Lloyd 300

Last updated
Lloyd 300
2007-09-08 2636 Lloyd 300, Modell 1950-1951 (ret).jpg
Lloyd LP300
Overview
Manufacturer Carl F. W. Borgward GmbH
Production18,087
Body and chassis
Body style 2-door saloon
coupé
Kombi
Panel van
Layout FF layout
Doors Suicide doors
Powertrain
Engine 293 cc two-stroke 2-cylinder
(parallel twin)
13 PS (HP): 9.6 kW
The windows in the rear-hinged doors slid open horizontally. The luggage locker had to be accessed from inside. 2007-09-08 2636 Lloyd 300 (Heck), Modell 1950-51 (ret).jpg
The windows in the rear-hinged doors slid open horizontally. The luggage locker had to be accessed from inside.

The Lloyd 300 was a small car produced by the Borgward Group's Lloyd Motoren Werke GmbH (Lloyd Motor Works) in Bremen between 1950 and 1952. [1]

Contents

The full name of the Lloyd 300 featured a two letter prefix that identified the body shape. The Lloyd LP300 (saloon; some say "LP" signifies Limousine-Personenwagen, but others quote it as Lloyd Personenwagen which is more consistent with the names for the other bodystyles) was released in May 1950, while the LC300 (Lloyd Coupé) and LS300 (Lloyd Stationswagen / estate) followed early in 1951. There was also a panel van version, the LK (Lloyd Kastenwagen).

Engine and running gear

Power was delivered to the front wheels from a transversely mounted air-cooled twin cylinder two-stroke engine with a horizontal-flow Solex 30 BFRH carburetor. [2] The engine capacity of 293cc provided for a maximum power output of 10 PS (7.4 kW) at 4,000 rpm. The top speed listed was 75 km/h (47 mph). [2] The car was fueled using "regular" grade petrol/gasoline, mixed in the ratio of 25:1 with oil, [2] reflecting the requirements of the "motorbike-style" two-stroke engine. When driven normally the Lloyd 300 consumed fuel significantly more frugally than West Germany's best selling small car, the Volkswagen. [2] Space was at a premium and the 18-litre fuel tank was accommodated ahead of the bulkhead underneath the front hood/bonnet in a space shared with the engine and the six-volt battery. Power was fed to the front wheels via a three-speed manual gear box (without synchromesh). [2]

Borgward had contracted out the development of the engine and transmission package to a firm called "INKA" (Ingenieurs- und Konstruktionsarbeitsgemeinschaft) in Hude. The INKA engineers had previously been employed by Auto Union, the Zwickau based conglomerate that had produced a succession of technically innovative and commercially successful DKW branded small cars during the 1930s, and the similarities between the basic architecture and technical solutions employed by the Lloyd 300 and those of the prewar DKW F8 was impossible to miss. From the driver's seat, it was clear that no attempt had been made to conceal the way that details such as the gear lever and dashboard layout had been modelled on earlier DKW designs. [3]

Steering, suspension and brakes

The steering employed a rack and pinion mechanism which was conventional at the time. It required 2¼ turns between opposite locks: the turning circle was 11 m (36 ft). The front wheels were suspended independently by two laterally mounted leaf springs. At the back there was a swing axle with semi-elliptical longitudinally configured leaf springs. [2] From January 1952 it was possible to order the Lloyd 300 with shock absorbers, for a supplement of DM 70.

The brakes were applied with a cable linkage. The mechanical handbrake worked on all four wheels. [2]

Chassis and body

Lloyd LS 300 (Stationswagen) Lloyd LS 300 1951-1952 schrag 2.JPG
Lloyd LS 300 (Stationswagen)

The compact four-seater body was mounted on a tubular steel chassis with cross members and a platform of sheet steel. It consisted of a timber and plywood frame with an outer skin of synthetic leather. This avoided the need to use steel body panels which would have necessitated investment in heavy presses and complex dies with a high capital cost, and it reflected the acute steel shortage across western Europe at the time. According to one source the synthetic leather skin sometimes concealed a multitude of imperfections in the construction of the timber frame. [3] Timber frame construction, which built on skills developed in nineteenth century carriage manufacturing, had been common in the 1920s, and manufacturers of small inexpensive cars not wishing to invest in costly presses and dies for stamping out steel body panels, notably DKW, had persisted with the technique and refined it through the 1930s. By the 1950s, however, some thought it anachronistic and the Lloyd 300 quickly acquired the soubriquet "Leukoplastbomber", [4] an essentially untranslatable term referring to its "cute" shape and the "plasticky" character of the car's synthetic leather skin. [1] Leukoplast is a brand of surgical tape; it was commonly used for quick repairs before duct tape became available and was allegedly suitable to repair the Lloyd 300.

The doors were hinged on the rear edge which facilitated access and egress. The windows in the doors slid open horizontally which avoided the need for costly and bulky winder mechanisms in the doors of what was, even by the standards of the time, a narrow car. The hood/bonnet lid was considered very narrow, and was broadened at the end of 1951. There was no opening hatch for the luggage locker at the back of the car, which instead had to be accessed by reaching behind the back seat.

