Ford R series

Last updated

Ford R series
George Wards Ford R1114 - Plaxton PPE675R at the seaside 1978.jpg
Ford R1114 with Plaxton body
Overview
Manufacturer Ford
Assembly Dagenham
Body and chassis
Doors1
Floor type Step-entrance
Powertrain
Engine Diesel
Power output140 bhp
Transmission Manual or automatic
Dimensions
LengthR192 and R1014, 10 metres
R226 and R1114, 11 metres
Width2.5 metres
Height3.0 metres

The Ford R series was a range of single-decker bus and single-decker coach chassis, built by Ford that evolved from designs made by Thames Trader until the mid-1960s. A number of components were shared with the D-series lorry, including the engine which was mounted vertically at the front of the vehicle, ahead of the front axle so as to provide a passenger entrance opposite the driver. [1] The original R192 and longer R226 models later became the R1014 and R1114 variants (nominally 10 and 11 metres long respectively with 140 bhp engines) which with constant revision and upgrading had become R1015 and R1115 by the mid-1980s. In an attempt to lower the floor height of the vehicle, the turbocharged diesel engine was tilted over to one side around 1978. Synchromesh transmission was fitted as standard but some later examples were equipped with Allison automatic gearboxes to ease the driver's workload in urban areas. It ceased production in 1985. [2]

Contents

Hyundai licensed this bus to 'R Bus' in 1970s. [3]

Popularity

In the United Kingdom the design was popular during the 1970s, when considerable financial assistance was available to operators for fleet renewal, but following the election of the Conservative Government in 1979, the subsidy money began to dry up causing demand for full-size buses and coaches to decline and the last R series was built around 1986. Front-engined buses have generally fallen out of favour in Europe, as new accessibility requirements favour rear- or side-engined designs so a low front entrance can be provided. Few examples of the Ford R series remain in current passenger use, but many have gone on to second lives as mobile homes and stock car transporters.

Major users

A significant user of the type was Jersey Motor Transport, who, during the 1970s and 1980s, purchased little else. Its fleet consisted 100% of this bus model for several years during this period, and was chosen because of the manufacturer's willingness to supply chassis of non-standard width and length to suit local size limits. Many of these vehicles received bodywork by Duple whose narrow-width Dominant also found buyers on other chassis in the UK, but earlier examples were constructed by Willowbrook and later versions by Wadham Stringer. JMT also had a number of longer and wider examples, which had started life in the late 1960s with Trimdon Motor Services in North East England: these Plaxton-bodied buses required special dispensation to operate on the island, being restricted to certain services where the roads could accommodate them. All were sold for further use after a few years. A similar model was used by the Inner London Education Authority as school buses.

Related Research Articles

<span class="mw-page-title-main">Bus</span> Large road vehicle for transporting people

A bus is a road vehicle that carries significantly more passengers than an average car or van. It is most commonly used in public transport, but is also in use for charter purposes, or through private ownership. Although the average bus carries between 30 and 100 passengers, some buses have a capacity of up to 300 passengers. The most common type is the single-deck rigid bus, with double-decker and articulated buses carrying larger loads, and midibuses and minibuses carrying smaller loads. Coaches are used for longer-distance services. Many types of buses, such as city transit buses and inter-city coaches, charge a fare. Other types, such as elementary or secondary school buses or shuttle buses within a post-secondary education campus, are free. In many jurisdictions, bus drivers require a special large vehicle licence above and beyond a regular driving licence.

<span class="mw-page-title-main">School bus</span> Bus operated by a school or school district for student transport

A school bus is any type of bus owned, leased, contracted to, or operated by a school or school district. It is regularly used to transport students to and from school or school-related activities, but not including a charter bus or transit bus. Various configurations of school buses are used worldwide; the most iconic examples are the yellow school buses of the United States and Canada which are also found in other parts of the world.

<span class="mw-page-title-main">Ford E-Series</span> Line of vans by American automaker

The Ford E-Series is a range of full-size vans manufactured and marketed by the Ford Motor Company. Introduced for model year 1961 as the replacement for the Ford F-Series panel van, the E-Series line is currently in its fourth generation.

<span class="mw-page-title-main">Minibus</span> Passenger-carrying motor vehicle (12-30 seats)

A minibus, microbus, minicoach, or commuter is a passenger-carrying motor vehicle that is designed to carry more people than a multi-purpose vehicle or minivan, but fewer people than a full-size bus. In the United Kingdom, the word "minibus" is used to describe any full-sized passenger-carrying van or panel truck. Minibuses have a seating capacity of between 12 and 30 seats. Larger minibusses may be called midibuses. Minibuses are typically front engine step in vehicles, although low floor minibuses do exist and are particularly common in Japan. Minibuses may range in price from £2000 to nearly £100,000.

Plaxton is an English builder of bus and coach vehicle bodies based in Scarborough. Founded in 1907 by Frederick William Plaxton, it became a subsidiary of Alexander Dennis in May 2007. In 2019, the maker was acquired by Canadian bus manufacturer New Flyer which then became NFI Group.

<span class="mw-page-title-main">Dennis Dart</span> British rear-engined single-decker midibus

The Dennis Dart is a rear-engined single-decker midibus chassis that was introduced by Dennis Specialist Vehicles of Guildford, England in 1989, replacing the Dennis Domino. Initially built as a high-floor design, In 1996 the low-floor second generation Dennis Dart SLF was launched. In 2001, production of the Dart SLF passed to TransBus International, during which time it was sold as the TransBus Dart SLF; Alexander Dennis took over production in 2004, renaming the product as the Alexander Dennis Dart SLF.

