Lloyd Arabella (1959-1961) Borgward Arabella (1961-1963) | |
---|---|
Overview | |
Manufacturer | Carl F. W. Borgward GmbH |
Production | 1959-1961 47,042 made |
Body and chassis | |
Body style | 2-door saloon 2-door Sport coupé (Frua) |
Layout | FF layout |
Powertrain | |
Engine | 897 cc Boxer 4-cylinder |
Transmission | 4-speed manual Saxomat semi-automatic optional |
Dimensions | |
Wheelbase | 2,200 mm (87 in) |
Length | 3,800 mm (150 in) |
Width | 1,510 mm (59 in) |
Height | 1,395 mm (54.9 in) |
Curb weight | 730 kg (1,610 lb) (empty) 1,075 kg (2,370 lb) (loaded) |
The Lloyd Arabella was a passenger car produced by the Borgward Group in West Germany between 1959 and 1961. After the company's controversial bankruptcy the Arabella continued to be produced, albeit in greatly reduced quantities and branded as the Borgward Arabella until 1963. [1] By the standards of the time and place it would have been defined as a small family car.
The Arabella was the first (and as matters turned out the last) car from Borgward's Lloyd division to be fitted with a four cylinder engine. [2]
The Arabella was a completely new design, owing nothing to the Lloyd Alexander which it initially complemented and then replaced in the manufacturer's range. It was developed in just 23 months, [3] which later commentators have asserted was much too short a period in which to identify and eliminate "teething-troubles" ahead of launch. [2] It was constructed using a frame of tube-steel with cross-members.
The front wheels were suspended with double-wishbone connectors with coil springs and telescopic shock absorbers, and the back wheels on trailing arms with coil springs with and anti-roll bar. [1] The brakes, considered advanced at the time, were applied using a hydraulic linkage, with four light-alloy 200 mm brake drums. [1] The hand brake was operated mechanically and worked on the rear wheels. [1] Almost as innovative at the time was the specification of tubeless tyres on the 13" wheels. The rack and pinion steering required 3.36 between opposite locks, and the turning circle was 10.7 m (35 ft). [1] [4] [5] [6]
The all-steel body followed modern styling trends, and featured a "panoramic wrap-around" rear window and tail fins. There was space for four people, although the two in the back would have found their head room rather restricted. The sales material of the time makes much of the car's passive safety features, such as the two spoke steering wheel with a recessed central hub, rounded door handles and a lock on the front seat-backs to prevent them from tilting forwards unexpectedly. The padded dashboard and interior window frames were also unusual, and the claim can certainly be made that in terms of secondary safety (US English: "crashworthiness") the Lloyd Arabella marked a step forward for cars of this class. [7] The spare wheel was stowed below the rear luggage compartment. It was stowed externally which meant it could be accessed without having to empty out the luggage locker. [6]
It was originally planned to power the Arabella with an uprated version of the two cylinder four-stroke power unit used in the existing Lloyd Alexander, together with a suitably uprated gear box from the same car. However, testing of a chassis equipped with this combination indicated that would not all fit under the bonnet of the body, which by that stage had been finalised, so a four cylinder Boxer motor was hastily developed. The flat configuration of the boxer motor made it suitable for the low bonnet line of the stylish bodywork, but accommodating it in the available space remained a challenge and the cooling fan had to be squeezed in above the two cylinders on the left side of the engine bay. Unlike the smaller existing Lloyd models, the Arabella used water to cool its engine. The gear box was positioned ahead of the front axle and ahead of the engine, as on the manufacturer's smaller cars, but it had to be redesigned in order to fit beyond the engine in the relatively short engine bay. There was talk of installing the engine transversely, possibly in order to avoid having to redesign the gearbox to make it fit, but in the event the Arabella featured a longitudinally mounted boxer motor. [3]
On its introduction in August 1959 the Arabella featured a 4-cylinder 897 cc with a stated output of 38 PS (28 kW) at 4,800 rpm. [1] During 1960 it was necessary to impose a major price increase, and in order to soften the blow a reduced specification cut-price Arabella was launched in July 1960, still with the 897 cc engine, but now in a detuned form offering a maximum power output of only 34 PS (25 kW) at 4,700 rpm. [1]
