This article needs additional citations for verification .(January 2016) |
TGV accidents are events involving TGV trains which have harmful consequences, such as injury to people or damage to trains, or derailments. High-speed rail is one of the safest modes of transportation; since service started in 1964, there have only been fatalities in high-speed operation in a 2015 derailment. Today TGV trains accumulate of the order of 50 billion passenger-kilometres per year on lignes à grande vitesse (high-speed lines) alone. 1.2 billion passengers have travelled on the TGV.
TGV operations fall into two categories: operations on dedicated, TGV-only high-speed lines (LGVs), and operation in mixed traffic on lignes classiques, conventional lines. Indeed, of the total track length served by TGV trains only about 25% (by route kilometre) is high-speed. In understanding the incident summaries below, it is important to bear this distinction in mind. Most of the serious incidents have occurred on conventional lines, where TGV trains are exposed to the same external risks as any other train. High-speed operation was never a factor in any fatal incident in the history of the TGV until November 14, 2015 when a TGV testing on the new Paris-Strasbourg line derailed violently into a canal, killing eleven and injuring the surviving 42 passengers.
Following the number of accidents at level crossings, an effort has been made to remove all level crossings on lignes classiques used by TGVs. The ligne classique from Tours to Bordeaux at the end of the LGV Atlantique has no level crossings as a result.
The summaries below are not comprehensive. Most of the "major" incidents are described, but there have been others:
The list above together with the summaries below form a complete history of major TGV incidents up to 5 January 2001.
Trainset involved: Sud-Est, unknown
Service: Marseille to Paris
Location: Near Tain-l'Hermitage, south of Lyon in the Rhône Valley
Injuries: 2 people died in the bombing of the TGV.
The bomb was placed in a luggage rack in a trailer vestibule. It exploded at about the same time as another bomb which was placed in a baggage locker in the Marseille St-Charles station. The toll from both bombs totalled 5 dead and 50 injured. Both bombs were the work of the infamous terrorist Carlos the Jackal.
Trainset involved: 70 (Sud-Est)
Service: train 736, Grenoble to Paris
Location: PN 74, Voiron
Injuries: 2 dead, 60 injured
A special road transport with a weight of 80 tons became stranded on level crossing 74. Train 736, rounding a curve toward the crossing, ploughed into it at 110 km/h (68 mph). The large mass of the road vehicle made this crash much worse than it might otherwise have been; the engineer and one passenger died, and many more were injured when the first trailer was ripped open by debris. Only the leading power unit derailed. This wreck, the most violent to date, became a reference for the design and crash testing of safety features for the next generation of TGV, as embodied by today's Duplex trainsets. These newer trains have several deformable sections, at the front and rear of the power unit and at the front of the first trailer, to manage and absorb crash energy without damage to passenger compartments. Trainset 70 was never returned to service, and the trailing unit 23140 became a spare in the Sud-Est fleet.
Trainset involved: Sud-Est, unknown
Service: train 920, Annecy to Paris
Location: Mâcon-Loché TGV station, kilometre post 334, LGV Sud-Est high speed line
Injuries: 27, slight
The accident trainset had been involved in an emergency stop previously, which resulted in a significant wheel flat. At 0733, the flat spot caused one bogie of the trainset to derail as it passed through the Mâcon-Loché station at 270 km/h (170 mph). Projections of ballast stones caused injuries to people standing on the station platform waiting for train 970. The train came to a stop safely.
Trainset involved: 511 (Réseau)
Service: train 7150, Valenciennes to Paris
Location: TGV Haute-Picardie station, kilometre post 110.5, LGV Nord (Paris-Lille) high speed line
Injuries: 1, slight
The incident set a record for the world's fastest derailment. It occurred before the TGV Haute Picardie station was built, near the southern end of where the platforms are located today. After a period of heavy rains, a large sink hole opened under track 2 (southbound). Two trains had already passed this spot and detected no anomaly as late as 10 minutes before the accident. At 0706, TGV 7150 was bearing down at 294 km/h (183 mph) on a muddy hole 7 by 4 metres (23 ft × 13 ft) and 1.5 metres (4 ft 11 in) deep, bridged by a section of unsupported track. The engineer felt a slight bump and made a service brake application. The last four trailers and the rear power unit derailed, and the train came to a rocky stop over a distance of 2.3 kilometres (1.4 mi) (somewhat less than it takes for a conventional emergency stop). It was fortunate that the train did not jackknife or leave the track bed; this is credited in part to the stiffness that the articulated design lends to the train. Only one passenger was injured, and another treated for shock. The sinkhole was traced to unstable terrain beneath the track bed, possibly caused by galleries and trenches from World War I. How closely a disaster was averted is a matter of debate; however, the trackbed has since been carefully inspected to prevent similar occurrences in the future.