<span class="mw-page-title-main">Seddon Atkinson</span> Company

Seddon Atkinson Vehicles Limited, a manufacturer of large goods vehicles based in Oldham, Greater Manchester, England, was formed after the acquisition in 1970 of Atkinson Vehicles Limited of Preston by Seddon Diesel Vehicles Limited of Oldham. In 1974, the firm was acquired by International Harvester, which sold it in March 1984 to the Spanish group Enasa which made it a subsidiary of Pegaso. In 1990, it became part of Iveco which used the brand for various types of specialised vehicles in the United Kingdom. The range of models produced included EuroMover, Pacer and Strato, which are aimed at refuse collection, recycling and construction operators.

<span class="mw-page-title-main">Leyland Titan (front-engined double-decker)</span> British double-decker chassis with front-mounted engine

The Leyland Titan was a forward-control chassis with a front-mounted engine designed to carry double-decker bus bodywork. It was built mainly for the United Kingdom market between 1927 and 1942, and between 1945 and 1969.

<span class="mw-page-title-main">Duple Coachbuilders</span> English coach and bus body manufacturer (1919-1989)

Duple Coachbuilders was a coach and bus bodybuilder in England from 1919 until 1989.

<span class="mw-page-title-main">Cutaway van chassis</span>

Cutaway van chassis are used by second stage manufacturers for a wide range of completed motor vehicles. Especially popular in the United States, they are usually based upon incomplete vans to be bigger or smaller than pickup trucks and SUVs made by manufacturers such as Chrysler, Ford, and General Motors which are generally equipped with heavier duty components than most of their complete products. To these incomplete vehicles, a second stage manufacturer adds specific equipment and completes the vehicle. Common applications of this type of vehicle design and manufacturing includes small trucks, school buses, recreational vehicles, minibuses, and ambulances. The term "cutaway" can be somewhat of a misnomer in most of the vehicle's context since it refers to truck bodies for heavy-duty commercial-grade applications sharing a common truck chassis.

<span class="mw-page-title-main">Leyland Atlantean</span> Rear engined double decker bus

The Leyland Atlantean is a predominantly double-decker bus chassis manufactured by Leyland Motors between 1958 and 1986. Only 17 Atlantean chassis were bodied as single deck from new.

<span class="mw-page-title-main">AEC Regal VI</span> British underfloor-engined single-decker bus chassis

The AEC Regal VI was an underfloor-engined single-decker bus chassis manufactured by AEC in the 1960s. It was unveiled at the 1960 Commercial Motor Show and was intended to be a purely export chassis. It was an updated version of the underfloor-engined AEC Regal IV, having an 11.3-litre AH690 engine instead of the Regal IVs 9.6-litre AH590 engine. It was available in both left and right hand drive versions, other options included power assisted steering and air suspension.

<span class="mw-page-title-main">Bristol Lodekka</span> British low-height double-decker bus

The Bristol Lodekka was a half-cab low-height step-free double-decker bus built by Bristol Commercial Vehicles in England. It was the first production bus design to have no step up from the passenger entrance throughout the lower deck; although Gilford and Leyland Motors had developed low floor city buses in the 1930s, these did not enter production.

<span class="mw-page-title-main">Charles H. Roe</span> British bus manufacturing company

Charles H Roe was a Yorkshire coachbuilding company. It was for most of its life based at Crossgates Carriage Works, in Leeds.

<span class="mw-page-title-main">Daimler Fleetline</span> British rear-engined double-decker bus chassis

The Daimler Fleetline is a rear-engined double-decker bus chassis which was built between 1960 and 1983.

<span class="mw-page-title-main">Bus manufacturing</span> Manufacture of buses and coaches

Bus manufacturing, a sector of the automotive industry, manufactures buses and coaches.

<span class="mw-page-title-main">History of Lothian Buses</span>

Lothian Buses is the largest provider of bus services in and around Edinburgh, the capital city of Scotland. It is entirely municipally owned, being 91% owned by the City of Edinburgh Council, with the remainder owned by Midlothian, East Lothian and West Lothian councils, although it no longer provides bus services in West Lothian under the same name. Lothian Buses plc is registered in Annandale Street, Edinburgh as company number SC096849.

<span class="mw-page-title-main">Leyland Tiger (front-engined)</span> Motor vehicle

The Leyland Tiger was a heavyweight half-cab single-decker bus and coach chassis built by Leyland Motors between 1927 and 1968, except the period of World War II.

H. V. Burlingham was a British coachbuilding business based in Blackpool, Lancashire from 1928 until 1960 when they were taken over by London-based rivals Duple Motor Bodies. Duple initially renamed Burlingham as Duple (Northern) but in 1969 they closed their Hendon factory and concentrated production in Blackpool. Duple coach bodies were built in the former Burlingham premises until Duple itself was liquidated in 1989.

The Leyland Royal Tiger PSU was an underfloor-engined bus and coach chassis manufactured by Leyland between 1950 and 1954.

References

  1. R-Series Commercial Motor 21 June 1968
  2. Ford drops R-series Commercial Motors 13 April 1985
  3. 보배드림 20 April 2006