural applications. It was successful and the best embodiment of the word Universal-Motor-Gerät considering all prior Unimogs.

SAMIL 20 Truck Type of 2-ton 4x4 truck

The SAMIL 20 is a 2-ton cargo vehicle produced in South Africa in the mid 1980's and was used as at the primary light cargo carrier of the South African Defence Force. The vehicle design is based on the German Mercedes Unimog chassis and Mark I of this vehicle was based on the Magirus Deutz 130M7FAL 4x4 engine. In Mark II, the engine was replaced with a South African license built water cooled diesel engine. The vehicle is still in use within the South African National Defence Force.