Trainset involved: 394 (Atlantique)
Service: train 8737, Paris to Brest
Location: Near Vitré, kilometre post 342, PN 172 level crossing with road D34
Injuries: 2, slight
A tractor-trailer combination with farm equipment became stuck on the level crossing in a relatively tight, canted curve of the Paris-Brest line. The automatic crossing gates came down and the train, approaching at 140 km/h (87 mph), hit the unoccupied vehicle. The train did not derail and came to a stop about 1.6 km (0.99 mi) after the impact following an emergency brake application. Damage was limited to the nose of trainset 394, as well as a catenary mast and level crossing gates.
Trainset involved: 502 (Réseau)
Service: train 7119, Paris to Dunkerque
Location: Bierne, 10 km (6.2 mi) south of Dunkerque
Injuries: 7, slight
An asphalt paving machine became stranded on a level crossing near Bergues. TGV 7119, running 80 minutes late because of a strike, hit the machine at 130 km/h (81 mph). The leading power unit left the rails, spun around to the left, and came to rest on its side down the track embankment. The engineer suffered minor injuries, and the unit was destroyed. Four trailers derailed and two left the track bed. None of them rolled over thanks to the articulated design of the train; very few passengers were injured.
Trainset 502 was withdrawn from service and stored. The trailing power unit serves as a spare, and trailers R1 and R2 may be used to repair Thalys 4345, involved in the May 1998 level crossing collision.
Trainset involved: 15 (or 45?)(dunno) (Sud-Est)
Service: train 644, Lyon to Paris
Location: near Montchanin, LGV Sud-Est high speed line
Injuries: none
The train developed a fire in the engine compartment. An emergency stop was performed, and fire services began extinguishing the blaze a half hour later. The fire was confined to the leading power unit of the double trainset formation. The unit involved was a recently renovated Sud-Est set, although it is unknown if this was a factor. The 621 passengers were transferred to another trainset and experienced a five-hour delay.
Trainset involved: Atlantique, unknown
Service: Brest to Paris, unknown
Location: D140 road at Neau, near Laval
Injuries: 6, slight
A tractor-trailer combination carrying a load of calcium carbonate became disabled on a level crossing. The driver was able to escape from the vehicle before the train hit it at 140 km/h (87 mph), derailing one bogie and damaging tracks and catenary.
Trainset involved: 4345 (Thalys PBKA)
Service: train 9344, Amsterdam to Paris
Location: near Hoeven, southern Netherlands
Injuries: 1 dead, 6 slight injuries
A truck attempted to cross the tracks at an unprotected level crossing when the train arrived. The truck driver was killed in the impact and the train's power unit and first two trailers derailed. The trainset was heavily damaged. Six passengers were injured and tracks and catenary were damaged in the incident. Trailers R1 and R2 had to be scrapped. The trainset was later repaired with the R1 and R2 trailers from TGV trainset 502, involved in the 25 September 1997 accident.
Trainset involved: Atlantique, unknown
Service: unknown, Brest to Paris
Location: level crossing 303, near Guipavas (29)
Injuries: none
On a day when rail workers were on strike, a double TGV trainset that had left Brest at 0854 struck a stranded semi-truck/lorry just 8 minutes into its journey near Guipavas. The 23‑year‑old driver of the truck jumped out of the way and escaped uninjured after losing his way and getting stuck on the crossing while attempting to turn around. Travelling at less than 120 km/h (75 mph) the TGV struck and destroyed the vehicle, throwing debris onto a waiting car whose occupant also escaped unharmed. The lead power unit sustained heavy damage.
Trainset involved: Eurostar 3101/3102
Service: 9047, Paris - London
Location: LGV Nord-Europe, near Croisilles (10 km (6.2 mi) south of Arras)
Injuries: 14, slight
Belgian trainset 3101-3102 was covering Eurostar 9047 (Paris to London), travelling northbound on track 1 of the LGV Nord high speed line at 300 km/h (190 mph) with 501 passengers on board. The engineer detected an anomalous vibration and reduced speed to 200 km/h (120 mph), before resuming full speed a short time afterwards. At 1754 local time as the trainset passed 290 km/h (180 mph) near the village of Croisilles, 14 km (8.7 mi) south of Arras, at the level of the track switch for the branch line to Arras, a transmission assembly failed. A reaction link on the rear bogie of the leading power car became separated from the bogie frame, leading to catastrophic failure of the transmission assembly with parts falling onto the track. The failure and ensuing emergency stop caused the failed bogie 2 (numbered from the front), bogie 3 and bogie 23 on the trailing power car to leave the rails. The partly derailed train came to a stop safely 1500 m further, causing some damage to the track. 14 people including the British engineer were treated for light injuries or shock, and passengers resumed their trip to London on buses. Once again, as in the 1993 TGV derailment, the articulated trainset architecture was credited with maintaining stability and integrity of the train as it came to a stop. How closely disaster was averted is again debatable. The train remained mostly aligned on the trackbed, thanks to construction and low centre of gravity. [1]
Trainset involved: Atlantique, unknown
Service: 8720, Brest - Paris
Location: Ligne classique near Laval (Mayenne)
Injuries: none.
