Ford Taunus P2

Last updated
Ford Taunus 17M
Ford P2 Kulmbach17RM0440.jpg
Overview
Manufacturer Ford Germany
Also calledFord Taunus P2
"“Barocktaunus “ (Baroque Taunus)
""Fliegender Teppich“"(Flying carpet)
Production1957–1960
Assembly Cologne-Niehl, Germany
Body and chassis
Class Executive car (E)
Body style 2- or 4-door saloon
3-door “Kombi” estate car
2-door coach-built (Karl Deutsch) cabriolet [1]
Powertrain
Engine 1698 cc 4-cylinder in-line water-cooled
Dimensions
Wheelbase 2,604 mm (102.5 in)
Length4,375 mm (172.2 in)
Width1,670 mm (65.7 in)
Height1,500 mm (59.1 in)
Curb weight 1,010–1,110 kg (2,227–2,447 lb)
Chronology
PredecessorNo direct predecessor
Successor Ford Taunus 17M P3

The Ford Taunus 17 M is a middle sized family saloon/sedan that was produced by Ford Germany between August 1957 and August 1960. The Taunus 17M name was also applied to subsequent Ford models which is why the car is usually identified, in retrospect, as the Ford Taunus P2. It was the second newly designed German Ford to be launched after the war and for this reason it was from inception known within the company as Ford Project 2 (P2) or the Ford Taunus P2.

Contents

Because of its unusually flamboyant styling the first 17M also acquired various descriptive soubriquets of which "Barocktaunus“ [1] is probably, today, the most widely used.

During a three-year production run 239,978 Taunus P2s were manufactured.

Development and launch

Side view FORD Taunus 17M P2 deLuxe.jpg
Side view
Front 3/4 view Ford Taunus P2.JPG
Front 3/4 view
Dash on the deluxe FORD Taunus 17M P2 deLuxe Steering wheel.jpg
Dash on the deluxe

The early sketches for Ford's new middle class sedan date from early in 1955. Originally it was intended that the car be powered by the 1498 cc ohv engine installed in the Taunus 15M which went on sale in the same year. The design for the body quickly grew too large and heavy for the 55 PS (40 kW; 54 hp) 1498 cc unit, however, and so the company developed a bored out 1698 cc version of the engine, now producing 60 PS (44 kW; 59 hp).

At the end of the summer of 1957, memorably, the car was launched at an upmarket Cologne restaurant by the singing star Gitta Lind. Lind's singing style was not one with wide appeal in most of the US or the UK, where she may be chiefly noteworthy as a great niece of Beethoven’s piano teacher. The singer’s own compositional talent was on display with the song she wrote for the occasion which was entitled "Fahren auch Sie den neuen Taunus 17M" ("You too [should] drive the new Taunus 17M"). The next month the Ford Taunus 17M itself appeared as one of the stars at the Frankfurt Motor Show.

Fashion statements

In addition to the relatively mild "baroque“ insult, Ford's new middle-weight quickly gained other informal names including "Gelsenkirchener Barock“ and "Fliegender Teppich“ (Flying carpet). Gelsenkirchener Baroque, a term frequently applied to the Taunus P2 in press reviews, was a style more generally associated with heavy furniture in the newly confident German empire during the closing decades of the nineteenth century. The style, which contrasted with the uncompromised functionalism more usually associated with German design in recent decades, enjoyed a brief revival in the 1950s. Competitor automakers at this time also emulated US styling cues, using large amounts of chrome on the body work and incorporating exaggerated fins, but in 1957 it was nevertheless hard to find any Borgward or Opel decorated with more chrome, nor featuring longer or larger tail fins than the Ford Taunus P2. The sharp “markers” atop the four wings of the car did nevertheless confer a practical benefit by making it very easy to determine, from the driver's seat, precisely where the car ended. The forward ones also positioned the turn signals high and in a spot where they could be seen through more than 180 degrees.

For buyers who found a standard Ford Taunus 17M unacceptably restrained, Ford offered the Taunus 17M deluxe: this provided a two tone paint finish, an interior enhanced with Brocade coverings, an exceptionally stylish steering wheel, a tachometer shaped like a kidney, [1] and even more chrome on the outside of the body. More than fifty years later the Taunus P2 has become very rare, and surviving examples tend to be of these deluxe versions.