In October 1960 a de luxe version of the Arabella was added to the range. As far as the technical specifications were concerned, the Arabella de Luxe was differentiated from the standard model by its engine. It was still a 4-cylinder 897 cc unit, but maximum power was increased to 45 PS (33 kW) at 5,300 rpm. This was achieved by increasing the compression ratio from 1:7½ on the standard model to 1:9. [1] That in turn meant that drivers had to pay a little more for their fuel, because the higher compression ratio necessitated the use of the "super" grade (high octane) petrol (gasoline) which was beginning to become available at West German service stations. The other important difference was the fitting of a larger Solex carburetor (34 PCI in place of the 28 mm carburetor used for the standard cars). [1] The result was a useful improvement in performance, with the top speed increased from 120 km/h to 133 km/h (from 75 mph to 83 mph), while the standing start time to 100 km/h was reduced from 28 to 23 seconds. [1] The Arabella de luxe was in these respects significantly brisker than more expensive (albeit larger and heavier) cars such as the Ford Taunus [8] or, more importantly, the class-defining Volkswagen [2] with its advertised top speed, in 1960, of only 112 km/h (70 mph) and leisurely standing start time to 100 km/h of 38 seconds. [9]
From the outside the Arabella de Luxe was differentiated by a revised radiator grille, featuring the traditional Borgward "rhombus" shape at its centre, and the name "Borgward" was written on the front of the car in place of the name "Lloyd", even though sources state that the car was only formally rebranded as the "Borgward Arabella" in 1961. It is possible that the need to clear unsold stocks of new cars meant that any announcement of a rebranding was deferred so that the cars identified with the "Lloyd" name on the front could be sold (as new cars) first.
The Lloyd Sportcoupé is generally identified, in retrospect, as a coupé version of the Lloyd Arabella. In fact the Sportcoupé, with a stylish body produced by Pietro Frua of Turin, made its debut at the Turin Motor Show in November 1958. At that stage it was powered by the 596 cc two stroke engine from the Lloyd Alexander TS, but the DM 6,000 asking price combined with the "rustic" sound and performance from the power unit made the car unsellable. [1] However, by this time the manufacturer had given Frua firm orders for 50 of the coupé bodies, and so the stylish little Sportcoupé reappeared at the Frankfurt Motor Show in September 1959, now as a coupé version of the Arabella. [1] By the time the cars were actually disposed of they were powered by the 45 PS (33 kW) "high compression engine" version of the Arabella. [1]
The Arabella was developed in just 23 months. [3] There was a price to be paid for the rushed development schedule in terms of a large number of niggling faults and one or two more serious ones. The passenger cabin leaked on rainy days. [10] The pattern of a pleasingly eye catching modern inherently robust new model from Borgward marred by "teething troubles" affecting the early cars was a familiar one for Borgward buyers through the 1950s, but by 1959 waiting lists were down and the West German car market had become far less forgiving. Early teething troubles caused massive damage to the image of the Lloyd Arabella, [1] [2] and large numbers of unsold Arabellas began to fill the undeveloped land beside the factory where the cars were assembled. [10]
Lloyd Arabella: Output (units) [1]
- 1959 ..... 5,428
- 1960 ... 32,887
- 1961 ..... 7,234
- 1962 ........ 600
- 1963 ........ 893
Considerable amounts of cash had been invested in the Arabella's development, including investment in a new assembly plant. Recovery of those costs from the sale of new cars necessitated a minimum level of sales, which the various technical niggles made unachievable in the market place. The car had been launched with a sticker price of DM 5,250. Less than a year later, in June 1960, the price was raised to DM 5,490, while the introduction of a cut-price reduced-performance version nevertheless enabled the manufacturer to advertise a "starting price" for the reduced-performance Arabella of DM 4,985. Meanwhile the West German small car market was increasingly dominated by Volkswagen. Volkswagen achieved sales volumes that more than covered necessary investment in upgrades for a car of which the basic architecture had not changed in more than ten years. The sticker price for a standard Volkswagen had been reduced in August 1955 to DM 3,790, where it stayed till September 1961 when it increased to DM 3,810. [11] Pricing strategy for the Arabella was reversed in November 1960 with a price cut for the standard model to DM 5,230. This coincided with the introduction of the more powerful de Luxe version, however, which was priced at DM 5,730. [1]