Following a winter storm, a mudslide covered the tracks. The engineer/driver of the 0649 TGV out of Brest, headed for Paris, saw the slide about 300 m ahead and was able to slow to 120 km/h (75 mph) before hitting the mud. A minor derailment of the power car ensued due to the emergency stop.
Trainset involved: unknown
Service: unknown, Dunkerque to Paris
Location: level crossing in Esquelbecq (59)
Injuries: 1, slight
Travelling at 106 km/h (66 mph), the train collided with a heavy goods vehicle stuck on the level crossing at Esquelbecq in northern France. The front power car was severely damaged, but only one bogie derailed. The train driver was slightly injured.
Trainset involved: Sud-Est, 46
Service: unknown, Paris to Geneva
Location: level crossing near Tossiat (01)
Injuries: 1 dead, 1 serious injury, 24 slight injuries
Travelling at about 100 km/h (62 mph), the train collided with a truck which had stopped on the crossing as it could not fit under the overhead wires. The train derailed and the front power car (23139) was severely damaged and later written off. The truck driver was killed, and on the train there were one seriously injured and 24 slightly injured.
Trains involved: TGV Atlantique, Z 7300 (TER n°867285)
Service: 8585, Tarbes to Paris, on the Pau-Bayonne line
Location: Near Denguin
Injuries: 40 (4 seriously)
A regional express train (train express regional TER) crashed at 90 km/h (56 mph) into the rear-end of a TGV train which was moving at 30 km/h (19 mph) in the same direction ahead of it, due to a faulty signal. [2]
Train involved: High speed TGV.
Service: testing new Paris-Strasbourg line not yet in passenger service. [3] [4]
Location: Eckwersheim, on the LGV Est high-speed rail line
Casualties: 11 dead, 42 injured.
Cause initially reported as excessive speed.
The TGV is France's intercity high-speed rail service, operated mainly by SNCF. SNCF worked on a high-speed rail network from 1966 to 1974 and presented the project to President Georges Pompidou who approved it. Originally designed as turbotrains to be powered by gas turbines, TGV prototypes evolved into electric trains with the 1973 oil crisis. In 1976 the SNCF ordered 87 high-speed trains from Alstom. Following the inaugural service between Paris and Lyon in 1981 on the LGV Sud-Est, the network, centred on Paris, has expanded to connect major cities across France and in neighbouring countries on a combination of high-speed and conventional lines. The TGV network in France carries about 110 million passengers a year.
Intercity Express is a high-speed rail system in Germany. It also serves destinations in Austria, France, Belgium, Switzerland and the Netherlands as part of cross-border services. It is the flagship of the German state railway, Deutsche Bahn. ICE fares are fixed for station-to-station connections, on the grounds that the trains have a higher level of comfort. Travelling at speeds up to 300 km/h (190 mph) within Germany and 320 km/h (200 mph) when in France, they are aimed at business travellers and long-distance commuters and marketed by Deutsche Bahn as an alternative to flights.
The Ligne à Grande Vitesse Nord, typically shortened to LGV Nord, is a French 333-kilometre (207 mi)-long high-speed rail line, opened in 1993, that connects Paris to the Belgian border and the Channel Tunnel via Lille.
The TGV Atlantique (TGV-A) is a class of high-speed trains used in France by SNCF; they were built by Alstom between 1988 and 1992, and were the second generation of TGV trains, following on from the TGV Sud-Est trainsets. The trains were named after the Ligne à Grande Vitesse Atlantique that they were originally built for.
The TGV La Poste were dedicated trainsets for high-speed freight and mail transportation by French railway company SNCF on behalf of the French postal carrier La Poste. The top speed of this TGV Sud-Est derivate was 270 km/h (168 mph), making them the fastest freight trains in the world. They were withdrawn in 2015.
The Ligne à Grande Vitesse Est européenne, typically shortened to LGV Est, is a French high-speed rail line that connects Vaires-sur-Marne and Vendenheim. The line halved the travel time between Paris and Strasbourg and provides fast services between Paris and the principal cities of Eastern France as well as Luxembourg and Germany. The LGV Est is a segment of the Main Line for Europe project to connect Paris with Budapest with high-speed rail service.
The AGV is a standard gauge, high-speed, electric multiple-unit train designed and built by Alstom.