The “Flying carpet” soubriquet seems to have been the response of a keen drivers to the company's attempts to give the car the ride and handling characteristics commensurate with its flamboyant bodywork, modelled on the North American boulevard cruisers of the day, set up for a country associated with straighter, wider and more even roads than those commonly encountered in Europe then or indeed now. The car was mostly inspired from the 1955 Ford, especially the Deluxe version that had the same styling as the American counterpart.

1955 Ford Crown Victoria.JPG
1955 Ford Fairlane Crown Victoria (USA)
Ford Taunus 17M deLuxe 1.JPG
1957 Ford Taunus P2 (Europe)
The comparisation between the 1955 Ford (USA) and the 1957 Ford P2 (Europe)

The French connection and the front suspension

The Taunus P2 seems to have been developed in close collaboration with Ford of France, and it closely resembled that company's Vedette model which itself emerged with enlarged tailfins in 1957. However, in 1954 Ford had sold a majority holding in its strike prone French operation to Simca, and although Ford retained a minority shareholding in the Simca business until 1958, the P2's French cousin, despite having been developed when the business was under Ford control, was in most markets badged as a Simca.

The Vedette had pioneered an independent front suspension system that involved incorporating an oil filled shock absorber within a spring in a manner intended to dampen the excessively rapid vertical movement of a simple steel spring. The resulting unit later became known as a MacPherson strut, and starting in 1951 with the British Ford Consul, Ford would fit them to many mainstream models produced by their German and British factories. The 1957 Taunus P2 was the first car from Ford Germany to feature a front end suspension configuration using MacPherson struts. The MacPherson strut arrangement would become known for combining good road holding and passenger comfort for a relatively low cost, but the shock settings on the Baroque Taunus nevertheless must have contributed to its informally awarded “Flying carpet” title

Bodies

The P2 came as a two- or four-door sedan/saloon. A three-door station wagon was also offered together with a van, which was in effect a station wagon with the side windows to the rear of the b-pillars replaced by steel panelling. The deluxe version was denoted with the letter “L” while the letters “CL” were reserved for a two-door cabriolet which was the result of a conversion performed by the traditional Cologne coach-builders Karl Deutsch GmbH. [1]

In retrospect the inclusion of a four-door sedan/saloon in the range seems unsurprising. However, the West German market, in contrast to the French and British markets, still had more of an appetite for two-door models in this category. [2] The Borgward Isabella of the time was never offered with more than two doors, and the two-door Taunus 17Ms of the period seem to have comfortably outsold the four-door versions.

1959 facelift

After the annual summer shut down in 1959 the Taunus P2 received a minor facelift in time for the 1960 model year which would be its final year of production. The roof line was flattened, reducing the height of the car by 3 cm (more than an inch). The chrome decorations on the car's body were rearranged. One of the results of that was that the basic model now flaunted the same front grill as the de Luxe model. On a more practical note, buyers paying extra for the four-speed transmission now enjoyed synchromesh on all four forward gears. Under the bonnet/hood September 1959 saw the introduction of a redesigned cylinder head and a slight increase in the compression ratio. There was no change in the listed power output or top speed resulting from this, but there was a 5% reduction in fuel consumption. [3]

Ford Taunus 17M (P2) production (units): [4]
  • 1957 16,520
  • 1958 81,133
  • 1959 77,508
  • 1960 61,372

Most of the cars produced were sedans/saloons, but the total of 239,978 also included 45,468 estate/kombi bodied cars and (evidently not included in these data) more than 3,000 cabriolets, converted from sedans/saloons by the Cologne based coach-builder Karl Deutsch.

1960 replacement

In 1960 the Baroque Taunus was replaced with the Bathtub Taunus (Badewanne). The application of affectionately disrespectful names to Ford’s German models seems by now to have become a habit for the German press. In terms of the company’s own nomenclatures 1960 was the year that the Ford Taunus P2 was replaced by the Ford Taunus P3.

Commercial

Between 1957 and 1960 Ford produced 239,978 Taunus P2s. [1] 45,468 of these were station wagons. This provided a welcome boost to the company’s domestic market share at a time when its only other mainstream model, the Ford Taunus P1 was lagging badly in the marketplace.

