Lean body mass

Last updated

Lean body mass (LBM), sometimes conflated with fat-free mass, is a component of body composition. Fat-free mass (FFM) is calculated by subtracting body fat weight from total body weight: total body weight is lean plus fat. In equations:

Contents

LBM = BW  BF
Lean body mass equals body weight minus body fat
LBM + BF = BW
Lean body mass plus body fat equals body weight

LBM differs from FFM in that cellular membranes are included in LBM although this is only a small percent difference in the body's mass (up to 3% in men and 5% in women) [1]

The percentage of total body mass that is lean is usually not quoted – it would typically be 60–90%. Instead, the body fat percentage, which is the complement, is computed, and is typically 10–40%. The lean body mass (LBM) has been described as an index superior to total body weight for prescribing proper levels of medications and for assessing metabolic disorders, as body fat is less relevant for metabolism. LBW is used by anesthesiologists to dose certain medications. For example, due to the concern of postoperative opioid-induced ventilatory depression in the obese patient, opioids are best based on lean body weight. The induction dose of propofol should also be based on LBW. [2]

Estimation

LBM is usually estimated using mathematical formulas. Several formulas exist, having different utility for different purposes. For example, the Boer formula is method of choice for LBM estimation to calculate the dose given in contrast CT in obese individuals with BMI between 35 and 40. [3]

A nomogram based on height, weight and arm circumference may be used. [4]

Boer

The Boer formula is: [3]

For men: LBM = (0.407 × W) + (0.267 × H) − 19.2

For women: LBM = (0.252 × W) + (0.473 × H) − 48.3

where W is body weight in kilograms and H is body height in centimeters.

Hume

The following formula by Hume may be used: [5]

For men: LBM = (0.32810 × W) + (0.33929 × H) − 29.5336

For women: LBM = (0.29569 × W) + (0.41813 × H) − 43.2933

where W is body weight in kilograms and H is body height in centimeters.

Actual measurement

Instead of mathematical estimation the actual value of LBM may be calculated using various technologies such as Dual-energy X-ray absorptiometry (DEXA).

Related Research Articles

<span class="mw-page-title-main">Body mass index</span> Relative weight based on mass and height

Body mass index (BMI) is a value derived from the mass (weight) and height of a person. The BMI is defined as the body mass divided by the square of the body height, and is expressed in units of kg/m2, resulting from mass in kilograms (kg) and height in metres (m).

<span class="mw-page-title-main">Abdominal obesity</span> Excess fat around the stomach and abdomen

Abdominal obesity, also known as central obesity and truncal obesity, is the human condition of an excessive concentration of visceral fat around the stomach and abdomen to such an extent that it is likely to harm its bearer's health. Abdominal obesity has been strongly linked to cardiovascular disease, Alzheimer's disease, and other metabolic and vascular diseases.

<span class="mw-page-title-main">Obesity</span> Medical condition in which excess body fat harms health

Obesity is a medical condition, sometimes considered a disease, in which excess body fat has accumulated to such an extent that it can potentially have negative affects on health. People are classified as obese when their body mass index (BMI)—a person's weight divided by the square of the person's height—is over 30 kg/m2; the range 25–30 kg/m2 is defined as overweight. Some East Asian countries use lower values to calculate obesity. Obesity is a major cause of disability and is correlated with various diseases and conditions, particularly cardiovascular diseases, type 2 diabetes, obstructive sleep apnea, certain types of cancer, and osteoarthritis.

Human body weight is a person's mass or weight.

Basal metabolic rate (BMR) is the rate of energy expenditure per unit time by endothermic animals at rest. It is reported in energy units per unit time ranging from watt (joule/second) to ml O2/min or joule per hour per kg body mass J/(h·kg). Proper measurement requires a strict set of criteria to be met. These criteria include being in a physically and psychologically undisturbed state and being in a thermally neutral environment while in the post-absorptive state (i.e., not actively digesting food). In bradymetabolic animals, such as fish and reptiles, the equivalent term standard metabolic rate (SMR) applies. It follows the same criteria as BMR, but requires the documentation of the temperature at which the metabolic rate was measured. This makes BMR a variant of standard metabolic rate measurement that excludes the temperature data, a practice that has led to problems in defining "standard" rates of metabolism for many mammals.

In physiology and medicine, the body surface area (BSA) is the measured or calculated surface area of a human body. For many clinical purposes, BSA is a better indicator of metabolic mass than body weight because it is less affected by abnormal adipose mass. Nevertheless, there have been several important critiques of the use of BSA in determining the dosage of medications with a narrow therapeutic index, such as chemotherapy.

<span class="mw-page-title-main">Waist–hip ratio</span>

The waist–hip ratio or waist-to-hip ratio (WHR) is the dimensionless ratio of the circumference of the waist to that of the hips. This is calculated as waist measurement divided by hip measurement. For example, a person with a 75 cm waist and 95 cm hips has WHR of about 0.79.

The body fat percentage (BFP) of a human or other living being is the total mass of fat divided by total body mass, multiplied by 100; body fat includes essential body fat and storage body fat. Essential body fat is necessary to maintain life and reproductive functions. The percentage of essential body fat for women is greater than that for men, due to the demands of childbearing and other hormonal functions. Storage body fat consists of fat accumulation in adipose tissue, part of which protects internal organs in the chest and abdomen. A number of methods are available for determining body fat percentage, such as measurement with calipers or through the use of bioelectrical impedance analysis.

In physical fitness, body composition refers to quantifying the different components of a human body. The selection of compartments varies by model but may include fat, bone, water, and muscle. Two people of the same gender, height, and body weight may have completely different body types as a consequence of having different body compositions. This may be explained by a person having low or high body fat, dense muscles, or big bones.