The SNCF TGV Sud-Est was a French high speed TGV train built by Alstom and Francorail-MTE and operated by SNCF, the French national railway company. A total of 111 trainsets were built between 1978 and 1988 for the first TGV service in France between Paris and Lyon which opened in 1981. The trainsets were semi-permanently coupled, consisting of two power cars (locomotives) and eight articulated passenger carriages, ten in the case of the tri-voltage sets. The trains were named after the Ligne à Grande Vitesse Sud-Est that they first operated on. They were also referred to as TGV-PSE, an abbreviation of Paris Sud-Est.
The LGV Sud-Est is a French high-speed rail line which connects the Paris and Lyon areas. It was France's first high-speed rail line, it has also been the most widely used line in France as well as being the busiest high-speed line in Europe.
The TGV POS is a TGV train built by French manufacturer Alstom which is operated by the French national rail company, the SNCF, in France's high-speed rail lines. It was originally ordered by the SNCF for use on the LGV Est, which was put into service in 2007. POS is an abbreviation of Paris-Ostfrankreich-Süddeutschland, the route of the LGV Est.
The TGV Duplex is a French high-speed train of the TGV family, manufactured by Alstom, and operated by the French national railway company SNCF. They were the first TGV trainsets to use bi-level passenger carriages with a seating capacity of 508 passengers, increasing capacity on busy high-speed lines. While the TGV Duplex started as a small component of the TGV fleet, it has become one of the system's workhorses.
The TGV is France's high-speed rail service. The idea of a high-speed train in France was born about twenty years before the first TGVs entered service. At that time, about 1960, a radical new concept was thought up; combining very high speeds and steep grades would allow a railway to follow the contours of existing terrain, like a gentle roller coaster. Instead of one or two percent grades which would be considered steep in normal applications, grades up to four percent would be feasible, thus allowing more flexible routing of new lines. Over the next several years, this very general idea gave rise to a variety of high speed transportation concepts, which tended to move away from conventional "wheel on rail" vehicles. Indeed, the French government at the time favoured more "modern" air-cushioned or maglev trains, such as Bertin's Aérotrain; Steel wheel on rail was considered a dead-end technology. Simultaneously, SNCF was trying to raise the speeds of conventional trains into the range 180 to 200 km/h for non-electrified sections, by using gas turbines for propulsion. Energy was reasonably cheap in those years, and gas turbines were a compact and efficient way to fulfil requirements for more power. Following on the TGS prototype in 1967, SNCF introduced gas turbine propulsion with the ETG turbotrains in Paris - Cherbourg service, in March 1970.
The TGV holds a series of land speed records for rail vehicles achieved by SNCF, the French national railway, and its industrial partners. The high-speed trials are intended to expand the limits of high-speed rail technology, increasing speed and comfort without compromising safety.
The SNCF class BB 15000 is a class of 25 kV 50 Hz electric locomotives built by Alstom and MTE between 1971 and 1978. Initially 65 locomotives strong, the class was widely deployed on the whole French 25 kV network before being replaced by TGV trains when the LGV Est went into service in 2007.
Operation V150, where 150 refers to a target speed in metres per second, was a series of high-speed trials carried out on the LGV Est. The V150 was a specially configured TGV high-speed train notable for breaking the world railway speed record on 3 April 2007. The train was built in France and reached a speed of 574.8 kilometres per hour (357.2 mph) on an unopened section of the LGV Est between Strasbourg and Paris, in France topping the previous record of 515.3 kilometres per hour (320.2 mph) set in 1990.
France has a large network of high-speed rail lines. As of June 2021, the French high-speed rail network comprises 2,800 km (1,740 mi) of tracks, making it one of the largest in Europe and the world. As of early 2023, new lines are being constructed or planned. The first French high-speed railway, the LGV Sud-Est, linking the suburbs of Paris and Lyon, opened in 1981 and was at that time the only high-speed rail line in Europe.
Avelia Euroduplex, more commonly known as just Euroduplex or TGV 2N2 in France, is a high-speed double-decker train manufactured by Alstom. It is primarily operated by the French national railway company SNCF, and also in operation with the Moroccan national railway company ONCF. It is the 3rd generation of the TGV Duplex.
On 14 November 2015, a TGV train derailed in Eckwersheim, Alsace, France, while performing commissioning trials on the second phase of the LGV Est high-speed rail line, which was scheduled to open for commercial service five months later. The derailment resulted in 11 deaths and 42 injuries. It was the first fatal derailment in the history of the TGV and the third derailment since the TGV entered commercial service in 1981.
The Ingenheim derailment occurred on 5 March 2020 when a TGV train derailed near Ingenheim, Bas-Rhin, Grand Est, France, on the LGV Est rail line due to a landslip. Twenty-one of the 348 passengers on board were injured, along with the driver.