Commercial

By the end of 1952, when the Lloyd 300 made way for the Lloyd 400, 18,087 of the earlier cars had been produced. Production peaked in 1952 with 9,981 Lloyds produced. Nevertheless, by this time the West German small car market was dominated by Volkswagen who in 1952 produced 114,348 Volkswagen "Beetles". [5]

When it was launched, in May 1950, the Lloyd came with an advertised price of DM 3,334, [2] which was very much less than the DM 4,600 advertised price for a Beetle. Both cars were small, cramped and slow, but for most purposes the Lloyd 300 was a class smaller than the Beetle. Nevertheless, by 1952 the price for a Beetle had come down to DM 4,400 while the price of a Lloyd 300 was increased to DM 3,664 in February 1952. The Lloyd 300 was replaced at the start of 1953 by the broadly similar Lloyd 400, itself replaced by the more powerful but otherwise broadly similar Lloyd 600 in 1955. [2] As the 1950 progressed the economies of scale available to Volkswagen from their higher production volumes enabled the company to reduce the price of the Beetle further, and the price differential between the little Lloyds and the Volkswagen eroded further year by year. [2] [5]

Related Research Articles

<span class="mw-page-title-main">Borgward</span> German automobile manufacturer

The former Borgward car manufacturing company, based in Bremen, Germany, was founded by Carl F. W. Borgward (1890–1963). It produced cars of four brands, which were sold to a diversified international customer base: Borgward, Hansa, Goliath and Lloyd. Borgward's Isabella was one of the most popular German premium models in the 1950s, while Lloyd's Alexander / Lloyd 600 model offered affordable mobility to many working-class motorists. The group ceased operations in 1961, following controversial insolvency proceedings.

<span class="mw-page-title-main">Mercedes-Benz W189</span> Motor vehicle

The Mercedes-Benz W189 model 300 was a four-door luxury tourer produced by Mercedes-Benz between 1957 and 1962. It was the company's flagship model at the time, equivalent to the modern S-Class and Maybach.

<span class="mw-page-title-main">Mercedes-Benz W186</span> Motor vehicle

The Mercedes-Benz W186 Model 300 was a four-door luxury sedan produced by Mercedes-Benz between 1951 and 1957. It was the company's flagship model at the time, succeeding the World War II era W150. Three versions were produced in succession, known informally as the 300a, 300b, and 300c. An enlarged "300d" variant built on the W189 chassis succeeded it in late 1957.

<span class="mw-page-title-main">Borgward Isabella</span> Motor vehicle

The Borgward Isabella is an automobile which was manufactured by the Bremen based auto-manufacturer Carl F. W. Borgward GmbH from 1954 to 1962.

<span class="mw-page-title-main">Goliath GP700</span> German automobile made 1950-1957

The Goliath GP700 is a small automobile which was manufactured by the Bremen, Germany–based Borgward subsidiary Goliath-Werke Borgward & Co from 1950 to 1957. In 1955, the GP700 was joined by the larger-engined Goliath GP900 E. From 1951 to 1953, a coupé version, the Goliath GP700 Sport was offered. The Goliath was a revolutionary design, which in several important respects pointed the way for automobile development in the second half of the 20th century.

<span class="mw-page-title-main">DKW F89</span> Motor vehicle

The DKW Meisterklasse, also known as the DKW F89, is a compact front-wheel drive saloon manufactured by Auto Union GmbH between 1950 and 1954. It was the first passenger car to be manufactured by the new Auto Union company in West Germany following the re-establishment of the business in the west in 1949.

<span class="mw-page-title-main">DKW F8</span> Motor vehicle

The DKW F8 is a compact front-wheel drive two-stroke engined saloon, introduced in 1939. The F8 was slightly shorter than its predecessor despite having a marginally increased wheelbase. The base model, known as the Reichsklasse, was manufactured only till 1940 but the Meisterklasse sedan continued in production until 1942. In addition to the saloons, cabriolet versions were offered.

<span class="mw-page-title-main">DKW Junior</span> Motor vehicle

The DKW Junior is a small front wheel drive saloon manufactured by Auto Union AG. The car received a positive reaction when first exhibited, initially badged as the DKW 600, at the Frankfurt Motor Show in March 1957. The ‘Junior’ name was given to the DKW 750 in 1959 when the car went into volume production, but failed to survive an upgrade in January 1963, after which the car was known as the DKW F12. In addition to the saloon, a pretty ‘F12 Roadster’ was produced in limited numbers.

<span class="mw-page-title-main">DKW Typ P</span> Motor vehicle

The DKW Typ P was the first motor car made by DKW. It was a light-weight design with a unit body made of wood and imitation leather. It was powered by a two stroke inline twin engine.

<span class="mw-page-title-main">Ford Taunus P1</span> Motor vehicle

The Ford Taunus P1 is a small family car which was produced by Ford Germany from 1952 until 1962. It was marketed as the Ford Taunus 12M, and, between 1955 and 1959, as the larger-engined Ford Taunus 15M. The company produced a succession of Ford Taunus 12M models until 1970, as the name was applied to a succession of similarly sized cars, but the first Taunus 12M models, based on the company's Taunus Project 1 (P1), remained in production only until 1962. In that year the Taunus P1 series was replaced by the Taunus P4 series.