A protein-sparing modified fast or PSMF diet is a type of a very-low-calorie diet with a high proportion of protein calories and simultaneous restriction of carbohydrate and fat. It includes a protein component, fluids, and vitamin and mineral supplementation.

<span class="mw-page-title-main">Overweight</span> Above a weight considered healthy

Being overweight or fat is having more body fat than is optimally healthy. Being overweight is especially common where food supplies are plentiful and lifestyles are sedentary.

The Harris–Benedict equation is a method used to estimate an individual's basal metabolic rate (BMR).

<span class="mw-page-title-main">Classification of obesity</span> Overview of the classification of the condition of obesity

Obesity classification is a ranking of obesity, the medical condition in which excess body fat has accumulated to the extent that it has an adverse effect on health. The World Health Organization (WHO) classifies obesity by body mass index (BMI). BMI is further evaluated in terms of fat distribution via the waist–hip ratio and total cardiovascular risk factors. In children, a healthy weight varies with age and sex, and obesity determination is in relation to a historical normal group.

<span class="mw-page-title-main">Weight management</span> Techniques for maintaining body weight

Weight management refers to behaviors, techniques, and physiological processes that contribute to a person's ability to attain and maintain a healthy weight. Most weight management techniques encompass long-term lifestyle strategies that promote healthy eating and daily physical activity. Moreover, weight management involves developing meaningful ways to track weight over time and to identify ideal body weights for different individuals.

The body adiposity index (BAI) is a method of estimating the amount of body fat in humans. The BAI is calculated without using body weight, unlike the body mass index (BMI). Instead, it uses the size of the hips compared to the person's height.

A person's waist-to-height ratio (WHtR), occasionally written WtHR or called waist-to-stature ratio (WSR), is defined as their waist circumference divided by their height, both measured in the same units. It is used as a predictor of obesity-related cardiovascular disease. The WHtR is a measure of the distribution of body fat. Higher values of WHtR indicate higher risk of obesity-related cardiovascular diseases; it is correlated with abdominal obesity.

<span class="mw-page-title-main">Contrast CT</span>

Contrast CT, or contrast enhanced computed tomography (CECT), is X-ray computed tomography (CT) using radiocontrast. Radiocontrasts for X-ray CT are generally iodine-based types. This is useful to highlight structures such as blood vessels that otherwise would be difficult to delineate from their surroundings. Using contrast material can also help to obtain functional information about tissues. Often, images are taken both with and without radiocontrast. CT images are called precontrast or native-phase images before any radiocontrast has been administered, and postcontrast after radiocontrast administration.

<span class="mw-page-title-main">Body shape index</span> Human health index

A Body Shape Index (ABSI) or simply body shape index (BSI) is a metric for assessing the health implications of a given human body height, mass and waist circumference (WC). The inclusion of WC is believed to make the BSI a better indicator of risk of mortality from excess weight than the standard body mass index. ABSI correlates only slightly with height, weight and BMI, indicating that it is independent of other anthropometric variables in predicting mortality.

Juven is a medical food that is manufactured by Abbott Laboratories and used to provide nutritional support under the care of a physician in individuals with muscle wasting due to AIDS or cancer, to promote wound healing following surgery or injury, or when otherwise recommended by a medical professional. It is a powdered nutritional supplement that contains 3 grams of calcium β-hydroxy β-methylbutyrate, 14 grams of L-arginine, and 14 grams of L-glutamine per two daily servings.

Total intravenous anesthesia (TIVA) refers to the intravenous administration of anesthetic agents to induce a temporary loss of sensation or awareness. The first study of TIVA was done in 1872 using chloral hydrate, and the common anesthetic agent propofol was licensed in 1986. TIVA is currently employed in various procedures as an alternative technique of general anesthesia in order to improve post-operative recovery.

References

  1. Yu, S; Visvanathan, T; Field, J; Ward, LC; Chapman, I; Adams, R; Wittert, G; Visvanathan, R (14 October 2013). "Lean body mass: the development and validation of prediction equations in healthy adults". BMC Pharmacology & Toxicology. 14: 53. doi: 10.1186/2050-6511-14-53 . PMC   3833312 . PMID   24499708. LBM differs from FFM in that lipid in cellular membranes are included in LBM but this accounts for only a small fraction of total body weight (up to 3% in men and 5% in women)
  2. Stoelting's Anesthesia and Co-Existing Disease, 6th Edition. Pages 329-330.
  3. 1 2 Caruso, Damiano; De Santis, Domenico; Rivosecchi, Flaminia; Zerunian, Marta; Panvini, Nicola; Montesano, Marta; Biondi, Tommaso; Bellini, Davide; Rengo, Marco; Laghi, Andrea (13 August 2018). "Lean Body Weight-Tailored Iodinated Contrast Injection in Obese Patient: Boer versus James Formula". BioMed Research International . 2018: 8521893. doi: 10.1155/2018/8521893 . ISSN   2314-6133. PMC   6110034 . PMID   30186869.
  4. Fuchs, RJ; Theis, CF; Lancaster, MC (1 April 1978). "A nomogram to predict lean body mass in men". The American Journal of Clinical Nutrition . 31 (4): 673–8. doi:10.1093/ajcn/31.4.673. PMID   637039.
  5. Hume, R (Jul 1966). "Prediction of lean body mass from height and weight". Journal of Clinical Pathology . 19 (4): 389–91. doi:10.1136/jcp.19.4.389. PMC   473290 . PMID   5929341.