This is a list of FIPS 10-4 region codes from V-Z, using a standardized name format, and cross-linking to articles.
On September 2, 2008, FIPS 10-4 was one of ten standards withdrawn by NIST as a Federal Information Processing Standard. [1] The list here is the last version of codes. For earlier versions, see link below.
| FIPS Code | Region |
|---|---|
| WA21 | Khomas Region, Namibia |
| WA28 | Zambezi Region, Namibia |
| WA29 | Erongo Region, Namibia |
| WA30 | Hardap Region, Namibia |
| WA31 | ǁKaras Region, Namibia |
| WA32 | Kunene Region, Namibia |
| WA33 | Ohangwena Region, Namibia |
| WA34 | Okavango Region, Namibia |
| WA35 | Omaheke Region, Namibia |
| WA36 | Omusati Region, Namibia |
| WA37 | Oshana Region, Namibia |
| WA38 | Oshikoto Region, Namibia |
| WA39 | Otjozondjupa Region, Namibia |
| FIPS Code | Region |
|---|---|
| WS01 | A'ana District, Samoa |
| WS02 | Aiga-i-le-Tai District, Samoa |
| WS03 | Atua District, Samoa |
| WS04 | Fa'asaleleaga District, Samoa |
| WS05 | Gaga'emauga District, Samoa |
| WS06 | Va'a-o-Fonoti District, Samoa |
| WS07 | Gagaifomauga District, Samoa |
| WS08 | Palauli District, Samoa |
| WS09 | Satupa'itea District, Samoa |
| WS10 | Tuamasaga District, Samoa |
| WS11 | Vaisigano District, Samoa |
| FIPS Code | Region |
|---|---|
| WZ01 | Hhohho District, Eswatini |
| WZ02 | Lubombo District, Eswatini |
| WZ03 | Manzini District, Eswatini |
| WZ04 | Shiselweni District, Eswatini |
| FIPS Code | Region |
|---|---|
| YM01 | Abyan Governorate, Yemen |
| YM02 | Adan Governorate, Yemen |
| YM03 | Al Mahrah Governorate, Yemen |
| YM04 | Ḩaḑramawt Governorate, Yemen |
| YM05 | Shabwah Governorate, Yemen |
| YM08 | Al Ḩudaydah Governorate, Yemen |
| YM10 | Al Mahwit Governorate, Yemen |
| YM11 | Dhamar Governorate, Yemen |
| YM14 | Ma'rib Governorate, Yemen |
| YM15 | Sa'dah Governorate, Yemen |
| YM16 | San‘a’ Governorate, Yemen |
| YM18 | Ad Dali' Governorate, Yemen |
| YM19 | 'Amran Governorate, Yemen |
| YM20 | Al Bayḑā' Governorate, Yemen |
| YM21 | Al Jawf Governorate, Yemen |
| YM22 | Hajjah Governorate, Yemen |
| YM23 | Ibb Governorate, Yemen |
| YM24 | Lahij Governorate, Yemen |
| YM25 | Ta'izz Governorate, Yemen |
| FIPS Code | Region |
|---|---|
| ZA01 | Western Province, Zambia |
| ZA02 | Central Province, Zambia |
| ZA03 | Eastern Province, Zambia |
| ZA04 | Luapula Province, Zambia |
| ZA05 | Northern Province, Zambia |
| ZA06 | North-Western Province, Zambia |
| ZA07 | Southern Province, Zambia |
| ZA08 | Copperbelt Province, Zambia |
| ZA09 | Lusaka Province, Zambia |
| FIPS Code | Region |
|---|---|
| ZI01 | Manicaland Province, Zimbabwe |
| ZI02 | Midlands Province, Zimbabwe |
| ZI03 | Mashonaland Central Province, Zimbabwe |
| ZI04 | Mashonaland East Province, Zimbabwe |
| ZI05 | Mashonaland West Province, Zimbabwe |
| ZI06 | Matabeleland North Province, Zimbabwe |
| ZI07 | Matabeleland South Province, Zimbabwe |
| ZI08 | Masvingo Province, Zimbabwe |
| ZI09 | Bulawayo Province, Zimbabwe |
| ZI10 | Harare Province, Zimbabwe |
A country code is a short alphanumeric identification code for countries and dependent areas. Its primary use is in data processing and communications. Several identification systems have been developed.
The Federal Information Processing Standards (FIPS) of the United States are a set of publicly announced standards that the National Institute of Standards and Technology (NIST) has developed for use in computer situs of non-military United States government agencies and contractors. FIPS standards establish requirements for ensuring computer security and interoperability, and are intended for cases in which suitable industry standards do not already exist. AIR FIPS specifications are modified versions of standards the technical communities use, such as the American National Standards Institute (ANSI), the Institute of Electrical and Electronics Engineers (IEEE), and the International Organization for Standardization (ISO).
FIPS state codes were numeric and two-letter alphabetic codes defined in U.S. Federal Information Processing Standard Publication 5-2 to identify U.S. states and certain other associated areas. The standard superseded FIPS PUB 5-1 on May 28, 1987, and was superseded on September 2, 2008, by ANSI standard INCITS 38:2009.
ISO 3166-2:VE is the entry for Venezuela in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions of all countries coded in ISO 3166-1.
ISO 3166-2:YE is the entry for Yemen in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions of all countries coded in ISO 3166-1.
ISO 3166-2:DO is the entry for the Dominican Republic in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions of all countries coded in ISO 3166-1.
The FIPS 10-4 standard, Countries, Dependencies, Areas of Special Sovereignty, and Their Principal Administrative Divisions, was a list of two-letter country codes that were used by the U.S. Government for geographical data processing in many publications, such as the CIA World Factbook. The standard was also known as DAFIF 0413 ed 7 Amdt. No. 3 and as DIA 65-18.
ISO 3166-2:DK is the entry for Denmark in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions of all countries coded in ISO 3166-1.
ISO 3166-2:HT is the entry for Haiti in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions of all countries coded in ISO 3166-1.
ISO 3166-2:LC is the entry for Saint Lucia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions of all countries coded in ISO 3166-1.
The Nomenclature of Territorial Units for Statistics (NUTS) is a geocode standard for referencing the subdivisions of Germany for statistical purposes. The standard is developed and regulated by the European Union. The NUTS standard is instrumental in delivering the European Union's Structural Funds. The NUTS code for Germany is DE and a hierarchy of three levels is established by Eurostat. Below these is a further levels of geographic organisation – the local administrative unit (LAU). In Germany the LAUs 1 is collective municipalities, and the LAU 2 is municipalities.