Information on sales volumes is unavailable, but production figures are known. [1] Between 1959 and 1963 47,042 Arabellas were produced, of which nearly 70% were produced during 1960. Following the company's bankruptcy in 1961, the Arabella was the only model that continued in production for another couple of years, with the plant now rented from its new owner, and 893 Arabellas produced in 1963 by a group of former employees who had acquired the necessary rights during the liquidation process. [1] Nevertheless, the size of the investment in developing and preparing to produce the Arabella, couple with the failure to sell it in sufficient quantities to recover the investment within a reasonable period, were a major contributor to the company's bankruptcy in 1961. [10]
Meanwhile, following the appearance of two show cars at the September 1959 motor show, the fifty Frua Sportcoupé bodies were mated with to the underpinnings of the Arabella and offered for sale, now at a price of DM 7,500. Despite the improved performance characteristics available from the larger engine, there was no market for a miniature Sportcoupé Arabella in Germany, and while the two cars that had appeared at Frankfurt turned up again at several subsequent European motor shows, the rest of the cars were eventually earmarked for export. Most of them ended up on the USA where they were used to grab attention in show rooms, and some of them found buyers as stylish second cars for the wives and daughters of one or two affluent buyers. [1]
DKW was a German car- and motorcycle-marque. DKW was one of the four companies that formed Auto Union in 1932 and thus became an ancestor of the modern-day Audi company.
The former Borgward car manufacturing company, based in Bremen, Germany, was founded by Carl F. W. Borgward (1890–1963). It produced cars of four brands, which were sold to a diversified international customer base: Borgward, Hansa, Goliath and Lloyd. Borgward's Isabella was one of the most popular German premium models in the 1950s, while Lloyd's Alexander / Lloyd 600 model offered affordable mobility to many working-class motorists. The group ceased operations in 1961, following controversial insolvency proceedings.
The Volkswagen Type 4 is a compact / midsize family car, manufactured and marketed by Volkswagen of Germany as a D‑segment car from 1968 to 1974 in two-door and four-door sedan as well as two-door station wagon body styles. The Type 4 evolved through two generations, the 411 (1968–72) and 412 series (1972–74).
Lloyd Motoren Werke G.m.b.H. was a German automobile manufacturer, created in 1908 and owned by the Norddeutscher Lloyd shipping company. The factory was in Bremen. The company operated under a variety of different names throughout the decades, but their products were nearly always badged with the Lloyd marque. Originally a manufacturer of luxury cars, the company was folded into the Borgward Group in 1929, with the brand not used on passenger cars again until 1950. Production ended for good in 1963, although a successor company continued trading until 1989, selling replacement parts, as well as manufacturing engines for snowmobiles and boats.
The Opel Admiral is a luxury car made by the German car manufacturer Opel from 1937 until 1939 and again from 1964 until 1977.
F103 is the internal designation for a series of car models produced by Auto Union GmbH in West Germany from 1965 to 1972, derived from the earlier DKW F102. To signify the change from a two-stroke to four-stroke engine, the DKW marque was dropped in favour of Audi, a name that had been dormant since before the Second World War.
The Borgward Isabella is an automobile which was manufactured by the Bremen based auto-manufacturer Carl F. W. Borgward GmbH from 1954 to 1962.
The Borgward P100 is a large four-door sedan first presented in September 1959 at the Frankfurt Motor Show, and produced by the Bremen based auto-manufacturer Carl F. W. Borgward GmbH between January 1960 and July 1961.