FORD Taunus 17M P2 deLuxe Tail fin.jpg

However, during the same three-year period Opel produced 817,003 of their Opel Olympia Rekord model which competed in almost the same class. Coming second to General Motors in the high volume market segments in West Germany (which would soon be Europe’s largest national auto-market) became a habit that Ford would find hard to break in the ensuring decades.

Reputation

Around the time the Taunus P2 was replaced by the Taunus P3 tail fins abruptly fell out of fashion even in the USA, which was generally seen as the country that had invented them. The Baroque Taunus had attracted adverse comment for its over-ornate styling even while in production, and the modern clean design shaped for the P3 by Ford’s new styling guru, Uwe Bahnsen, invited unfavourable comparisons between the old and the new models. Second-hand values for the P2 were never strong, and this combined with inadequate rust protection to ensure that few survived for long enough to acquire "oldtimer status".

Fifty years later, the car’s rarity and its 1950s style generate more positive reactions, at least among enthusiasts who are prepared to overcome the acute shortage of ready made replacement parts for the car.

Related Research Articles

Ford Anglia Car model

The Ford Anglia is a small family car that was designed and manufactured by Ford UK. It is related to the Ford Prefect and the later Ford Popular. The Anglia name was applied to various models between 1939 and 1967. In total, 1,594,486 Anglias were produced. It was replaced by the Ford Escort.

Ford Taunus Motor vehicle

The Ford Taunus is a family car that was sold by Ford Germany throughout Europe. Models from 1970 onward were built on the same basic construction as the Ford Cortina MkIII in the United Kingdom, and later on, the two car models were essentially the same, differing almost only in the placement of the steering wheel. The model line was named after the Taunus mountain range in Germany, and was first made in 1939, and continued through several versions until 1994.

Hatchback Car body configuration with a rear door

A hatchback is a car body configuration with a rear door that swings upward to provide access to a cargo area. Hatchbacks may feature fold-down second row seating, where the interior can be reconfigured to prioritize passenger or cargo volume. Hatchbacks may feature two- or three-box design.

Ford Cortina Car model

The Ford Cortina is a medium-sized family car that was built initially by Ford of Britain, and then Ford of Europe in various guises from 1962 to 1982, and was the United Kingdom's best-selling car of the 1970s.

Simca 1307 Motor vehicle

The Simca 1307 is a large family car produced by Chrysler Europe and subsequently PSA Peugeot Citröen from 1975 to 1986. Codenamed 'C6' in development, the car was styled in the United Kingdom by Roy Axe and his team at Whitley, and the car was engineered by Simca at Poissy in France.

Opel Olympia Motor vehicle

The Opel Olympia is a compact car by German automaker Opel, then part of G.M., from 1935 to 1940, and after World War II continued from 1947 to 1953. It was one of the world's first mass-produced cars with a unitary body structure, after the 1934 Citroën Traction Avant; and it was a mass-production success, made in six-figure numbers. Opel achieved this even before the war, all while Hitler promised Germany a "Volkswagen" - a 'People's car', which didn't materialize until 1946.
From 1967-1970 the Olympia badge was briefly reused on a later car.

Simca Vedette 1950s-1960s French car

The Simca Vedette is a large car, manufactured from 1954 to 1961 by French automaker Simca, at their factory in Poissy, France. The Vedette competed in France's large car market at a time when the economy was finally returning to growth, and enjoyed moderate success with its American style finished off by the Italian designer Rapi. It was marketed with different model names according to trim and equipment levels. The Vedette was Simca's largest model at that time and it spawned a more economical version, the Simca Ariane.

Simca Aronde Motor vehicle

The Simca Aronde is an automobile which was manufactured by the French automaker Simca from 1951 to 1964. It was Simca's first original design, as well as the company's first unibody car. "Aronde" means "swallow" in Old French and it was chosen as the name for the model because Simca's logo at that time was a stylized swallow.

1978 in motoring deals with developments in the automotive industry that occurred in 1978, listed by country. The automotive industry designs, develops, manufactures, markets, and sells motor vehicles.

Opel Olympia Rekord Motor vehicle

The Opel Olympia Rekord was a two-door family car which replaced the Opel Olympia in March 1953. Innovations included the strikingly modern Ponton format body-work incorporating numerous styling features from the United States and large amounts of chrome decoration both on the outside and on the inside.