<span class="mw-page-title-main">DKW F1</span> Motor vehicle

The DKW F1 was a small car produced by DKW between 1931 and 1932. It was launched at the Berlin Motor Show in February 1931.

<span class="mw-page-title-main">Goliath Pionier</span> Motor vehicle

The Goliath Pionier is a small three-wheeled two-seater vehicle first presented by Carl F. W. Borgward at the 1931 Berlin motor show. It remained in production until 1934, by when approximately 4,000 had been produced.

<span class="mw-page-title-main">DKW F2</span> Motor vehicle

The DKW F2, firstly marketed as "DKW Meisterklasse", is a front wheel drive economy car produced by Auto Union's DKW division from 1932 to 1935 at the company’s Zwickau plant. It was launched at the Berlin Motor Show in April 1932. It shared its 584cc engine and drivetrain with its DKW F1 predecessor, but offered a longer wheelbase and a larger body.

<span class="mw-page-title-main">DKW Typ 4=8</span> Motor vehicle

The DKW Typ 4=8 is a small rear-wheel drive two-stroke V4 engined car produced at the company's Spandau plant by DKW. It was launched at the Berlin Motor-show in 1929 as a successor to the DKW Typ P built at the same factory, although the DKW Typ P 4=8 was significantly larger than the Typ P: in terms of market positioning a more direct successor to the DKW Type P was probably the DKW F1 produced in Zwickau from 1931.

<span class="mw-page-title-main">Adler Trumpf Junior</span> Motor vehicle

The Adler Trumpf Junior is a small family car introduced by the Frankfurt based auto-maker Adler, early in 1934. Trumpf Junior was conceived as a similar but smaller version of the Adler Trumpf, which had already been available for two years. It intended to broaden the range and claim a share of a growing market which DKW were creating with their F1 model, and its successors, for small inexpensive front wheel drive cars.

<span class="mw-page-title-main">Porsche Type 12</span> Motor vehicle

The Porsche Type 12 was a German project to develop an "Everyman's automobile" for Zündapp. Fritz Neumeyer, then owner of Zündapp, ordered Ferdinand Porsche to design and build the prototype in 1931. Eventually, two saloons, and one drophead coupé were built. All of those cars were lost during World War II, the last one in a bombing raid in Stuttgart in 1945. The Type 12 is considered an important early step in the development of the original Volkswagen. A replica of the Type 12 is on static display at the Museum Industrielkultur in Nürnberg.

<span class="mw-page-title-main">Lloyd 600</span> Motor vehicle

The Lloyd 600 is a small car produced by the Borgward Groups's Lloyd Motoren Werke GmbH in Bremen between 1955 and 1961.

<span class="mw-page-title-main">Lloyd Arabella</span> Motor vehicle

The Lloyd Arabella was a passenger car produced by the Borgward Group in West Germany between 1959 and 1961. After the company's controversial bankruptcy the Arabella continued to be produced, albeit in greatly reduced quantities and branded as the Borgward Arabella until 1963. By the standards of the time and place it would have been defined as a small family car.

<span class="mw-page-title-main">Lloyd 400</span> Motor vehicle

The Lloyd 400 is a small car produced by the Borgward Group's Lloyd Motoren Werke GmbH in Bremen between 1953 and 1957.

<span class="mw-page-title-main">Goliath GD750</span> German pickup truck

The Goliath GD750 was a three-wheeler pickup truck built by the Goliath division of the Borgward Group in Bremen from April 1949 to 1955 in various body variants. In the early 1950s, low-cost vans were popular with small craft businesses. In 1949, the purchase price for flatbed variant was DM 3600. In total, 30,093 units of the GD750 were built. In 1950 and 1951, a huge quantity of vehicles were built, 8468 and 7136 units respectively. The number 750 in the type designation indicated the possible payload of 750 kg.

References

  1. 1 2 Kaack, Ulf (2012). "Minimalismus auf vier Rädern ... Lloyd LP 300". Borgward: Das Kompendium. GeraMond Verlag, München. pp. 77–79. ISBN   978-3-86245-667-3.
  2. 1 2 3 4 5 6 7 8 9 10 Oswald, Werner [in German] (2001). "Lloyd 300 (1950-1952)". Deutsche Autos 1945-1990. Vol. 4. Motorbuch Verlag, Stuttgart. pp. 424–425, 446–447. ISBN   3-613-02131-5.
  3. 1 2 Peter Kurze: Borgward Typenkunde. ISBN   978-3-7688-2599-3, pp. 9 -11
  4. Schmidt, Georg (1982), Borgward: Carl F.W.Borgward und seine Autos (in German), Motorbuch Verlag Stuttgart, p. 102, ISBN   3-87943-679-7
  5. 1 2 Werner Oswald [in German] (2003). "Volkswagen 1200 Standard-Modell (1954-1964)". Deutsche Autos 1945-1990. Vol. 3. Motorbuch Verlag, Stuttgart. pp. 8–9, 20–23, 36–37. ISBN   3-613-02116-1.