The Borgward Hansa 2400 was an executive six-cylinder saloon (E-segment) presented in 1951, and manufactured by the Bremen based auto-manufacturer Carl F. W. Borgward GmbH from 1952 until 1959. The car was launched as a four-door fastback saloon; a longer-wheelbase notchback version appeared a year later. The Hansa 2400 suffered from teething troubles including inadequate brakes and problems with the automatic transmission Borgward developed for it. In a small closely contested market, the large Borgwards lost out to less flamboyant models from the German south.
The DKW Junior is a small front wheel drive saloon manufactured by Auto Union AG. The car received a positive reaction when first exhibited, initially badged as the DKW 600, at the Frankfurt Motor Show in March 1957. The ‘Junior’ name was given to the DKW 750 in 1959 when the car went into volume production, but failed to survive an upgrade in January 1963, after which the car was known as the DKW F12. In addition to the saloon, a pretty ‘F12 Roadster’ was produced in limited numbers.
The Opel Olympia Rekord was a two-door family car which replaced the Opel Olympia in March 1953. Innovations included the strikingly modern Ponton format body-work incorporating numerous styling features from the United States and large amounts of chrome decoration both on the outside and on the inside.
The Ford Taunus P1 is a small family car which was produced by Ford Germany from 1952 until 1962. It was marketed as the Ford Taunus 12M, and, between 1955 and 1959, as the larger-engined Ford Taunus 15M. The company produced a succession of Ford Taunus 12M models until 1970, as the name was applied to a succession of similarly sized cars, but the first Taunus 12M models, based on the company's Taunus Project 1 (P1), remained in production only until 1962. In that year the Taunus P1 series was replaced by the Taunus P4 series.
The Ford Taunus 17 M is a middle sized family saloon/sedan that was produced by Ford Germany between August 1957 and August 1960. The Taunus 17M name was also applied to subsequent Ford models which is why the car is usually identified, in retrospect, as the Ford Taunus P2. It was the second newly designed German Ford to be launched after the war and for this reason it was from inception known within the company as Ford Project 2 (P2) or the Ford Taunus P2.
The Opel Rekord Series A is an executive car introduced in March 1963, by Opel as a replacement for the Opel Rekord P2. It was fractionally shorter but also wider than its predecessor with a wheelbase approximately 10 cm longer.
The Glas 1700 is a middle class four door saloon produced by Hans Glas GmbH at Dingolfing. The prototype was first presented in September 1963 at the Frankfurt Motor Show. Later versions of the coupé and cabriolet bodied Glas GT were also powered, in some cases, by the same engine as the saloon. The saloon was produced between August 1964 and December 1967, but the manufacturer never had the investment capital sufficiently to expand production capability and the model was discontinued after the by now badly indebted manufacturer was acquired by BMW.
The Glas V8 is a V8-engined coupé produced by Hans Glas GmbH at Dingolfing. The car was first presented in September 1965 at the Frankfurt Motor Show, where it became nicknamed the "Glaserati" because of its Frua design, which shared many themes with contemporary Maseratis.
The Glas Isar is a small two door four seater car produced by Hans Glas GmbH at their Dingolfing plant. The car was first presented as the Goggomobil T600 in September 1957 at the Frankfurt Motor Show, with volume production starting in August 1958.
The Lloyd 600 is a small car produced by the Borgward Groups's Lloyd Motoren Werke GmbH in Bremen between 1955 and 1961.
The Lloyd 400 is a small car produced by the Borgward Group's Lloyd Motoren Werke GmbH in Bremen between 1953 and 1957.
The Lloyd 300 was a small car produced by the Borgward Group's Lloyd Motoren Werke GmbH in Bremen between 1950 and 1952.
{{cite book}}
: |work=
ignored (help){{cite book}}
: |work=
ignored (help){{cite book}}
: |work=
ignored (help){{cite book}}
: |work=
ignored (help){{cite book}}
: |work=
ignored (help){{cite book}}
: |work=
ignored (help)