Ford Taunus P1 Motor vehicle

The Ford Taunus P1 is a small family car which was produced by Ford Germany from 1952 until 1962. It was marketed as the Ford Taunus 12M, and, between 1955 and 1959, as the larger-engined Ford Taunus 15M. The company produced a succession of Ford Taunus 12M models until 1970, as the name was applied to a succession of similarly sized cars, but the first Taunus 12M models, based on the company's Taunus Project 1 (P1), remained in production only until 1962. In that year the Taunus P1 series was replaced by the Taunus P4 series.

Ford Taunus P3 Motor vehicle

The Ford Taunus 17 M is a middle sized family saloon/sedan that was produced by Ford Germany between September 1960 and August 1964. The Taunus 17M name had been applied to the car's predecessor and it would apply also to subsequent Ford models which is why the 17M introduced in 1960 is usually identified, in retrospect, as the Ford Taunus P3. It was the third newly designed German Ford to be launched after the war and for this reason it was from inception known within the company as Ford Project 3 (P3) or the Ford Taunus P3.

Ford Taunus P4 Motor vehicle

The Ford Taunus 12 M is a small family car that was produced by Ford Germany between September 1962 and August 1966.

Ford Taunus P5 Motor vehicle

The Ford Taunus 17 M is a middle-weight family saloon/sedan that was produced by Ford Germany between 1964 and 1967. The entire range was first presented in September 1964 and volume production of the two and four door saloons/sedans began in November 1964. The "Turnier" version followed in January 1965 with coupé bodied cars coming along some time later.

Ford Taunus P6 Motor vehicle

The Ford Taunus 12 M is a range of large family saloons/sedans that were produced by Ford Germany between 1966 and 1970. There were two different engine sizes in the 12M. Two larger engines were available in the otherwise very similar Ford Taunus 15 M. From the outside the 15M was differentiated by its grill and rectangular headlights from the 12M which had round front lights. A complicating feature was the availability, at extra cost, of one of the larger engines from the 15M in the 12M.

Ford P7 Motor vehicle

The Ford P7 is a range of large family saloons/sedans produced by Ford Germany between autumn 1967 and December 1971. The P7 was marketed as the Ford 17M, Ford 20M and Ford 26M.

Opel Rekord P1 Motor vehicle

The Opel Rekord P1 was an executive car introduced in August 1957, in time for the Frankfurt Motor Show, by Opel as a replacement for the previous year's Opel Olympia Rekord. It was larger than its predecessor and featured an eye-catching US-style wrap-around windscreen and rear window, reminiscent of its General Motors Luton-built cousin, the Vauxhall Victor F, which had appeared in England a few months earlier.

Opel Rekord P2 Motor vehicle

The Opel Rekord P2 is an executive car that was introduced in the summer of 1960, by Opel as a replacement for the Opel Rekord P1. It shared its 2,541 mm wheelbase with its predecessor, but was nonetheless a little longer and wider. The wrap-around windscreen which had been a defining element of the Rekord P1, and which had given rise to the P for "Panorama" designation, was now gone, but the P designation remained and the driver's view out, assisted by relatively thin A-pillars, remained good.

Opel Rekord Series A Motor vehicle

The Opel Rekord Series A is an executive car introduced in March 1963, by Opel as a replacement for the Opel Rekord P2. It was fractionally shorter but also wider than its predecessor with a wheelbase approximately 10 cm longer.

Ford Taunus TC Motor vehicle

The Ford Taunus TC is a range of large family cars that were built by Ford Germany from 1970 until 1982. The Taunus TC was based on the same basic construction as the Ford UK's Cortina range, with the "TC" badge standing for Taunus Cortina.

References

  1. 1 2 3 4 5 Oldtimer Katalog. Vol. Nr. 23. Königswinter: HEEL Verlag GmbH. 2009. pp. Seite 150. ISBN   978-3-86852-067-5.
  2. "Vor 20 Jahren (ie extracts from the same magazine of twenty years earlier)". Auto Motor u. Sport . Heft 25 1977: Seite 112. 7 December 1977.
  3. Oswald, pp 367 & 369
  4. Oswald 1945 - 90 (vol 3), p 357 & 369